Transition to FI-CO to FI-AA

Dear All,
Can any body tell me that those who have certified on ECC6 in Financial Accounting will be called only FI consultanat or FI-AA consultant. ( AA = Assets Accounting )
Thanks.
Ali

Hi,
Vt is the posting variant u maintianed.
Can u confirm vtz d IT0003 of the employee. R u executing for the first time??
May be u had missed the selection screen inputs.
Just once again check n confirm.
Regards
Pavani

Similar Messages

How can I select just the clips, or just the transitions?

If I have a timeline with 50 or more clips (or still shots, in my case) with cross dissolves between each one, I would like to select just the clips, or just the transitions, but not both. How do I do this?
Why? I am creating a video with hundreds of stills and a few video clips, and occasiionally need to change the duration of all stills at the same time (from 3 seconds to 4, for example). Or, if I want all of the cross dissolves to last 1:15 instead of 1:00, it would be nice to select and change them all at once. However, in both cases, I can't figure out how to select all 50 without having to Command-click 50 times.
Any ideas you have will be appreciated.
Bart

To perform the same duration change on just the transitions (cross dissolves, in this example), this technique will work:
Open timeline index.
Enter "cross" in the search box (or whatever transition you're wanting to change).
Select all cross dissolves in list (click one, then type Command-A).
Click the time strip in the top of the timeline area.
All of the transitions in the list should now be selected in the timeline.
Control-D to change duration.
Enter new duration.
Hit Return.
I hope this saves someone all of the time I spent on it today. I'm still ahead, though, thanks to Tom's help. This saved litterally hundreds of Command-clicks.
Bart

Can not clear transition in MBP

I have a portable hard drive with a FCP 5.1.2 project on it. Most of this work is was done on an iMac G5. I can delete a cross dissolve transition just fine. However when I have this same project file running the same version of FCP on my Intel MBP, it will NOT delete the transition. It will remove the transistion from the timeline, but the transition is still there on playback! I noticed this same thing when playing with MBPs at the Apple store, but at the time I thought it was something with how the demo computers were set up. How do a delete a cross dissolve on a MBP? Whatever happen to platform independence?

Weird - I'll have to test it out on my MBP.
In the meantime try moving opacity up and down at the point where the transition used to be to force it to rerender and see if that makes it go away.
Dual 1Ghz G4 Quicksilver Mac OS X (10.4.7)

Transition Problems in Full Screen View

Hi.
I've created a Powerpoint presentation on the Bayeux Tapestry which I now want to convert to a PDF document so that I can add multimedia.
My Powerpoint presentation features photographs of a section the tapestry with each photograph placed on a separate slide. I've used the Powerpoint 'push left' transition to create a panoramic effect which creates the illusion that the tapestry is being scrolled from right to left as the viewer clicks through the presentation. It all works very well in Powerpoint as the slides butt up against each other in transition without any 'seam' between them.
I thought I could simply replicate the effect in Acrobat 9 by converting the presentation to PDF and selecting the 'push left' transition from Advance/Document Processing options then launching the document in full screen view. However, I've found that using a push left transition in Acrobat creates wacking great gaps between the pages as they scroll right to left: this absolutely ruins the whole effect.
As you can probably tell, I'm pretty much a newbie with Acrobat 9 (but not with other Adobe applications) and I can't work out for the life of me how to get around this problem. Is there someting simple that I'm overlooking on the full screen view options or perhaps in the Powerpoint conversion settings or do I have to start adjusting resolutions etc? Or maybe it's just the nature ofthe beast (do hope not)?
I'd be very grateful for any enlightenment or advice.
PS: Forgot to mention the Powerpoint was created in default landscape layout and hence so is the PDF.

Do you have the PDF version to fill the full screen and not leave borders? If you print to PDF (not create PDF), then a margin is added by default (as when you print to paper). The border can be reduced to 0, but that is an extra step with the print. As I recall, the PDF Maker (create PDF) does not include the margins. Thus the whole margin bit may be the issue.

Having problem with FCP 5.1.4 adding transitions. Just new to this app.

So I get 2 maybe 3 transitions set correct. After that none work properly. ie: lets go for the quicktime zoom transition. So as it zooms out it plays the first quarter of the 1st part of the transition in the zoom box. This is not correct it should be playing the second part of the transition. Anyway about 1/4 of the way through it does play the second half of the transition which is correct and plays the rest of it properly. It does the same for cross dissolve and all other transitions. I have trashed the preferences but that doesn't seem to help. I have also changed the preferences and that doesn't help. OS is 10.5.8; 6g of ram; powermac g5 quad core 2.5ghz;
Please if anyone can help.
Below I entered FCP 6 because 5 was not available.

Just to clarify, by "FCP 5 friendly source material," he means video files that are a format (codec) that FCP 5 supports. What FCP 5 supports can be found in the EASY SETUP list. If the format you are working with isn't there, say if your footage is H.264 or MP4 or some other web compressed format, FCP won't work properly. It needs to be in an editing codec if you want FCP 5 to work with it.
Also, you need to make sure that your sequence settings match the settings of the footage you are trying to edit. If you add a clip to the sequence, and immediately have to render, that's a big clue to say that something isn't right. You should edit without rendering at all.
The most important thing you need to do is properly set up your project from the start, and the best way to do this is to choose a setting from the Easy Setups, located under the Final Cut Pro menu. Once you do this, you’ll need to create a new sequence. This is because the sequence that is already in your new project is setup for the typical default setting of DV/NTSC, or for the settings of your last project, which might not match what you are currently working with. So delete SEQUENCE 1 and create a new sequence:
This new sequence will contain the settings you chose in the Easy Setup menu, and should match the format you captured

Purchasing transitions (and/or creating ones in Motion)

I'm going to be doing a lot of work for a pretty straight-forward interview type TV show that is looking to spice up its transitions and are open to the idea of purchasing some to go beyond what FCP includes. I was looking at the ones from Eiperle and Eureka (both of which look good, are affordable, and can be used on multiple computers) and Sapphire. I'm wondering A) if there are others I should look into and B) which people recommend for what is essentially an Entertainment Tonight style show.
Also, I'm wondering if it is possible to create transitions in Motion that can be dropped into FCP (or better yet, if the templates, such as the 'frames/glass' one, can be saved without elements and dropped into FCP as a transition between clips)
Thanks for your help!

This link http://www.fxscriptreference.org/ doesn't work for me, it says:
Forbidden
You don't have permission to access / on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Apache/1.3.33 Server at www.joemaller.com Port 80
I really want to make my own scripts in FCP so can you check if this is the right link or if something else is wrong?
Thanks
- Aleks

FAQ: Revel Transition basics: How does this affect the way I use my Adobe software?

Q: How will this change the way I use my Elements software?
A: Once you have migrated your files from Photoshop.com to Revel, it will be no longer be possible to sync your photo and video files between your Photoshop Elements Organizer and Photoshop.com.
If you're using Photoshop Elements 11, you can share your JPEGs from the Elements Organizer to AdobeRevel.com.
If you’re using Photoshop Elements 10 or earlier version, you won’t be able to directly import from Revel or export to Revel.
Q: How will this change the way I use Photoshop.com?
A: Photoshop.com accounts will be remain accessible until the end of the transition period CLICK HERE to see dates and details, but once we begin moving your photos to Revel you will no longer be able to upload photos to your Photoshop.com account.
After the transition period CLICK HERE to see dates and details, all Photoshop.com accounts will be closed. The Photoshop.com website will remain live and continue to offer product information, trial software downloads, photo editing functionality, customer spotlights, tutorials, and other resources.

very_nice wrote:
The suggested advice in this support article http://support.apple.com/kb/HT1478 wasn't a help at all, because the option "enable disc use" in the summary window of itunes doesn't appear.
*From the article*:
Products Affected
iTunes 7 for Mac, iTunes 7 for Windows, iPod nano, iPod shuffle, iPod mini, iPod, iTunes 8 for >Windows, iTunes 8 for Mac
No mention of the Touch, it works differently from other iPods and has no "disk mode" as such.
I think it can be used as a storage device by using a 3rd party App, search the the App Store for such items.
Photos transferred to your Touch via iTunes will be of severely compromised quality i.e 640x480 pixel resolution and file size around 600-700 kb. These can be retrieved, again using a 3rd party application on your computer, such as [Touch Copy|http://www.wideanglesoftware.com/touchcopy> but you will not get back original quality images.
Good luck,
Dud.

Yoga 2 Pro no longer detects orientation/transitions and lid closing for sleeping

My Yoga 2 Pro used to detect orientation and transition with no problem and the Transition app would pop-up the notification for Tent mode or Tablet mode, etc.
Everything worked great... then, within last couple weeks, it stopped detecting closure of the lid to trigger sleep mode (though the screen would go black) and now I've also found that it has stopped detecting the different modes and will only operate in Laptop mode... no Tent mode, no Tablet mode, etc.
Now, to put it into sleep mode, I have to select it from the Start menu and then close the lid (it does detect reopening the lid and wakes up as usual).
Obviously not having the ability to use those other 3 modes kinda defeats the purpose and value of having a Yoga 2 Pro!
Suggestions welcome for research to aid in restoring this functionality...
Solved!
Go to Solution.

Go to Control Panel >> Device Manager
There is Sensor devices tab there.
Can you post a screenshot of how that is looking?
One thing that you can try.
Switch off your laptop.
Disconnect power supply
Press power button for 30 seconds.
Then turn on and test.
Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
When your plans fail, your Real Story begins!!

More Text and transitions???

Hey guys i love the new iMac and iMovie, but i want More text options and more transition options. i have a a friend that has an older version and has a LOT!! of extras for these two options i cant seem to find any, Can anybody help me, Please!!

Download iMovie version 6 (free to iMovie 7 users) or use QuickTime Pro to make your Web based files:
http://homepage.mac.com/kkirkster/RedneckTexasXmas/index.html

Text caption transition

I have a slide with a stand-alone video (not a slide video). I also have a text caption below the video that I want to be static text. But no matter what I do with the text caption's properties, it fades in and out. I've set it to no transition, I've tried fading in only and setting the timing to 0...no effect. I have the text caption set to play for the side duration. Still no effect.
Am I missing something really elementary here?
Thanks!
Rachael

Hello and welcome to the forum,
Is this the first or the last slide of the file? I'm asking this because the default Start & End setting of a file is also to fade in/out. You can change that in the Preferences, Project, Start & End. I suppose you already checked the slide transition?
Lilybiri

Text Caption Transition--"Apply to All" is missing

Hello,
I just upgraded to Cp 5 (from 3) and love it, love it, love it.
I will be doing a demo at a conference next week (i.e., "Here is how you build a simple music listening exercise in Captivate...") and I want to demonstrate the "Apply to All" feature, but it seems to be missing for text captions. (The icon that appears in the upper-right corner for most other properties is not there in the text-caption transitions panel.)
I know I can probably set this globally in "Preferences" but the point is that I want to demonstrate the features of the program. So I "build" the project for the audience, then say "okay, if you don't like the transitions on the text captions, here's how you go back and change them all..." Except it seems that you can't. Screen shot is attached; any wisdom from fellow forumites is much appreciated!
JR

Hello,
Transitions, Caption style, Character and Format do not have a separate Apply button, they can be changed together if you use the Apply to .. button (or Change Default style) in the upper part of the Property inspector. I can understand that you want also the Transition to be changed separately, please fill in a Feature request in that case.
Feature request
Lilybiri

Importing transitions from imovie to final cut problems

Hello, I made a musicvideo in imovie, it´s all finished with cuts and transitions but I want to make the "final touch" with balance, colours etc in final cut.
The problem: when I import the imovie project into final cut pro x the clips and the transitions changes the duration so the clips nolonger sync with the music and some of the clips are much longer/shorter than the original. I don´t want to do all the job again, editing and add new transitions in final cut as it already took me a long time......Anyone have any solution?

You can delete the transitions in iMovie and re-add them after importing into FCP X. Granted, this is some work, but it should not be all that much. It is easy to add a number of transitions and to set their parameters all at once.
Like BenB said, transitions behave differently in both programs, and they do not match, so this conversion can cause problems, as you are now well aware.

I have one paid mobileme account, few days ago I have done transition to iCloud and all my iDisk, contact... gone. Today I tried login to iCloud application on my windows pc but can not, it said "this apple id is valid but is not iCloud account"

I have one paid mobileme account, few days ago I have done transition to iCloud and all my iDisk, contact... gone. Today I tried login to iCloud application on my windows pc (64bit) but I can not, it said "this apple id is valid but is not iCloud account". I can login on website icloud.com but can not login into iCloud application installed on pc. What's wrong?
I have tried another free apple ID and logged on. That's funny when I can login with free account and can not login with paid mobileme account!!!!!!

By the way - the only reason I downloaded iCloud is because Apple deleted the backup option from iTunes. Since iCloud doesn't work, I guess we have no way to protect our iTunes music collection. Absolutely stupid.

How do I resolve share frame errors (-1) with frames in which FCP seems to place a transition mark in the form of an L-shaped or reverse L-shaped figure?

When I try to use Share to a master file, I get an error that states: "The share operation Master File has failed. The operation could not be completed because an error occurred when creating frame 158 (error -1)." This has occurred with different frame numbers. When I delete them, it might disappear for that frame, but then shows up later for others. It seems that the problem is occuring right at the transition point between two clips. FCP seems to be putting an L-shaped figure on the last frame of one clip and a reverse L-shaped figure on the first frame of the next clip. The faulty frame seems to be one of those two frames. The clips I am having trouble with were from an old, non-digital cameral. We had converted them to DVDs and then I converted them to MPEG-4 files using Mac X DVD Ripper Pro. The converter seems to work fine and I can play the converted movie with Quick Time. Also, FCP will import the converted movie and works just fine with it as a clip and in the timeline. But when I try to share, I keep getting these errors. Short of deleting all of these old clips from the movie, which would be sad, how do I solve this problem?
After looking at previous discusion threads I have already saved to a new project, deleted the clip and re-imported it, and eliminated the transition effect from between the clips. But I still get the same errors.
I also get an error when I try to share to DVD, but that error is a "0" error that doesn't mark the location of the problem. I'm assuming it is the same problem as the one when I try to share to master file.
One other weird thing is that in a slightly older version of the movie with the same clips, I was not able to share to DVD but it did share to a master file. That almost seems like pure luck right now.
Please help!

MPEG-4 should not be used in FCP unless it is converted first or optimized in the application.
Trash your preferences. Trash your project render files. Switch off background rendering. Do not re-render. Export your projects.
Ignore the last frame and first frame indicators.

Problem with sound, and problem with video transitions

For some reason my audio isnt locked with my video anymore so when I move a clip the audio doesnt follow does anyone know how to fix that?
Also, when I put in video transitions instead of just switching from the first clip to the second clip it flashes an image from other pieces of footage while transitioning and I need to figure out how to fix that too.
Anyone know how to fix these?
thanks

Thanks i got the audio problem fixed.
When I open up final cut it says some of the media has been disconnected but it then says I can't reconnect it or something like that, I don't know if that effects the transitions. I split up a lot of footage and rearranged it and for one of the places where it flashes a clip it shows one of the pieces of footage that I had deleted because it had a glitch and the other places I noticed it it had random clips from throughout the project, like a flash of an interview that happens way later in the film. So it is random clips that are in the film and even clips that I deleted.

Problem with "transitions" in PS Elements 9

I am a long time Roxio user, but recently purchased PS Elements 9. I find some things vastly superior, while other things seem to be a severe step in the wrong direction. At first glance "transitions" fit into the latter category. My problem is that if I use a simple transition such as a "cross dissolve" the transition is not visible at all, even if I lengthen the duraton to a lengthy 10 seconds. I'm hoping that the problem is simply that I am new to PSE and that I am not doing somthing correctly. BTW, if I use a transition such as a page turn, it works fine, which only makes the invisibility of the dissolve all the more puzzling.

The A-B Roll editing was the only way to do it, back in the days of film. One created one reel, with the footage alternating between segments of black leader. The second reel was created with black leader in the places where the A Roll had footage, and footage, where the A-Roll had black leader. The footage overlapped by 1/2 of the desired Duration of the Transition - Cross-Dissolve, and both the A-Roll and the B-Roll were printed onto a single reel of film by the lab. The editor had to account for the Handles, or the Cross-Dissolve did not work in the print.
There were basically 3 Transitions possible: the Butt-Cut, Fade-to-Black (which in Video is most often called Dip-to-Black), and the Cross-Dissolve. The first was just what it sounds like, and the Tail of one Clip was butted to the Head of the next. The junction was either glued, or taped into place. The Fade-to-Black could be done in the lab, or with either the shutter, or the iris in camera. The latter was done primarily in the lab, though I had one camera that allowed for a Cross-Dissolve, by rewinding the last footage by a number of Frames, and then with the adjustment of the shutter angle, a Cross-Dissolve was created. One had to count carefully, or that Transition would be lop-sided, and not look good and smooth. Basically, this was a controlled double-exposure, created in-camera.
With Video editing, things improved, and if a switcher was placed between the source video tape machine, and the destination tape machine, more could be done. When NLE's were developed, the A-B Roll layout came along. It was not until several generations later, that single-Track editing became available. For anyone with a film background, the concept of Handles was easy to comprehend, as they had worked with them, in that overlap. Users, new to editing, however, found Handles a very abstract concept.
I still do a lot of A-B Roll layouts, just like Ted's example, but usually with animated Titles, and PiP compositions.
Even though I have many hundreds of available Transitions, I still rely almost exclusively on "the Big 3" - Butt-Cut, Dip-to-Black and Cross-Dissolve. Before I would use any other, I would need for it to enhance my "story." I even use the Big-3 to tell part of the story, and each has its place. The audience's concepts of time and place can be enhanced and expanded by their use and by their attributes, such as Duration. I know that this is getting into the realm of "story telling," and gets beyond the mechanics of a Transition.
Good luck,
Hunt

Transition to FI-CO to FI-AA

Similar Messages

Maybe you are looking for