Track Creation
PROBLEM:
When I create a track it always ties itself into the track i had before. So when i try to add a track and then change the instrument or add an effect it adds it to the previous track as well.
So basically i want to create a track and have it act alone. I use the keyboard shortcut of Command-Return to create tracks.
And it wont link them in any way to the previous track.
MEANING
If i add a compressor to one track it wont add it to them all?
-Frisco
Similar Messages
-
Hello NWDI gurus!!
I have a few questions regarding track creation process in NWDI.
In our environment here, we have Portal development going on... We have the following systems in our landscape... Portal dev, Portal Sandbox, Portal Q, Portal Prod and Portal training systems.
1. Now, when setting up the NWDI tracks, how do I go about creating tracks? How many tracks are required for a well planned landscape?
2. Now, how do we relate the runtime systems Dev, Cons, Test and Prod to the physical systems Dev, Sandbox, Q, Prod and Training systems?
Could anybody throw some light on how we can design the tracks in our landscape?
Thanks much in advance
~~LBcheck this link
http://help.sap.com/saphelp_nw04s/helpdata/en/43/e99618e1582d53e10000000a422035/frameset.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c05ae1f2-e2f8-2a10-a19d-c36ef0999ab3
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f03cd0f1-77c7-2b10-8093-de20e973c3fb
Thanks
Bala Duvvuri -
I've created a long audio file in LE7, bounced it to a .WAV and now I want to burn it to CD. My problem is I would like to insert track markers so that I won't have to rewind and fast forward to a particular point in the song after it's burned to CD. Can LE7 do this? if not any suggestions on what can (on a mac platform, I know CD architect on PC platform can)?
I'LL GIVE YOU A SUGGESTION!!!! STOP YELLING!!!!!
you are going to be better off using a program like bias peak le or upgrading to logic pro. upgrading to logic pro will give you waveburner which will do what you are trying to accomplish, but peak le is the best and cheapest way in my opinion to accomplish your task.
www.bias-inc.com
watch the peak le tutoials. there is one that shows you how to do exactly what you are trying to do.
also for all i know iTunes 7 might create seamless cd creation. do some reasearch, and calm down.. -
Hello experts,
I need some help with configuring a track for 7.4 development.
I created a track for 7.4 development and made sure all necessary software components and their dependencies are defined in sld.
As I read lots of documentation on creating tracks on previous versions, the only point that was not covered is as follows:
How do I initially check in some of the necessary SC´s (common ones that are used by custom applications as KMC-CM, EP-BASIS, etc.) into the track.
After I import the development configuration via nwds, I can see all components that I assigned.
But those are empty. May you help me with some hints / documentation on this issue?
Maybe you could tell me the steps I need to follow?
Best regards,
AndréHi André,
you need to check-in (on CMS webui -- Transport Studio -- Check-In tab) and import the SCs into Development and Consolidation. Before these steps it makes no sense to start NWDS and import the devconfig because the SCs will be empty as you have just experienced. In order to check-in SCs, you need to have the files physically in the Transport folder (you can find out this way where it is: go to CMS webui -- Landscape Configurator -- Domain Data and there you'll find the transport folder. Now the SCA files have to be put into <your transport folder>/CMS/inbox).
You can download the SCA files from the Service Marketplace.
An example for 7.4 EPBASIS SP10:
http://service.sap.com/patches --> Browse our Download Catalog --> SAP NetWeaver and complementary products --> SAP NetWeaver --> SAP NETWEAVER 7.4 --> Entry by Component --> Enterprise Portal --> PORTAL BASIS 7.40 --> EPBASIS10_0-20010035.SCA
I hope this helps.
Regards,
Ervin -
Track creation contest! april 1st-30th
Hey everyone, I work with a software synth company called KeyToSound, and we're doing a contest beginning April 1st to the 30th with http://www.trackbattle.org. The overall gist of it is this: download Remedy, the free synth from http://www.keytosound.com, then make an entire song (maximum length 3 minutes, any genre is acceptable) using only Remedy - this includes drums - and upload your .mp3 somewhere where you can post a link to it in the Trackbattle Remedy Contest forums. At the end of April, KeyToSound and Trackbattle will pick the top ten submitted tracks, and then Trackbattle users will vote on the best overall track, with the winner receiving a full boxed version of KeyToSound's Nexsyn Soft-synth!
You can find full rules and more information and join the forums at Trackbattle.org. Get cracking! We want to hear what everyone can do!Hi Surya
Having thousands of order is not a reason for not doing period end processing.. When you have a kid, you need to take care of its basic needs.. LIkewise, when you have SAP, there are some basic rules you need to follow to have max benefit of the system and Period end processing is one of them
If the child troubles a lot, we opt for a nanny or day care.. Similarly, there is a Day care option i can suggest
Go for Decoupling scenario wherein your PP guys will do their transactions in Prod orders and you accumulate costs in a PCC i.e. cost collector
In your Order type for Prod orders, you have a dropdown box to choose "Cost Collectors".. Once you tick it, you will need to create a PCC for every product
Qty will be accumulated in Prod orders and Qty/Cost will be accumlated in PCC..
For all practical purposes, Logistics will follow discrete and you will follow periodic scenario in CO
This reduces the no of objects to be processed in month end.. Instead o 100 orders for a product, you will process only one Per product i.e. PCC
br, Ajay M -
Track Creation com.sap.sdm.apiimpl.remote.client.APIClientSessionFactory
Dear All,
While creating a track for our CE 7.2 system on our NWDI (NW 7.0 EHP1 SPS04) we are getting an exception
cannot create a connection for the buildspace: SID_APPL_D //connect to deploy tool failed:Exception occurred while calling createAPI
ClientSession of Class com.sap.sdm.apiimpl.remote.client.APIClientSessionFactory
Impl - java.lang.NullPointerException: null
We are using the following option in the Runtime system definition
SID
Deployment Controller
Port : 5<xx>05 where xx is our instance number for CE
Hostname
Username adn password
I cannot understand why this exception is coming though all parameters are defined correctly
Any inputs?
Thanks
ChanHi,
1. I believe you need to use 5<xx>04 instead of 5<xx>05.
2. Make sure user has proper rights for deployment.
@ John: Runtime Systems should be the CE systems.
Hope this helps.
Cheers-
Pramod -
DTR workspace is not modifiable-not able to EDIT track DC- in NWDS.
Hi,
i am not able to EDIT in my project that i creted from ESS track of NWDI.
i am getting the following error:-
Checkout is not possible. See below for details.
Component com.sap.xss.hr.per.us.bank.cc.CcPerBank
======>problem: DTR workspace is not modifiable /DID_ZTECH_Dessusbanksap.com/Model Folder/src/packages/com/sap/xss/hr/per/us/bank/cc/CcPerBank.txvWDComponentDiagram
======>problem: DTR workspace is not modifiable /DID_ZTECH_Dessusbanksap.com/src/packages/com/sap/xss/hr/per/us/bank/cc/CcPerBank.wdcomponent
please suggest me the needful
thanks
Narpalok thank for reply.
i can modify now my code but when i have created the track i have given my development server details under runtime. But i chaned that once QA1 by mistake and later relized then again reverted back to development.
so in this case do i need to import/check-in all software component again in my track?
Now i am having the original system details.(that i gave at the time of track creation and import ESS).
thanks
Narpal S Sihag -
Some DCs are not available locally - NWDS error while importing Track confg
Hi,
We have configured NWDI in our landscape.
As per the requirement of the developers, we have created a new product and software component (SC) in SLD, as they don't want to use any standard components.
The same has been synced with CMS using update CMS.
Now a new track is created (in landscape configurator) and the new SC has been added to the track. Track creation was successfull....given the sdm passwords for all 3 systems.
While saving a pop-up came saying that as the SC is New (i did not select the developed option), I need to Check-in and Import into DEV manually.....I GOT STUCK HERE.
What files needs to be checked-in in Transport studio?
Also when developers are trying to import the configuration in their respoective NWDS...they are getting "Some DCs are not available locally" error.
Also updated the patch of their NWDS but still no use.
Could any one help me out.
Regards,
SivDear Satya,
As per your advise. I have maintianed the 3 dependencies for the SC.
However, the error "Some DCs are not available locally" is still recurring in NWDS.
Below is few line from log,
Jul 14, 2009 6:49:13 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: RIB_SAPPS: Build failed for sap.com/RIB_SAPPS(arg_PRIMAVERACUSTOMIZATION_1) in variant "default": Used component not found: sap.com/tc/bi/bp/webDynpro
Jul 14, 2009 6:49:13 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: RIB_SAPPS: Build failed for sap.com/RIB_SAPPS(arg_PRIMAVERACUSTOMIZATION_1) in variant "default": Check for used DCs failed: Used component not found: sap.com/tc/bi/bp/webDynpro. DC not found in DC syncdb.
Build log -
Development Component Build (2009-07-14 18:49:13)
Component name: RIB_SAPPS
Component vendor: sap.com
SC compartment: arg_PRIMAVERACUSTOMIZATION_1
Configuration: EPD_ARG_D
Location: EPD_ARG_D
Source code location: http://den2:50100/dtr/ws/ARG/arg_PRIMAVERACUSTOMIZATION/dev/inactive/DCs/sap.com/RIB_SAPPS/_comp/
DC root folder: C:\Documents and Settings\sa45572\.dtc\1\DCs\sap.com\RIB_SAPPS\_comp\
DC type: Web Dynpro
Host: CMR-2FL0565
DC Model check:
All used DCs are available locally
ERROR: Check for used DCs failed: Used component not found: sap.com/tc/bi/bp/webDynpro. DC not found in DC syncdb.
Build failed with errors.
Jul 14, 2009 6:48:50 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.actions.dc.UsedDCFoundHandlerBase) [Thread[main,5,main]] ERROR: failed to resolve reference "sap.com/tc/wdp/metamodel/content" for DC "arg_PRIMAVERACUSTOMIZATION_1:sap.com/RIB_SAPPS":Cannot find compartment of used component: sap.com:tc/wdp/metamodel/content
Regards,
Siv -
CDHDR / Change numbers (add new TCODE tracking)
Hello SAP users,
I want to track creations of equipements in CDHDR.
=> Obectclas = 'EQUI' and TCODE = 'IE01' OR 'IE08'.
Currently, I'm able to track modification (tcode = 'IE02') but I can't manage to add handler on creation transaction.
I'm sure it is possible because, for the MATERIAL object I've new entry following updates and creation with TCODE = MM01 or MM02
Do you know what customizing must I do ?You have to implement note 658193 to get CDHDR entries when an equipment is created in IE01.
Do not implement the note, if DIMP component installed in your system.
You can trigger workflow events without implementing the note by checking WFE checkbox in the equipment categories configuration.
If the above mentioned note is already in ur system, it adds a new check box to equipment categories config, Just turn it on.
Regards
Sridhar
Message was edited by: Sridhar K -
Error while building the DC and deploying it.
Hi,
I have done all the while Post Installation Steps of Usage Type DI.
The SAP Link followed was :
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/68d64260752a78e10000000a155106/frameset.htm
This is first time, I am configuring SAP NEWDI.
The server installed is: sap.com/SAP-JEECOR 7.01 SP4 (1000.7.01.4.0.20090417015900
which looks SAP NetWeaver 7.0 EHP1 SP4.
The DB installed is: DB2/NT64 (SQL09050)
The Java Virtual Machine details in the server is:
VM system properties...
Name: Java HotSpot(TM) 64-Bit Server VM
Vendor: Sun Microsystems Inc.
Version: 1.4.2_21-b03
Now, I also installed SAP NWDS 7.01.04 which is SAP NWDS 7.0 EHP1 SP4, I think.
I did some mistakes while doing Post DI Steps.
The track and sc can be successfully imported to SAP NWDS
and I am able to build dcs on that sc.
Now, while doing the step build from Java WebDynpro perspective,
I am getting the build error.
I am pasting the errors.
Kind Status Priority Description Resource In Folder Location
Warning [Warning]: Path in Classpath for file webdynproadmin.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Path in Classpath for file webdynproclientserver.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Path in Classpath for file webdynpromodel_dynamicrfc.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Path in Classpath for file webdynpromodelimpl.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Path in Classpath for file webdynproprogmodel.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Path in Classpath for file webdynproruntime_designtime_coupling_api.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Path in Classpath for file webdynproruntime_designtime_coupling.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Path in Classpath for file webdynproruntime_repository_pmr.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Path in Classpath for file webdynproruntime_repository.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Path in Classpath for file webdynproservices.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Path in Classpath for file SapDictionaryTypeServices.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Path in Classpath for file SapDictionaryTypesRuntime.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Path in Classpath for file SapMetamodelWebdynproContent.zip not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Version for file webdynproadmin.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Version for file webdynproclientserver.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Version for file webdynpromodel_dynamicrfc.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Version for file webdynpromodelimpl.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Version for file webdynproprogmodel.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Version for file webdynproruntime_designtime_coupling_api.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Version for file webdynproruntime_designtime_coupling.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Version for file webdynproruntime_repository_pmr.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Version for file webdynproruntime_repository.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Version for file webdynproservices.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Version for file SapDictionaryTypeServices.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Version for file SapDictionaryTypesRuntime.jar not found. DJ1_DEV_Dhometestarpita~sap.com
Warning [Warning]: Version for file SapMetamodelWebdynproContent.zip not found. DJ1_DEV_Dhometestarpita~sap.com
Error com.sap cannot be resolved (or is not a valid type) for the field TestApplArpita.logger TestApplArpita.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp line 29
Error com.sap cannot be resolved TestApplArpita.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp line 30
Error com.sap cannot be resolved TestApplArpita.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp line 37
Error com.sap cannot be resolved (or is not a valid type) for the field TestApplArpita.wdControllerAPI TestApplArpita.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp line 72
Error com.sap cannot be resolved (or is not a valid type) for the field TestApplArpita.wdComponentAPI TestApplArpita.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp line 81
Error wdControllerAPI cannot be resolved or is not a field TestApplArpita.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp line 87
Error The method wdGetAPI() is undefined for the type IPrivateTestApplArpita TestApplArpita.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp line 87
Error wdComponentAPI cannot be resolved or is not a field TestApplArpita.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp line 88
Error The method wdGetAPI() is undefined for the type IPrivateTestApplArpita TestApplArpita.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp line 88
Error Location cannot be resolved InternalTestApplArpitaInterfaceView.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp line 25
Error com.sap cannot be resolved (or is not a valid type) for the field InternalTestApplArpitaInterfaceView.wdAlterEgo InternalTestApplArpitaInterfaceView.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp line 30
Error IWDNode cannot be resolved (or is not a valid return type) for the method wdGetRootNode InternalTestApplArpitaInterfaceView.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp line 41
Error IWDAction cannot be resolved (or is not a valid return type) for the method wdCreateAction InternalTestApplArpitaInterfaceView.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp line 51
Error wdAlterEgo cannot be resolved InternalTestApplArpitaInterfaceView.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp line 52
Error IWDAction cannot be resolved (or is not a valid return type) for the method wdCreateNamedAction InternalTestApplArpitaInterfaceView.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp line 61
Error wdAlterEgo cannot be resolved InternalTestApplArpitaInterfaceView.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp line 62
Error com.sap cannot be resolved (or is not a valid type) for the argument alterEgo of the method InternalTestApplArpitaInterfaceView InternalTestApplArpitaInterfaceView.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp line 70
Error com.sap cannot be resolved (or is not a valid return type) for the method wdGetAPI InternalTestApplArpitaInterfaceView.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp line 78
Error com.sap cannot be resolved InternalTestApplArpitaInterfaceView.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp line 79
Error wdAlterEgo cannot be resolved InternalTestApplArpitaInterfaceView.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp line 79
Error logger cannot be resolved InternalTestApplArpitaInterfaceView.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp line 86
Error logger cannot be resolved InternalTestApplArpitaInterfaceView.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp line 87
Error logger cannot be resolved InternalTestApplArpitaInterfaceView.java DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp line 94
Info TextView DefaultTextView: UIElement does not have a label TestApplArpitaView.wdview DJ1_DEV_Dhometestarpita~sap.com/src/packages/com/vmp/wdp
After that it is possible to successfully deploy the application after that,
but while running the application, I am getting runtime error.
500 Internal Server Error
SAP NetWeaver Application Server 7.00/Java AS 7.00
Failed to process request. Please contact your system administrator.
Root Cause
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create delegate for com.vmp.appl.Test_dev_comp: no suitable constructor. (Hint: Does the generation version match the runtime version?)
at com.sap.tc.webdynpro.progmodel.generation.ControllerHelper.createDelegate(ControllerHelper.java:103)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.<init>(DelegatingComponent.java:51)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:382)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
... 23 more
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create delegate for com.vmp.appl.Test_dev_comp: no suitable constructor. (Hint: Does the generation version match the runtime version?)
at com.sap.tc.webdynpro.progmodel.generation.ControllerHelper.createDelegate(ControllerHelper.java:103)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.<init>(DelegatingComponent.java:51)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:382)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Now some points I need to tell about the NWDI:
In the , Post Installation Steps of Usage Type DI:
I need some points to be clarified in:
Preparing the System Landscape Directory.
1. Activate the SLD Server
While doing this step,
1. Open the SLD Web UI under the URL http://<server>:<port>/sld.
2. Open the initial page of the SLD Web UI and log on as an administrator.
3. On the initial page, choose Administration and in the section Server u00AE Profile.
The system displays the Parameters screen.
4. ChooseSection u00AEServer Settings.
5. Enter a reserved SAP NetWeaver namespace in the input field Object Server. Keep the preset working directory in the input field Working Directory. Select the values for persistency and write protection. Save your entries.
The object server name was localhost. I think this needed to be changed to the FQDN
of the server were the J2EE Engine is running say hclprd09.hcltech.com (or it would be the SID of the J2EE Server, that is DJ1).
The other values are now set to:
Persistence Type: Database
Working Directory: E:\usr\sap\DJ1\SYS\global\sld
Write Protection: None
Then the next step is:
Import the SAP Master Component Information.
1. On the SLD initial page, choose Administration and in the section Content u00AE Import.
2. Choose Import CR Content (this switch appears only before the content import has been executed once. By default, this is a step during installation).
The SLD server starts the import of the SAP Master Component Information. This process can take some time.
For this we have to use the file:
F:\usr\sap\DJ1\SYS\global\sld\model\CR_Content.zip
Is this step mandatory?
If I do the step will I have to recreate the users, roles, worksets and iviews again.
As some developments are already there.
So, importing the CR_Content.zip will overwrite or destroy all those roles, iviews etc.
Now, also in giving the name prefix for the development component for user kaba
has been given by me as sap.com.*
I think this is wrong as the DC is produced by my company and not by SAP.
Then I followed all other steps as written.
Give me your suggestions where I might be wrong.
Regards
KaushikHi Neha,
Yes, till now; you are right.
The Product and sc has been created in
http://<host name>:<port>/devinf
The steps followed are written below:
1> Now Click on System Landscape Directory and create Product.
2> After entering Name, Vendor and Version for Product. Click on Create..
3> Product is created now it will ask for name of Software Unit.
4> Specify name and click on Create.
S/w Unit is created now it will ask inputs for S/w Components.
Provide all the necessary inputs for S/w Components and keep Production State as released.
Click on create.
Now select your Software Component and click on the Dependencies tab in the lower half of screen.
Select Build Time as Context and click on Define Prerequisite Software Components Versions
Now on next page search for three basic dependencies those are.
SAP J2EE ENGINE 7.00
DI BUILD TOOL 7.00
SAP JAVA TECH SERVICES 7.00
This is screen shot for SAP JAVA TECH SERVICES 7.00
Repeat the same process for the other two steps also search word will be *DI* for DI BUILD TOOL 7.0
*SAP J2e* for SAP JAVA TECH SERVICES 7.00
Domain Configuration and Track Creation
Now navigate to Landscape Configurator and click on Domain Data.
Enter all the required inputs in the screen below Click on Save and Update CMS.
Update CMS is very important step do not forget it.
Now click on Track Data and click on New.
Enter all the required inputs in the screen below
On the next page, search for your Software Component and click on ADD.
Click on Runtime Tab on the Top and Select System as per your requirement.
Enter the required Inputs and click on Save.
Now click on Transport Studio on top and select Check In now select all three Dependencies and click on Check In Button.
Now Click on Development Tab on top and Select All 3 Dependencies and Click on Import
Look at the status now it should say Import finished.
Your track is now created, configured & ready to use for development component in NWDS.
But mistake,
I should have added
SAP J2EE ENGINE 7.00
DI BUILD TOOL 7.00
SAP JAVA TECH SERVICES 7.00
Also, I removed prequisite software dependicies from SAP J2EE ENGINE.
Now what to do?
Do I need to import CIM Model Data?
Would it help?
Regards
Kaushik -
I think I'm going to lose my mind. I'm new to Logic 7, and I can't seem to consisently create new tracks without something bizzarre happening.
I went to the Environment to create a new stereo Aux for routing some tracks to. I said "Create New Audio Object." I tried to make out from the pop up list of AUXes used which was new and available, and chose it. In order to make it show up in the Arrange Window, and I suppose therefore the MIXER window, I Command clicked it. Now it REPLACES whatever track in the ARRANGE window was highlighted. And you can't seem deselect all tracks so nothing is highlighted in the arrange. So this new Audio Object, upon trying to get it to show up, REPLACES tracks. So my audio acoustic guitar track is now the new AUX. Oops. REVERT TO SAVED.
Help. This track creation thing is just nutty. Even the manual says to use CREATE NEW TRACK, and doesn't tell you that in the ARRANGE WINDOW this results in a COPY OF THE ABOVE TRACK. Geez. Insane.
So how do create an AUX in the Environment, make it show up in the mixer and or arrange, and NOT have it replace an existing track in the arrange?
Thanks so much
TomThanks Donald.
Boy, you know, the most dependable way I have found to do it so it always works is...
What you say. I have 48 audio tracks in my autoload environment. I just go to arrange (when I need audio tracks, not instrument tracks) and add a bunch of tracks. Then I do your trick....I drag the audio tracks from the environment over the arrange window and everything is happy.
This solved a nightmare I had tonight. I was importing audio, and therefore need audio tracks. I decided to start SLOWLY, and created ONE audio track in the arrange window. I assigned to TRACK 1. Then dragged a file from the audio window into the arrange and placed it. I then named it immediately (Create Track Name). I kept doing that for about 28 tracks. When I was done, it was a mess. Things that I had named BASS were playing floor toms, etc. I would rename the floor tom track to Floor Tom, then look up, and the actual bass track changed its name to Floor Tom as well. Oh geez. I just deleted everything, and dragged the audio tracks from the Environment as I said, and finally got what I needed.
Some of this is me, I know, but there are honestly some serious bugs in this program. I had two guitar tracks playing just fine, and after switching windowsets around all of a sudden they were gone. I mean, NOT PLAYING. I went to the Environment to find them. Still Gone. Like they VANISHED from the program. I finally just reimported their audio.
It's like wrestling with a big polar bear, this Logic;)
Thanks for all your help. Let's hope Apple....king of the easy interface, gets this program in shape in the next century....;)
Tom -
Use of ERP Infoset inside ABAP program
Hello experts,
I created a quite complex InfoSet which is supposed to extract business relevant information from FI tables (above all BSID and BSAD) and provide them to users as a mean to interpret data. I'd like to use those data in a custom ABAP program with an extended logic, but I'm not sure how to use it inside my code.
The final result should be to send daily updates on BSAD activities to BI system, and given that BSAD does not have (as far as I know) any mean to completely track creation/modify actions, I came out with the InfoSet solution that make use of an additional field (called update_timestamp) derived from a complex query.
Any help/suggestion on how to overcome the issue will be greatly appreciated.
Best regards
Davide RizzoHi
Yes it's true.
If you put "#ec * at the end of a abap code row, you can suppress the warnining messages of extended program check.
Every kind of warning has own sign, you find out them while running extended check.
It's a way to clear the useless messages.
For example, you have created an include where you have defined several routines you have to use in several programs, but every program don't use all routines of that include, or you dynamically call those routines, so if you run the extend check for a certain program you can get a warning like that:
FORM PLUTO not called directly
Now you can't delete the routine from the include, because it can be used by other program, but you can hide that message by "#ec CALLED:
FORM <MY_FORM>. "#EC CALLED
ENDFORM.
Max -
Modify VcCatRecordEntry WD Java component
Hi,
I have been tasked with implementing OSS note 1371294, which requires a change to Java Web Dynpro component VcCatRecordEntry. I know this question has been asked previously, but is there a way of creating a NWDS project for the component which is packaged in sap.comesscat, in which is contained the component that needs to be modified.
I have managed to extract the ess~cat.SDA package. Any help or a links to documentation would be a great help and would be much appreciated.
In anticipation,
John Kuriakose
Edited by: John Kuriakose on Oct 30, 2009 12:29 PMJohn,
You need to create a track and import the code into NWDS and then create a project out of DC.
check thse links
Track Creation u2013
- http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f03cd0f1-77c7-2b10-8093-de20e973c3fb
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b01f7f17-136e-2c10-428c-e9414a02a3af&overridelayout=true
http://help.sap.com/saphelp_nw04/helpdata/en/cc/b809d65cff400684dd6c7d8ce5626e/frameset.htm
Modifying the code u2013
/people/vinoth.murugaiyan/blog/2007/08/24/essmss-customization-150-make-it-simple
Thanks
Bala Duvvuri -
Hi All,
We need to configure NWDI for my Client
I need procedure to configure NWDI in Admin side
which stepd to need fallow and I want to know from starting point i.e installation part also
and connection with Webdynpro java to NWDI
Cretion of Tracks , DC's Common libraries etc..
If any body have good knowledge please share ..
Thanks
RenuRenu,
Go through this doc. http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f04a930b-893f-2b10-1bb1-85fcd51030aa
It lists out NWDI admin configuration as well as track creation.
Hope it helps,
Ameya -
Hi,
Issue: CMS transport option is not displaying in the context menu drop down list for the Integration Repository (IR) Export CMS transport for the all SWCVs.
My question is:
1. Do we really need the CMS track to display CMS TRANSPORT in the context menu?
2. As per How to...Use XI with CMS.pdf ; document the context menu should display the
CMS TRANSPORT irrespective of track creation (Section 3.3.1; PAGE:7 once
the following parameters (Integration Rrepositor) are set to true value:
com.sap.aii.ibrep.core.cms.enableClTransport
com.sap.aii.ibrep.core.cms.enableManualSpDefinition
com.sap.aii.ibrep.core.cms.enableTransportWizard
But this is not reflecting in my IR - CMS TRANSPORT context menu for all SWCVs why?. It is displaying only for the SWCV's which are having CMS track data.
thanks
Sreedhar UrupatturuHi,
How to Transport XI Content Using CMS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Go through all those links..
Thanks,
Satya Kumar,
Reward points if it is useful..
Maybe you are looking for
-
Brand New iMac unable to read data DVD or eject it.
Hello all, I'm no good with technology so please bear with me. I just purchased a brand new iMac a couple of weeks ago, and I'm attempting to run a Data DVD that I got for an online university class. When put in to the disc drive, one of two things h
-
Number ranges for Business Partner
Hello experts, Can you please guide how to define different number ranges for differenet different parner functions such Bidder and Employee. Presently when I create a new employee for a Business partner who has newly registered with SRM, they both a
-
Firefox closes right after I click anywhere on the page.
I uninstalled and reinstalled firefox for couple of times to solve out my problem. Earlier it was saying that some .ddl is not a valid image. So, I changed the location of installation. Now its opening but when I click anywhere on the firefox window
-
Change username and password for PGW2200 ..... ????????....................
Dear how i can change username and password for PGW2200? can give the procedures? thanks,
-
Client 000 has status not modifiable
Dear all, after installing ABAP and JAVA stacks I can normally work in both system (NSP, J2E). I created a RFC function module via se37 to use it as a basis for a web service. But when I try to release my web service for SOAP runtime using TA WSCONFI