Transferring data from one iPad to another?

I realize that there's an easy way to do this, for most users. http://www.imore.com/daily-tip-transfer-data-ipad-2  But I have a problem.
I realize that the iPad will transfer all my applications and paid documents by using the iTunes Backup feature. But what about items I haven't purchased, like self-authored PDFs and videos?

You can backup your old iPad either to iCloud or iTunes, and then resotre that backup to the new iPad.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766

Similar Messages

  • How do I transfer the data from one iPad to another

    How do I transfer all of the data from one ipad to another one?

    The best way IMO is to sync each iPad with your computer. Having all your stuff backed up on a computer is a good idea anyway. Just read how many folks here are trying to recover lost stuff that could easily be copied back from either backup or iTunes on the computer.
    Sync both iPads to the computer. Transfer all photos to the same computer. Then sync again selecting which items you want on each iPad.

  • Can you transfer data from one iPad to another iPad

    Can you transfer data, books and music from one iPad to another .

    You can use iCloud to sync your books and music bought in the iTunes Store, but for anything that you didn't purchased in iTunes Store you must use iTunes

  • BADI for transfering data from one modal to another modal within single appset

    Hallo Experts,
    My Business Requirement is Transfer of data from one modal to another in same environment and did this taking reference from below document.(How to custom badi for replicating destination app)
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e04b5d24-085f-2c10-d5a2-c1153a9f9346?QuickLink=index&…
    Document contains TR for implementing BADI, but this document supports bpc version 7.0 and we are using is bpc 10.0.
    So i make all compatible changes in BADI implementation and activate it. Now i am testing using transaction UJKT using following script.
    and the result is records successfully written back to application MIS, but when i check data is not moved to target application MIS.
    I am facing stuck situation in my project work. Please Suggest. Hope for positive reply.
    Script:
    *XDIM_MEMBERSET WM_ACCOUNT = WM_041,
    *XDIM_MEMBERSET WM_UOM_02 = UOM_004
    *XDIM_MEMBERSET WM_UD_2 = WM_07
    *XDIM_MEMBERSET WD_EXT_MAT_GRP =CHALK-PH-I,CHALK-PH-II,CHAVN-PH-I,CHAVN-PH-II,NASHIK-WM,RAJASTHAN-WM,TAMILNADU-WM
    *XDIM_MEMBERSET CATEGORY= Plan
    *XDIM_MEMBERSET AUDITTRAIL=Input
    *XDIM_MEMBERSET P_ENTITY = SIL
    *XDIM_MEMBERSET RPTCURRENCY = LC
    *START_BADI DAPP
       DESTINATION_APP ="MIS"
       RENAME_DIM ="WD_EXT_MAT_GRP= PRODUCT"
       ADD_DIM ="PLANT=NO_PLANT","MIS_ACCOUNTS=CAIN0058040008","COST_CENTER=NO_COST_CENTER","FLOW=Opening","UOM=AMT","CUSTOMER_SALES_2=NO_CUSTOMER","CATEGORY=Plan","AUDITTRAIL=Input"             
       DEBUG = ON
       WRITE = OFF
       QUERY = ON
    *END_BADI
    Please find attached result.
    Regards,
    Dipesh Mudras.

    Hello,
    Here is the manual to copy data between apps (it works with BPC NW75):
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0480970-894f-2d10-f9a5-d4b1160be203?quicklink=index&overridelayout=true
    It works me, but now I need to modify the Script Logic to make that a "property" from the origin dimension has to be copied to the destination dimension as "id", like follow:
    //*XDIM_MEMBERSET CATEGORY = %CATEGORY_SET%
    //*XDIM_MEMBERSET TIME = %TIME_SET%
    //*XDIM_MEMBERSET ENTITY = %ENTITY_SET%
    //*XDIM_MEMBERSET RPTCURRENCY =  %RPTCURRENCY_SET%
    *START_BADI FiltroPD
         WRITE = OFF
         APPL = $APPLICATION$
         ADD_DIM = "ORIGEN = APPVENTAS"
         ADD_DIM ="O_COSTE = no_input"
         ADD_DIM="CECO = no_input"
         RENAME_DIM="P_ACCT = RATIOS.P_ACCT "
    *END_BADI

  • Moving apps, their data from one ipad to another AND changing/deleting at the same time!

    Hi,
    I would like to get ready for my new iPad. Over time I have accumalated a LOT of Apps which I don't use or  would like to organize differently.
    Others (games or internal documents/settings) I would like to leave intact. Is there a way to choose what to import and maybe already pre-sort?
    I know of the restore feature from a specific backup (used that in the past) that DOES keep the data intact but does not allow for my organizing/spring cleaning scenario...
    I was thinking directly of the new Apple configurator tool. I could import my iPad profile, and based on that choose apps to keep (and their data) or delete in a first step. Even better would be if I could then group them in folders or screens BEFORE I sync this new profile to my new iPad.
    This would also be ideal to manage backups and different setups for family members when we do the family shuffle.. I upgrade, hand my old device to my better half, she hands her to X family member etc., etc.
    My issue is that the help menu of the configurator toll indicates it works only for volume bought applications. Is this right? Why the restriction?
    Main concern of course is not installing the application on a specific device BUT to copy the app (AND internal data) exactly to another one!
    I'm surprised that Apple hasn't adressed these issues better but maybe they did with this new tool (or another way) and I just don't see/understand it.
    Thanks for any and all input,
    Philly

    Thanks Rudegar
    My problem is a little different. I would like to selectively sync apps and maybe change/add/delete folders and app screens.
    I know how to "clone/restore" the iPad. I was hoping that I could maybe use the Apple confugurator for this purpose and customize my apps based on an import from the old iPad. As such weeding out old apps and not having to use the cumbersome iTunes method but at the same time protecting my backed up data.
    It could also simplify data transfer if I could create multiple profiles/people from which I can choose who to sync/transfer to a specific iDevice.
    But thanks for taking your time and providing a solution to transfer all files from one device to another.
    Philly

  • Help transferring data from one account to another

    I bought my computer in August 2008 and had previously had an iBook. When transferring my data from my old computer to the new one, I guess I did it wrong so instead of it transferring all to the same place it created two accounts.
    Is there way to transfer my music/pics etc to my main account?
    Also, my iphone is backed up the other account because thats where all my music is, is there a way to also keep all this data once I am using only the main account?

    When you use Migraine Assistant, it transfers the account of the older machine to the newer because the users name is involved in everything, like iTunes playlists etc.,
    Since to run Migraine Assistant you need to have gone through setup on the Mac and created the main Admin account, when you Migrate, you transfer the other account so you wind up with two accounts on the new machine.
    All you have to do is log into the Admin account of the first user you created, then change the acount status of the Migrained account to Admin and reboot, check it out well, then delete the first Admin account at your own leaisure. However it's best to leave two accounts on the machine, just in case your locked out for some reason.
    If you rather transfer your files from one account to another use the Shared Drop Box
    If you have three accounts on the machine (original admin and two migrained migrateda accounts), you'll just have to monkey around and clean up the mess.

  • Fatal error while transferring data from one bb to another

    I was trying to transfer data from one bb to a different bb using the bb desktop manager tool.  It collected all the data from the first bb fine and then while transferring data to the new one it said a fatal error occured to try again.  That bb will not even turn on now.  No white screen or anything.  Its like there is no operating system.  I don't know what to do.  I tried to connect it and just update the software but that isnt working either.  Says it is not responding during initialization! I think I killed it.... any ideas what to do???

    You can try to reload the OS in one of the following ways
    http://www.blackberry.com/btsc/KB03485
    http://blackberryfaq.net/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • Transferring data from one table to another table using a Keycolumn using SSIS row by row dynamically

    Hi All,
    I have a Store Procedure(SP) which has a output variable name "AcivityID" which is the key column. In this SP, transformation  of data is done from one table to insert data into other table. I have to execute the SP and insert row by row data
    using the output variable "ActivityID"  whose value will keep on changing. How can I do it?
    Thanks,
    Kallu

    Value changing on a row by row basis? Not quite sure what you mean, but it seems that you want to use the results of an insert into one table as input for another. If so then SSIS is not needed, inside the stored proc use the SQL that will do that and for
    all records as
    INSERT A INTO dbo.table1
    OUTPUT INSERTED.A INTO MyTable;
    Arthur My Blog

  • How to transfer SOME apps + app data from one iPad to another

    I have an iPad1 that has tons of apps on it (I call it my app graveyard).
    I have an iPad2 that has my primary apps and this is the iPad that I use on a daily basis.
    I want to move an App and the Saved Data from the iPad1 to the iPad2. How do I do this?
    Again, I don't want to restore everything... just a couple of Apps + their SAVED data from my iPad1 to my iPad2.
    Any help would be greatly appreciated!

    When you restore from a backup - the process is an "all or nothing" deal. You restore all app data and settings. You cannot select just one set of app data to restore.
    You can download the one app only to the other iPad but you cannot restore the data from just one app. It's just not possible to do.

  • Performance issue while transferring data from one itab to another itab

    hi experts,
    i have stored all the general material details in one internal table and description, valuation details of the meterial is stored in another internal table which is of standard table. now i need to tranfer all the data from these two internal tables into one final internal table but it is taking lot of time as it has to transfer lacs of data.
    i have declared the output table as shown below
    DATA:
      t_output TYPE standard TABLE
               OF type_output
               INITIAL SIZE 0
               WITH HEADER LINE.
    (according to the standard i have to declare like this and the two internal tables are declared similar to the above one)
    could somebody suggest me how shall I procced through this...
    thanks in advance....
    ragerds,
    Deepu

    Have a look at the following article which you may find useful:
      <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40729734-3668-2910-deba-fa0e95e2c541">Improving performance in nested loops</a>
    good luck, damian

  • Help transferring data from one computer to another

    My aunt uses Palm Desktop as her calendar but does not have a palm pda or phone.
    Her computer at home recently died but she was able to get the palm installation folder from the old hard drive.
    She has Palm Desktop installed at work but the information in it is totally different than what she had at home.  She wants to import the data from her home installation into the installation she has at work.
    It used to be really easy to transfer settings from one Palm installation to another.  Side note: My wife has a Palm Treo 650 and I recently formatted her computer and tried to copy her old installation folder from a backup to the new install directory.  Well, it didn't work like it used to.  I don't know if the software has changed or what.  But, she didn't get everything.  It's been a while, I can't remember if she didn't get ANY of it, or just some.  I remember at one point it only showed her contacts for A-M...N-Z were just plain gone.  Really strange.
    But, back on topic, I tried creating a new user in Palm Desktop and then copy the files under her old username folder to the new username folder in the Palm install directory.  But, Palm Desktop doesn't show anything for the new username.
    How should I go about doing this for her?
    Thanks!
    Post relates to: Treo 650 (Alltel)

    The user on her home install was also Trisha.  So, I created a new user on the work computer, "Trisha2".  Then I closed Palm and copied the contents of her backed-up Trisha user folder from home into the new Trisha2 folder on the work install.  Then I started Palm and flipped to the Trisha2 user.  Nothing showed up.  So, I've pretty much done the exact process from the link already.  Which is exactly the way I thought it should work and have had it work in the past.
    I'll try it again without using numbers in the username and see what happens.
    Thanks!
    Post relates to: Treo 650 (Alltel)

  • Transferring data from one schem to another

    Hi:
    I am looking for an efficient way to transfer all the records from one table in a certain schema to it's identical counterpart in another schema. Both schemas are in the same Instance. The tables are "identical" in that they have the same columns as metadata. Any suggestions?
    I would like this to be as quick a transfer as possible, so, if it would speed things up, I would like to consider deferring update of indexes of the receiving table until after the records have moved. Is that sort of thing possible? A less attractive approach would be to drop all the indexes, then transfer the records, then recreate all the indexes.
    The receiving table will be truncated just prior to the transfer, so perhaps all forms of journaling/undo can be shut off (no need to recover if the transfer failed)
    Thanks for any help

    You could certainly drop and recreate the indexes as another part of the answer, but the fastest transfer would be a direct-path insert:
    insert /*+ append */ into target
      select * from source;

  • Transferring data from one DB to another DB

    Hi Experts,
    In production database 30 tables are there in different schemas.
    In some tables data is existed for 5 years
    in some tables data is existed 8 years
    in some tables data is existed for 6 years.
    And all these tables are having billions and millions of records.
    Let us assume the tables in the production database are
    Table1 -- 8 years data -- No. Of Records 3538969000
    Table2 -- 6 years data -- No. Of Records  592844435
    Table3 -- 3 years data -- No. Of Records   33224993
    Table4 -- 4 years data -- No. Of Records   52361756
    Table5 -- 5 years data -- No. Of Records    8948567
    Table15 -- 6 years data -- No. Of Records 308476987Now I want to trnasfer these 15 tables data to test database.
    Based on the following conditions.
    For Table1 I want to transfer 6 years data to test database, keeep 2 years data in production
    and delete all 6 years data from production databse.
    For Table2 I want to transfer 4 years data to test database, keeep 2 years data in production
    and delete all 4 years data from production databse.
    For Table3 I want to transfer 2 years data to test database keeep 1 years data in production
    and delete all 2 years data from production databse.This will be done periodically.
    I.e. suppose if we run the script now and transfer the requested data to test database,
    again after one year the data got increased in production then again we have to run the
    script and transfer data to test database based on some conditions,so it should work for
    long time.
    Please help me what is the good and fast process to transfer the data.
    Thanks in advance.

    Thanks for your information.
    Hi ,
    To make the process dynamic why we want to make it dynamic in future any tables needs to e archived
    only one script should execute.
    I have created the below control table to pass ID, TABLE_NAME, ARCHIVE_TABLE_NAME, WHERE_CONDITION dynamically.
    ID  TABLE_NAME ARCHIVE_TABLE_NAME  WHERE_CONDITION
    1   Table1     archive_table1       created_date< MONTHS_BETWEEN(SYSDATE,-24)
    1   Table2     archive_table2    Accepted_date< MONTHS_BETWEEN(SYSDATE,-24)
    1   Table3     archive_table3    last_proposal_date< MONTHS_BETWEEN(SYSDATE,-24)
    1   Table4     archive_table4    lat_modified_date< MONTHS_BETWEEN(SYSDATE,-24)
    2   Table5     archive_table5       changed_date< MONTHS_BETWEEN(SYSDATE,-24)
    2   Table6     archive_table6    received_date< MONTHS_BETWEEN(SYSDATE,-24)
    3   Table7     archive_table7       send_date< MONTHS_BETWEEN(SYSDATE,-24)
    3   Table8     archive_table8       exact_date< MONTHS_BETWEEN(SYSDATE,-24)I want to pass ID from the JOB then the procedure should execute for all the tables with respective ID.
    this is my job
    DECLARE
      X NUMBER;
    BEGIN
      SYS.DBMS_JOB.SUBMIT
      ( job       => X
       ,what      => 'APPS.myprocedure(1);'
       ,next_date => to_date('24/12/2012 00:00:00','dd/mm/yyyy hh24:mi:ss')
       ,interval  => 'TRUNC(SYSDATE+1)'
       ,no_parse  => FALSE
      SYS.DBMS_OUTPUT.PUT_LINE('Job Number is: ' || to_char(x));
    COMMIT;
    END;
    For example if I pass the ID as '1' through job,then the procedure should execute for
    1   Table1     archive_table1       created_date< MONTHS_BETWEEN(SYSDATE,-24)
    1   Table2     archive_table2    Accepted_date< MONTHS_BETWEEN(SYSDATE,-24)
    1   Table3     archive_table3    last_proposal_date< MONTHS_BETWEEN(SYSDATE,-24)
    INSERT INTO archive_table1
    (SELECT * FROM Table1 WHERE created_date< MONTHS_BETWEEN(SYSDATE,-24));
    DELETE FROM Table1 WHERE created_date< MONTHS_BETWEEN(SYSDATE,-24));
    INSERT INTO archive_table2
    (SELECT * FROM Table2 WHERE created_date< MONTHS_BETWEEN(SYSDATE,-24));
    DELETE FROM Table2 WHERE created_date< MONTHS_BETWEEN(SYSDATE,-24));
    INSERT INTO archive_table3
    (SELECT * FROM Table3 WHERE created_date< MONTHS_BETWEEN(SYSDATE,-24));
    DELETE FROM Table3 WHERE created_date< MONTHS_BETWEEN(SYSDATE,-24));If I pass ID as 2 through job,then the procedure should execute for respective table names and where conditions.
    I have written the following code but it's not giving expected result.
    CREATE OR REPLACE PROCEDURE myprocedure (P_ID IN NUMBER)
    IS
       CURSOR C IS
          SELECT id, table_name,archive_table_name,where_condition FROM apps_global.control_ram WHERE id=p_id
          ORDER BY id,table_name;
    BEGIN
       FOR I IN C
       LOOP
    EXECUTE IMMEDIATE 'INSERT INTO '|| I.ARCHIVE_TABLE_NAME || '
    (SELECT * FROM '|| I.TABLE_NAME ||' WHERE '||I.WHERE_CONDITION||)';
    EXECUTE IMMEDIATE 'DELETE FROM ' ||I.TABLE_NAME|| ' WHERE '||I.WHERE_CONDITION||' ;
       END LOOP;
    END;
    END myprocedure;Please help me.
    Thanks in advance.

  • Transfering Data from One table to another

    Hi all,
    Can we transfer data from Cluster Table to ZTABLE (Transparent Table)?
    if Yes, How can we do that?
    Thanks
    Devinder

    Hi,
    Generating a (surrogate) primary key value is usually done using:
    A) an Oracle sequence to generate a number
    B1) refer to the NEXVAL of the sequence in your insert statements
    or
    B2) a trigger on your agents table that populates agent_id by referring to the NEXTVAL of the sequence.
    Both approaches have pro's and con's, see what best fits your requirement.
    See this explanation (including examples):
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:6575961912937#tom6583848685931
    Also, since you're new to SQL, check the [Oracle docs|http://www.oracle.com/pls/db102/homepage].
    (Or http://www.oracle.com/pls/db112/homepage if you're on 11G)
    Especially the Concepts and Fundamentals.

  • Best method for transferring data from one database to another?

    There is an 8i database I have to deal with on a regular basis. Besides being completely outdated and unsupported, in my opinion the database has not been well-maintained--for a table with 25 million records, should ‘select count(*) from table;’ take 5 minutes to run? I don’t really know, but that seems long to me. Many complex queries (most including only tables with less than a million records) take a ridiculously long time to run, to the point that I can’t even run some of them.
    I am not the DBA; I don't have the authority to fiddle with the database (nor would I feel comfortable doing that), and the powers that be will not put effort into improving functionality of this database due to an alleged plan to update/replace it within the next year. However, in the mean time, I still have to get data out of this database on a regular basis.
    I have XE 10g installed on my local machine, and I have set up a database link in it to the 8i database. I have found that I can pull in basic data (simple queries) from the 8i database into tables in my XE database (e.g. create table tbl1 as select data from tbl1@8idb) and then query those tables to get the information I need much, much faster (including creation of the tables). While this option does not allow me to create queries/reports that other people can run, it makes work I’m doing only for myself much faster.
    What I’m wondering is, what is the best way to bring the information I need over to my database? I usually don’t need entire tables, and I can probably identify a number of key tables (or parts of tables) I need. What I’ve been doing up until now is writing CREATE TABLE statements on the fly, but then I end up forgetting what all I’ve done, and each time I want up-to-date data, I have to drop the tables and re-create them. It seems to me that there should be an easier way to do this than to copy and paste from a text document into SQL*Plus.
    Does anyone have any suggestions for me on how best to do this?

    Sorry, I guess I posted this in the wrong forum. I re-posted in the database-general forum.

Maybe you are looking for