Transaction cade to create Gereral text
transaction cade to create Gereral text
Are you talking about the text modules of SMART Forms are the texts that you generally see in the Documents.
SO10 is transaction where you can create texts.
Text Modules - SMARTFORMS.
REgards,
Ravi
Note : Please reward points if this helps you.
Similar Messages
-
Transaction code to create a text module and import graphics
Hello everybody
Can anybody tell me the transaction codes used to create text module and import graphicsHi,
use rstxldmc or se78 for graphics uploading and SO10
Reward points if found helpful....
Cheers,
Chandra Sekhar. -
Create a text field in transaction code VF11
Hi,
How to configure a text field in transaction code VF11.Please help me on this.
Presently we are just cancelling the invoices through VF11. but no inputing the reason for cancellation.
We need to have a mandatory field, were in we need to input the reason for cancellation of that invoices.
Thanks & Regards,
vcsreddy.Dear
Create One text type for Billing document header and Assign the Biling Type S1
and when your doing Vf11Transcation select GOTO Billing Document Over view and select the line item
go to text there your text type will determine.
Do this I hope your requriment full fill
Regards
Supriya -
How to create new text type in PLMD_AUDIT
Hi All,
I need to create new text fields in addition to the existing Text types in Audit Management screen for all the audit components in the TEXT TAB in transaction PLMD_AUDIT.
guide me.
With Regards,
San RaoHi san. rao
If you need to create that, you need to go ABAP development. In sap Audit management is not a sophasticated tool for all kind of audits. In the Audit component only you will find the extra text type Audit location. other than that you will find description and note.
thanks ®ards.,
kamal -
Create long text for network activity
Hello,
I'll create a long text for a network activity, but I found no BAPI for that.
When I create long text for an order activity I use the BAPI BAPI_ALM_ORDER_MAINTAIN. There it is possible to specifiy the long text lines.
In the BAPI BAPI_NETWORK_MAINTAIN there ist no table for specifying long text.
Did anyone know how to create a long text for an network activity?Hello Vivek,
I'll tried this too. My problem was, if I add long text to a existing network activity, everything works well. But in my programm I create a new network plan with one network activity (0010). After commit I become the correct network plan number. Then I try to add long text to the network activity. I get correct return codes but if I look in the transcation CJ20N I could not see some text. If I use the READ_TEXT function with the key I insert the text, I see the text, but not with the transaction CJ20N.
I compared the key I used in my program with the key if I insert text with transaction CJ20N. I could'nt found some differences.
SELECT SINGLE afvcp~mandt afvcp~aufpl afvcp~aplzl
INTO (mandant,aufpl,aplzl)
FROM afvcp INNER JOIN
afko ON
afko~mandt = afvcp~mandt
AND afko~aufpl = afvcp~aufpl
AND afko~aufnr = ordernumbernew.
"*Create Identifier
CONCATENATE
mandant aufpl aplzl
INTO lv_name.
header-tdobject = 'AUFK'.
header-tdname = lv_name.
header-tdspras = sy-langu.
header-tdform = 'SYSTEM'.
header-tdid = 'AVOT'.
header-mandt = sy-mandt.
header-TDLINESIZE = '079'.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
client = sy-mandt
header = header
insert = 'X'
savemode_direct = 'X'
owner_specified = ' '
local_cat = ' '
IMPORTING
function = func
newheader = newheader
TABLES
lines = lines
EXCEPTIONS
id = 1
language = 2
name = 3
object = 4
OTHERS = 5.
CALL FUNCTION 'COMMIT_TEXT'
EXPORTING
OBJECT = header-tdobject
SAVEMODE_DIRECT = 'X'
IMPORTING
COMMIT_COUNT = commit_count
COMMIT WORK AND WAIT.
For example in the debug the header ist filled with:
1 TDOBJECT C 10 AUFK
2 TDNAME C 70 210000044156300000001
3 TDID C 4 AVOT
4 TDSPRAS C 1 D
5 TDTITLE C 50
6 TDFORM C 16 SYSTEM
7 TDSTYLE C 8
8 TDVERSION N 5 00000
9 TDFUSER C 12
10 TDFRELES C 4
11 TDFDATE D 8 00000000
12 TDFTIME T 6 000000
13 TDLUSER C 12
14 TDLRELES C 4
15 TDLDATE D 8 00000000
16 TDLTIME T 6 000000
17 TDLINESIZE N 3 079
18 TDTXTLINES N 5 00000
19 TDHYPHENAT C 1
20 TDOSPRAS C 1
21 TDTRANSTAT N 1 0
22 TDMACODE1 C 16
23 TDMACODE2 C 16
24 TDREFOBJ C 10
25 TDREFNAME C 70
26 TDREFID C 4 4
In CJ20N the header is filled with
1 TDOBJECT C 10 AUFK
2 TDNAME C 70 210000044156300000001
3 TDID C 4 AVOT
4 TDSPRAS C 1 D
5 TDTITLE C 50
6 TDFORM C 16 SYSTEM
7 TDSTYLE C 8
8 TDVERSION N 5 00000
9 TDFUSER C 12
10 TDFRELES C 4
11 TDFDATE D 8 00000000
12 TDFTIME T 6 000000
13 TDLUSER C 12
14 TDLRELES C 4
15 TDLDATE D 8 00000000
16 TDLTIME T 6 000000
17 TDLINESIZE N 3 079
18 TDTXTLINES N 5 00007
19 TDHYPHENAT C 1
20 TDOSPRAS C 1
21 TDTRANSTAT N 1 0
22 TDMACODE1 C 16
23 TDMACODE2 C 16
24 TDREFOBJ C 10
25 TDREFNAME C 70
26 TDREFID C 4 -
ALE, IDOC - need to send IDOC and create a text file
Hi,
i need to send idoc to some other system and create a text file in that.
I want sent data to Channel Cluster.
what are the settings required for that in transactions
BD54
SCC4
SM59 - which connection is required
WE21 - which type of port
WE20 - which partner
BD64
Is there any other function modules required.
which function module is suitable like MASTER_IDOC_DISTRIBUTE.Hi,
SM59 - Use TCP/IP Connection with connection type 'T'
WE20 - Partner Name can be logical system name, if it is a vendor/customer you can configure it under the respective names.
Thanks
Krithika -
What is the tcode to created standard text to include in sap script
HI
what is the tcode to created standard text
i want to include standary text in sap script
regads
AroraHi ,
If you want to upload a logo , then u can use program RSTXLDMC if it is in .TIFF format or if you want to upload a grphic which is in .bmp then u can use SE78 or directly u can use SO10 also.
SAPScript Transaction codes
SE71 - Form painter
SE72 - Style maintenance
SE78 - SapScript Graphics Management
SO10 - Create standard text module
Reading Text in SAPScripts
If you only need to output the text, you don't need to used READ_TEXT like in an ABAP program,
just use the INCLUDE command in SAPScript.
It will read the text and output it to your form.
The Syntax is like this:
/: INCLUDE &T166K-TXNAM& OBJECT &T166K-TDOBJECT& ID &T166K-TDID& LANGUAGE &EKKO-SPRAS&
Check the following link:
http://sap-img.com/sapscripts.htm
Regards,
Raghav -
Need help on transaction code to create
1)How to create a transaction code with input parameter?
2) I have a selection screen with the input parameter VKORG.
If I entered a value in vkorg, that related values only updated in custom table thru that transaction.Hi,
First Create the program in SE38 (Report program /Module pool program)
Steps to create the t-code for Report program.
T-code for report program
1. Go to se93
2. give the meaning full t-code name
3. Click on Create button (popup will appear)
4.Give the meaning full short text
5.Select the second radio button and press enter
(Program and selection Screen)
6. U will get a new screen , here u give ur report program name
7. save, check and execute
T-code for module pool program
1. Go to se93
2. give the meaning full t-code name
3. Click on Create button (popup will appear)
4.Give the meaning full short text
5.Select the first radio radio button and press enter
(program and screen)
6. U will get a new screen , here u give ur report program name
7. save, check and execute
Hope this will solve ur problem
Regard
Anees -
Trying to create a text that is on fire or more like a hot branding iron
Trying to create a text that is on fire or more like a hot branding iron
Something like this?
That was from a project I did a few months ago. Sounds similar to what you want. I did that in After Effects.
Basically all I did was add a glow effect to the text and messed around with the glow parameters. The black smoke is animated and moves on the actual video and is basically some pre keyed smoke footage that I had. The smoke was originally gray but black looked cooler.
I'd say it's pretty close to your hot branding iron thing. -
How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word in the document. I am teacher. So for example when a student came to word he/she did not know, if he/she hovered the cursor over the word, a defintion or other information would appear. You can do this in Word using bookmarks/hyperlinks but I can't figure this out in Pages. I can link it to another point in my Pages document but I just need the text to pop up - not take the reader to another location. THANK YOU!!!!!!
Have you tried Word for Mac?
You will need to test if links survive export or printing to .pdf
Peter -
How to create a text tag that shows up in a file but not on the sceen.
I need some help, I'm a newbie with enough skill to be dangerous. If someone can point me in the right direction has to how to use the F keys to apply the tagging mentioned below and the direction of how to do the tagging and make the tag invisible
in a text editor but not the text file. That would be great. If you wish to show some code examples that's OK, but if not I can stumble through and learn while doing it from your directions on how to get it done.
I will start with an example of what I'm trying to do; using the old desktop pub program Ventura. They had (what I'm calling a tag) tags in from of ASCII text in a file to tell the program what it was and what to do with it, I. E.; "Title@this
is the title text" the next line could be "Body@this is body text". When loaded the "Title@" would not be there on the screen.
I'm trying to create some text that uses a similar concept but not for formatting of text like Ventura.
I want to be able to highlight some text in an editor and then have it place some sort of tag for the highlighted text so that I could use it to do something upon that text and only that text; in concept the text "Bob Brush was a painter." I would
highlight Bob Brush and somehow assign a tag that would be "name" and then highlight "painter" and be tagged with "job".
The text file would then have something in it to distinguish "Bob Brush" and "painter" as what each is name and job. (as a note I'm not trying to make a database or form just using this simplified concept to get my idea across
because I get to wordy).
Thanks in advance BK
blkHi bik,
>> how to use the F keys to apply the tagging mentioned below and the direction of how to do the tagging and make the tag invisible in a text editor but not the text file.
It is unclear to me. Like you mentioned F keys, how does it work for? And Could you show us some code with a simple sample or a capture? It could be better to help us understand more.
In addition, I found a related thread
Tag editing in a WPF TextBox. Not sure if it is useful for you. Thanks.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
HOw to create a text file in the given path and delete it after the use?
Hi all,
I am trying to create a text file at the given path and delete the created file after the use.
I am using following code.:
import java.io.*;
// write binary data as characters
public class RanIO {
public static void main(String f[])
// First illustrate append
String lineSep = "\n";
try {
File temp= new File("C:/Ash","cute.txt");
boolean ch=temp.createNewFile();
if(ch)
System.out.println("file created");
else
System.out.println("file Not created");
//writing to file
/* PrintWriter p = new PrintWriter(new BufferedWriter(new FileWriter("cute.txt",true)));
p.print("Emp NO");
p.close();*/
// Open fileWriter in append mode
FileWriter fos = new FileWriter(temp, true);
BufferedWriter bw = new BufferedWriter(fos);
PrintWriter pw = new PrintWriter(fos);
double d=550;
// lineSep = System.getProperty("line.separator");
pw.print("Hello");
//pw.print( lineSep );
pw.print( d );
pw.close();
boolean det=temp.delete();
if(det)
System.out.println("File deleted");
else
System.out.println("File not deleted");
} catch (IOException ioe)
System.out.println( "Append IO error:" + ioe );
My problem:
1)
I am not able to write to the file. I want to know, where i am going wrong.
It is giving error message like
"Canot resolve Symbol: temp,"
But, FileWriter Constructor should accept a File type parameter.
here temp is a file parameter.
If i am not using file=new file();
i can't delete the file after the use. i.e if i use
PrintWriter p = new PrintWriter(new BufferedWriter(new FileWriter("cute.txt",true)));
how can i delete cute.txt after the use?
2)
I am not able to write to the text file. file is created but, a blank file.
"Hello" is not written into the text file.
can anyone help me in this regard
Thanks in advance
AshviniThank you Ram,
But, i want to create a text file in Append mode.
for that i used
FileWriter fos = new FileWriter(temp,true); But, it is not accepting FileWriter constructor in
this format. if i use
FileWriter fos = new
FileWriter("c:/ash/cute.txt",true); it works fine. !!!!!Here's the javadoc
public FileWriter(File file,
boolean append)
throws IOExceptionConstructs a FileWriter object given a File object. If the second argument is true, then bytes will be written to the end of the file rather than the beginning.
Parameters:
file - a File object to write to
append - if true, then bytes will be written to the end of the file rather than the beginning
Throws:
IOException - if the file exists but is a directory rather than a regular file, does not exist but cannot be created, or cannot be opened for any other reason
Since:
1.4
Are you using jdk.13 or lower ?
>
ONe more doubt, Does flush method deletes a file?
if not, then i need to use
File temp=new File("c:/ash/cute.txt");
FileWriter fos = new FileWriter(temp,true); //which
is again a problem
if(temp.delete())
out.println("File is deleted");
}I don't know whether i am taking it wrong ! or
anything wrong with my coding ! but, after creating
and writing data into a text file. I must delete it
as it contains confidential informations.
Regards,
Thanks.'flush' writes to a file immediately. Else you should explicitly call 'flush' to write contents from buffer to underlying source.
javadoc again
PrintWriter
public PrintWriter(Writer out,
boolean autoFlush)Create a new PrintWriter.
Parameters:
out - A character-output stream
autoFlush - A boolean; if true, the println, printf, or format methods will flush the output buffer
cheers,
ram.
Question; What do you gain by opening a file, writing to it and deleting it in the same program ? -
How to create a text object at runtime?
Hi,
I am using crystal reports for visual studio 2010 and using c# to programming.
I need to create a text object in a specific section like section 2. and also I need to control the text object's position and text.
I tried to move a object like:
reportDocument1.ReportDefinition.Sections[j].ReportObjects<i>.Left = 0x8760;
but object's position doesn't change at all.
How can I do these (create a text object and change a object postion)?
ThanksHi Don,
Thank you.
I have downloaded a RAS ( report application Server ) sample.
The sample uses the Business Objects Enterprise XI release 2. I am using win 7 and crystal reports for vs2010. Can I use this version of crystal reports to create a text object at runtime? If not, what is the lowest version I have to purchase to achieve what I want?
Basicly I need following capabilities at runtime:
1) craete text objects, line objects, image objects.
2) change text object, line object and image object positions, sizes, values of text object. If can I like to be able to change font as well.
3) supress objects, sections.
4) change section's height -
I would like to create a text field associated and linked to each photo in my iPhoto library so that I can more quickly retrieve photos. I would also like to have a field that describes what was taken for each photo that that information might be printed when printing a photo.
You can do what you want by printing the photos on a contact sheet. Add the keywords to the photos anb the description to the Description field in the Info tray at the right. Select the Contact list as the layout to print, select the no. of columns and, under settings, select Keywords and Description.
OT -
Is there a way to create standard text messages that can be reused easily
is there a way to create standard text messages that can be reused easily
if you meant phrases, then Yes
Setteings> general>keyboard> add new shortcut
Maybe you are looking for
-
Macbook Pro into Bluetooth Keyboard?
I know the hardware is all there, how do I turn my macbook pro into a keyboard for my blackberry?
-
It seems Firefox keeps running after I close it. When I try to open browser, message says it is running and tells me to close it. I check Task Manager and it does NOT indicate Firefox is running. Unable to open Firefox at all. Have to shut down entir
-
how can i format my macbook 10.5.8 to snow leopord i am doing first time format how its process and do i need to formet or upgrade and i have a snow leopard DVD???
-
How much time should the installation take?
It has been an hour and its still 50%.
-
Why does the Apple logo come up during the Visualizer?
You know how trippy the Visualizer can be? Well, it's bloody annoying to have the Apple logo reappear every few minutes. This didn't happen with older versions of iTunes. Can the logo be prevented from appearing? What's the point when I know I'm usin