Transferring From Final Cut Express to Pro

Hey! I am looking to upgrade from Final Cut Express to Final Cut Pro. I have a present project in Express and plan to finish it shortly. However, can I take this file from Express and finish editing it in Final Cut Pro?
Thank you!

It has been reported that FCE projects will open in FCP. It does not work in the reverse direction, once the project is in FCP, FCE will not open it.
x

Similar Messages

  • Upgrade from Final Cut Express to Pro 5.0

    I think I made a stupid mistake. I purchased Final Cut Pro 5.0 upgrade thinking I could upgrade from Final Cut Express. But when I am asked to enter the previous versions serial number, it does not accept it. Is there any way to do this or am I going to have to buy the full version of Final Cut Pro?
    Also, I have a G4 Powerbook with the following specs. Is it going to run the program if I do finally get it installed?
    CPU Speed: 867 MHz
    L2 Cache (per CPU): 256 KB
    Memory: 640 MB
    Bus Speed: 133 MHz
    NVIDIA GeForce4 MX

    To upgrade from FCE you need the Final Cut Pro 5 Upgrade from Final Cut Express. I just upgraded FCE and that worked fine for me.
    Hope this helps answer your question...

  • Importing file from final cut express to final cut pro

    Hello, I am taking a video I have been working on from final cut express and opening it into final cut pro on another machine. It brings footage over but completely incorrect. I am editing a music video and its basically taking the files and putting them out of sequence etc. When I first open up final cut pro it will say do you want to update this video to the new version which I expected to which I respond yes but its jacked up after that. Any suggestions?

    Generally, I just drag the DV file from the finder to the iDVD menu window. Make sure you don't drag it to any Drop Zones, I think that might be your problem with the DV file showing up as the background. If you have default settings in iDVD, this drag and drop should then create submenus based on your chapter markers.
    I'm not sure if you have any issues with the Chapters not showing up in QT. If you're expecting them to show up, then make sure that when you do the Export to QT that the option to include Chapter Markers is set. Upon conversion, you should see the Chapters within QT as well as when imported into iDVD.
    Hope this helps!

  • Upgrade from Final Cut Express to Final Cut Pro

    Is there an upgrade path from Final Cut Express to Final Cut Pro?

    Why do you want to upgrade?
    Are there some features you particularly need?

  • Upgrading from Final Cut Express to Final Cut Pro

    I will be purchasing the new FCP version soon, along with the rest of the stuff in the Final Cut Studio package. Is there anything I might wish to save from Final Cut Express?
    Thanks,
    Will

    Though Motion has inherited most of the functionality of LiveType in the latest versions.
    x

  • Final Cut Studio 2 Migration path from Final Cut Express

    I'm currently using FCE HD 3.5, which I upgraded from FCE version 1.0
    I understand that no migration path exists from Final Cut Express to Final Cut Studio 2.
    However I have seen on ebay someone selling an upgrade to Final Cut Pro 5 HD from Final Cut express.
    I was wondering.... if I got this then could I then get a Final Cut Studio 2 Upgrade from FCP 5 HD?
    Does anyone see any problems with doing this? It seems to be a way to save money.
    Thanks,
    Steve.

    And it's well worth it. you can recoup a little of
    your cost by uninstalling fce and selling it.
    What's required in order to sell it? Can the registration be transferred to a new owner?

  • Is it possible to make an MPEG-2 from Final Cut Express ?

    I need to make an MPEG-2 file, exported from Final Cut Express 4. But I don't see an option for it.

    Which type of MPEG-2 file?
    There are three common types, each with their own variants:
    Elementary Stream (.m2v) - contains video only; no audio.  Commonly used by DVD authoring applications prior to multiplexing (muxing) with a separate audio file.
    Transport Stream (.mts or .m2t) - muxed video and audio.  Commonly used for tranferring broadcast quality video over a network.
    Program Stream (.mpg or .mpeg) - muxed audio and video.  Commonly used for automated server based playback.
    At one time QuickTime Pro included an MPEG-2 encoder, but I believe Apple removed that option with the introduction of Compressor.  Other apps for encoding include: Sorenson Squeeze, Cleaner and Episode ... to name a few.
    -DH

  • Best export method of footage from Final Cut Express to DVD?

    I'm exporting footage from Final Cut Express using Quicktime Player and then burning the footage to DVD using iDVD.
    The end result on DVD has very jagged interlacing (or noise) on objects in motion which aren't present when viewing the footage on FC. I don't think the problem is with iDVD (I assume I'm burning a pristine copy of an already reduced-quality clip).
    Are there any changes I can make to the system preferences either on FC or Quicktime Player to reduce or prevent loss of digital information, or can anyone suggest better methods of export from Final Cut Express to DVD?

    Hello
    I'm not sure if this is relevant:
    I've been using the Quicktime Conversion settings;
    http://www.locationstudio.net/Settings.jpg
    29.97 Frame Rate
    Highest Quality
    NTSC/PRO
    I was under the impression that this was usually best - haven't had any problems with iDVD
    Mike

  • Final Cut Studio 2: upgrade from Final Cut Express HD

    I'm guessing I know the answer to this question already, but I'm hoping someone will tell me I'm not correct. Is there an upgrade path from Final Cut Express HD 3.5.1 to Final Cut Studio 2? I don't see one listed on the software page in the Apple store. Seems ashame if there isn't. I'm sure there are other FCE HD owners out there who would like to upgrade rather than starting over for the tune of $1299.
    G5   Mac OS X (10.4.9)  

    And it's well worth it. you can recoup a little of
    your cost by uninstalling fce and selling it.
    What's required in order to sell it? Can the registration be transferred to a new owner?

  • What file type to export vid from final cut to studio pro

    Beginner here, the question I have is what is the best file format to export from final cut to studio pro so that I will play in a decent to good quality on a DVD that I make in studio pro. Thanks.

    For my FCS projects, I export DV_NTSC "anamorphic" (I use 16:9 format) to a "reference" movie: that is quite fast after all rendering is completed and the resulting file is pretty small. The only disadvantage to "reference" I've found is that you must keep all those FCS file around since those are what is referenced by the export.
    I export like that instead of exporting to compressor because for me, exporting directly to compressor is very slow; on my G5 Quad, my compression step is about 1:1 with real time.
    You can take those .mov files into DVDSP and let it do the compression using your defaults. I prefer to use Compressor directly so I can set the compression, Dolby, etc. parameters. Compress to mpeg2 and AC3 (Dolby Digital) and if you are just in stereo, just keep it in stereo, check the "no surround encoding" and make sure the highest audio level in either channel is -3db (or the compressor setting let you reduce the level by 3db). That prevents a downmix to mono (like on a cheap TV) from clipping (-3db + -3db = 0db. (zero plus zero = +3db and is clipping).
    Ed

  • Exporting HD Video From Final Cut Express HD

    When attempting to export HD video from Final Cut Express using "uncompressed" setting, I notice that the output quality seems to be limited to "medium." If no compression is used, wouldn't that imply that the video quality should equal original footage?

    All FCE Timelines are using the AIC (Apple Intermediate Codec) for HD stuff if you selected the correct Easy Setup before you started your Project.
    If you export as a Quicktime Movie then you are getting exactly the same export quality as the Timeline.
    The Quicktime Movie can be either Self-Contained or a Reference file. Reference Files are great because they use/reference you exisating captured files on your Scratch Disc, use less space and export fast.
    However if you need to play the export somewhere other than your Mac your will require the file to be Self-Contained.
    QuickTime Conversion does just that, Converts to whatever you select.
    Al

  • Exporting a Video from final cut express and uploading to vimeo

    I film with a Sony FX-7 in 1080HDV and would like to know the specific settings of how I should export my video from Final Cut Express to vimeo to be played in HD mode on a vimeo account.

    I looked that link up but my video seems to be running pretty slow, here's the link to the vid http://vimeo.com/20580561
    Do u have any advice on what I should change for the settings?

  • Chapters to DVD from Final Cut Express 4

    I'm looking for a DVD authoring app that is compatible with Final Cut Express 4.  I want to have the chapter markers I created in FCX 4 to appear in my final DVD.  I tried exporting my FCX 4 project with chapter markers as a Quick Time movie and using iDVD '08 to burn a DVD.  In the dvd play-preview, none of the chapters were present.  I don't see anyway to create chapters with iDVD '08.
    Is there something I'm missing in Final Cut Express 4 when creating chapter markers or exporting? Is there a Mac version of a DVD authoring app other than iDVD that would work?
    Thanks.

    Thanks Tom.
    I followed the instructions and was able to get chapters from Final Cut Express to work in the iDVD preview.
    I'm not sure how to control the quality of the final DVD since choosing File>Export>QuickTime Movie goes straight to export without any frame rate or resolution choices.  Is there a default setting that is adequate for TV viewing?
    Thanks again for saving me time.
    BR

  • Problem with picture in burned DVD from Final Cut Express quicktime file

    I use Final Cut Express HD to edit. On more than one occasion, I have exported a movie using quicktime conversion and then used iDVD to burn it to a DVD. Every time I do this, the DVD's picture is shaky, especially when there is fast motion. I have tried burning with both the best performance and best quality settings in iDVD and it doesn't make a difference. The same problem occured when I tried to use a friend's computer to do the same thing. We both have the new 20" iMacs. I am not sure if it is Final Cut or iDVD that is the problem, but quicktime files that are not from Final Cut Express are not a problem. I have a feeling it is a setting somewhere that needs to be changed. Thanks!

    Greetings.
    I've personally never used iDVD for any sort of DVD authoring, but the symptoms that you're describing are giving me the impression that there may be an issue with the MPEG 2 encode. Again, I don't know iDVD so you might be better off asking this question in the iDVD forum.

  • What are the best data and bit rate setting for uploading from final cut express to Youtube?

    Can anyone suggest the best data rate and bit rate presets for uploading footage from final cut express 4 to Youtube? What settings will provide the best resolution, quality, and match the current youtube requirements?
    Thank you in advance for your help,
    Susan Kayne

    It depends on whether you are using aspect ratios of 4:3 or 16:9.
    Below is some simple guidance that will provide good quality with reasonably small file sizes.
    The first part is for 4:3 video:-
    1. File>Export Using QT Conversion.
    2. The "Format" window should say, "QT Movie".
    3. In "Use" select "LAN/Intranet" from the dropdown menu.
    4. Click "Save" and when it has finished encoding, upload it to YouTube.
    If you are making 16:9 video (Standard or High Definition) do steps 1 to 3 above.
    Then when you have selected "LAN/Intranet" press the "Options" button and in the new
    window that opens press the  "Size"  button and change the  "640x480" to  "853x480"
    To do this you will have to click on the  640x480 and a dropdown menu appears.
    Select "Custom" from  the bottom of the menu and in the window that opens
    you will see 2 boxes.
    Put  853  in the first box and  480  in the second.
    Click OK.
    Then Save it.

Maybe you are looking for