Transfer from One Consignment stockiest to another
Hi,
I transferred material from manufacturing plant to one consignment stockiest through Fill up Order. Now I want to transfer material from this consignment stockiest to another consignment stockiest without taking material back to the plant.
How can I do this in SAP..?
Regards,
Falgun
Dear Falgun,
There is no any standard solution for the scenarios e.g., stock transfer from one consg agnt to another consg agnt (In your case one stockiest to another). Better you first create pick up against the fill up, and create Fill Up for correct stockiest.
Thnx,
Pratik
Similar Messages
-
Process steps for Capital goods transfer from one exciseable plant to another exciseable plant
Please guide me about below mention process :
Capital goods transfer from one exciseable plant to another exciseable plant with updation of RG23C register.
Goods purchase in prev month.Company code to company code u have to treat the another company as Vendor/Customer in each company code books. Then the process is same. Sale order, delivery and billing to the Customer(2nd company code i.e. stock receiving company code). Then in receiving company code based on the delivery document of other company code GR can be made. and IV.
-
HT4528 If I transfer from one iPhone 4 to another iPhone 4 will I lose my voicemails?
If I transfer from one iPhone 4 to another iPhone 4 will I lose my voicemails?
Not if you backup your old phone and then restore your new phone to that backup http://support.apple.com/kb/HT1766
-
I'm doing a transfer from one macbook pro to another. I have CS4 Photoshop Extended. When I go to open it on my new computer it says error 150:30.
Don't try transferring Adobe software. It rarely works and usually breaks the activation mechanism (150:30 error).
Uninstall, run the Cleaner tool then re-install from scratch.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
How to transfer from one external drive to another?
I am trying to move files from one external drive to another. I can write to both drive from my Mac. When I do a large transfer using Finder, I only get a few files and an error code 50.
I'm using two Seagate drives, one formatted for Mac only and where I'm writing to, and one formatted for PC and Mac. I have written and read successfully to both drives.I moved some movies and some seldom listened music (coped the files) into a folder on the Lacie drive. Then I reimported them to the main itunes library while holding down "option". This created a link to those files to the external. the files show up in my itunes but cannot be played unless i have the Lacie connected to them.
See this link.
http://www.maclife.com/article/howtos/how_split_your_itunes_library_across_multi ple_locations -
Material Transfer From one Material Type to another should not be possible
Dear Gurus ,
I have a issue here i want to lock the transfer posting from one Material Type to Another Material Type . The point is the Transefr Posting Shuold happen from same Material Type . So can anybody help me out that what should I do for the sameHi ,
I tried for the same but its not working . I just kept a Break point in this exit . Tried to transfer from MB1B its not stopping at the Break Point Can U suggest as I am doing it from MB1B .
Regards
Shankar -
Asset transfer from One Business Area to another Business Area
Hello,
I am going to transfer my Asset from One Business area to another business area. So, I allready created a new asset and transfer through TCODE-ABUMN. But system gives me this error
Posting with trans.type 320 not possible (No acquisition posted)
Message no. AA324
Diagnosis
Transaction type 320 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
Procedure
Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
can any one please tell me how I transfer my Asset from one business area to another Business area?Hi
First make sure in your company code global setting in the OBY6 for company code wise ..Iin this screen Indicator: Business area financial statements required if it is ticket
Please don't change business area for old asset . because it will effect the Business area balance sheet. So create new asset and change business area at cost center level
Finally transfer the balance from old asset to new assets in the ABUMN
OR
IF you want solution as per your issue ..Go to SPRO-> Financial Accounting-> Asset Accounting->Transactions-> Specify Default Transaction Types
Here enter Default Transaction Types 300 Transfer of retir. old assets data from cap.asset
in the filed of Transfer Between Areas
I hope it will helps you
Thanks and Regards
sudharshana vamsi -
Stock transfer from one co.code to another.
Hi,
What is the process of stock transfer order from one co.cde to another co.code (not with in the plants of a co.cde)
Also please explain the financial effects on each steps on both side.
for Stock transfer order i need to configue the cross company code transaction.
RegardsCompany code to company code u have to treat the another company as Vendor/Customer in each company code books. Then the process is same. Sale order, delivery and billing to the Customer(2nd company code i.e. stock receiving company code). Then in receiving company code based on the delivery document of other company code GR can be made. and IV.
-
Bdget Transfer from One Fund Center to another Fund Center
Dear Frieds,
I can able transfer the negative budget from One Fund Center to another Fund Center which is wrong and want to control the same.
I can use the SAP Note:983853 but still finding the same error.
can any one please help me to restrict the negative transfer of One Fund Center to another Fund Center.
Thanks and regards,
Mahendra Dev.Dear Eli,
Thanks for your reply.
I will explain what config I did in my system.
Step 1. DEFINE KEY FIGURE - ZZCURRENT_BUDGET followings are the properties
Plus/minus sign version category value type activity budget type WF status fiscal year
+ 0 9F B1 ENTR * P -1
Step 2. DEFINE CHECK LIBRARIES FOR BUDGET ADDRESS - Create a new consistency check copying 0000002
i. PREREQUISITE u2013 Leave Blank u2013 not able to understand what validation need to put.
ii. CHECK - Left Operand- Key figure - CURRENT_BDGT_BT
Scaling factor u2013 100.00
Operatoru2013 Greater than or equal to
Right Operand u2013 Key figure - ZZCURRENT_BUDGET
iii.MESSAGE - Message Class u2013 FMCC
Message Type u2013 E
Message Number-001
Step 3. ASSIGN BUDGET ADDRESS CHECK LIBRARIES - Created Library can assign here.
Kindly let me know were I did the mistake in my config.
Thanks MD. -
Funds Transfer from one house bank to another house bank
Hi
How to transfer funds from one house bank to another house bank with in company code. Because i want to transfer funds from one house bank to another house bank. What are the steps required .
Please let me know the same
Regards
ramDear
This can be done as following
Step 1
Your have to debit Incoming bank account and credit the vendor (i.e. your own company). TC: FB60
Step 2
Make make to vendor (i.e.your own company) - Debit vendor and credit outgoing bank. TC: F-53/F-58
Best Regards
Mukesh Mokashi -
Data transfer from one sql server to another sql server in 2005
Hi,
Im trying to transfer only one table data from one server database to another server database table.both are in 2005 .Can anyone help?Hi,
Im trying to transfer only one table data from one server database to another server database table.both are in 2005 .Can anyone help?
If you are not using express you can use Import export wizard to mode data its very easy below link will help.In link destination is excel but you can select destination as your SQL Server
http://www.mssqltips.com/sqlservertutorial/202/simple-way-to-export-data-from-sql-server/
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Data transfer from one adobe form to another adobe form (offline)
Hi,
Is it possible to transfer data from one adobe form to another adobe form(offline).
Advance Thaks
Murali Papana.I dont know what your requirement but simple way is use 'Save' or 'Save as' to create a copy of offline form. ...:-)
-
GL balances transfer from one GL Account to another GL Account.
Hello All,
Can some one please tell me how to move GL Balances from one GL Account to another GL Account.
Thanks,
Balahi
i think one company code Gl accounts transfer to another company code Gl accounts
path:-
transaction code--ob_glcc01
sproimgfinancial accountinggeneral ledger accountinggl accountsmaster datagl accounts creation and processing--create gl accounts with reference.
regards
sai -
Data transfer from one BW system to another
As there are, at least theoretically, a myriad of ways to push data from one BW system to another, I was wondering if anyone had some key thoughts or experiences to share. I see that OpenHub/InfoSpoke and the Data Mart Interface / Export DataSources seem to be the main methods of choice.
What are the differences, and what are the key points to consider between these two or other recommended ways (for BW3.5)?
Thanks in advance,
ThomasHi,
In the all the data transfer between SAP systems RFC is the best option.
Just create a source system for the new BW system and it will work.
Thanks
Message was edited by:
Ajeet Singh -
Problem in J1IJ if material transfer from one storage location to another
Hi,
We have one problem we have one material WMBMOTOR while purchasing material we have taken excise duty thorugh J1Ig and while GR loocation was STCK after that I have transfer the material to another location SDLV with MB1B movement type 311 now my stock is at location SDLV, but after making delivery when i am selecting the RG23D selection thorigh J1IJ the excise invoice is not coming for selection in J1IJ what can be the problem
zafar
Edited by: zafar_karnalkar on Aug 13, 2010 11:38 AMHi,
Ref to the below details from Note 1413497 in this a ref. note given as 693562 include MJ1KO01, and in 693562 note a correction instruction given as 282511
Can u plz explain what exactly we need to do whether we have to add include MJ1IKO01 in J1IJ program or anything else.
regards,
zafar
Maybe you are looking for
-
ACROBAT 9 PRo and OS X 10.6.8
I just updated my MAC to 10.6.8 and was previously running Acrobat 9 Pro. I am using CS5 and I now can not make a PS file from Illustrator. I also can't seem to find updates for 9 PPDs
-
Blue Print for a Portal project
Hi, Can anyone let me know where I can find a template or sample of a blue print for a portal project? If possible can anyone mail it to me: [email protected] ? Thanks and Regards, Reena
-
How can I find the frequency of a signal from a turbine flowmeter?
My turbine flow meters output a voltage signal frequency. Is there are way that I can find the frequency in LabVIEW? Right now I have the flow meters wired to my card as analog inputs. Maybe I need to wire them in differently.
-
Unable to open scanned document
I'm using an officejet 8600+. I cannot open documents that have been scanned to a PDF file. This question was solved. View Solution.
-
How to make the basic graphics frame VerticalJustification as bottom align?
Hi: In indesigne CS3 script, how to make the basic graphics frame VerticalJustification as bottom align? Thanks in advance.