Transfer Speed

Is there any way I can speed up the transfer rate between my iTunes and my iPod? Its awefully slow, and I have school tomorrow. Thanks. 8)
-Pete

Hello Velmmurugan,
I would check this with your service provider to see why you have 1 kbps rate. In the ISP there might be some restrictions, knowing that you can upload to the same FTP server with higher rate from the different path, I think FTP serveri is OK. I would also do "extended ping test" by increasing the packet size upto 15000 to see the connectivity towards the ftp server.
Do you use the same data link protocol on both links ? ( FR, HDLC etc..)
Thanks,
Hakan.

Similar Messages

  • External hard drive, error -36, corrupt files and slow transfer speeds

    This is a long post but stay with me.
    I've got an external 250GB Lacie drive connected to my 24" Intel iMac via Firewire 800. I have approximately 80GB worth of files (including my iPhoto library) on the Lacie that I'm trying to move over to my iMac but have run into some frustrating problems.
    Overall, transfer speeds are erratic – fine at times and SUPER SLOW (5 minutes to transfer a 3MB file) at other times. At first I was transferring entire folders, but after always getting errors (error -36 to be exact), I was having to transfer individual files. This works fine as long as the files aren't too big (which makes the transfer speeds SUPER SLOW) and not corrupt (which gets me an error -36). Is my Lacie crashing on me? Is there any hope?
    Here's what I've done to try and salvage my sanity with no resolve to my problems (not exactly in this order):
    1) Ran Disk Utility to repair Lacie. Everything came back OK
    2) Ran Disk Warrior on Lacie. Found a handful of bad items that Disk Warrior was able to repair. Had Disk Warrior replace the old directory of the Lacie with the new directory.
    3) Ran Drive Genius: Raired and Rebuilt the directory, did an Integrity Check (came back OK), attempted to Defrag but could not because of errors to the drive, did a Scan for bad blocks (which after running for 3 days! it was only 20% complete and had found over 150 bad blocks, at which point I quit to try something else)
    4) Checked that my Firewire cable was properly connected and replaced the older one I was using with a brand new one.
    5) Disconnected all peripherals except for keyboard, mouse and Lacie.
    6) And at times, even viewing a file on the Lacie has caused my Finder to crash, requiring a restart of my iMac.
    I'm sure I've left something off I've tried but you get the idea.
    I've read that maybe I can transfer my files using Terminal. Yes/No? Does this bypass any corruption the files may have?
    What about creating a second partition on the Lacie and moving files over to the second partition? Does this solve anything? I don't know anything about partitioning so maybe I'm talking crazy.
    I've also read that iPhoto tends to corrupt files which makes me hate iPhoto, and myself for not backing up.
    And I've read a lot about error -36's and none of it sounds good so I'm just hoping that someone might have other suggestions for me to try and save my files (especially my iPhoto files which include baby pictures that if I lose, my wife will kill me).
    So if anyone has any ideas, let me know. Please. I'll try anything.

    Hi Aaron Thompson-
    I am fairly certain you have a bad power supply brick to the LaCie drive. This is a hard problem to troubleshoot as generally when the bricks go bad they do so slowly and the drive appears to power up and stuff but it just doesn't work.
    If the drive is under warranty LaCie will replace the brick at no charge. Otherwise they sell them for around $20US on their website.
    Luck-
    -DP

  • Problems with Photoshop performance and data transfer speed on iMac

    Two months ago, I started noticing slow performances using Photoshop (above all using clone stamp tool) on my 27" iMac (late 2012). I did the AHT and I found that 8GB of 32GB RAM were broken.
    I removed them but the problem didn't disappered, I also noticed that data transfer speed (both copy and paste from/to internal HD and from CF card/external HD) was really slow.
    I tried many solutions suggested by Apple support, none of them worked out. At the end, I tried uninstalling and re-installing Photoshop: no more problems!!!
    10 days ago, I received a new 8GB RAM module and so I installed it back... suddenly, the problem came back, I tried re-installing again Photoshop but the problem, this time, still persist!
    Does anyone had the same experience? All other CC programs work well (LR, AE, Premiere...)

    yes, it does!
    what seems to be very strange to me is how data trasnfer speed could be affected!
    (just to say, I've already tried reset of SMC and PRAM, I've tried with different accounts and I've also re-installed the OS, next step would be formatting the disk and installing the OS from zero)

  • Very slow network directory listing - but fast data transfer speed once listed?

    Hello,
    I have really tried to sort this myself before opening up to the community, however I have run out of ideas, and hope someone can offer the magic solution I have missed.
    I am currently using the 3.4ghz i7 iMac on a 1GB LAN, running OSX10.7.2 - connecting to a Windows Server 2008 (Running Release 2) over ethernet.
    If i go to a network directory that i haven't recently accessed it can take up to 60 seconds to show the contents of that directory. Once i have accessed that folder, if i come out of it and go back in it will be instant again - but the first time it lists the directory it looks like i have opened an empty folder - which after anything from 10seconds to 1 minute will suddenly show the files that are there.
    Internet connectivity is fast through the network, and file transfers across the LAN are fast. (showing as approx 300mb per second) I can play and edit HD content across the network with no slowdown so I am confident that this issue is not related to the network speed itself, and is more to do with a setting on this mac.
    Symptoms are very similar to this post: https://discussions.apple.com/message/12245148?messageID=12245148&amp%3b#1224514 8 - however i understand that in OSX Lion - SMB was removed - so i cannot find this file to edit.
    I have tried bypassing additional hubs in the network by wiring direct cables to the switch that is connected to the file server, this made no difference.
    I have also tried disconnecting the ethernet cable, and running over wifi. This fixes the listing problem, but when editing HD content over a network drive, this connection is not fast enough to carry the data without interruption (some projects are linked to up to 900gb of hd video content!)
    Using ethernet, I have tried DHCP, DHCP with manual address, and manual mode. All reproduce this problem. i have tried using the windows workgroup, and tried without it.
    I have also followed this suggestion: https://discussions.apple.com/thread/2134936?threadID=2134936&tstart=45 and used OpenDNS. this did not fix the issue.
    For argument sake, I have also just tested a Macbook Pro running Snow Leopard to see if it was OS related. This reproduces the exact same problem, near instant directory listing on the wifi, a long and arduous wait on ethernet.
    I cannot work out why directory listing is instant over wifi, but not over ethernet on 2 different macs, running 2 different versions of OSX. I also do not understand why if the network is having trouble listing the directories - the data transfer speed is 300mbps when i copy files across the wired network from the file server to the mac.
    Does anyone have any other ideas as to what could be the problem here? We are about to start work on a very large project, where the content we are editing is spread out across around 200 different network folders (different shoots captured over the past 2 years). We really don't have the time to wait 60 seconds each time we need to access one of those directories to look for a file, and I am very close to pulling all my hair out!
    I really look forward to hearing from anyone who can offer any insight.

    If you are suspecting that the Windows update had something to do with your LAN going slow, then try the following:
    1.  Look for updates for your clients LAN NIC driver; or
    2.  Un-install the updates.

  • Very slow transfer speeds with external hard drives through Firewire and US

    Hi All,
    My external drives transfer very slowly on my MacPro. I've been searching for answers and have turned up very little. Apple support suggested I post my issue here. Just to make a note, I measured my disk speeds with both AJA System Test and copying files between drives and reading the Disk Activity in Activity Monitor.
    I have 3 external drives, all MyBook Premium or Professional, 1x 500GB, 1x 1TB and 2x 1TB in RAID 0. I had them on Firewire 400 and the RAID 0 2TB one on Firewire 800. My transfers on FW were all around 24MB/sec on all drives (much less than what I should be getting with FW400). I then read somewhere that the FW bus on the MacPro uses the slowest speed connected for all FW connections. So I unplugged everything but the FW800 Raid 0 drive and my transfer rate jumped to 40-60MB/sec. This is much better, but still about half or so of what I expect it should be producing from an external RAID 0 setup.
    To keep my FW800 backup drive faster, I've plugged the other two into USB2.0. The transfer speeds on both drives are now hideous, around 10-15MB/sec. This is so slow, but I'm not sure what to try to fix my speeds.
    The HD's in the external drives are all 7200rpm, and all should be transferring at a higher rate. Do you have any suggestions or ideas? Ideally I'd like to get everything transferring at rates they should be transferring at, but I'll settle with my current FW800 speed of 40-60MB/sec if I can get my other two drives transferring at a non-snail pace.
    Is this a common issue? I can't believe I'm the only one plugging multiple external hard drives into their Mac Pro. I hope someone has a fix or solution for this. I'm all ears!
    Thanks in advance.

    Hi Kappy, thanks for the information.
    So I rejigged my setup a tad. My RAID 0 is still FW800, the second drive is back on FW400 on the back port, and the third is USB 2.0 on the back as well.
    It's interesting to note that I saw the FW800 taking a bandwidth hit if the FW400 drives was being read/written to. For example, if I was averaging 50-60MB/sec on the FW800 drives and copy something large to the FW400 drive, each drive averages out to about 30/MB second, roughly half the FW800 speed I was getting. The USB while the slowest didn't cause any slowness on the FW drives.
    Here are my Xbench results. These results are from each drive being benchmarked individually with no other drives being tested at the same time.
    *MyBook 2TB in a RAID 0 configuration: Firewire 800*
    Results 75.42
    System Info
    Xbench Version 1.3
    System Version 10.5.5 (9F33)
    Physical RAM 16384 MB
    Model MacPro3,1
    Drive Type WD My Book
    Disk Test 75.42
    Sequential 80.92
    Uncached Write 69.16 42.46 MB/sec [4K blocks]
    Uncached Write 110.79 62.68 MB/sec [256K blocks]
    Uncached Read 53.66 15.70 MB/sec [4K blocks]
    Uncached Read 136.76 68.73 MB/sec [256K blocks]
    Random 70.62
    Uncached Write 36.38 3.85 MB/sec [4K blocks]
    Uncached Write 140.55 45.00 MB/sec [256K blocks]
    Uncached Read 93.26 0.66 MB/sec [4K blocks]
    Uncached Read 88.38 16.40 MB/sec [256K blocks]
    *MyBook 1TB on Firewire 400*
    Results 47.73
    System Info
    Xbench Version 1.3
    System Version 10.5.5 (9F33)
    Physical RAM 16384 MB
    Model MacPro3,1
    Drive Type WD My Book
    Disk Test 47.73
    Sequential 52.47
    Uncached Write 48.45 29.74 MB/sec [4K blocks]
    Uncached Write 53.76 30.42 MB/sec [256K blocks]
    Uncached Read 43.69 12.79 MB/sec [4K blocks]
    Uncached Read 70.91 35.64 MB/sec [256K blocks]
    Random 43.78
    Uncached Write 17.29 1.83 MB/sec [4K blocks]
    Uncached Write 98.83 31.64 MB/sec [256K blocks]
    Uncached Read 76.33 0.54 MB/sec [4K blocks]
    Uncached Read 97.01 18.00 MB/sec [256K blocks]
    *MyBook 500GB on USB 2.0*
    Results 40.60
    System Info
    Xbench Version 1.3
    System Version 10.5.5 (9F33)
    Physical RAM 16384 MB
    Model MacPro3,1
    Drive Type WD 5000AA External
    Disk Test 40.60
    Sequential 35.99
    Uncached Write 37.31 22.91 MB/sec [4K blocks]
    Uncached Write 37.22 21.06 MB/sec [256K blocks]
    Uncached Read 26.62 7.79 MB/sec [4K blocks]
    Uncached Read 50.27 25.27 MB/sec [256K blocks]
    Random 46.55
    Uncached Write 20.37 2.16 MB/sec [4K blocks]
    Uncached Write 68.44 21.91 MB/sec [256K blocks]
    Uncached Read 93.55 0.66 MB/sec [4K blocks]
    Uncached Read 86.71 16.09 MB/sec [256K blocks]
    So Kappy are you saying that those speeds look normal?
    Thanks

  • External firewire hard drive reverts to slower transfer speeds

    This is the strangest hardware problem I've come across. I'm running a unibody mbp (June 2009) with an external WD 2.0TB Caviar Green drive mounted in a firewire 800 enclosure made by icydock.
    Lately, I've noticed that after an unknown amount of uptime, the speed of file transfers to the WD external drive slows down dramatically. I figured this out by watching my time machine transfers take a bit longer after awhile, and I verified this using aja system test and speedutilities.
    When I boot my mbp in the morning, file transfers and time machine backups to the external WD transfer at a rate of about 67-75MB/s. This is the speed the drive should always be working at since it's connected via firewire 800. Aja speedtest verifies the speed is as it should be as well.
    Then, after a couple hours of using my mbp, or even later in the day, I'll transfer a file to the external WD or run a time machine backup and find that the transfer will only run at a max of 29-35MB/s. This is exactly half the speed the transfer should be going at. Subsequent transfers stay at this slower rate no matter what I do.
    However, I've been able to fix this problem by unmounting and remounting the external WD or restarting my mbp. After doing either of these actions, the WD external goes back to contant transfers at 75-80Mbs. So something is happening where the longer the mbp is running, or after some sort of disk activity, the external WD reverts to a slower transfer speed (closer to FW400). I can't isolate whether it's an issue on the mac os side or the hard drive or the hard drive enclosure because I can make the hard drive go back to optimal speed again merely by unmounting and remounting it. This works consistently until a few hours later when the drive begins to handle transfers at half speed again.
    I run hourly time machine backups to the drive. The time machine backups can't be the culprit because the drive remains running at optimal speed after the backups (verified with aja system test and speed utilities)
    Any possible ideas as to why the drive cuts down to half its optimal transfer rate after a bit of time? I can't figure out the cause of this, and the consistency of the drop leads me to think this is an issue with the power management on the drive since it reverts to full fw800 speed when I umount and remount the drive or restart my computer. Could this be an OSX issue where for some reason the system isn't negotiating the fastest speed?
    Any help appreciated.

    From the SoftRAID manual:
    Fire hubs and disk drives. FireWire hubs are notorious for introducing errors and instability onto the bus.
    Make sure that all of your consumer electronic devices (iSight, cameras, scanners) are connected to a separate FW bus. These devices are not built to the same standards as storage devices and known for introducing errors onto a FW bus.
    Cables. While most cables work fine with a single device, many cables will introduce errors when 2 or more disks are connected to the bus.
    http://www.softraid.com
    http://www.softraid.com/demo.html - manual and demo
    Output can be to any drive or partition. When you lauch iMovie it asks where to store your project.
    I just bought a camera, and curious myself to see if I can take 10 minute clips and use iMovie/iDVD so that it will auto-play. I may end up buying Pogue's "iMovie Missing Manual" or something.
    iMovie Discussions

  • Robocopy transfer speed in log file

    In xp or 2003 robocopy log transfer speed at the end log file. How to get this in w7 or 2008 r2?
    thanks

    Hi, have the same problem .. tested all possible log-options, but still missing the speed-lines on 2k8 R2 Ent. german ... noticed that on a 2k8R2 Std. english server robocopy shows me the speed summary .. have tested with no options and standard options
    (as below) too.
    > Example from 2008 R2 Ent. german (robocopy version 5.1.10.1027 - XP027):
    Optionen: *.* /S /E /COPY:DAT /PURGE /MIR /XJF /XJD /XA:SH /MT:16 /R:0 /W:0
    Insgesamt KopiertšbersprungenKeine šbereinstimmung FEHLER Extras
    Verzeich.: 1 0 1 0 0 0
    Dateien: 9 9 0 0 0 0
    Bytes: 236.352 g 236.352 g 0 0 0 0
    Zeiten: 3:28:12 0:43:31 0:00:00 0:18:26
    Beendet: Tue Dec 04 02:08:18 2012
    > Example from 2008 R2 Std. english (same robo version: 5.1.10.1027 - XP027):
    Options : *.* /S /E /COPY:DAT /PURGE /MIR /XJF /XJD /XA:SH /R:0 /W:0
    Total Copied Skipped Mismatch FAILED Extras
    Dirs : 5165 2 5163 0 0 0
    Files : 60646 72 60574 0 0 0
    Bytes : 32.662 g 3.281 g 29.380 g 0 0 0
    Times : 2:02:00 1:33:04 0:00:00 0:28:56
    Speed : 630988 Bytes/sec.
    Speed : 36.105 MegaBytes/min.
    Ended : Tue Dec 04 03:02:01 2012
    The /MT switch isn't the reason, maybe the language ? .. or can you tell me the exactly switch (example) with german lang pack
    .. need help, thanks, Andy

  • How do I fix the slow transfer speed over USB on my 24" iMac?

    I am backing up/cloning with SuperDuper, and running Lion.  The displayed transfer speed never gets past about 20mb per second.  Painfully slow....  Any suggestions?

    Actually that's pretty good for USB. USB is slow - there is nothing you can do about it. Firewire always has been faster. Personally, I only use external Firewire drives for cloning or backing up. Even then, if it's a fresh clone, it'll take moe than an hour for 160 GB.
    So, I schedule it when I have other things to do and walk away until it's done.

  • Transfer speed and other minor bits

    First off - I love my iPod (40g Colour) and despite my regular bouts of impatience when updated, loading etc I am very happy with the thing. I even bought my wife a shuffle and she likes that for when she's at the gym. I found the software/hardware to be very forgiving.
    However I thought I'd post a query to see if anybody had any ideas on my minor problems.
    1) When we loaded my wife's shuffle for he first time we had problems with the USB 2 convection. PC keeps saying "this item can run faster connect to a USB2 ....." but it is connected to a USB 2 socket. Now everytime I attach either iPod the same warning comes on (except if I connect before starting!). I know its a USB 2 because a new board was fitted a while ago and my 40g will synch and charge on the connection.
    2) Slow transfer. I recently loaded iTunes 5.0 which didn't work for me (see 3). So I wiped it and loaded a copy of 4.9 (thanks to filehippo). Im up and running again but had to re-synch my iPod to iTunes. The tranfer rate is about 500 tracks per hour so to do the 8500 that my iPod takes needs 17 hours. When its done I should'nt need to do it agin for a while but could I speed things up a bit?
    3)Should I go to iTunes 5.0.1? 5.0 loaded on my PC fine without all teh problems that have filled these oages recently but when in 5.0 I connected either iPod (shuffle or 40G I got an error somthing like "Ipod not recognised re-intall iTunes". I know some other people had a similar problem. iTunes 4.9 is working fine but is it safe for me to try 5.0.1 yet?
    Sorry to go on a bit but I know from watching these forums recently there are some very knowledgeable and helpful people out there so I hope you don't mind my request.

    I've had some news - most of it good. I got fed up with the transfer speed so I took my box into my local store to get it checked out. No visible fault on my USB 2.0! I know it happens but they couldn't replicate it so I went home. Plugged all my stuff in except USB devices. Plugged in my iPod and it worked. I was now thinking about power requirements etc. Plugged in my USB modem and the iPod still updated at USB 2.0 speed. Next I tried my wife's shuffle - so far so good. I then plugged everything in and the iPod defaulted back to USB 1.1!
    Tried the shuffle in the spare USB2.0 socket and it worked. Plugged my iPod in and that worked - Now I knew what the problem was - I only have 3 USB 2.0 sockets (5 USB1.1)and two had faulted.
    Next step will be a new card with a fire wire socket! Happy Days - although I still cant get an extension cord to work with my iPod.
    While I was on a roll I took the bull by the horns and loaded iTunes 6.0. Works like a dream although it is a bit slower than 4.9 - probably considerably bigger but it works!!
    My turn to be the lucky one this week!!! Maybe your turn next.

  • Too slow transfer speed for Toshiba 3.0

    Hi there
    i just purchased a toshiba 3.0 external hdd.
    I use windows 7 genuine.
    My pc specs are pretty ok cos i am able to run heavy games like crysis 2.
    The problem is, My external hdd has slow transfer rates. This problem i started facing aroung 3 months ago. My hdd is out of warranty.
    My USB ports are ok and i connect it to primary port.
    The transfer speeds are just around 10MBPS and sometimes it drops to KBPS!!!!
    Also, it does not copy some files and gives error "Failed to read from source disk" or something like that.
    There is no Virus in it, I have enabled write-cache. I have defragged it.
    My OS is fine and also, i checked it on other OSes.
    Also, i have tried using "check disk for errors" with proper procedure but it hangs somewhere in the middle after it processes 500000 sectors or so.
    I got my HDD from my cousin as he no more used PC and without any cover so i dont have any idea of model (although if there is any utility to find model then please notify me).
    Also, it worked fine during then. Me and my cousin are from India only.
    How can i fix this issue?
    Please help me.
    Message was edited by: Jaskaran
    null

    Please dont understand me wrong but if the case is urgent call Toshiba hotline in your country or contact nearest Toshiba service provider.
    This is user-to-user forum only.

  • Slow fileshare transfer speeds with Lion Server

    I'm running Lion Server on a Mac Mini and using SMB to share files between the server and both Windows and Mac machines. I can't figure out why I can only get 2 Mb/s transfer speeds between the server and the other machines. I'm quite certain I'm not limited by my network and the disk write speeds clearly exceed 2 Mb/s. Any suggestions for boosting this speed or is this an actual limit of SMB or Lion Server?

    Have a similar issue on a Macbook Pro mi 2010 : since the 10.7.3 update, Samba file sharing (to access a FreeBsd server over the LAN) is extremely slow. I mean I can't work normally since the update (3 weeks).
    I've reported the bug to Apple. I think it is a bug limited to some machine version (because other mac in the office do not have the issue)

  • What transfer speed can I expect via wired ethernet?

    3 iMac's wired to an AirPort Extreme....what transfer speeds should I expect?  I'm only getting 40-60MBps  IMac to IMac via Ethernet provides up to 70MBps. I am wanting to get a Thunderbolt Drive but worry that while the iMac that the Thunderbolt HD is plugged into will get much faster transfer rates, when access the Thunderbolt HD from another iMac on the network I will still be stuck with the 40-60MBps rate.  Surely there is a way to get faster network speeds than 40-60MBps?

    Tesserax,   You are are correct, I was just hoping that there was some way to get better performance out of my network speed so that the $1500 Thunderbolt purchase was worth it.  What I now plan to do is get the $999 model R4 4-1TB just so I can have one since the iMac that the Thunderbolt HD will be plugged in to will be doing the most editing so in some ways it does help me....just not as much as I was hoping it would.  I can at least take my old FireWire HD and plug it into my iMac and use that for FCPX projects that are for more personal than business use. 
    Having only 1 HD that 3 iMac's can use to edit images from has really helped me out with keeping everything in order.
    If you can daisy chain the Thunderbolt Drives I have to wonder why they didn't have it so 2 iMac's couldn't connect to 1 HD.  With 2 Thunderbolt ports on the iMac you would think you could connect iMacs together using 1 port on each then have the other port for like HD's, extra screens, etc You know what I mean?  If you are going to make this super fast port/cable you might as well make it to connect iMacs as well.

  • Questionable transfer speed of Zen Stone Plus over

    I'm going to make this short and sweet. Ever since I purchased this (4 days ago), every single transfer I've made via the 0cm long usb cable provided with it has been rated rather low.
    USB 2.0 has a maximum potential TX speed of 60MBps, however with the miniscule cable I was provided, TX speed is no faster than .MB
    ps.
    I did my first TX before firmware upgrade and it was rated at .MBps, I then not long ago upgraded the firmware, but no change.
    Any reason why this is such?
    Btw I'm on Vista Ultimate 64bit, and the firmware version I upgraded to is .03.0
    Other than this, It's all fine (except the stopwatch has choppy framing when used and while playing music at the same time, but that's another matter).Message Edited by Capt-Irrelevant on 09-07-200708:52 PM

    hi there!
    ih have exactly the same problem! (I also have this choppy stopwatch only while listening to a song) I think my Player is a bit slower: for ,3GB i need 40minutes....
    I received my player today and searched hours in the web for a solution. I tried different ways of transfering the data, nothing worked. Every other USB2 device (Stick, HDD, Mini HDD...) works perfect!
    I have a Kubuntu Li've-Boot CD (u dont have to install this OS it only boots from CD) and while using this OS i have the full transfer-speed in both directions. In Windows XP SP2 i only have the full speed while copying data from the player to my disk.
    Well.... i think it's a driver/config issue cause thats the only thing that have change in the Unix system but i cant figure out what exactly cause this problem: i used different ports, changed the energy options in windows, updated chipset driver, reinstalled player, unplugged other devices. i think the players ressources are used by something else or another thing already use something that the player needs.
    Tommorow i will test the player on other PCs and Unix systems and with an USB-hub.
    My Mainboard: Asus A8N-SLI (AMD CPU and nforce4 Chipset) + WinXP Porf SP2
    [the rest of my system isn't important i think]Message Edited by Buttermilch on 0-23-200703:38 PM

  • Checking Transfer Speed

    I am using a Macpro to synch files with an AppleTV and to share files with my Macbook Pro and audio with an Airport Express. Where can I check the transfer speed when I send files from my Macbook Pro to my Macpro or the other way around or the transfer speed to the AppleTV or the Airport Express?
    Thanks.

    I would sugget you try out menu meters from 'Raging Menace'
    menu meters
    It will show you your network throughput in the menu bar once you enable it in the menu meters preferences.

  • WRT350N - Transfer speed via Storage link

    I have always been curious what the transfer speed others get while using
    a USB 2.0 hard drives on their WRT350N.
    Obviously there is going to be a drop in transfer speed using storage link but 2-3 Megabyte seems slower then I would expect.   I don't thnk I have ever seen much about 3MB. 
    I see the same performance wirelessly (connected at 270mb) and hardwired into the gig ethernet port.
    Just wanted to get some other peoples results.
    Message Edited by GAH1068 on 01-17-2008 02:04 PM

    It was on both systems. However, I did get it working. Not the way I liked, but it works. What I expected to see was the device hung off the network. That is like another computer. This *is* happening, but where I was confused was the access to it. On other shared resources I can open it at will with no special access rights needed. I'm talking about printers and files on other computers on the network. It turned out to access the Storage Link I had to actually provide a USER ID and PASSWORD before I could use it. Why I couldn't get access before was I had HTTP:\\192.168.1.1 already open in my browser so any other attempts via the web browser used the existing connection. Not until I saw a forum message that said use START=>RUN and enter the IP address or UNC name was I able to connect to it. Since I now know this, a simple bat file with some NET USE's should fix the problem of getting access. Compounding my problem is how I've chosen to manage the network and shares. I use Network Magic, and it can NOT see the Storage Link at all. Anyway, I now know how to access the Storage Link. I was using a Flash drive for testing. I'll next put a USB External drive on and try that out. My ultimate try will be a USB hub and 4 external drives and hopefully I'll have access to all 4 drives to all computers. Irv S.
    Thanks,
    Irv S.

  • Transfer speed of USB vs Gigaport attached drive WRT610N

    I know this is a loaded question but here goes:  Assumptions:  eqivalent drive specs but one is connected to the USB port of a 610N and the other is connected to the gigaport of the 610N which drive should have the fastest throughput and approximately by what % margin?
    The reason that I am asking this question is that I did a backup of about 40GB to a Seagate drive attached to the USB port and it TOOK FOR EVER!!!!!!!!!!!!!!
    I have a gig capable drive on order and am praying that the performance will be much better than the USB drive.

    What is the speed you are getting from the USB Port..?
    I think you need to make some changes on your Wireless router, so the Download and upload speed improves.
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 Leave username blank & in password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab -
    This settings are for 2.4GHz.
    -Here select manual configuration...Wireless Network mode should be mixed...
    -Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WEP, Encryption should be 64 bits.Leave the passphrase blank, don't type in anything...
    Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
    Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect, and after this try Downloading and Uploading on your Storage Drive and check whats the speed you are getting
    Same goes for your 5GHz Wireless Network.
    Wireless Network mode should be mixed...
    -Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network.
    Set the Radio Band to Wide-40MHz and change the Wide channel to159 and Standard Channel to 161-5.805GHz...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
    NOTE : Passphrase should be more that 8 characters...
    Try and see how is the data transfer speed.

Maybe you are looking for

  • Text fields in Print Module

    I was really hoping to see the ability to add text fields in the Print module.  In my work, I frequently need to add captions or titles to the prints.  At the moment, I have to round trip to Photoshop to make this happen.  I also make folios (see Bro

  • Multiple Bluetooth Usage issues

    I'm finding Stereo Bluetooth very unreliable and at some points rather irritating. My issues are related to playing music using iTunes to my car stereo. Connection: (A) When I stop my car, iTunes does not detect that the Bluetooth link dropped. It ke

  • 3 sap(integrate legacy with XI - Inbound and outbound proxy

    We are planning to  have 3 sap (SRM,BI  and CRM) systems  to integrate with legacy systems . All the systems have inbound  as well as outbound proxy calls. I have few questions: 1.What are the different steps to be configured to make this scenario wo

  • Cloud apps have reverted to trial

    It seems that at around the time of my latest Creative Cloud update that all of my loaded apps have reverted back to trial status. Any ideas how to get rid of that and get my real apps back? Arlen P.

  • HT4623 New iPhone 5 with wifi issues - help!

    Anyone know why the wifi does not work on the brand new iPhone 5 with apple network?