Training & Event Management Course type ** could not be created Message no. LSO033

Dear Gurus;
I'm trying to record a Business Event Group through S_AHR_61011889 - Business Event Group , then a Business Event Type through S_AHR_61011888 - Business Event Type.
Actually when I'm recording the data of the Business Event Type then I save i get a message stating
Course type **** could not be created
Message no. LSO033
to be able to save the event type I have just to record its name and the capacity then after saving I have to select change "F6" and record each data infotype separately, something which is not logical for the users.
Even when they make change and record the remaining Infotypes like the description then they select display what they've recorded doesn't come
Does anyone know how can I fix this?
Thanks in advance.
Best Regards;
Lobna

Dear,
Looks like has issue in authorization access, verify and fix it.
Regards,
TG

Similar Messages

BPM Error:Runtime handle of object type could not be created:CX_MERGE_SPLIT

HI Guys...
I am working on a RFC to HTTP scenario:
It is a standard SAP interface ....so we created only ID objects..obviously the BPM delivered by must be correct.
in sxmb_moni_bpe it is throwing th following error texts:
Runtime handle of object type could not be created
Error executing service for node
Exception CX_MERGE_SPLIT occured
component mapping has returned an error
unmodeled exception when executing service for node
No payload found
object FLOWITEM method EXECUTE cannot be executed
I tested the mapping payload from sxmb_moni in IR and it is working fine.
Receiver is an HTTP so could not able to find exactly whats happening as no thrid party tools can be installed....struck up here.
Any iputs will be of help in this area.
Thanx in adavance.
Kiran

any inputs around this plz??

IDoc Error -Instance of object type could not be changed

Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
Please suggest on this
Thanks
Ajit

Hi Madhu
All these POs are uploaded during the Cutover Activities only, I am not sure whether it is uploaded through LSMW or not. What I guess is If its uploaded thrugh LSMW , then we can't change any value in the PO.
Please sugest how can I process allthese IDocs.
Thanks
Ajit

IDoc failed with the error massaeg "Instance of object type could not be ch

Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
All POs are get uploaded in SAP during Cut over activities only.
Please suggest on this.It will be a great help.
Thanks
Ajit

Hi
After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
Please help
Thanks
Ajit

As a end user how to work in a " Training & Event Management Module'"

Dear Gurus,
As a end user how to work in a " Training & Event Management Module'"
Please advised
Regards
MHPO

Dear MHP,
there are lots of things you can do as an end user in TEM. You could create new events (not events types), book peoples, fix the date of the event, then create califications of the event (about the event or about the atendee). Please, read sap help issues: (in Training and Event Management) day-to-day activities, Recurring Activities and Reporting.
I hope this help you.
Santiago

Attendance Requested Status in Training & Event Management

Hi Friends,
In Training & Event Management, the User goes to the u201CTraining Centeru201D in ESS to submit his nomination for a Business Event to the Immediate Superior. (Path : ESS, Training Center, Booking Offer, Add to Basket, To Basket, Proceed to Request, Request Attendance).
Now for that User, the Status comes as u201CAttendance Requestedu201D for that Business Event & a Workflow is triggered to his Immediate Superior for Approval.
When the User refreshes the screen or logs in the ESS again the Status u201CAttendance Requestedu201D for that Business Event vanishes although the Immediate Superior has not approved his Attendance Request.
It is desired that the Status u201CAttendance Requestedu201D should be displayed in the Users u201CMy Bookingsu201D till the Immediate Superior approves it.
Also it is desired to have a report of how many such u201CAttendance Requestedu201D nominations are pending for a specific Business Event.
Pls advise.
Warm Regards,
Abhijeet

1. define factory calendar in the tcode SCAL and the same thing you have to assign in the img-training and event management-business event preparation-location-create location- there you have to assign factory calendar.
2. if you want training schedule you have to go img-training and event management-business event preparation-define time schedule if you enteer into that you should in the first coloumn any number for ex 01 3 day schedule and you have to select this and click on day segment in day segment give normal again select normal and click day schedule there you should give start and end times of the schedules for morning,afternoon and evening and this time schedule you will assign to the business event type which comes under business event preparation
also see:
S_AHR_61011887 - Master Data Catalog
check the tcode OOET OOEG----to create business groups and business events

Training & Event management and Appraisal

Hi,
Can anyone tell us that Training & Event management and Appraisal are available standard ESS package?
Thanks,
Anumit

Yes, Training & Event management and Appraisal are available in ITS based ESS business package.
But latest ESS business package(webdynpro based) do not have training and event management. You may need to deploy Learning solution. Full functionality of Appraisal is available with ehp4 of ESS BP.

A webpart or web form control on this page cannot be displayed or imported.The type could not be found or it is not registered as safe.

Hi,
After moving my files from SP 2010 to SP 2013 , for all my web parts i am getting A webpart or web form control on this page cannot be displayed or imported.The type could not be found or it is not registered as safe. error. I checked web.config files
and they are there as safe control and trust level is also full.
These webparts work in 2010.
Do i need to tweak something in code or distributed cache to make this thing work? The errors i see are
Error importing WebPart. Assembly c , Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29, TypeName. C. A Web Part or Web Form Control on this Page cannot be displayed or imported. The type c Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29
could not be found or it is not registered as safe.
Getting Error Message for Exception Microsoft.SharePoint.ApplicationRuntime.SafeControls+UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type C Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29
could not be found or it is not registered as safe.
at Microsoft.SharePoint.WebPartPages.WebPartImporter.CreateWebPart(Boolean clearConnections)
at Microsoft.SharePoint.WebPartPages.WebPartImporter.Import(SPWebPartManager manager, XmlReader reader, Boolean clearConnections, Uri webPartPageUri, SPWeb spWeb)
at Microsoft.SharePoint.WebPartPages.WebPartGalleryItemBase.InstantiateFromXml(XmlReader reader)
at Microsoft.SharePoint.WebPartPages.WebPartAdder.SiteWebPartGalleryProvider.SiteWebPartGalleryItem.Instantiate()
at Microsoft.SharePoint.WebPartPages.WebPartGallerySourceBase.AddItemToPage(WebPartZoneBase zone, Int32 zoneIndex, WebPartGalleryItem item, String wpid)
at Microsoft.SharePoint.WebPartPages.WebPartAdder.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
An error occurred while attempting to add the gallery item [Custom] c to the page. The error was: Microsoft.SharePoint.ApplicationRuntime.SafeControls+UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The
type c Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29 could not be found or it is not registered as safe.
at Microsoft.SharePoint.WebPartPages.WebPartImporter.CreateWebPart(Boolean clearConnections)
at Microsoft.SharePoint.WebPartPages.WebPartImporter.Import(SPWebPartManager manager, XmlReader reader, Boolean clearConnections, Uri webPartPageUri, SPWeb spWeb)
at Microsoft.SharePoint.WebPartPages.WebPartGalleryItemBase.InstantiateFromXml(XmlReader reader)
at Microsoft.SharePoint.WebPartPages.WebPartAdder.SiteWebPartGalleryProvider.SiteWebPartGalleryItem.Instantiate()
at Microsoft.SharePoint.WebPartPages.WebPartGallerySourceBase.AddItemToPage(WebPartZoneBase zone, Int32 zoneIndex, WebPartGalleryItem item, String wpid)
Adit

Hi Adit,
According to your description, my understanding is that the error occurred when you deployed the .wsp files to SharePoint 2013.
I recommend to check if all the assemblies are put into the BIN and GAC.
If above cannot work, you can check the troubleshooting steps in the link below:
http://www.bluedoglimited.com/SharePointThoughts/Lists/Posts/Post.aspx?ID=189
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Training & Events Management

Hi all,
We have implemented Training & Events Management & ESS. The employees can book their attendance through ESS. Now the user wants that the Training Calender should be viewable according to Employee subgroup.
Eg : Employee A belongs to Top Management employee group then he should be able to view all training programme and if Employee B belongs to General staff employee then he should be able to view only training programmes related to him.
Where can we configre this in T & E Mgt. that this Training programme is valid for this Employee subgroup.
Thanks & Regards,
SB

Hi,
In the ESS, all the Employees in the Organisation are able to view all the list of Training Programs that are going to occur.In standard SAP there is no provision in SPRO to restrict the user to view the Training programs based on ESG.
The display of the Training Programs in ESS as per ESG cannot be controlled.
However we can restrict the Booking & Pre-booking of the Business Event & Business Event Types by making custom tables specifying which ESG are eligible for which Business Event & Business Event Types.
These Custom Tables will be referred before the execution of Booking/Pre-booking Badii.
Warm regards,
Abhijeet

Training & Event Management in ESS

Till date whichever document I have read regarding ESS, it says that "Training & Event Management" is part of it. Today when I am implementing ESS for my client, I see that ESS is having all the functionalities e.g. Leave request, Who's who, Life and work, Benefit & payment, Travel etc., but not TEM anywhere.
My client needs Training related functionalities in ESS.
Can anyone help regarding how do I add TEM in ESS?

If you are on ECC 5.0/6.0, then you still use the ITS based services PV7i and PV8i.....which are older ones.
Tie up these services in homepage framework page and use it.
Else, try to explore the LSO component available with your ECC 5.0/6.0. Check System component versions (System -> Statuses -> available components).
Available service is based on BSP technology which is nothing a pre-packaged application (HCM_LEARNING). You can see this from your object browser - se80.
HCM_LEARNING is far better service with more avanced features.
Hope this helps !!!
Regards,
Anil Kumar

Training & Event Management - Billing - One Time customer

Hi All,
Would anybody be able to help us with the below scenarios, Thanks in advance for the help.
1. How do, I do Billing in Training & event management?
2. Can we have more than 1 one time customer for different departments in training & event management. if yes, what would be the process?
3. Integration table _T77S0,_ have only 1 one time customer as integration between training & event management and sales & distribution, but if we assign different one time customer at Attendee level, there is a confilict, how we can assing different one time customer for different attendees( say department wise)?
Thanking you.

Hi,
One time customer itself means that there is no regular transactions with this customer, so that is why a generic account is created for such customer and the transaction for various one time customers posted with such generic account.
The credit check is not relevant to the one time customer.
Regards,
Gaurav

IDoc type could not be determined for the IDoc

I am trying to Post the payment run through the transaction F110.
In the payment run log i get the following message:
"IDoc type could not be determined for the IDoc"
But in fact the IDoc is generated and it is displayed in We05.
I have configured the Message type PAYEXT-PEXR2002 and EUPEXR-IDCREF01 both for the partner.
Has anybody Idea about why this error is coming and how i can resolve this?
This is important because in Payment run log, they need to know the IDoc number generated for that run, else it may become difficult for user to identify which IDoc was created for a particular payment run.
Would appreciate if anyone can please help on the same.
Thanks & Regards,
Narayanan

Hi,
If you are paying the payment through F110, if the payment exceeds the limit what you are spefied in available amounts in FI12 screen. First Please check this screen.
still if you are having any problem
Check in the below path:
IMG- Financial Accounting (New) - Accounts Receivable and Accounts Payable - Business Transactions - Release for Payment - 1. Create Workflow Variant for Release for Payment
2. Assign Release Approval Procedure for Release for Payment
3. Define Users with Authorization to Payment Release
Thanks
Chandra

IDoc type could not be determined for the IDoc in F110

Dear All,
The below mentioned error is encountered by us in F110.We have check all the setiing and not able to find the solution for this error.
Now our heads has gone for a toss....can anyone kindly suggest what and where we have missed out.
The system is not creating the IDOC file.....
IDoc type could not be determined for the IDoc
Message no. B1090
Diagnosis
The IDoc passed to the ALE layer could not be processed. The specifications passed in the control record were not correct.
The basic IDoc type (field EDIDC-IDOCTP on the outbound side or EDI_DC-IDOCTYP on the inbound side)has not been specified for this IDoc.
The attempt to read the basic IDoc type from table EDIDO also failed. No table entry was found for IDoc type from field DOCTYP.
Procedure
Possible error sources:
- The calling program did not provide values for the fields specified above correctly. Make a note of the transaction in which this error occurred and consult your ALE administrator.
- The IDoc type is not known in your system and must be maintained.
Kindly do the needful.
Regards

If you want to create IDocs from the proposal run, outbound parameters (we20) with the 'Test' flag are required in addition.
see OSS note 504230 : Message EUPEXR forms the logical unit around the individual payment messages (PAYEXT IDocs). The E1IDRD1 segments contain the IDoc numbers of the payment messages in field DOCNUM. Segment E1IDRS1 contains check sums (total of all amounts, account numbers, bank numbers, number of payment messages). This information is provided for the EDI subsystem. Set up EUPEXR In Transaction WE20 for the partner profile for the house bank, create the outbound parameters for message type EUPEXR with IDoc type IDCREF01. If you want to create IDocs from the proposal run, outbound parameters with the 'Test' flag are required in addition.

Error: Object type '' could not be generated when creating sales order

Hello Friends,
I am using a SAP standard ITS service to create sales order.
When I am creatin SO, it gives me error Object type '' could not be generated.
Can you plz suggest me what is that issue & how I can reslove it.
Regards,
Narendra

any inputs around this plz??

Error: "Transaction type could not be determined" during PO Creation fromSC

Hi all,
I'm working on SRM 5.5 with ECS.
During the creation of a PO I want to add a SC as an item of PO.
But when I chose the SC and click on the button Add to PO I recive the error:
Transaction type could not be determined
In the organizational unit I set the attribute BSA and DP_PROCT_TY.
there are other steps I have to do to join the transaction type of SC and PO?
rgs
enzo

Hi Enzo,
First check if the attribute BSA and DP_PROC_TY have the same value.
Then in the attribute value for BSA, change the source system for the document type to your SRM system.
Create a new PO and a shopping cart.
Try changing the PO by adding the shopping cart
Hopefully your problem may get resolved.
Thanks
Sanjeev

Training & Event Management Course type ** could not be created Message no. LSO033

Similar Messages

Maybe you are looking for