Transaction code for Creation of Material

Hi Code Guru's,
can any one please tell me the Transaction code for creation of material.
regards,
Syed Khutubuddin.
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:45 PM

Hi syed,
Goto T.code MM01 then create Material name,
MM02 is change Material name,
MM03 is display Material name.
<REMOVED BY MODERATOR>
Cheers,
S.Suresh.
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:46 PM

Similar Messages

Transaction code for creation of transaction keys in obyc

Dear Experts,
Can u tell me what is the transaction code for creation of transaction keys in obyc asap.
Thanks & Regards,
Radhika.

Hi
There is no TCode and the path is
SPRO-Material Management-Purchasing-Conditions-Price Determination....
Cheers
Srinivas

Transaction code for creation of a specific customizing table ?

Hi,
What's the transaction code for creation of a specific customizing table ?
Thanks in advance.

Carl,
if you can share with us from which t-code you achieve this , than it would be better for we guys.
Amit.

Table for transaction code for creation of process order

Hi Gurus,
Please tell me, in which table i can see the transaction code used to create process order.
regards
Kaisar

Hi,
Table for transactions is TSTC.
If your looking for t-code for process order - COR1.
Regards,
Vivek

Transaction code for creation of CO version

Hi All,
Can anyone please let me know whats the t-code for creating co versions for a project.
SAM

Hi Sampath,
CN72 is to create project version.
you can create more no of project versions for every project. But CO Version is created one time only as per the business requirement to plan cost/revenue/overheads etc....Based on the available CO Version you can use to plan for all your projects.
If you want to copy planned cost from one CO version to another CO Version, use CJ9BS,CJ9CS,CJ9FS.
Hope this clears you. Please go through the below mentioned link for better understanding of CO Version.
http://help.sap.com/saphelp_47x200/helpdata/en/d8/1fe8344d1d166be10000009b38f83b/frameset.htm
regards,
Hari
Edited by: Hari Krishna Kudaravalli on Jun 12, 2009 8:04 PM

Transaction code for Define Basic material

Can any one give the Trannsaction code for the path
SPROLogistics generalMaterial masterSettings for key fieldsDefine basic material

Hi,
OMT6
Regards,
Biju K

Transaction code for creation of Complaint and RMA?

Hi,
In the tcode crmd_order i've a complaint and return creation option is this the one to create complaint and return material authorization.
pl also tell me how do you create a repair order and a service order.
Pl I need transactions. I understand the configuration as I have the best prasctice bu I do not know the creation of RMA / Complaints/Repair order /service order ..that is the trnasactions required for service.
For sales and marketing I know ..I am looking for service module in CRM
can any one please help me out as it is a very urgent requirement.
Thank you,

Hi Polite,
The transaction CRMD_ORDER is the superset for all the transactions mentioned by you. So it is better to remember just one transaction instead of remembring the subsets . Once you use the transaction CRMD_ORDER and then Follow the menu Business transaction -> Create (F5) you will get the list of transactions you can create this is nothing but the the transactions you have mentioned.
If you know the transaction no. you can directly open that in transaction CRMD_ORDER. The other opetion is to use the SAP Menu instead of transactions.
Reward points if it helps!!
Best regards,
Vikash.

How to create package name what is the transaction code for creation

Hi,
I want to create the package and also put that package in my program, how to put the package already saved program.

Hello Rajyalakshmi
You do not put a package to or into a program but ASSIGN a report to a package. To reassign a report to a new package (e.g. from $TMP to z-package) call transaction SE80 and right-click on the report name in the tree display. Choose the following function in the context menu:
Other Functions -> Change Package Assignment
Regards
Uwe

Transaction code for mass creation of physical Inventory document

what is the transaction code for mass creation of physical Inventory document.

MI31 is the transaction to create hundreds of physical inventory documents for annual inventory at a time.
MICN can create several documents at a time for cycle count.
Just look in the menu of phyiscal inventory into the knot Sessions, there are even more e.g. for counting of own stock a customer and vendor location, for vendor stock at own location etc.

Need all transaction codes for idocs

need all transaction codes for idocs

Hi,
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
BAPI tcode --- BAPI.
Also:
IDOC:
IDOC ADMINISTRATION
WE09 / WE02 IDoc lists according to content. View IDocs via specific IDoc number or business application detail contained within the contents of a segment.
WE05 View IDocs
WE60 IDoc type documentation tool
WE20 Partner profile configuration. Add partner detail together with inbound and outbound relationships. We also incorporate message control on the outbound IDocs. Utilize the organizational units to trap functional errors for further processing.
BD87 Reprocess IDocs in error or waiting for action. (Both inbound and outbound in 4.6. Use BD88 in prior versions)
1.4 IDOC DEVELOPMENT
BD55 Conversion rule user exit. Link conversion rule user exit to the different system \ partner combinations.
WE19 EDI test tool. Use to test inbound Function module changes.
WE31 Segment create
WE30 Create IDoc extension type
WE82 Link Release detail to Extension IDoc Type
WE57 Assign function module to logical message and IDoc type
BAPI: BAPI, SWO1.
Transaction codes Related for IDOC Configurations
WEDI: Area Menu for IDOCs
WE02: Display IDoc
WE19: ALE Test tool
WE30: Development of IDOC Type
WE31: Development of IDOC Segment
WE41: Process Codes, Outbound
WE42: Process Codes, Inbound
WE47: Status Maintenance
WE81: Logical Message Types
WE57: Assignment Messages for Appl. Objs
SM59: RFC Destinations (Display/Maintain)
SALE: Display ALE Customizing
BD54: Maintaining Logical Systems
BD67: Maintain methods (inbound)
BD64: Maintenance of Distribution Model
BD87: Status Monitor for ALE Messages
Reward points if found helpful...
Cheers,
Chandra Sekhar.

Transaction code for Open sales order other than VA05

Hi all,
Can any one tell me what is transaction code for open sales order other than VA05.
Please help me .
Thanks & Regards ,
Srikanth P.

Hi Srikanth,
You can try below options.
1- VA05N - This can be run for multiple sold to party & multiple material, etc which was not in VA05. But this doesn't have all columns in VA05 report.
2 - You can check the sales order tables from transaction SE11 or SE16N
Try with below tables for your requirement.
Sales order Header data - VBAK
Sales order Item data - VBAP
Schedule Line Data - VBEP
Business data - VBKD
Status header - VBUK
Status items - VBUP
Best regards,
Anupa

What is the transaction code for where used list

hi,
 what is the transaction code for where used list and
 how to retrieve the previous delivery quantity and quantity delivered for a particular material with reference to both material document number and material number.

hi,
there is no transaction code for where-used-list..
its one of the buttons in application tool bar which if you click will tell you where,in which program or tables etc this object is used.
to retrieve the previous delivery quantity and quantity delivered for a particular material with reference to both material document number and material number,
use tables likp lips and mara and use material number and document number in where condtion.
regards,
pankaj singh
**** please mark all helpful answers

What is transaction code for shipping point determination

what is transaction code for shipping point determination in a plant

Shipping point determination happens based on,
1. Shipping condition from customer master
2. Loading group from material master and
3. Delivering plant.
You can define all of them in OVL2.
Thank you
ANil

How to create Transaction code for Table Maintanance generator.?

Hi,
I have created a Z Table. and I maintained the Table maintenance generator for the same. Now, my requirement is.. I have to create Transaction code for maintain and Display of this Z table.
Can someone help me how to create the transaction code for Maintain and Display of the table. I know that we have to create a Transaction code for 'SM30'. Can someone tell me the steps to do the same. When I goto SE93 and say CREATE transaction, I get 5 options, Which one to select and what are the details should I provide in the subsequent screens.
Thanks in advance.
Best Regards,
Paddu,

Hi,
     Check the below steps......
1. Go to Tcode u2018se93u2019.
2. Select ' Transaction with parameters'.
3. Then Transaction 'SM30' with click on skip initial screen
      VIEWNAME : XXX9tABLE NAME)
      UPDATE   : X
4. Maintain the Table maintenance generator
Authorization group : &NC&
Authorization object :
Function group : name(xxx)
Maintenance Screens :
Maintenance type : One step
Maint Screen No : Overview screen (2)
If still u have problem I will send u steps with Screen shot ...send me Yr id.
Regards,
Biswanath

How to Create Transaction code for a Report

Hi Gurus,
I created some reports and I wants those reports
should be placed in the SAP Menu(initial screen) not
in the User menu in the form of Transaction codes.
I would really appreciate if any one can please send the process to create transaction codes for the User reports/Report groups in R/3 and how to add those created Transaction codes to the SAP MENU.
Thanks in Advance
Danial

Try to insert it into the main menu if you must change S000 (there is a function module for everything)? Perhaps SAP protects their menu trees from foreign subnodes in SE43?
Also note that for report transactions you do not need to give the user transaction code start_report. If you do, then they could enter it directly and potentially start many other reports too. The system will call start_report for submitting the report internally without authorizations for it required (unless start_report is maintained in SE97).
Regarding DE, this also confuses me sometimes and I noticed that it generally indicates that I am doing something which has an implication for a SAP standard object. Try either hitting the enter button to see what the next screen is, or, choose original language in the previous screen, or, logon in sy-langu = DE and (remember the path if you dont speak German) change it, or, follow JCs advice to create your own menu.

Transaction code for Creation of Material

Similar Messages

Maybe you are looking for