Transfering star rating from a low res folder to a high res folder in bridge?

I am wondering if anyone has ever needed to do this or am i the only one?
I have a folder of low res images that have been rated with stars in bridge.  I'd like to move these star ratings to another folder of CR2 files that are the exact same file names except they are CR2 and not JPEG's.
Any way to do this?
At the end of the day i have about 1500 images that have been "selected" and i want to pull these same high res images out of the 4000+ images in the high res folder.  Any help you can give would be great.
Thanks a bunch.
incase you are wondering why not just rate the high res...Shooting wirelessly to laptop, my client is making the low res images as their selects and then later i'll deliver only these as high res.
Thanks again!

I am wondering if anyone has ever needed to do this or am i the only one?
I recognize this question but I'm afraid that was about many other situations...
Maybe you can ask in the Adobe Bridge Scripting forum if someone has a solution for this but in my experience the time looking or learning for a solution exceeds the time then just bite the bullet and start picking them manual (and don't forget to charge the client for the hours, but you are right, it is better to have a simple solution and yet still charge hours)
I would start to select the rated files in Bridge and add a clear visible label to all the files and then drop (or copy) the lot in the HiRes folder,
Select sort order by filename (or even try date created) and just start clicking on the files next to the labeled jpeg files with holding down cmd key (on a Mac, don't know the windows but this key keeps adding only the clicked files to a selection. Every 10 or 20 files hit a rating or labeling key so you can filter those files later on in the process to only keep the wanted HiRes files in view.
When done choose the filer panel to view only CR2 and label / rating and you have the wanted selection.
Yes it takes a bit time but so does finding out a solution. If you have to deal with it more often you better try the scripting option immediately.

Similar Messages

  • What is the mAh rating for the Oct. 2005 Rev 15" High Res, X2DVD PowerBook?

    What is the mAh rating for the Oct. 2005 Rev 15" High Res, X2DVD PowerBook? Is it 4400mAh?

    Yes, roughly.

  • T400 boots in low res, then changes to high res once windows boots

    when i boot windows vista it boots into a low resolution, and makes everything bigger. Once windows boots up the screen flickers and it changes to a higher resolution. how do I make it stay in the higher resolution?
    T400
    Intel® Core™2 Duo T9400 2.53 GHz__Windows 7 Professional__3GB Memory__160GB, 7200RPM Hard Drive__14.1” WXGA+TFT-CFL__ATI Mobility Radeon™ HD 3470--

      This appears to be the solution (at least, it is for me). I can apply my changes to the low-resolution proxy by saving the mesh and then applying that same mesh to the high-resolution image. The large brush sizes (in comparison to the image resolution)  that I am afforded in the low-res version are brought across to the high-res because the changes are not applied as brush strokes, but rather as alterations to an overall mesh. the changes to the mesh are what is transferred when I export and import.
      Applying the mesh is pretty slow, and it requires a few tweaks at the high-res level, but it gets me 95% of the way there. I think this is workable.
    To recap - here are the steps:
    1) I make a low-resolution version of the image (like 1200px wide)
    2) I make my edits to the image using Liquify
    3) before committing the Liquify changes, I "Save Mesh" in the Liquify tool
    4) I open my high-resolution image
    5) I use liquify, but I do not use any brushes, but in stead load my saved mesh from the low-res
    6) profit.
    thanks for the help folks!
    --------------S

  • Can you edit in Low Res then conform to High Res

    A producer told me she wanted to edit in Low Res, then do an online to replace the sequence with High Res media.  I haven't done this since I started using Final Cut:  I've edited in High Res all along. 
    Is it necessary?  And how would it be done?  Many thanks for any knowledge you can share.

    ProRes 422 is a mastering codec. It's is a format that you do convert many camera formats into. But it is a full resolution mastering codec. Tutorial?  No...but the manual:
    http://documentation.apple.com/en/finalcutpro/usermanual/#chapter=2%26section=2% 26hash=apple_ref:doc:uid:TempBookID-ReplacedWhenAssociatingWithMessierRevision-4 4032FMT-1008869
    http://documentation.apple.com/en/finalcutpro/usermanual/#chapter=C%26section=12 %26hash=apple_ref:doc:uid:TempBookID-ReplacedWhenAssociatingWithMessierRevision- 44035VDF-1013573
    https://documentation.apple.com/en/finalcutpro/professionalformatsandworkflows/i ndex.html#chapter=10%26section=3%26tasks=true
    How did he deal with all that video? Well, he had HUNDREDS of hours...adding up to 54TB. So he had to work on the project in sections, with 12TB loaded at a time.  It was tricky, but far less tricky than offline/online would have been. Less time consuming too...all the time to convert ALL of that footage to offline resolution, long time.
    You're iMac is plenty powerful for ProRes. My 7 year old MacPro could deal with it fine, and your machine is more powerful.

  • Transferring "My Rating" from one computer to another

    Anyone know how to transfer previously established ratings from one computer to another? Is there a file that contains this data? Thx.

    Yeah there is a file that contants this data. It is located in the iTunes Music folder. There is a file that have an exension of .xml. Transfer that to your new computer on the desktop. Go to iTunes and File>Import. Locate that file in your desktop and select it.

  • Can you transfer your star ratings from an iPod classic back to itunes?

    Hi
    Is it possible to get your star rating from your ipod and use the data to recreated your top rated in iTunes?
    Any help would be much appreciated.

    See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    B-rock

  • Star Ratings -- From data source

    Hi,
    I have imported a data source to my page and it includes a number which I'd like to convert to stars (graphics). Is there a simple script that I can use to take the number being imported and convert it to a graphic? If the rating is a 2 I'd like to have two stars, etc ...
    Thanks!

    You could probably go 3 ways. Run a script after the merge, this would be the best.
    For each page, get the number/integer of the star rating from the text box. Then have the script draw X number of image frames on the page where ever the rating needs to be, like 3 or 4 small square boxes. You'd have to manually determine the placement of box 1, box 2 etc. Then place a star graphic in each box.
    Or you could also have the stars drawn as a polygon shape directly in InDesign, drawn as many times as needed.
    Or draw just one box, long rectangle, and then have 5 images of star ratings, 1 star, 2 star etc. Based on the number, place the file name that begins with that number (ie "1-star.jpg").

  • Replace low res footage with high res?

    Can anyone tell me or is there a tutorial that shows how to take low res preview footage and replace it with the high res files for final output? In my case the high res file names have slightly different numbers. Is there a way to just change them to match the preview footage and be done? Doesn't seem to work for me. Tried relinking with no luck. I get: "Incompatible file. The original file and new file have no shared media range.Relinked files must have the same media type, same frame rate, and similar audio channels as the original files, and must be long enough to cover all the clips that reference the files." Seems like this shoould be a slam dunk!

    I was using archival footage and only had low res previews to work with. Now that the project is approved I can buy the  actual footage and complete for output. Is this different from replacing watermaked low stock footage with unmarked high res? Should I have set up the time stamped low res as proxie? Please don't tell me I'm back to square one.....

  • Question to Transferring Global Settings from Source Systems

    1) When we do this steps, we found the following information as follows, so the question is that which fields that we should maintain?
    BW User ALE
    Debugging User
    BEx order number
    Releasest. hier
    Monitor initial
    Last IDoc no.
    Last IS-Nr.
    XPRA executed
    Lock Mangr Logs
    MD: Sing. Rec. Inst
    RFC BI Accelerator
    2) If we maintain some of fields should we do something before, and how? e.g. we know BW user ALE = aleremote, so should we maintain aleremote user using SU01 both in R/3 and BW before we do Transferring Global Settings from Source Systems
    Thanks for the answer.

    Is anyone know how to setting Transferring Global Settings from Source Systems, your answer will be high appreciate.

  • Updating from a lower SKU to a higher SKU; do you uninstall?

    At work I've got VS 2013 Professional. I might be going to 2013 Ultimate (hopefully). Assuming I do what's the correct procedure for upgrading from an lower VS SKU to a higher VS SKU? Should I uninstall the Professional before installing Ultimate? Or will
    installing Ultimate simply overwrite Professional?
    Rod

    I believe you'll have to uninstall Professional, then install Ultimate.
    This is because the VS installer doesn't have an upgrade option, and you cannot have two "full" VS 2013 editions on the same system.
    I've never done this myself, so if I need to be corrected, I hope someone else will jump in.

  • Why does "Print Booklet" from Indesign CS5.5 only create low res pdf? How do I get High Res for Offs

    Long time ID user in Agency. Created a simple 4 page brochure in CS5.5 ID. Facing pages for cust size 11x17 half fold document.
    Generating the pdf for Press and HQ Print renders a nice high res document, but the print booklet feature only produces a skinny low res version. Tried to mess with the printer settings, but the result is the same with a skinny low res document.
    I didn't want to recreate the brochure as a two page manually imposed as I like the option of being able to add more pages in increments of four of course. Plus it's just silly to do that when ID is supposed to handle it for me.
    I worked around it this time by printing to .ps output then distilling, and then splitting the document so printer could have a "front" and "back" 11x17. But this seems kludged big time. This has to be a bug unless I am missing something.

    You probably never changed the default settings in the PDF printer properties. In the print booklet dialog, click the Print Settings button, then the Setup button at the bottom of the Print Dialog that pops up, choose the PDF printer and click on Preferences. Reset the default reset the default settings to the ones you really want to use, or reset them in Windows... Control Panel > Devices and Printers... Double-click the PDF printer, then from the print queue dialog, Printer > Properties... General tab and clcik the Preferences button.

  • I have transferred my pictures from a PC to iPhoto but some have remained in a pictures folder. How can I move them to pictures?

    i have transferred my pictures from a PC to iPhoto but some have remained in a pictures folder. How can I move them to pictures?

    what is WP files?
    You want to always use iPhoto with a default referenced library (the preference to copy imported item to the iPhoto library is checked) ad then delete the source photos
    LN

  • Is it possible to create a script to produce a high res and low res pdf and jpeg from Indesign at the same time

    Hi, I'm just wondering if there is a way to automate a long process I have to do to create assets for my job.
    I have a single page InDesign 6 file which I have to output three ways:
    A low res pdf without bleed or trims
    A high res pdf with bleed and trims
    A low res jpeg downsized to 2% of original size.
    If anyone knows if this is possible I'd love to hear from you.
    Thanks in advance

    Automation requires creating your own IDML script for output. Scroll down on this page to the section on Scripting resources. The text is a bit confusing. It says InDesign CS5 Scripting resources, but then the paragraph for that section says the PDF files are for CS6. I haven't read through these, I just found them by searching for "indesign automation". It does say in part that is can be used for preparing files for printing, so once you figure it out, it should be a single click option to do all three steps.
    You can do them now with the menus you have, assuming you also have Acrobat Pro installed. With any document open, choose File > Adobe PDF Presets, and choose either from the prebuilt defaults, or create your own in the Distiller. However, I don't see a way in the Distiller settings to choose whether or not to include bleed and marks, so I'm not really sure how you'd have them on for one and not the other. As far as JPEG output, that can be chosen under Export. You get a choice to set a resolution and JPEG quality level, but not a size, so the output will be the dimensions of the document.

  • I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

    I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

    Before you connect any device to a new library go to the Devices tab of the the preferences panel via Edit > Preferences (Windows) or iTunes > Preferences (Mac) and ensure the box next to Prevent iPods, iPhones, and iPads from syncing automatically is ticked. You can now safely connect the device to your computer without the danger of media being automatically deleted or overwritten.
    To get all your content off your connect your iPad to your new computer.
    Then use a 3rd party piece of software to transfer your content
    I have found Senuti useful but there are others listed in the article I linked to in a previous post.
    https://discussions.apple.com/docs/DOC-3991
    That will let you transfer your non purchased content
    For Purchased content log in to iTunes on the new computer
    In Itunes Store click on Purchased under the Quick Links section on the right.
    Download any music by clicking on the cloud button

  • Star Rating bar does not appear with images imported from file

    Using Elements 11, cannot get the Star Rating bar to appear under images imported from file, although the intro to the program shows this as happening automatically.
    Hope this goes through, as I have also created an account, but the question does not seem to be get a post.
    Help!

    Have you enabled Organizer to show details? You can enable show details by checking View > Detail is not already checked

Maybe you are looking for