Training and Event Management (PE) - What does PE stand for?

Hi
Re: Training and Event Management (PE)
Can someone tell me what (PE) stands for?
I have had a look at the documentation on SAP Help but cannot see what this stands for. 
I want to use this in the naming convention in my role stategy but need to understand what this means.
Does anyone know?
Thanks
Charnaine

Hmmm... the plot thickens...
Perhaps if we look into the context where this abbreviation is used, then it would give a hint.
For example:
"training evidence in PE" => Personnel Education
"attendance recorded in PE" => Personnel Events
"will result in PE" => Personnel Execution
According to [PE-RPL|http://help.sap.com/erp2005_ehp_04/helpdata/EN/77/bff8ab4a2911d182b80000e829fbfe/frameset.htm] it is a bit of a mix of the first two.
Cheers,
Julius

Similar Messages

  • Training and Event Management - Invoicing in different Countries

    Hello
    we are on SAP 4.7 110
    we have implemented training and event management in one company now for years and everything is runnig fine. We use also the SD-module to create invoices for the participants.
    We now want to introduce a new training company in another country. This means we need another Country for tax determination in billing. In customizing transaction OOSS I can only assign one default country.
    Does anybody know a way to set additional country settings for different training companies within on SAP client?
    Thanks for your Help
    Rauno

    Hello,
    From what I recall, TEM in ESS can be configured via ITS based service iviews. 
    There are some services like PV3I, PV7I, PV8I etc which you can find out using tcode SICF.
    The portal consultant can then create ITS based iviews for these services. 
    Since you are using EHP5, I think these services are now obselete. Please check further on this.
    As mentioned earlier, you can go for the LSO rather than TEM.
    Best Regards.
    Karan.

  • Appraisal for Training and Event Management

    Hi Friends,
    Hope every one doing well.
    I have a requirement regarding the Appraisal of Attendee and send to its reporting manager for review and Manger may change the rating and completed or reject for re-appraise from the attendee.
    Note: We are not using LSO, using old Training and event management and we don't have any ESS,MSS system simply doing in ECC system only.
    here i need the notification for the reporting manager once the attendee save his ratings, if i do with old appraisal functionality with APPCREATE & APPCHANGE system is not giving any notifications to the reporting manager.
    if i go to new appraisal system that is with PHAP_CATALOG and PHAP_ADMIN i am not able to get the course's what employee attended for the training.
    please can any one share your view how to do this.
    using  BS - Appraisal Model
              BG - Criteria Group
              BK - Criterion
    Thanks in advance,
    Best Regards,
    Praneeth kumar

    Thanks for your suggestions.
    i can't go through new appraisal model with catalog & template, because client is not having ESS,MSS.  appraisal has to done in the ECC only.
    Done the customization like this :
    created scales
    created appraisal model and assign the scales
    for appraisal, Employee can do from APPCREATE transaction rate his own ratings and save.
    Now Appraiser (Manager) from APPCHANGE complete the appraisal.
    now my requirement is (1) after saving the APPCREATE by the employee, notification has to go to his reporting manager only. (2) Manager can do review/change and complete the process to his Employees only (who are reporting to him)
    how can i do this, standard functionality is there or i have to go for ABAP coding ? if ABAP coding what i have to ask them to do.
    Please help in this requirement.
    Thanks and Best Regards,
    Praneeth kumar

  • Location and building in Training and Event Management

    Hello Dear Friends,
    I Have a maybe very simple but confusing question.
    I can not distinguish between "Location" and "Building" in Training and Event Management.Does Location contain buldings?
    what is the relation between these two? and where do they join and link to each other? please give me an example.
    Edited by: AppreciateSAP on Dec 28, 2010 9:54 AM

    HI,
    Location means name of the city/town where the training is conducted,
    Building means, in one city there may be more then one training institute/different building.
    for an Ex.
    Location - Delhi.
    Building-    Where the training is actually conducted. Like building 1 and building 2.

  • Delivery Type Attributes in LSO/Training and Events Management

    We need to create an OJT delivery type for Courses.  It should allow for duration of the training and assignment of instructor, but not require a schedule nor a course content URL.  None of the standard delivery types fit this bill, so I would like to take one of them and modify the attributes, but the IMG does not easily allow this.
    My question is two-part:  1.  Is there a Delivery type that will accommodate the above requirements?  If not, then 2.  How do I modify attributes for a Delivery type to try to customize one that will do what we need it to?
    Thanks in advance for your assistance.
    Roci

    Hi,
    Follow SPRO>Training and Event Management>SAP Learning Solution>Training Management>Course Preparation>Delivery Methods
    Hope this helps.
    Donnie

  • PMS and Training and Event Management

    Hi Gurus,
    Our one the of the client implementing PMS and Training and Event Management.
    Could anyone suggest me what are the questions need to be asked in initial meeting with the client.
    and if anyone has configuration documents on PMS and Training and Event management please forward to me,
    my id would be [email protected]
    Regards,
    Rajesh Soma 

    The prerequisites of PMS is OM and PA is mandatory,
    PMS is just like an interaction between the manager and the employees in an enterprise, based
    On his work they are going to put some rating etc.
      In the standard system employee called as “Appraise” Manager called as an “Appraiser” and Manager’s Manager called as Higher level manager “Part Appraiser “ can be a self-peer & customer they can save & provide their Comments to  the “Appraiser”
    First you take the requirement form client side what are the process and how Appraisal system in client then you have to prepare one sheet like Preparation ,Planning,Process
    for business functions and other check below :-
    HCM, Performance Management (Flexible) 01 - SAP Documentation
    HCM, Performance Management (Predefined) 03 - SAP Documentation
    check below once :-
    Tcodes for PMS Basic Setting
    OOHAP_BASIC      Basic Appraisal Template Settings
    OOHAP_CATEGORY      Appraisal Category Settings
    OOHAP_CAT_GROUP Category Group Settings
    OOHAP_SETTINGS_PA PA: Settings
    OOHAP_VALUE_TYPE Standard Value Lists
    T codes for PMS Process
    PHAP_ADMIN     Administrator - Appraisal Document
    PHAP_CATALOG     Appraisal Template Catalog
    PHAP_CHANGE     Change Appraisal Document
    PHAP_CREATE     Create Appraisal
    PHAP_PREPARE     Prepare Appraisal Documents
    PHAP_SEARCH     Evaluate Appraisal Document
    start your work with above things any other post here again ......

  • Regarding training and event management queries

    hi experts,
    in my company we have ess in which training and event management module is working fine.i need to develop a report in which training booked against employee through tc-psv1 means in sap-r/3 and through ess means tc-pv8i will come.means saggregation for sap r/3 and ess will come.
    please help me regarding this.
    how will i identifie that training has been booked against employees  through sap r/3 or ess on what paramenet we will identifie.
    plz help me....
    is there any function module;....

    solved by own

  • Training Need - TN in Training and Event Management

    Hi
    Did any one worked on Training Need (TN) in Training and event management? I have the below question.
    For France there is a legal requirement to capture some 1.6 % of the employee annual gross salary towards training cost.  So where to record the training cost of the employee in Training and event management and is there any link with payroll. 
    Logically it sounds as it does.  but where and how is it connected with payroll.
    Please revert if you know the solution.
    Brs
    Kenu.

    Hi
    In Table V_T77TNM_DC
    We need to have the below entries
    TNM                                              CL_HRTNM_VALO_COMPUT_GUI_FR
    TNM       HRTNM00_REPMOD        CL_HRTNM_VALO_COMPUT_GUI_FR
    TNM       MP168400                       CL_HRBAS_INFTY_1684_GUI_FR
    TNM       RPCTNM9S_REP            CL_HRTNM_INFTY_1036_GUI_FR
    Regards
    Kenu

  • Training and Event Management booking date

    Hi,
    I am working on Training and Event Management cube 0PE_C01. One of the requirements of a query is to show the booking date of the course.
    I have looked in business content for other cubes i have checked info object and 0event, i have also checked datasource 0HR_PE_1 but I can not find anywhere this information is being extracted into BW.
    Does anyone know how if this info is available or would i have to ammend the datasource to bring this info in.
    Thanks
    Forhad

    any ideas anyone.. or am i left with appending the datasource for booking date

  • Training and Event Management Implementation based on competencies

    Dear Friends,
    My client is going ahead for Training and Event Managment Implementation. They have a basic requirement to start with and that is :
    1) They have done competency mapping for all its employees and they want that the competencies of each employees(along with the skill levels) to be recorded in the system and that has to be the starting point of using Training and Event Management module.
    2) They want, if the competencies can flow based on Job/ Position.
    3) Some identifier to the competencies, whther it has flowed from Appraisal or any other sources in the Final Training Needs.
    Kindly provide me help, as to how I will be able to achieve that and in what Infotypes the data pertaining to Training and Event Managment will be stored.
    If u all can kindly share with me the User Manuals and Configuration Docs of Training and Event Management, it will be of great help.
    Thank you all.

    Hi,
    Competencies can be stored as qualifications in PD and then by activation of PD PA intergration can be seen from pa30 infotype 24.
    Qualifications can be stored against a Job/Position and are called as the Requirements. They are seen as a separate Tab and to which ever position the person is linked to the corresponding qualifications of the position will appear in the requirements tab.
    You can maintain the proficiency and a note along with the qualification when assigned to a person.
    Also Appraisals can have qualifications in the template rather than criteria and criteria groups.
    Also after training is completed during the follow up we can create an appraisal and transfer the qualifications or simply transfer the qualifications to the employee.
    Regards,
    Divya

  • TRAINING AND EVENT MANAGEMENT - ERROR

    Dear SAP Experts,
    I am working on the module TRAINING AND EVENT MANAGEMENT.
    While using transaction PSV2 - DYNAMIC BUSINESS EVENT MENU, when i click on BUSINESS EVENT TYPE in that create W/O RESOURCES, I get an error.
    PLANNING PERIOD IS NOT IN BUSINESS EVENT TYPE INTERVAL.
    Can you please guide me in this.
    Please tell me where i am going wrong
    Thanks in advance.
    Regards
    Aniruddha

    Hi all,
    PLANNING PERIOD IS NOT IN BUSINESS EVENT TYPE INTERVAL (on LSO_PSV2)
    I have the same error ...
    Does anyone know?
    thanks in advance, Sony

  • Training and event management config in ESS

    Hi,
    where we can do the training and event management configaration for ESS.
    we are using EHP5
    Thx
    J

    Hello,
    From what I recall, TEM in ESS can be configured via ITS based service iviews. 
    There are some services like PV3I, PV7I, PV8I etc which you can find out using tcode SICF.
    The portal consultant can then create ITS based iviews for these services. 
    Since you are using EHP5, I think these services are now obselete. Please check further on this.
    As mentioned earlier, you can go for the LSO rather than TEM.
    Best Regards.
    Karan.

  • Training and event management issue

    Hi,
    I have issue in Training and event management. Can employee attend two programs in same day in different location?please let me What is standard process
    Regards,
    Prasath

    Is your question related to allowing the registration for two programs on the same day at different locations? If yes, it will be giving a warning message that your training registration is overlapping with already regestered program. That to only when the time of the programs is same. You need to implement custom checks if you would like to resist from registring for such programs.
    Conceptually, it is always possible for a person to attend two programs in the same day at two locations (here location definition is company dependent and how do you define different locations of your company). So it wont resist from registring or infact if possible from participating as long as the schedule is not collaiding...

  • Training and Event Management Calendar in Portal iView

    Has anyone implemented Training and Event management in the portal and if so, how did you develop the Calendar iView? 
    Did you use WebDynpro, .NET, or some other method?
    Your assistance is appreciated.
    Thanks,
    Donna Maupin

    Hello,
    From what I recall, TEM in ESS can be configured via ITS based service iviews. 
    There are some services like PV3I, PV7I, PV8I etc which you can find out using tcode SICF.
    The portal consultant can then create ITS based iviews for these services. 
    Since you are using EHP5, I think these services are now obselete. Please check further on this.
    As mentioned earlier, you can go for the LSO rather than TEM.
    Best Regards.
    Karan.

  • Migrating Training and Event Management...

    I need to migrate between two systems, both structural content and participants of Training and Event Management and is wondering if anyone can help me as to how to go about doing so? Do there exist standard IDOCs and programs/function module to do so?

    Hi,
    i think you could use message type hrmd_a.
    How to configure ALE
    is described in this docu HR special
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEHR/CABFAAL
    EHR_ALE_QS.pdf
    or in this genral
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
    Hope this helps.
    Regards
    Bernd

Maybe you are looking for