Track pad not synching

Hi all. New boy here looking for help with my track pad sync. so i am on 10.5.8 and the track pad says got to run 10.6.4 or later, so is that it, i am stuck and no joy? can my intel duo core imac run the latest os? cheers all oh, anyone know and god tutorials for Automator, that thing is driving me crazy..lol

Hi Mr Dean,
Unfortunatley you'll have to upgrade. Your machine is capable of Snow Leopard as long as it meets these general requirements:
General requirements
* Mac computer with an Intel processor
* 1GB of memory
* 5GB of available disk space
* DVD drive for installation
It think you'll like the upgrade, here's a list of what's new and enhanced.
http://www.apple.com/macosx/refinements/enhancements-refinements.html
Regards,
Captfred

Similar Messages

  • HT1899 Installed windows 8 through boot camp ,track pad not working

    I installed windows 8 though boot camp , track pad not working

    The update to boot camp is now available!
    Just installed Windows 8.1 Pro to my MacBook Pro, Retina, Mid 2012, OS X 10.8.5: Memory 16GB 1600MHz DDR3
    After going through the usual process from boot camp, then installed windows and the support drivers... the trackpad rt click did not work. I had to then go download the boot camp again from windows 8 using the url below and ran the set up.exe from the boot camp folder you can download from below. Run it within windows 8.
    http://support.apple.com/kb/dl1638
    Boot Camp Support Software 5.0.5033
    This solved the Trackpad Right Clicking issue (not working) as well as tapping.
    The wireless and network connectivity issues where resolved as well. The Boot camp support software enabled a boot camp control panel available in the windows 8 system tray and from there you can enable the track pad to tap and use the secondary click.

  • MBP keyboard and track pad not working

    Today the keyboard and track pad on our mac book pro laptop just stopped working. The mouse connected to it by usb continued to work but we can't type or anything. We tried the ^F6 keyboard shortcut but it did nothing since of course the keyboard isnt working. And it is also not the number lock key. The computer was working fine all day up until now. It is just under a year old. Any ideas?

    I'm having the same problem. It appeared yesterday and then magically "repaired" itself. My MBP was fine today. Tonight the problem is back. No response from the keyboard and track pad. Track pad works fine using a USB mouse. My problem appears at start up. The cursor is in the usual upper left hand corner. It can't be moved. Restart, sleep then restart do not solve the problem.
    Suggestions?

  • Key board and track pad not working

    Ok, My situation is similar to some of the other things posted but not quite.
    I tried to wake my computer up from sleep the other day and it wouldn't "wake up" so I did a hard shut down and restart. When it restarted the key board and track pad did not work. The caps lock light wouldn't come on or anything. I tried connecting a usb apple keyboard and mouse and those didn't work either.
    When switching to windows in bootcamp, everything works. So... I guess that means it's a software thing.
    I called Apple support and we did all the possible key combinations and restarts possible and it came down to this: I need to archive install tiger again, then install all of the updates, then install leopard back on (I don't have leopard disk because it was a family pack and im at college). My roomate's macbook (White, bought in aug 2008) install disks which are 10.5.2 do not work with my computer.
    My question is: Is this really the correct solution to my problem? Will archiving and installing tiger then leopard affect my files? I haven't backed up using time machine in a month, so is there a way to backup through osx with my keyboard and trackpad not working or can I do a good back up through my windows partition in bootcamp? Any more tips? Thanks, this has never happened before and I guess I'm a little clueless.

    Do you have access to another Mac? If so, possibly you could use Firewire Target Disk Mode to access your drive and do a current Time Machine backup:
    http://support.apple.com/kb/HT1661
    Since you have a family pack of Leopard at home, possibly you could have someone burn a safety copy of it and send it to you so that you can reinstall Leopard. Once you have the OS installed and brought up to date, you could even restore from Time Machine if you had to.
    Since we don't know all the steps you took, it's hard for any of us to say if this is the right solution. Evidently the Apple tech came to the conclusion that your software had become corrupted, and this could well be the case, since everything works on the Windows partition. Hence the suggestion to reinstall the OS.
    I think you need to get a copy of the Leopard disc so that you can bring your OS completely up to date. I'm not sure of the logistics of doing an Archive and Install with both Tiger and Leopard, especially if much of your work has been done on Leopard. I'm not even sure if it's necessary to reinstall Tiger--it might be better to just reinstall Leopard using Archive and Install.
    It's always a good idea to have a good up to date backup like Time Machine before attempting an Archive and Install, because things can go wrong. If they do, you may end up having to do an erase and install. If that happens, you can restore from your Time Machine backup.
    I think what you should do is to get a copy of your Leopard disc, and then boot from it and try to do the Archive and Install. Navigate to Disk Utility first and verify both permissions and the disk and repair if necessary. Then proceed with the Archive and Install. Once you're done, run all the updates. Then go to Disk Utility and repair permissions.
    Good luck!

  • HT1338 track pad not working after upgrade to mountain lion

    I have just finished installing Mountain Lion and it apears to be ok but I have two imediate problems.  Firstly the track pad gestures are not working, I can only select anything with the click switch, single selection by finger is not working.  Secondly I have used the migrate assistant to transfer my files but I appear to have lost all my desktop shortcuts.  I have installed all the upgrades which were advised on start up.  I hope someone can help.

    For the first problem, you need to re-enable 'tap to click' in Sys Prefs:

  • TS1248 Track Pad not working correctly after upgrading to OSX10.8

    I've the same issue since yeterday night after upgrading to OSX10.8 from OSX10.6. The problem I am having is only right side of the track pad is not working.. Did some one already experience this issue ?
    See screen shot
    Cheers,
    Vivek

    In addtion to Altenbach's comments - 
    I'd recommend trying another VI function to get the power spectrum for
    your signal to see if the behavior is the same.  You can find some
    examples of VIs using the power spectrum functions using the NI Example
    Finder.
    You can go to LabVIEW's Example Finder by going to Help >> Find Examples.
    Then search for FFT. There should be some results that include FFT and
    Power Spectrum Units.vi, Power Spectrum Measurement.vi, Basic Spectral Measurements.vi,  and Spectrum Measurements.vi. Try opening and
    running these examples to see if the VIs are returning the proper
    results.
    Mark Walters
    Application Engineer
    National Instruments

  • Tracker Pad Not Working

    My tracker pad has stopped working.  I've changed the batteries twice to no gain.  The indicator light isn't opereating.  Its 18 months old and up until now I've had no problems.  Could anyone advise if this is a common problem, is there a fix or do I need to consign the pad to the bin?  Many thanks

    If you have some Isoprope Alchohol, remove the batts and clean the contacts. You might need to tether a cotton bud (cue tip) to something longer to get at em)...
    If you dont have that, use newprint paper.. Not the smooth BOND paper.. but the newsprint, its slightly abrasive and might do the trick.

  • Track pad not functioning correctly

    My MacBook 5,1 is having issues with the track pad.
    Clicking on a folder to open and scrolling are fine. Even a feather like click works, so sensitivity is still functional.
    Click and drag and what Apples called secondary click to get drop down menus at different locations are both not working. So highlighting text and secondary/right clicking a misspelled work to get suggestions all don't function.
    I have tried different settings in the preferences, without a solution to this.
    I tested using a mouse for click and drag and this works, but I would preferred to use the track pad if possible.
    IS there a way to remove the preferences for the track pad from the system and then reboot or some similar solution to resolve this?
    Thank you.

    The situation is unchanged, if anyone has any idea how to resolve this issue with the track pad it would be most welcome.
    I s there any software fix or something I can do?
    Thank you

  • Track pad not sensitive enough

    My Macbook alum has been working well for the last year or two. Within the last couple months, the track pad has become increasingly less sensitive...clicking on it does not always invoke a selection as intended even when a clear click sound is heard. I find i need to click much harder than standard use to get it to respond.
    I checked the control panel and played around with the settings several times with no improvement.
    Thoughts?
    Thanks in advance!

    I had the same problem, clicking with the track pad became unbearably bad, it wasn't sensitive at all.
    I found that if you take off the bottom and remove the battery on the track pad there is a screw, its a triangle shape.
    Tightening that screw raised the trackpad (slightly, don't over do it) and by tightening that screw the trackpad's clicking came back to normal.
    Free fix, worth a shot. Don't strip the screw though...

  • Track pad not working in Windows 7

    I have a mac book pro running boot camp and windows 7. I am unable to use my track pad to scroll and right-click when using windows. I have looked at other threads and am in need of a step-by-step explanation for how to fix this problem. Has anyone run into this problem? Any help would be much appreciated.

    When you ran Bootcamp Assistant did you download the Windows Support software? Did you then install the Windows Support software from within Windows?
    If not, start Bootcamp Assistant and select the option to download the Windows Support software then follow the instructions in the Bootcamp Installation manual to install the Windows Support software.

  • My track pad not working properly

    Hi Guys
    I have been reading loads of forums on trackpads not working due to updates but I only have 10.7.5.
    My track pad was working fine all day then when I get home to open computer again it starts playing up randomly selecting folders and wont click.
    I restarted my computer checked for udates now I cant click and drag but the cursor and tapping and two three fingers is fine.  Any suggestions. 
    The pad can click all the way to the bottom and if I want to use soming in the top bar I can click on it but nowhere else
    Please help

    Hello Vikas,
    It certainly can be inconvenient and frustrating when your trackpad is acting erratically.  I recommend reviewing the following article for an issue like this:
    Portables and Magic Trackpad: Jumpy or erratic trackpad operation
    http://support.apple.com/kb/ts1449
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Track pad not working & cannot find server message when searching

    I tried rebooting, the track pad has worked on and off for months and now when I try to search anything on the browser it comes up with a unable to find requested server message

    Hi mugssy10,
    Welcome to the BB Community...
    I too was having some issue with my trackpad...atfirst it was not a permanent issue(at times trackpad was working and at times not), but later the trackpad tollay stopped working...i got it replaced by the BB service center...
    So, i wud suggest u to visit a BB service center and get it clarified...do take backup of ur BB before going to a service center coz they will reinstall ur OS too after replacing the trackpad...
    with regards
    simply abhik...
    Please click "Accept as Solution" if your issue has been solved and to give thanks/appreciation, click thumbs up...
    For BB OS update: http://us.blackberry.com/software/smartphones/update.html
    BB Simulators: http://us.blackberry.com/sites/developers/resources/simulators.html

  • Track pad not working, pages unstable, how do I fix this?

    How do I fix my track pad which does not control my mouse?  I plugged in a mouse via USB port but the pages are unstable.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • IMac powers up fine.  Wireless keyboard and tracking pad not recognized. Power lights blink twice, repeatedly. Any ideas?

    My iMac was off during a recent thunderstorm. When I power up the computer all is fine.  However the wireless keyboard and track pad are not recognized by the computer.  Their power lights blink twice, go off, then blink again. Any suggestions?

    Turned out that I had to disconnct the keyboard from the new iMac in order to show in the old iMac.

  • Mac Book Pro Keyboard, Track pad not responding at login page

    URGENT! URGENT! I´m currently in the middle of the amazon shooting a documentary and my Macbook Pro boots up to the login page but I cannot nothing appears on the login line when I type, and my track pad in not responding. Keyboard and track pad dead. However, I can hit the control-apple-power button and get the shutdown-restart-sleep sceen. I plugged in my usb mouse and that works--track pad does not.
    I have rebooted, with power supply, without power supply; removed-replaced battery; still the same problem, boot to login screen--now keyboard, not track pad.
    Any suggestions?

    I also have this problem. After closing my MBP to put it into sleep mode, I opened it a few hours later to resume work and the machine was locked up. I shut the machine down by holding the power key for 5 seconds. Now, every time I try to restart, the login screen appears (after a very long boot time) but the trackpad and keyboard do not respond.
    My summer internship final project is due in 3 days and I am desperate. Please help!

Maybe you are looking for

  • Printing in XML Publisher

    I am curious as to why you can't direct print an XML Publisher Report just like any other Oracle report. If you can print Oracle reports in PDF straight to the printer, why do XML Publisher reports require ps2pdf (note:338990.1)? We are having many i

  • How can i use the same cursor in a loop fro multipletimes.

    I am using two cursors.One to fetch sites and the other to fetch participants under each site.I am performing some job with that participants data.Now the problem is i am using the 2nd cursor in a loop.So it fetches the data of participants falling u

  • Download Option on Dashboard on obiee 11g

    hi, i have a requirement to put a download link option under the report in the dashboard. when we click on the download link it will show a pop to select download type: types are: download to Excel download to powerpoint etc. any ideas! thanks, natar

  • Korean language pack causes problems with Outlook email width

    This has been an ongoing problem for me for some time now and I'm hoping someone can provide a resolution to it. I had to install a Korean language pack in order to read Korean Word documents.  The problem is that after installing this language pack,

  • Has anyone returned an iPod for a gift card

    Hi everyone. Apple was kind enough to return my 3 week old refurbished iPod video so I could get a new one. Now I am iPodless! I was planning on getting a new iPod right away when I got my Gift Card. Seel, I bought the iPod using a gift card. Now the