Transaction for Output for transportation planning simil VF31 o Vl71?

Dear Expert,
Anyone knows if there are a transaction or a program to run, wich trigger the message wich are in status 3. in the Transport planification (O4F1)?. simil vf31 or VL71?.
I will appreciate your help.
Best Regards,

Hi Ravi,
If the despatch time was 4 earlier, it is not possible to change to 1 as the output is arleady processed. Hence there can be a case that your assumption of the output being at 4 initially is incorrect.
Please go to the table NAST. Check how many records are there for the output for your problamatic documents. If there are morethan one record in NAST, then may be the latest one has 1 as the DT while the oldest one will be 4.

Similar Messages

  • Best Settings for output for HD MPEG 2 files

    hi,
    I'm working on a project with HIGH Res Stills, animating in FCP 4.5
    then outputting for a client who wants to view using MPEG 2 files
    playing on a HD Monitor. My original pic files are on average,
    4000 pix by 3000 at least. What are the best sequence settings?
    DVCPRO 1080i60? or 1280i HD TV? and...what codec should
    I set my Quicktime to...there's no MPEG 2 setting in FCP 4.5?
    Should I do 10bit uncomressed, render a QT, then export that
    as an elementary MPEG 2 Stream out of Compressor or QT Pro? I don't have an HD monitor, so I'm trying to figure out which sequence and export settings will render the most high DEF output? Any thoughts would be MUCH appreciated.
    thx
    G5 Dual 1.7   Mac OS X (10.3.9)   thanks for your advice!

    Thank you for your reply, I've been waiting for any advice before I exported!
    Okay, so definitely recommending
    Format h.264 with 1080p 25fps, progressive  as an .MP4 instead of .MOV?

  • Bridge cs5 won't display controls for output for pdf or web

    hi, selected some images to create a contact sheet, but when i clicked on "output" nothing appeared in the window, as if this module didn't launch.  any suggestions for a reset?  i'm at a college, so it will be a pain if i have to reistall software (IT guy has to do it).  nothing in bridge's preferences refer to the output controls.  any help appreciated.
    mark

    nothing in bridge's preferences refer to the output controls.  any help
    appreciated.
    In general you don't need to reinstall at first trouble. A restart holding
    down option key and from the pop up menu resets all preferences to default
    settings including the default workspaces.
    But could you be a little more specific about your workflow, f.i. on what
    output you are clicking for the module (the default workspace, the icon or
    menu view-workspace-output) And does that window look as output containing
    at least the content panel, preview panel and output panel with all its
    settings (document-lay out-overlays-header etc).
    Maybe you can provide a screenshot of what you are seeing when in output?

  • Best settings for outputting for web

    Hello All!!
    I'm hoping someone can help me out.... I'm outputting quicktimes to be uploaded to a web server so they can be embeded on a site for a show reel. What is the best compression setting for a quicktime that maintains it's image quality but loads fast? I've been using h.264 and limiting it to 700 and 800 kbps, im 4:1 audio, deinterlaced, 720x480.
    the quicktimes range in length from 1min to 4min. I used Vimeo's setting and that looks the best, but takes too long to load on web server.
    I've tried different rates for kbps as well as all the suggested pre-sets in Compressor, and my qt's are still coming out 'soft', and I'm not sure what else to try.
    I'm on a MacBook Pro 10.6.7 with 2.6 ghz Intel Core Duo and 4gb of memory, FCP 7.03.
    Thank you for all suggestions and help!!
    -K

    You'll just want to play with it. One trick I like to use, if there's not a lot of panning going on in the audio, is to drop the audio to mono. Cuts the audio bandwidth in half, allowing more room for video to move.

  • Access for output for PO failing

    We are trying to get PO output based on vendor/material for PO type NB.  The system is not finding the material that is stated in the PO.  We have tried lots of combinations in the condition table and it just gives a  !  on material.  Any hints as to what we are doing incorrectly?  Thank you!

    Thank you.  That is helpful information.  The access table has material as a field but it definitely does not want to fill it in.  Accounting has decided to get rid of an internal vendor number and have us use another internal vendor number for multiple company locations.  The only way to get around that is by material number designation and since the same person would be entering these PO's that get shipped from various locations, multiple purchasing groups would not be a good solution.  We think we will have to go back to accounting and ask for multiple vendor accounts so we can drive this output.  It is disappointing that material is listed as an option.

  • Delivery 0080000276 is not relevant for transportation planning.

    At the time of (delivery related) invoice creation, system throws a message "check the error log".
    Log says:
    " Error Log             0080000276 000010 Delivery 0080000276 is not relevant for transportation planning
                LongText
                    Detail
                     Diagnosis
                         Copying control for billing requires that shipment costs
                         are copied from the shipment belonging to this delivery.
                         No shipment costs could be determined, because this
                         delivery is not relevant for transportation planning.
                     System Response
                         The system assumes that no shipment costs are to be billed
                         in this case.
                Technical data
                    Tech. data details
                     Client                                 251
                     Group Number
                     Sales Document Number                  0080000276
                     Item Number of the SD Document         000010
                     Schedule Line Number                   0306
                     Counter in Control Tables              00
                     Message Identification                 VY
                     System Message Number                  306
                     Output Type                            I
                     Message Variable 01                    0080000276
                     Message Variable 02
                     Message Variable 03
                     Message Variable 04
                     Group Type                             F "
    Please advice if anyone have any idea for this error log.

    Error Log 0080000276 000010 Delivery 0080000276 is
    not relevant for transportation planning
    It is not necessary to assign the Transportation Planning to Delivery type.  Only recently, I completed a similar configuration and running successfully for a client.  The issue is  because of your copy control VTFL.  For more information, check note 713171.
    thanks
    G. Lakshmipathi

  • Standard message type to transfer data for transportation planning

    Hi,
    We would like to develop a interface that would transfer the following data from SAP to another system (called Vista).
    "(Past) Receivings and requirements shall be considered in the transportation planning. Transfer the requirement information from the ERP system to Vista for the transportation planning."
    Is there any standard message type (or any other std solution) in SAP that can transfer this data from SAP to legacy system(Vista)?
    In general how does one identify for any given requirement, if there exists a standard message type (standard solution) of transffering data from or to an SAP system
    Thanks in advance.
    John

    Hi,
    U can go throught this sap help
    http://help.sap.com/saphelp_45b/helpdata/en/b5/9c48ebfc6f11d1bf5a0000e8a7386f/content.htm

  • Selection variant for transportation planning.

    Dear All,
    Can you please let me know how to configure Selection variant for transportation planning.
    Regards,
    Sunya

    Hi Sunya,
      Check the links below.
      http://help.sap.com/bestpractices/industry/pharmaceuticals/v346c_uk/documentation/SCM/_Toc27302002
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8bbeae90-0201-0010-f887-8287448cbb9b
       In these you wil find the selection variant for transportation planning
       Reward points if it helps.
    Regards
    Karan
    Message was edited by:
            Karan Bhatia

  • Transportation Planning for Shippers RDS

    I'm implementing SAP TM 9.0 Transportation Planning for Shippers RDS.
    While trying to activate this solution in Solution Builder I get following errors:
    1. Error@ ECATT /SMBERP/XK01_O001_T55 in BB TM1 (XX) of scenario T79 does not exist in system
    2. Error@ ECATT /SMB50/WE21_O001_E04_01 in BB TM3 (XX) of scenario T79 does not exist in system
    3. Error@ BC Sets /SMBA0/V_T681F_B4E2_J01 in BB TM7 (XX) of scenario T79 do not exist in system
    Installation files (INST_FILES_TMS_XX_BP_ERP606V7.zip file) were downloaded properly, but these ecatts are missing somehow. Did anybody face with this problem?

    Hi Erica
    We do have expertise in this area and can handle the projects. Please let me know your contact details or write to [email protected] or reach me out on +91 99595 99887 to discuss further on this.
    Regards
    Krishna

  • Memory-Based Snapshot Main Process for Transportation Planning getting erro

    Hi All,
    I have created a Plan in Transportation Planning module and asigned a facility to that plan then i did launch plan, then the program 'Launch Transportation Planning Process' running successfully but with that program Memory-Based Snapshot Main Process for Transportation Planning running and error outing.
    the completion text is:
    The executable file /u04/NRVIS/apps/apps_st/appl/mst/12.0.0/bin/MSTSNWRK for this concurrent program cannot be executed.
    Contact your system administrator or support representative.
    Verify that the execution path to the executable file
    i have verified the path but there is only have '/u04/NRVIS/apps/apps_st/appl/mst/12.0.0' but no /bin/MSTSNWRK file
    can anyone tell me what has to be there actually, is MSTSNWRK file missed?
    thanks
    vijay

    Thanks for your suggestions. I finally able to resolve this issue.
    - I'd relink all MSC and MSO exe files. No error found. Still not unable to launch Memory-Based Snapshot.
    - I'd turned on all possible debug, trace, etc to see any possible reasons for the failure. But no help at all.
    I almost created a TAR (which will need to run numerous useless checkings, talking to some clueless people, and waiting for weeks for doing nothing) and I found out I forgot to check one place - Windows Event Log. Bingo - I found the error and it's because of DLL unmatched (typical Microsoft DLL hell issue).
    Using Dependent Walker to see the linking of the MSC exe file, and then I pinpointed which version of MS C++ libraries were missed. Installed the latest MS VS2005 and 2008 redistributable libraries, relinked MSC exe files again, and FINALLY it's fixed.
    I need to talk to the DBA who prepare this clone to me....
    Edited by: 960630 on Sep 24, 2012 1:01 AM

  • Why one user can not see plan output for some orgs while other users can?

    We have several inventory/planning orgs. Suddenly one of the users is not seeing any plan output for some organizations. While other users are able to see plan out (planner workbench) for all org.
    All users use the same responsibility.
    Deleted all the folders to eliminate hidden query in default folder.
    Any other thoughts?
    Edited by: 918894 on May 5, 2013 10:22 PM

    The issue is resolved.
    In the user preferences, one user has Inventory Category Set and other user has Planning Category Set as the default. Items belonging to one Org were not assigned Planning Category Set. Thus they were not showing for the other user.
    Thanks for the response.

  • Explain plan output  for a sql in JSP page

    Hello all,
    I have a requirement to give SQL query as an input and get the output and explain plan in the same JSP page. i could get the SQL result, but i want to get the EXPLAIN Plan.
    can any one help me in this.
    Thanks
    Kiran

    Hello all,
    I have a requirement to give SQL query as an input and get the output and explain plan in the same JSP page. i could get the SQL result, but i want to get the EXPLAIN Plan.
    can any one help me in this.
    Thanks
    Kiran

  • Transportation planning point for freight settlement

    Hi,
    Previously with std ECC set up we used to have the config related to asisgnment of transportation planning point with shipping condition, porg,pgroup and plant.Now with TM 9.1 in place do we still require the above config as part of settlement of freight charges considering it a shipper scenario?

    These configs are not required in a  normal scenario.

  • Output for shipments - VT70

    Hi,
    I want to execute the output for the shipment documents.
    In VT70 selection screen I entered transportation planning point, processing mode, flagged u2013 shipment and entered the output type and executing.
    I am getting a message Additional shipment data is required for determining output. If I entered shipment number and without giving any details I am able to execute but if I enter transportation planning point, processing mode and checked the output data for the shipments I am getting a message - Additional shipment data is required for determining output.
    I checked in VT02N output type is being triggered for the shipment document.
    Can someone help me what information should I enter to execute the list.
    Thanks.

    Hi, Thanks for the response.
    Can you please advice me what to check in this parameters and where to insert these parameters before I execute?
    Thanks

  • Error "You cannot enter a partner function for output NEU"

    Hi Experts,
    I'm having these error "You cannot enter a partner function for output NEU" (message VN041) when I tried to assign a partner function (e.g OA)  in the conditions records for application "EV" (Purchase outline agreement). The system do not allow me to do this for any doc type (LP, LPA, MK, OA, etc). I'm using t-code NACE or MN08.
    I want to assign partner for key combination "Document Type". The conditions is already there but with no value, so I want to assign partner function "OA" or "VR".
    I already check all the configuration and looks fine. For example, define possible partner functions for output type "NEU" for application "EV" (Purc outline agree).
    Hope you can help me to find the problem.
    Thanks,
    Mairo.

    I have the error in NACE or using tcode MN08.
    As soon I executed those transaction the system shows the condition records created for varios Doc Type (e.g LP, LPA, MK, etc) but with no partner function assigned. For example:
    Doc. Type /  Name                     /             Funct  /   Partner     /            Medium  /  Date/time  /   Language
    LP        /       Scheduling Agreement     /  blank  / blank  /                                          2      /          3   /              EN
    LPA      /      Scheduling Agreement                              / blank    / blank   /                1        /       3         /        EN
    For example, I try to assign function "OA" for Doc. Type "LP", choose value from quickpick. Then when I press enter, the system give me the error "You cannot enter a partner function for output NEU", message no. VN041. Do not allow me to continue, so I have to leave this field blank, with no change.
    Thanks,

Maybe you are looking for

  • How do I stop, cancel or block my Online Number?!?...

    Dear all, I checked many of the FAQ's at the Skype forum, but I can not find any answer to my question. I really hope somebody can help me out with the following: I do have an online number for one of my clients, but I need to stop or transfer this t

  • Help! Moved a project from laptop to desktop files are missing

    hi, sorry I am a premiere elements 7 newbie. I started my project on my laptop but unfortunately it hadn´t enough space and was not aible to work with the data flow. i bought a desktop and made the mistake that I only copied the "premiere elements pr

  • Difference in PL/SQL between 8i and 9i

    Hi Where can I find the exact differences in PL/SQL alone between 8i and 9i from developers point of view. I appreciate your help Thanks

  • [solved] Brother DCP-110C and CUPS 1.2.x

    Hi, my girlfriend's multifunction printer/scanner-combo from Brother doesn't work. There are drivers (cupswrapper) directly from Brother, but they don't work. There are no error messages in the logfile of cups and the Brother-Logfile. CUPS detect the

  • Where is the orange Firefox box

    I don't have the orange Firefox button in the upper left corner. I just downloaded Firefox and the button was not there.