Transfer material from Storage location to Storage type.

Hello,
At the time of usage decision we are posting the stock in "To Reserve stock" for that we have created seperate storage location ie for Sample material.
we having two samples one is customer sample and other is in house sample both the samples we are posting in same storage location.
Client want to differentiate these two samples, so we have created two storage types.
Now My question is " can we transfer the samples in different storage types from Storage location.
This is the QM and WM integration.
Please advice
Thanks in advance.
Regards
Anil

Hello Anil
I don't think you can transfer from storage location to storage type.
If your purpose is to differentiate these two samples, then why not use different Sample types with different number ranges and thus identify them. You don't have to get into QM-WM integration just for that.
If you want you may also set up 2 different physical sample locations: That would be ideal.
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Types
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Number Range
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Locations
On the application side you may use the sample management procedures to deal with samples. See the following link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b8/b9b3341a933f50e10000009b38f83b/frameset.htm
Does that work? Let me know.

Similar Messages

  • STO to transfer material from Stor.Loc. 0001 to 0002 under the same Plant

    Dear friends ,
    Does anyone already have used the new functionlity to transfer material from Storage Location 0001 to Storage Location 0002 under the same plant  with STO ?
    Which delivery  and movement type should I use to do that ? we put a mov. type 311 but errors appear for us.
    best regards,
    Alessandro

    Hi Alessandro,
    You can very well create an STO keeping the issueing and receiving plant as same and mentioning the issue S.location and do the DO using VL10B and PGI using VL02N.
    at the time of GR you can specify the receiving S.location and post the GR.
    There is no any requirement for specific config.
    Regards
    Merwyn

  • Transfer material from one storage location to another storage location

    Is there any bapi  to transfer material from one storage location to another storage location

    Hi,
    You need to use the below BAPI
    BAPI_GOODSMVT_CREATE
    Regards
    Sudheer

  • Transfer stock from Storage Location to Bin

    Dear All,
    what is the procedure to transfer stock from Storage Location to  Bin  ( T.Code and Mov.Type)
    waiting for your Reply
    with best regards
    Suman

    Dear Kiran
    Thnaks for your reply
    Im doing Process as below...
    T.Code:LT01
    click on Transfer Order ( Header)  select WITHOUT REFERENCE
    WHNO: CWH
    MOV.TYPE:999
    MATL:
    QTY:PLANT:
    S/L
    NEXT SCREEN
    DESTINATION
    ST.TYPE:
    STORAGE SEC:
    BIN NO:
    AFTER PRESS ENTER SYSTEM GIVE BELOW ERROR MESSAGE
    "CANNOT FIND SOURCE STORAGE BIN"
    AFTER THAT IF I ENTERED 
    FROM
    ST.TYPE:
    STORAGE SEC:
    BIN NO:
    THEN SYSTEM GIVES ERROR MESSAGE
    STORAGE TYPE XXX DOESNOT ALLOW NAGATIVE STOCK FIGURES
    EVEN IN STOCK OVER VIEW MATL. IS AVAILABLE
    PL. CORRECT IF IM WRONG 
    with best regards
    Suman

  • Auto Confirmation of transfer order - 999 mvt from storage type W01 to S01

    Hi,
    I am trying to automate the confirmation of transfer orders between storage type W01 and S01 using a 999 movement type. The 999 movement type appears to work perfectly when doing a bin to bin movement within the W01 storage type (for example move batch abc from bin 01 to bin 02) no confirmations are required. However if I transfer from a bin in W01 storage type to the S01 storage type (which only has a single bin to represent a staging area) a manual confirmation of the transfer order is required via lt24 or lt12. It appears therefore that the issue is with the storage type S01 for this particular Warehouse. The setting to confirm the TO immediately is already activated for movt 999 in customizing, is there a setting for the storage type that must be defined.
    Regards,

    F1 help for field V_T333-SQUIT:
    Means that the transfer order item can be confirmed immediately during the creation procedure.
    SAP online help:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f83e4d4afa11d182b90000e829fbfe/frameset.htm
    To set the confirmation requirement for foreground processing, select the indicator for TO item can be confirmed immediately.
    As per my understanding the immediate confirmation indicator does not mean that the transfer order will be confirmed immediately. It makes possible that during the creation of transfer order you CAN put a flag in the confirmation checkbox.
    If you use it together with "propose confirmation" flag (setting for WM movement type; V_T333-VQUIT), the falg in confirmation check box will be populated automatically during TO creation.
    Edited by: Csaba Szommer on May 10, 2011 11:22 AM

  • Detetion material from storage location

    Hi All ,
    I wanted to delete a material from a storage location .Can any one suggest me to delete material from storage location other than blocking material for storage location using MM06 .I suppose that it can not done by using MMSC.
    Thanks & Regards,
    Srikanth P.

    Dear,
    If you created an material by error and you want to delete that material from the data base you can do it in this simple 4 steps. The only condition is that this material has to have no material movement recorded.
    These are the steps:1
    1) Flag material for deletion. transaction MM06
    2) Run report MMREO001 - Selection of materials flagged for deletion and select the material
    3) Run report MMREO050 Archive Materials to archive the material (some customisig settings might be required)
    4) Run report MMREO110 Deletion Program for Archiving Materials to delete the material from the database.
    These reports are called by the SARA transaction too.
    Regards,
    Syed Hussain.

  • Transfer posting from storage to storage locn

    Dear All,
    I understand we can do the transfer posting from storage location to storage location through Mvt type 311.
    The scenario is I have to transfer the goods from Storgae locn 1 unrestricted to storage locn 2 quality inspection.
    Kindly let me know if it is possible.

    Hi,
    There is no direct movement type. You have to do this in 2 steps. 1st with 311 for St.Loc-St.Loc then 322 for Unrestr to QI.
    Hope it helps
    Shiva

  • SUT selection in TO from storage type to PSA

    Hi All,
    The business process is Kanban replenishment where the CCID is scanned for TR creation for demand. TR then automatically converting to TO (movement type- 350). In TO we are getting the storage Unit type selected. need to know the basis of storage unit type selection.
    Further details of the movement as eg.
    Movement is from storage Type 030 to PSA.
    Storage Type 030 has Bulk as Put away strategy and FiFo as Removal Strategy.
    It is SUT check active.
    warehouse is HU and SU managed.
    Two kinds of SUT is there in the storage type 030 - Box and Pallet (L).
    Let me know the basis of SUT selection in above TO.
    The issue is that different material selects different SUT and there is no consistency. I checked for GR date, Quants, and material master, Move,ment Type data.
    Need help from all experts.
    Thanks,
    Shankar Kumar

    Hi Shankar,
    As per standard SAP flow,
    Step 1 ) system picks the stock removal indicator from the WM1 view of material master
    Step 2) Picks the storage type from the T334T table based on the removal indicator from step1
    Step 3) Once the storage type selected it goes and check the available Quant in the storage type
    Step 4) After selection of all the Quant it sorts the selected record based on the GR date
    Step 5) Once the first quant selected it pass all the Quant information to internal table
    Step 6) Checks the required quantity minus quantity of first quant selected if the balance is greater then zero process continue from step 2 till the time required quantity - allocated quantity =0
    Now your query how system selects the Storage unit type, as you can see from above steps system selects the  Quant and the quant is already having the Storage unit type assigned. in the below example i have four quant in the stock and my requirement is for 120 PC, you can see the Sequence in Transfer order system stamps the TO line item based on the Storage type search (003,002 in below case) and then based on ascending order of Goods receipt  it selects the Quant from within the Storage unit
    in the below example
    Storage type search strategy (Entry into T334T)
    Stock in warehouse

  • RE: Transferring stock from storage type A to storage type B

    what movement can I used in WMS to move stock from storage type A to storage type B for replenishment?
    Bye

    Hi ..
    I think for replenishments standard movement type is 319 .
    You need to assign storage type with this movement type.
    Run Lp22 or Lp24 to generate replenishment .
    If its one time activity you can use LT10 with movement  999 to transfer from one storage type to another.
    Hope it helps
    Jinoy

  • Transfer Material From Vendor to Vendor

    Please can anyone  explain material can transfere from vendor to vendor....Thank you ....Raveendra

    Hi,
    What do you mean exactly by transfer material from Vendor to Vendor?
    Are these your materials provided to Vendor?
    Or are you referring to Consignment?
    Anyway, please have a look below.
    1) Go to MIGO_TR t-code
    2) Set it to Transfer Posting A08, Other R10
    3) Use movement type 542 to transfer from Vendor to our warehouse in storage location
    4) Use movement type 541 to transfer from the receiving location in step 3 and transfer it to the new Vendor.

  • Transfer material from Valuated project non valuated project

    Hi Experts,
    While i am trying to transfer material from Valuated project stock to Non valuated project with T.Code MB1B movement type 415 'Q', I am getting following error.
    WBS element  has different inventory valuation
    Message no. CN769
    Diagnosis
    The project definition for WBS element  only allows the following stock control:
    No project stock
    No project stock with defined valuation M
    ' ' = non-valuated project stock
    'M' = valuated project stock
    System Response
    Account assignment not possible.
    Procedure
    Change the settings for the project stock in the project definition (Control tab) or use a suitable WBS element.
    Kindly suggest me how to trafer material from Non valued project stock to valuated project stock.
    Regards

    Actually, you sohuld not be transferring stock to non-vlauated proejct directly. In case of non-valuated project, stock is never valuated while in case of valuated project it is valuated. So there is basic difference in valuation method. This will create inconistency if you attempt ot transfer it directly.
    You should rather transfer this stock to general stock and then transfer to non-valuated project stock.
    Regards,
    Mahendra

  • How to transfer material from One HU strorage location another HU location

    Hi Guys
    Is there any procedure to transfer material Box from one HU storage location to another HU storage location
    thanks in advancve

    Hello,
    No you are wrong Vishal. We can use HUMO for HU movement. In the detaili of report screen of HUMO t-code, select the data and go to header tab "edit". You will get multiple option to do the transaction related to HU movement.
    Thanks
    Milind

  • Change in Transfer Order for Storage Type & bin

    Hi,
    I want to change destination bin change during TO Creation. Steps are given below.
    a) SPRO : Storage type setting: Two options are t there in stock placement section
                     Storage bin cannot be changed during confirmation
    1     Storage bin can be changed during confirmation
    I set it to 1.
    b) LT06 : TO Created.
    c) LT12: TO Confirmation: TO lines are coming grayed out. We can not change Destination storage bin, storage type , and section.
    Could you please advice me how to change TO Bins change during confirmation.
    Clients requirement: System will pick bin automatically. Print will be taken for this. Once placement is done & some of material are not kept as per TO Bin number. its a different bin,. Now User want to change bin number during TO Confirmation.
    Thanks ,
    Gupta

    Hi Gupta,
    In WM customizing - master data - storage type - in the detail data of     
    the relevant destination storage type you set the flag                     
    'Dst bin ch. during confirm.' from space to 1. Then the destination        
    storage bin "in general" can be changed at confirmation time.                                                                               
    Additionally you need to setup for the movement types that you are using   
    that you work with the new confirmation list, see detail of the movement   
    types, box screen control. (Try changing this setting to '1').                                                                               
    Please also read in the R/3 library - logistics - logistics execution -    
    warehouse management - warehouse movements - transfer orders - transfer    
    order confirmation - confirming transfer orders.                                                                               
    Here it is described when the destination bin can't be changed even        
    with the correct customizing settings.                                                                               
    If you set the indicator for Destination bin change during confirmation    
    for the desired storage type in Customizing for Warehouse Management       
    under Logistics Execution -> Warehouse Management -> Master Data ->        
    Define Storage Type, you will be able to change the destination bin when   
    confirming a transfer order if, for example, the destination bin           
    proposed by the system is damaged.                                                                               
    NO destination bin can be entered during confirmation for:                                                                               
    - dynamic coordinates                                                     
    - return items                                                            
    - Lean WM (if the destination bin is defined in the movement type)        
    - posting change TOs                                                      
    - inventory based on putaway                                              
    - additions to existing stock in storage units                            
    - transaction Confirm single item                                         
    Please check if your TO is related to one of these cases !!!
    Regards,
    Mauro

  • Upload stock for material in storage type ??

    hii
    How to increase stock for particular material in LS26??
    Stock for ware house and storage type ??
    Thanks

    Hi,
    you need to create some stock in the bin for whatever the operation you are doing. Here are the steps.
    first check if you have stock of same material in any of the other bins using LS24. If so, create TO using LT01 (mov type 999) for source and destination bin (bin of your interest) and confirm the TO. Do your operation, it should work.
    If its a test system, you can try upload stock in IM using MIGO-501 mov type or MB1B-561 mov type. Crate TO for material document using LT06 (TO may get automatically generated based on your system settings). Confirm the TO (note the destination bin). If the destination bin is not same as the bin of your interest, use first option to transfer stock to bin of your interest.
    Thanks,
    Ram

  • TO is automatically created from storage type 501 to 200

    Hi Guys,
    The system created a TO from 501 direct to 200, without sending it to the racks.
    Can someone please help.
    Regards
    Silas

    Hi Silas
    Check the config,  Storage type search sequence for Picking.
    501(GRA) is defined as a picking storage type. so system create a Transfer order 501 to 200.
    Regards
    Manish

Maybe you are looking for