Transaction LS10 - mass creation of WM storage bins - in Production system

Hi,
Does someone know, if it is possible to make the Transaction LS10 open in a production environment where the customizing is
blocked for changes.
In the reality the users need to have this Transaction for Creating new bins in massive way. Up to now it is job of the IT and then
release the change request to production. But also the generation of the new bins is only in production system possible, when
it is open for a short term to create the new bins.
thanks for you help in advance
Michael

Thanks for your question.  I know LS05.
I (and the users) want especially use LS10 and create also in Production mew sequences and structures.
do you know a possibility for this?
thanks

Similar Messages

  • Creation of New storage bins for storage type 007 in Production

    Hi Gurus,
    Coudl you please give me a clairty, storage bins can transport from Qaulity or we have to create seperately from server to server like Qulity and production.
    thx
    r

    Hello,
    As correctly mentioned storage bins never transported from one environment to other. You have to create through LS10 or LS01N.
    The bin structure can get transposted from one environment to other & then you can open the structure & create bins in numbers.The bin structure can be seen through LS10 & created through same transaction.
    Regards,
    Prashant

  • Send Storage Bins to external system (change pointer, change document, ...)

    Hello,
    I need to send to my external system the storage bin modifications, namely, insert and delete information.
    I haven't found any User Exits ou BADIs to the LS01 transaction.
    I'm trying to do this using change pointers, but it doesn't seems to exist a standard way to this either, so I've created a custom Change Document for the LAGP table, but there's still no records in the CDHDR or CDPOS tables.
    Is there a way to automatically generate this records without programatically calling the Change Document associated FM?
    What are the options that I have to do this?
    Thanks in advance,
    Rui

    Hello Rui,
    perhaps you can use DBTABLOG (Think about data volume and performance).
    http://help.sap.com/saphelp_40b/helpdata/en/34/60b6bfae724effe10000009b38f91f/content.htm
    Best Regards, Dirk

  • MASS CREATION OF INFOOBJECTS IN BI 7.0

    Hello Gurus,
    Here is my scenario:
    we have more than 100 new Z fields in R/3 (Tables: KONV, KONP, VBRP) and we are populating those. We maintained the Datasources with that fields. Now we need to develop new infoobjects in BW for those Z fields. Is there any possible way for mass creation of infoobjects.
    I searched about this, but most of them were used only for 3.5 data source.(eg: CTBW_META  - transaction for mass creation of infoobjects in bw 3.5)
    Please anyone help me in solving this !
    Thanks in advance .

    Hi,
    One option I thought of, but never applied in practice. Create an excel with all the field related information in the structure of table,
    RSDIOBJ Directory of all InfoObjects
    RSDCHABAS Basic Characteristics (for Characteristics,Time Characteristics, and Units)
    *RSKYF Key Figures
    RSDTIM Time Characteristics
    RSDUNI Units*
    And upload this table with the flat using function module etc.
    But then you would need to update below tables to with relevant details.
    RSDIOBJT Texts of InfoObjects
    RSDIOBJ Directory of all InfoObjects
    RSDIOBJT Texts of InfoObjects
    RSDATRNAV Navigation Attributes
    RSDATRNAVT Navigation Attributes
    RSDBCHATR Master Data Attributes
    RSDCHABAS Basic Characteristics (for Characteristics,Time Characteristics, and Units)
    RSDCHA Characteristics Catalog
    RSDDPA Data Package Characteristic
    RSDIOBJCMP Dependencies of InfoObjects
    RSKYF Key Figures
    RSDTIM Time Characteristics
    RSDUNI Units
    Edited by: Parth Kulkarni on Jun 22, 2011 4:56 PM

  • Picking from another storage bin

    During picking TO creation the system automatically determines the source storage bin from where the materials should be picked. Lets say the items to be picked are not there and cannot be picked. In this case the operator should be enabled to pick from another storage bin, however the system does not allow this. (This is via mobile data entry and in a bulk SU manages st. type).
    Is there a way to allow picking from another storage bin? If not, can the TO be created without any source determination? Even if I switch off picking strategy, the system expects entry of source bin at TO creation.

    Hi,
      With out a source storage bin , pick TO cannot be created currently. If at all you want a different source bin, you have to cancel the TO, block the current bin and then recreate the TO. That is an exceptional case and should be handled inside the system.
    Thanks
    Vinod.

  • Creation of Mass Storage bin

    Hi,
    We need to created storage bin for warehouse. we were planning to use LSMW. We cannot use auto creation of stroage bin LS10 since the numbers are not in a proper sequence.
    However we need to add value to the field 'Sort fld pick' for every storage bin which will be used latter for sorting the storage bin in pick list.
    This field is not available when u create storage bin. This field is only avaialble when u are change mode after creating the storage bin.
    Also we cannot use the customization for define sort sequence for stock removal.
    Can anybody help me how to fix the issue.
    thanks in advance
    Regards

    Hi,
    Storage Bins creations and Sort fld stck plcm/Sort fld picking are all  master data maintenance, to maintains these you need to create LSMW or BDC. There is now option on customization etc.
    let me know if you have any more questions.
    Regards,
    Madhu

  • Online Storage bin creation

    Hi,
    I have few doubts in WMS area and they are
    1. When we create Picking area and without picking area can we do the outbound delivery activities. What the relation between shipping point and picking area.
    2. While creating storage bins which option do we use, i.e. Create storage bins immediately or on batch mode. If we have to
    create in batch mode which batch job we have to schedule. Which one is client prefferable immediate creation or batch creation.

    Answer to your second question is that ,
    Either you can created through bin structure i.e LS10
    Secondly create program with LS01N transaction to load as many bins as you want.
    This is your choice.
    Regards,
    Prashant

  • Storage bin creation through LS05.

    Hello Experts,
    we are using barcodes and  I have to create storage bins. For this Verification is mandatory through LS05 or can we create thorugh LS10.
    I observed that in LS05 screen, sequence number and what does it indicate.
    Can any boyd please send the information or link for storage bin verirfication and creation thorugh LS05.
    Thanks
    Raghu.

    Thanks you Swagat and night for your reply!
    Here what is the use of verification and do we have to update any master data for this purpose and in LX45 screen it is asking Bin coordinates, in that field what exactly we have to fill.
    Thanks in advacne.
    Raghu

  • Transport the created Storage Bin Automatic from develop to quality LS10

    Hello,
    My customer has created a new entry in LS10 u2013 Create Storage Bin Automatically in the development system with a transport order.
    He forgot to do Environment u2013 Create bins. I did it with my user in the development system and SAP has created the bins automatically (the system creates and launch a batch-input). The system did not ask me for a transport order (I think because this created data is master data).
    The user has transported the transport order from development to quality system but the Storage Bins are not in QAS. I told to the user that the Storage Bin are master data and we has to do Environment u2013 Create bins in each new environment but LS10 transaction has status 'not modifiable' in quality and production system.
    There is a way to transport the created Storage Bin Automatically from development to quality and production? Now the user is asking me to have the Storage Bins in quality and production with access LS10 in status 'not modifiable'.
    Cheers,
    Marta

    I could not transport them but I have created the storage bin directly in QAS with LS05 because LS10 is not available.
    Thank you very much.

  • Inspection lot creation on storage bin

    Hello all,
    I am wanting to learn how to create an inpection lot of stock within a storage bin.
    I ask because we have many storage bins in our warehouse location storing the same material.
    If I do a MIGO 322 transaction in inspection lot there is no where to specify bin location, it looks at the warehouse as 1 storage location.
    In the lower half of the migo screen there is a 'storage bin' section but it is blocked out and I cannot identify which storage bin I am wanting to inspect within that storage location.
    I know I can create a transfer through LT01 however this still doesn't appear in QA32 inspection lots.
    I want the bin location to stay in the same storage location but be flagged for quality inspection.
    Thanks,
    Chris
    Edited by: gmanwizo on May 7, 2011 5:58 AM

    Hi,
    It seems you have both MM and WM activated. You have to assign storage locations to warehouse numbers in customizing, definition of organization step. Then when you do a 322, transfer requirements will be created by the system and you can transfer the material to a storage bin by turning the requirement into a transfer order. Assignment of new storage locations to warehouses may be tricky, you better ask for consulting on this matter.

  • Transaction code for mass creation of physical Inventory document

    what is the transaction code for mass creation of physical Inventory document.

    MI31 is the transaction to create hundreds of physical inventory documents for annual inventory at a time.
    MICN can create several documents at a time for cycle count.
    Just look in the menu of phyiscal inventory into the knot Sessions, there are even more e.g. for counting of own stock a customer and vendor location, for vendor stock at own location etc.

  • Storage bin Type Change during TO creation

    Hi friends
    Is it possible to change Storage Bin type (Not Storage bin no)during Transfer Order (TO) creation in LT06 / LT04 ? If so please let em know the procedure to bring storage bin type during TO creation.
    Please confirm
    Rgds
    Madhavan

    Hi,
    Please check and try to define Storage Bin Type (SPRO->LE->master data->storage bins), then activate  Storage Bin type search strategy in OMM1.as appropriate. (in my past experience system given priority to Storage type search and then to Storage BIn type search during picking- I am not sure whether this is the SAP logic or priority).
    Once you define and assing the Storage bin type to Bins this will be available during creation of TO.
    Hope this helps.
    Thx
    MJ

  • Not all storage bins in LX16 transaction Carry Out continous inventory

    Hello,
    I would be please if anybody knows the way of working of transacction LX16. Our client is running this transaction and have the problem that for a warehouse number and storage type, the report not shows all the storage bins that is created and with stock. If we run LX03 transacction, for the same selection we obteins all the storage bins, but if we do the same for LX16 the storage bin is not showed.
    Can somebody help us??
    Thanks in advance

    hi
    LX16 transaction is only for " Continious Physical inventory Counting Only"
    LX03 is for bin status Report
    Take Continuous Inventory
    Purpose
    With the continuous inventory method, you take inventory for a certain number of storage bins in a storage type. The inventory can take place at any time during the fiscal year.
    Continuous inventory has the following advantages over the annual inventory count at the end of the fiscal year:
    The effort and costs for the inventory is not concentrated on a certain day or days but is distributed over the entire year. This means that the warehouse supervisor can plan the workforce needed for the workload in the warehouse more accurately.
    Inventory can be conducted during slow times in the warehouse, such as during summer vacation periods.
    With a reduction in the effort required at the end of the fiscal year, you can respond better to problems that might arise during a year-end closing.
    When an inventory is carried out on a continuous basis, up-to-date information about the correspondence between the warehouse stock and the book inventory is always available.
    Prerequisites
    Inventory methods are defined for each storage type. To define a continuous inventory for a storage type, see Activities ® Physical Inventory ® Define Types per Storage Type in the Warehouse Management section of the Implementation Guide (IMG) documentation.
    Process Flow
    To run a continuous inventory, you need to complete the following steps in the order displayed:
    Plan the inventory by selecting storage bins, for which you want to take inventory.
    Create the system inventory record
    Activate the system inventory record
    Print the warehouse inventory list.
    Take physical inventory in the warehouse.
    Enter the inventory results
    Close the inventory
    Process differences in Warehouse Management (WM) and record them in Inventory Management (IM).
    hope this helps to solve your issue
    regards
    KKY

  • Storage bins creation in production server

    Hi Gurus,
    After transporting the request for the automatic storage bin structure from Quality to production, how can i create the bins by using that structure in production?
    is the same way like how we are creating in normal process (Select the Structure and choose the Environment and click on create bins and the Choose the On line creation then over)?
    can any confirm it?

    Hi
    You can use same method as in Dev , For automatic Creation u can use t code LS05

  • Interim storage bins creation, List of standard interim storage bins

    Hi,
    We need to create interim storage bins as part of cutover. can someone provide me list of standard interim storage bins to be created. Which transaction will be used to create interim storage bins
    Thank you

    Hi,
    You can use the transaction LX20 to create interim bins.
    Following interim bins will be available in the standard.
    001     901    WE-ZONE
    001     902    WE-ZONE
    001     910    WA-ZONE
    001     917    QUALITAET
    001     920    UML-ZONE
    001     921    UML-ZONE
    001     922    U-ZONE
    001     980    DUMMY
    001     998    AUFNAHME
    001     999    DIEBSTAHL
    001     999    SCHROTT
    Thanks & Regards,

Maybe you are looking for

  • How can I change dates to the UK format, DD/MM/YY, in Mac Numbers?

    How can I change dates in Mac Numbers to the UK format of DD/MM/YY? When I correct them individually they automatically return to the US format.

  • I Cant play burn DVD due to no support of superdrive??

    I tried to turn on the iDVD application and had the following comment pop-up "Your Macintosh doe snot have a supported Superdrive. Please note that while you will be able to work with iDVD projects, you will not be able to burn a DVD disc" This is cr

  • Moving images with transparency

    Hi, I am quite new to keynote so hope this is not smt already solved in someway. I just noticed you cant move or select an object that has transparency so easily. An example would be a formula I copied from word. if I click in a transparent spot I ca

  • COGS at standard, broken down / cost components

    Dear masters I went through numerous post but could not find the answer We here do not have COPA. However I wish to find a report that would break my COGS at standard, into the cost components. (raw material, labor..) Do you know of any such report?

  • Switchport port-security on Routers ?

    Hi All, Wanting to restrict LAN ports on a 857 router to particular MAC addresses. But the router doesn't support the switchport command at all. So tried on 1800 series and though it does support "switchport", it doesn't support "switchport port-secu