Transfer ownership data from one scenario to another in HFM

I'm developing HFM Rules for a company that needs to transfer data from one scenario to another. This is so that they can perform What-if analysis on the other scenario. I can transfer the data correctly using the following code:
'This is in Sub Calculate()
'Check if there is a source scenario and transfer all data if there is
If HS.Entity.IsBase("","") And HS.Value.Member = "<Entity Currency>" Then
If Trim(HS.Scenario.UD1("")) <> "" Then
HS.Clear "A#ALL"
HS.Exp "A#ALL = S#" & Trim(HS.Scenario.UD1(""))
End If
End If
'Check if there is a destination scenario and set the impact status if there is
ScenList = HS.Scenario.List("", "[BASE]")
For CurrScen = LBound(ScenList) To UBound(ScenList)
If Trim(HS.Scenario.UD1(ScenList(CurrScen))) = HS.Scenario.Member Then
HS.ImpactStatus "S#" & ScenList(CurrScen)
End If
Next
If I extend this code to check *HS.Value.Member = "[None]"* and run a calculate on the *[None]* Value Layer, this also copies ownership methods and percentages for the relevant entity. Unfortunately, going to each parent entity and running a calculate for each month is not going to be practical since there are more than 500 entities in this group.
What I want to do is to actually copy ownership methods and percentages automatically if I run a consol. Is there a way to do either of the following:
1. Set a value for a POV that is in a different value layer?
2. Trigger a calculate for a different value layer in the rules?

Try posting this to the HFM forum

Similar Messages

  • HOW TO TRANSFER HISTORICAL DATA FROM ONE ACCOUNT TO ANOTHER

    제품 : FIN_GL
    작성날짜 : 2006-05-29
    HOW TO TRANSFER HISTORICAL DATA FROM ONE ACCOUNT TO ANOTHER
    =============================================================
    PURPOSE
    특정 기간의 Balance 를 Account 별로 Transfer 하는 방법에 대해 알아 보도록 한다.
    Explanation
    GL 의 Mass Maintenance 기능을 이용하면 한 Account 에서 다른 Account 로 혹은 Multiple Account 에서 다른 하나의 Account 로 Balance 를 이동 시킬 수 있다.
    1. GL Responsibility 에서 Other> Mass Maintenance 를 선택한다.
    2. Move/Merge 작업을 위한 Request Name 과 Description을 입력한다.
    3. Request Type 으로 Move 혹은 Merge 를 선택한다.
    4. source-to-target account 를 위해 line number 를 입력한다.
    5. LOV 에서 source Account 를 선택하여 입력한다.
    모든 Account 는 enable 상태여야 한다.
    6. target account 역시 LOV에서 선택하여 입력한다.
    7. 지정한 작업을 수행 하기 전에 먼저 확인 작업을 할 수도 있다.
    8. 작업한 내용을 저장한다.
    9. Move/Merge request 를 수행한다.
    Example
    N/A
    Reference Documents
    Note. 146050.1 - How to Transfer Historical Data from One Account to Another

    Follow the directions here:
    http://support.apple.com/kb/HT2109

  • How to transfer table data from one client to another client?

    How to transfer table data from one client to another client?

    Hi,
    Look at the Blog
    /people/community.user/blog/2007/01/07/transport-table-entries
    Regards
    Sudheer

  • How do I transfer the data from one iPad to another

    How do I transfer all of the data from one ipad to another one?

    The best way IMO is to sync each iPad with your computer. Having all your stuff backed up on a computer is a good idea anyway. Just read how many folks here are trying to recover lost stuff that could easily be copied back from either backup or iTunes on the computer.
    Sync both iPads to the computer. Transfer all photos to the same computer. Then sync again selecting which items you want on each iPad.

  • Transfer of Data from one Database to Another

    Respected Guys
    Is there any way to transfer few fields from different tables located on a Database Server used by SAP to an other database used by an another application. The other database also have same fields and and Tables structure.
    Both databases are located on different servers and are oracle9i.
    Is there any way to transfer real time data from one database to another. If not then any way by which we can preiodically can transfer the data.
    Thnx

    Hi
    U can use a <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/9c/d736b880c34f76b507bac7751a0474/frameset.htm">DBCON (Database Connection) tool</a>.
    Here you should call another database and write SQL native code in order to transfer/read the data.
    Max

  • How do I transfer personal data from one iPhone to another?

    How do I transfer personal data (contacts etc) from one iPhone to another (3GS to 4)?

    You're gonna have to start over if you want to use the backup of your 3GS to restore to your iPhone 4. So, in iTunes>Preferences(under the edit menu if using Windows)>Devices...delete any and all backups listed for your iPhone 4(there should only be one). Then, on your iPhone 4: Settings>General>Reset>Erase All Content & Settings. That should take but a minute or so, then plug your phone in, iTunes running, name it what you want & restore it from your 3GS backup. Follow this by syncing your iTunes content back to your phone.

  • Transfer app data from one laptop to another?

    Not quite sure if this is the right place for this question but I'll give it a shot...
    I've recently got a new laptop and haven't yet plugged my iPod into it yet as I'm wary about losing all my app data. I've tried searching the internet but I haven't really found anything that helps.
    So my question - if you transfer apps and stuff from one laptop to another will all the data stay with it (over home sharing or external harddrive) or will it clear all the data once I connect my ipod? Is it even possible to keep the app data?
    Please help, I'm desperate to put more music on my iPod and can't use my old laptop to do it as I can't install the latest iTunes due to lack of memory.
    Thank you
    Message was edited by: LeenaBear

    Welcome to the Apple Community.
    If you follow the method of copying the entire iTunes folder from the old to new computer here, you shouldn't have any problems.

  • How to transfer app data from one mac to another without using syncing of the iphone?

    Right, recently I have tried to change which computer my Iphone syncs with so that my older mac can be sold or disposed of in some profitable form. I have successfully synced all of my music off of one mac onto another via home sharing at which point I connected my phone to my new computer which suggested that the phone needed a software update. Immediately after doing this I realised that my updated Iphone 3GS would no longer sync to my old computer and attempted to sync it just to confirm this- it failed and stated that the iphone could only sync with itunes 10.1 which is a higher spec than that mac can hold. I then feeling doubtful that things would work out tried to carry on as if this problem were absent but I later discovered that I could only transfer the apps that I had synced to my phone to my new mac and all unsynced apps appeared lost because as I stated previously I could not sync with my older mac which contains all of their data. I have consulted the online apple manual for the phone and all it states is the method of transferring purchases in itunes which I tried and is what lead to the copying of my synced apps on to my new mac. What I am asking is is their anyway that I can 'cheat' so to speak at app transfers. I know that somewhere on my old mac the files are stored with the information of the lost apps but I cannot locate them and would not know how to merge them into my newer itunes if I were to copy and paste them to a memory stick (assuming that this is the right method) Other than this is their any other way of downgrading the upgrades of an iphone or somehow tricking itunes into running a higher update than the computer spec? I've tried all I can and this is really annoying- please help!!!!!!

    I'm not entirely sure what you're asking... I'll have to look on my Mac at home to see exactly where they are, but you should just be able to copy all the apps from your old machine to thumb drive or over the network and put them in iTunes on the new one, then sync. Right click on one of the apps in your iTunes library and choose Show in Finder. That will point you to where they are.
    If you're asking how you can do this and maintain data contained 'within' the apps themselves (high scores, game progress, etc), I don't think there's any way you can do that.

  • Transfer of data from one page to another

    Hi all,
      I am new in bsp. I have created one bsp application in which i have created one tableview iterator with button in one of its column.
      when i click on the button i am calling one page ,in which on initialization event, i have written one code to display PDF by converting smartforms OTF output to PDF.
    first time, when i click on the button on the first page all the data declared in the application class are transfer from one page to second page. and PDF gets open in another window.
    But when i close the first pdf file and again click on the button on the first page to see pdf output of another record , i found that data get initialized in the first page .hence its not transported to second page and pdf file comes as blank.
    Please help me to solve this issue.
    its really urgent.
    thanks,
    JIGs

    Hi,
    Passing params can be done via:
    - navigation->set_parameter (see http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/231779c53011d4990400508b6b8b11/frameset.htm)
    - cookies (see http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/31b97b35a111d5992100508b6b8b11/frameset.htm)
    or by working stateful (then you need to make sure that the vars are set right before going to the next page).
    Eddy
    PS.
    Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
    Spread the wor(l)d!

  • How do i transfer all data from one mac to another?

    When I started up my new iMac, there was an option to transfer all my data from my older mac (macbook air) to the new iMac. I skipped this step at first, how can I get back to this step and utilize this feature?   

    Choose Utilities from the Finder’s Go menu and double-click the Migration Assistant. Note that if you move a home folder, it’ll create a new user account for it.
    (123782)

  • How do you do a quick transfer of data from one TX to another TX with different user name

    I have more than one TX and want to keep most of the information, addresses, media, calendar as well as third party software the same on all my TX's.  Is there a way to do this without the long hassle of exporting all that can be exported, and then importing it into each TX.  Then adding all the third party software again?  I have a new TX and remember how long this takes, so I am hoping for a faster method.   I already know how to do a transfer if using the same user name, but this won't work when each will have a different user name in order to hotsync.
    This may be a different question. All the TXs will be used and will sync to the same computer via USB, and all are on the Palm Desktop.   I want to use them interchangeably.  I would also like to keep the information current on all of them, as I now must copy paste any new info (ex. new address) into each via either palm desktop, or beaming to the others.  Often this leads to discrepancies of the data between the different TXs. 
    Post relates to: Palm TX
    Message Edited by Silfox on 06-22-2009 09:03 AM

    You might look into a program called "SyncUs" from an author in the UK.  It will keep all the PIM data synced between two Palm OS units.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Transfer of data from one system to another using ALE

    Hi,
    I  had created some classes in development system than transfered them to productive system through ale, and in productive system there is lots of trasaction data is created , many sales orders etc .
    now after some time my user requested that they want to delet some of the characterstic from the classes , so in development system its not a problem as there is no transaction data , i can straight way delet the characterstic from classes, ignoring the request to check wheater its used in configuration or not.
    but when i transfer this classes to productive system through ale, i got a error that as all this characterstic s are used in past i cant delet them , and after that system ll put all the characterstic in the top of classes , ie, neglecting the earlier sequence of characterstic in class.
    we have ecm activated but its limited for changing material and boms only, for changing classes and characterstic its not in scope.
    so can you think of some solution for this problem .
    thanks in advance.
    regards

    Hi Dear,
    its possible only with the help of ECM , you need to do some work around too.
    ECM should be extended to include the classification. In fact, the EXACT SAME change number should be used. In PLM, it's important that all of the changes related to a material become active in a cohesive unit. We can talk about those details if you need some background.
    Unfortunately, in the split-client scenario, you're toast on any hope of using the same ECM number, due to the internally defined number range. The best you can do is create a new, externally assigned number range in the production client, and generate the number internally in the staging client. You can then make the change in the staging client and ALE it over to the productive client.
    The next nasty part is going to be retroactive changes. You can't simply back-date a change. You have to change every occurrence of a dependency, class, characteristic, etc, that has existed in production as of that back date. So, the smartest practice is to never allow any back-dated changes. Require orders to be cancelled and re-created with the new effective date.
    Check and revert back.
    Regards
    Ritesh

  • How do I transfer app data from one iPad to another?

    Hello.
    I have an iPad 2 and am getting an iPad Air 2 (might get the Air 1 based on some of the issues I've seen in the forums!).  I have several apps with data (VPN info, system logins, ip addresses & games with levels reached, etc).  How do I transfer over the data inside the apps when I purchase my new iPad?  I know that all of my apps will follow my apple id, etc, but does the data?

    Like the other poster indicated, you can use the backup to do that. BUT do make sure you understand what will be backed up and won't be!
    Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)
    https://support.apple.com/kb/HT5262
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
    http://support.apple.com/kb/ht4946
    iOS: Troubleshooting Encrypted Backups
    http://support.apple.com/kb/TS5162

  • Transfer data from one DATASET to another DATASET

    Hi,
      Is there a way to transfer the data from one DATASET to another DATASET?
      I tried the following
      OPEN DATASET  DS1 FOR OUTPUT IN TEXT MODE ENCODING DEFAULT .
      OPEN DATASET  DS2 FOR INPUT IN TEXT MODE ENCODING DEFAULT .
      TRANSFER DS2 to DS1.
      CLOSE DATASET DS1.
      CLOSE DATASET DS2.
      But it does not work.
      Thanks in advance.

    Hi Jason,
    This logic transfers data from one dataset to another....Kindly check..
    DATA fname(60) VALUE 'myfile'.
    DATA fname2(60) VALUE 'myfile1'.
    TYPES: BEGIN OF line,
             col1 TYPE i,
             col2 TYPE i,
           END OF line.
    TYPES  itab TYPE line OCCURS 10.
    DATA: lin TYPE line,
          tab TYPE itab.
    DO 5 TIMES.
      lin-col1 = sy-index.
      lin-col2 = sy-index ** 2.
      APPEND lin TO tab.
    ENDDO.
    "writing data to file fname.
    OPEN DATASET fname FOR OUTPUT IN BINARY MODE.
    LOOP AT tab INTO lin.
      TRANSFER lin TO fname.
    ENDLOOP.
    CLOSE DATASET fname.
    "reading data from fname and writing to fname1.
    OPEN DATASET fname2 FOR OUTPUT IN BINARY MODE.
    OPEN DATASET fname FOR INPUT IN BINARY MODE.
    DO.
      READ DATASET fname INTO lin.
      IF sy-subrc <> 0.
        EXIT.
      ELSE.
        TRANSFER lin TO fname2.
      ENDIF.
    ENDDO.
    CLOSE DATASET fname.
    CLOSE DATASET fname2.
    "displaying data from fname2.
    OPEN DATASET fname2 FOR INPUT IN BINARY MODE.
    CLEAR lin.
    DO.
      READ DATASET fname2 INTO lin.
      IF sy-subrc NE 0.
        EXIT.
      ENDIF.
      WRITE:/ lin-col1, lin-col2.
    ENDDO.
    CLOSE DATASET fname2.
    Mdi.Deeba
    Edited by: Mdi.Deeba on Feb 17, 2009 8:11 AM

  • BADI for transfering data from one modal to another modal within single appset

    Hallo Experts,
    My Business Requirement is Transfer of data from one modal to another in same environment and did this taking reference from below document.(How to custom badi for replicating destination app)
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e04b5d24-085f-2c10-d5a2-c1153a9f9346?QuickLink=index&…
    Document contains TR for implementing BADI, but this document supports bpc version 7.0 and we are using is bpc 10.0.
    So i make all compatible changes in BADI implementation and activate it. Now i am testing using transaction UJKT using following script.
    and the result is records successfully written back to application MIS, but when i check data is not moved to target application MIS.
    I am facing stuck situation in my project work. Please Suggest. Hope for positive reply.
    Script:
    *XDIM_MEMBERSET WM_ACCOUNT = WM_041,
    *XDIM_MEMBERSET WM_UOM_02 = UOM_004
    *XDIM_MEMBERSET WM_UD_2 = WM_07
    *XDIM_MEMBERSET WD_EXT_MAT_GRP =CHALK-PH-I,CHALK-PH-II,CHAVN-PH-I,CHAVN-PH-II,NASHIK-WM,RAJASTHAN-WM,TAMILNADU-WM
    *XDIM_MEMBERSET CATEGORY= Plan
    *XDIM_MEMBERSET AUDITTRAIL=Input
    *XDIM_MEMBERSET P_ENTITY = SIL
    *XDIM_MEMBERSET RPTCURRENCY = LC
    *START_BADI DAPP
       DESTINATION_APP ="MIS"
       RENAME_DIM ="WD_EXT_MAT_GRP= PRODUCT"
       ADD_DIM ="PLANT=NO_PLANT","MIS_ACCOUNTS=CAIN0058040008","COST_CENTER=NO_COST_CENTER","FLOW=Opening","UOM=AMT","CUSTOMER_SALES_2=NO_CUSTOMER","CATEGORY=Plan","AUDITTRAIL=Input"             
       DEBUG = ON
       WRITE = OFF
       QUERY = ON
    *END_BADI
    Please find attached result.
    Regards,
    Dipesh Mudras.

    Hello,
    Here is the manual to copy data between apps (it works with BPC NW75):
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0480970-894f-2d10-f9a5-d4b1160be203?quicklink=index&overridelayout=true
    It works me, but now I need to modify the Script Logic to make that a "property" from the origin dimension has to be copied to the destination dimension as "id", like follow:
    //*XDIM_MEMBERSET CATEGORY = %CATEGORY_SET%
    //*XDIM_MEMBERSET TIME = %TIME_SET%
    //*XDIM_MEMBERSET ENTITY = %ENTITY_SET%
    //*XDIM_MEMBERSET RPTCURRENCY =  %RPTCURRENCY_SET%
    *START_BADI FiltroPD
         WRITE = OFF
         APPL = $APPLICATION$
         ADD_DIM = "ORIGEN = APPVENTAS"
         ADD_DIM ="O_COSTE = no_input"
         ADD_DIM="CECO = no_input"
         RENAME_DIM="P_ACCT = RATIOS.P_ACCT "
    *END_BADI

Maybe you are looking for