Translate not working for Budget rate for different scenarios
I have created 2 new scenarios and the custom4 exchange rates is only working for [None] but not for BUDR, BUDRPY, or CONR.
I can't see anything obvious within the translate rule that affects these new scenarios.
' =========================
' (25) Translation
' =========================
Sub Translate()
Dim strYear,aC2,aC3,aC4,aC5,aC6,opinp,curr,svt16,op,fxinp
strYear = HS.Year.Member()
aC2 = HS.Custom2.List("MVMT_EQ","[Base]")
aC3 = HS.Custom2.List("MVMT_IFA","[Base]")
'aC4 = HS.Custom2.List("MVMT_IFA_DEPN","[Base]")
aC5 = HS.Custom2.List("MVMT_MASTER","[Base]")
aC6 = HS.Custom2.List("MVMT_INVEST","[Base]")
opinp = ".C2#OPBAL_INP.C4#[None]"
curr = ".C4#[None]"
svt16 = ".C2#MVT1600.C4#[None]"
op = ".C2#OPBAL.C4#[None]"
fxinp = ".C2#FXINPUT.C4#[None]"
HS.Trans "C4#BUDR", "", "A#BUDR", ""
HS.Trans "C4#BUDRPY", "", "A#BUDRPY", ""
HS.Trans "C4#CONR", "", "A#CONR", ""
Both these new scenarios are setup the same as our main Actual scenario as YTD for data input.
We do expand on the translation rule for specific C2 balances for just the Actual scenario for the various balance sheet sections like Equity, Investments to apply specific exch rates for OPE and movements but this should not affect these new scenarios I would not have thought.
Grateful for any assistance.
Thanks
LG
I found another rule that could be where my problem stems from: - halfway down it refers to Budget and Forecast scenarios and my new scenarios are Cashflow and Strategy so do I have to add them here??
Sub copyC4None()
'Debug
If Debug = True then
Writetxt("Debug," & HS.Entity.Member() & ",CopyC4None sub-routine started")
End If
'Copy all data for conversion to Budget rates
dim strReviewStatus,strScenario,strYear,strPeriod,strEntityDefCurrency,strEntity,strView,strDataUnit,myDataUnit,lNumItems,i,lAccount,lICP,lCustom1,lCustom2
dim lCustom3,lCustom4,dData,strCustom4,lC4Dest,strAccC4Top,sAccount
strScenario=HS.Scenario.Member()
strPeriod=HS.Period.Member()
strYear=HS.Year.Member()
strEntity=HS.Entity.Member()
strReviewStatus = HS.ReviewStatus("")
' Copy Entity Currency to Entity Currency and Entity Curr Adj to Entity Curr Adj on the alternate translation members
'strDataUnit = "C4#[None].V#<Entity Curr Total>"
Select Case lcase(Left(strScenario, 6))
Case "budget", "forecast", "budget_final"
strDataUnit = "W#YTD.C4#[None]" ' changed by sarav on 29-05-2008 from W#Periodic to W#YTD
Case Else
'strDataUnit = "C4#[None].V#<Entity Curr Total>"
strDataUnit = "C4#[None]"
End Select
SET MyDataUnit = HS.OpenDataUnit(strDataUnit)
lNumItems = MyDataUnit.GetNumItems
IF strScenario <> "" THEN
For i = 0 To lNumItems - 1
Call MyDataUnit.GetItemIDs2(i, lAccount, lICP, lCustom1, lCustom2, lCustom3, lCustom4, dData)
sAccount = HS.Account.MemberFromID(lAccount)
sAccountUD1 = Left(HS.Account.UD1(sAccount),2)
strAccC4Top = HS.Account.C4Top(sAccount)
If strAccC4Top = "TotalCustom4" And sAccountUD1 = "TB" Then
For Each strCustom4 In HS.Custom4.List("EXCHANGE", "[Base]")
If strCustom4 <> "[None]" Then
lC4Dest = HS.Custom4.IDFromMember(strCustom4)
Call HS.SetData(0, lAccount, lICP, lCustom1, lCustom2, lCustom3, lC4Dest, dData, False)
End If
Next
End If
'End If
Next
END IF
Edited by: jamdom on Aug 3, 2011 11:42 PM
I have worked it out - the first issue was the scenarios in the Select Case were not all stated nor were they 6 characters in length
Select Case lcase(Left(strScenario, 6))
Case "budget", "forecast", "budget_final"
now Case "Budget", "Foreca", "Cashfl", "Strate", "Actual"
The second issue was the account list in UD1 - I had to amend the member list to include these new accounts, then in the metadata tag the UD1 for these codes then amend the sAccountUD1 to include this new list
sAccount = HS.Account.MemberFromID(lAccount)
sAccountUD1 = Left(HS.Account.UD1(sAccount),2)
strAccC4Top = HS.Account.C4Top(sAccount)
If strAccC4Top = "TotalCustom4" And sAccountUD1 = "TB" Then
now If strAccC4Top = "TotalCustom4" And sAccountUD1 = "TB" or sAccountUD1 = "CF" Then
and it works!! Yeh!!
LG
Similar Messages
-
Trusted RFC not working for different user , working for same user
Dear All,
I have two SAP system - One Solman (7.0) and another ECC 6.0 (SR3) on HPUX box with Oracle DB (Unicode).
I want to establish Trust relationship between these system.
I have configured the same, as per the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/8b/0010519daef443ab06d38d7ade26f4/content.htm
and note 128447.
My requirement is one user X in solman client 001,
will execute some test plan (Tcode stwb_2) which will take the control to ECC 6.0 client 200, execute the tcode as user Y and come back in Solman again.
The user X (SAP_ALL) exists in Solman - client 001 and user Y (SAP_ALL) exists in ECC 6.0 - client 200.
In ECC 6.0 client 200, I have created a role ZRFCACL with the following and assigned to the user Y (as per the above help / note):
Role : ZRFCACL
Auth. Obj: S_RFCACL
Value assigned to fields are:
RFC_SYSID : SOL
RFC_CLIENT: 001
RFC_USER : X
RFC_EQUSER: N
RFC_TCODE : *
RFC_INFO : *
ACTVT : 16
Whenever the user X is trying to execute the test from solman, he is getting the error : "No authorization to log on as trusted system (RC = 0)"
Each time the user is trying the above, in ECC 6.0, the following dump is occuring:
CALL_FUNCTION_SINGLE_LOGIN_REJ under username SAPSYS
I have assigned the role ZRFCACL to user X in Solman also.
Next, I have performed the following check:
created one user M in both system
created the role ZRFCACL2 in ECC 6.0 client 200 as follows and assigned the role to user M:
Role : ZRFCACL2
Auth. Obj: S_RFCACL
Value assigned to fields are:
RFC_SYSID : SOL
RFC_CLIENT: 001
RFC_USER : ''
RFC_EQUSER: Y
RFC_TCODE : *
RFC_INFO : *
ACTVT : 16
Assigned SAP_ALL to user M in both system (So the user M in Solman does not have ZRFCACL2).
This time, the trust relationship worked and no dump got generated.
I have also checked the thread Trusted RFC do not work
but unable to resolve the issue.
Any suggestion where the things are going wrong in this / what else I need to check or this is not possible at all?
Thanks in advance for your help.
SudipHi Valdecir,
Thanks for the reply. I am providing the detail of the generated dump below:
Please check in case any clue is there.
Runtime Errors CALL_FUNCTION_SINGLE_LOGIN_REJ
Date and Time 12.08.2008 18:59:32
Short text
No authorization to logon as trusted system (Trusted RC=0).
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPMSSY1" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An RFC call (Remote Function Call) was sent with the invalid user ID "98819 "
. Or the calling system is not registered as trusted system in the
target system.
How to correct the error
The error code of the trusted system was 0.
Meaning:
0 Correct logon as trusted system mode
1 No trusted system entry for the calling system "SOL " or the
security key entry for the system "SOL " is invalid
2 User "98819 " does not have RFC authorization (authorization object
(S_RFCACL) for user "98819 " witl client 001.
3 The timestamp of the logon data is invalid
The error code of the SAP logon procedure was 1.
Meaning:
0 Login was correct
1 Wrong password or invalid user ID
2 Locked user
3 Too many attempted logons
5 Error in the authorization buffer (internal error)
6 No external user check
7 Invalid user type
System environment
SAP-Release 700
Application server... "gcbeccd"
Network address...... "10.10.4.158"
Operating system..... "HP-UX"
Release.............. "B.11.23"
Hardware type........ "ia64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "gcbeccd"
Database type..... "ORACLE"
Database name..... "RD3"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 5 2008 00:55:24"
create on........ "HP-UX B.11.23 U ia64"
Database version. "OCI_102 (10.2.0.1.0) "
Patch level. 146
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "HP-UX B.11"
Memory consumption
Roll.... 16192
EM...... 4189840
Heap.... 0
Page.... 0
MM Used. 1194640
MM Free. 2992576
User and Transaction
Client.............. 000
User................ "SAPSYS"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "489F2BD6C36D0F12E10000000A0A049E"
Program............. "SAPMSSY1"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "SOL"
Database Release.... 700
Kernel Release...... 700
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. 001
User................ 98819
Transaction......... "SMSY"
Call Program........."SAPLSRTT"
Function Module..... "SCCR_GET_RELEASE_NR"
Call Destination.... "SM_RD3CLNT200_TRUSTED"
Source Server....... "gcbsolm_SOL_00"
Source IP Address... "10.10.4.206"
Additional information on RFC logon:
Trusted Relationship "X"
Logon Return Code... 1
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPMSSY1" - in
"REMOTE_FUNCTION_CALL".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 67
of the (Include) program "SAPMSSY1".
Source Code Extract
Line
SourceCde
37
endmodule.
38
39
module %_rfcdia_call output.
40
"Do not display screen !
41
call 'DY_INVISIBLE_SCREEN'.
42
perform remote_function_diacall.
43
endmodule.
44
45
module %_cpic_start.
46
if sy-xprog(4) = '%RFC'.
47
perform remote_function_call using rfctype_external_cpic.
48
else.
49
call 'APPC_HD' id 'HEADER' field header id 'CONVID' field convid.
50
perform cpic_call using convid.
51
endif.
52
endmodule.
53
54
55
form cpic_call using convid type c.
56
communication send id convid buffer header.
57
if sy-subrc eq 0.
58
perform (sy-xform) in program (sy-xprog).
59
else.
60
message a800.
61
endif.
62
endform.
63
64
form remote_function_call using value(type).
65
data rc type i value 0.
66
do.
>>>>>
call 'RfcImport' id 'Type' field type.
68
if sy-xprog = 'JAVA'.
69
system-call plugin
70
id 'JAVA' value 'FORW_JAVA'
71
id 'RC' value rc.
72
if there is no rollout on the JAVA side which
73
rolls both, JAVA and ABAP, we return to the
74
C-Stack and reach this point
75
76
in case there was an rollout, the ABAP-C stack is lost
77
and we jump direkt to this point
78
79
here we trigger the rollout on this Abap side with
80
the following statement
81
system-call plugin
82
id 'JAVA' value 'ROLL_OUT'
83
id 'RC' value rc.
84
else.
85
perform (sy-xform) in program (sy-xprog).
86
rsyn >scont sysc 00011111 0.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080812
SY-UZEIT
185932
SY-XPROG
SAPRFCSL
SY-XFORM
READ_SINGLE_LOGIN_DATA
Active Calls/Events
No. Ty. Program Include Line
Name
2 FORM SAPMSSY1 SAPMSSY1 67
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 2 Ty. FORM
Name REMOTE_FUNCTION_CALL
%_DUMMY$$
0000
0000
2222
0000
SY-REPID
SAPMSSY1
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
SYST-REPID
SAPMSSY1
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
HEADER
000000000000
000000000000
TYPE
3
0000
0003
SY-XPROG
SAPRFCSL
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5455445422222222222222222222222222222222
3102633C00000000000000000000000000000000
%_ARCHIVE
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RC
0
0000
0000
SY-XFORM
READ_SINGLE_LOGIN_DATA
000000000000000000000000000000
000000000000000000000000000000
544455444445444445445422222222
2514F39E7C5FCF79EF414100000000
%_SPACE
0
0
2
0
No. 1 Ty. MODULE (PBO)
Name %_RFC_START
%_PRINT
000 0###
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RFCTYPE_INTERNAL
3
0000
0003
Internal notes
The termination was triggered in function "ab_xsignon"
of the SAP kernel, in line 2491 of the module
"//bas/700_REL/src/krn/rfc/absignon.c#9".
The internal operation just processed is "CALY".
Internal mode was started at 20080812185932.
Calling system.....: "SOL "
Caller.............: "98819 "
Calling client.....: 001
RFC user ID........: "98819 "
RFC client.........: 200
Trusted return code: 0
Logon return code..: 1
Transaction code...: "SMSY "
Active state.......: "-782823270"
Note: At releases < 4.0, the information for the caller is not
available.
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
(0) 0x4000000003b2b450 CTrcStack + 0x1b0 at dptstack.c:227 [dw.sapRD3_DVEBMGS00]
(1) 0x4000000004d2c470 Z16rabaxCStackSavev + 0x1d0 [dw.sapRD3_DVEBMGS00]
(2) 0x4000000004d32160 ab_rabax + 0x3570 [dw.sapRD3_DVEBMGS00]
(3) 0x4000000002b43cb0 SignOnDumpInfo + 0x280 at absignon.c:2491 [dw.sapRD3_DVEBMGS00]
(4) 0x4000000002b3f2f0 ab_xsignon + 0xb30 at absignon.c:876 [dw.sapRD3_DVEBMGS00]
(5) 0x4000000002aa4cb0 ab_rfcimport + 0x1ad0 at abrfcfun.c:3599 [dw.sapRD3_DVEBMGS00]
(6) 0x40000000040f4a80 Z8abjcalyv + 0x500 [dw.sapRD3_DVEBMGS00]
(7) 0x400000000402f190 Z8abextriv + 0x440 [dw.sapRD3_DVEBMGS00]
(8) 0x4000000003f538b0 Z9abxeventPKt + 0xb0 at abrunt1.c:281 [dw.sapRD3_DVEBMGS00]
(9) 0x4000000003f360a0 ab_dstep + 0x280 [dw.sapRD3_DVEBMGS00]
(10) 0x4000000001cb4600 dynpmcal + 0x900 at dymainstp.c:2399 [dw.sapRD3_DVEBMGS00]
(11) 0x4000000001cab0e0 dynppbo0 + 0x280 at dymainstp.c:540 [dw.sapRD3_DVEBMGS00]
(12) 0x4000000001cb1ec0 dynprctl + 0x340 at dymainstp.c:358 [dw.sapRD3_DVEBMGS00]
(13) 0x4000000001c9dff0 dynpen00 + 0xac0 at dymain.c:1628 [dw.sapRD3_DVEBMGS00]
(14) 0x4000000001fea460 Thdynpen00 + 0x510 at thxxhead.c:4830 [dw.sapRD3_DVEBMGS00]
(15) 0x4000000001fb4de0 TskhLoop + 0x4e20 at thxxhead.c:4518 [dw.sapRD3_DVEBMGS00]
(16) 0x4000000001faae40 ThStart + 0x460 at thxxhead.c:1164 [dw.sapRD3_DVEBMGS00]
(17) 0x4000000001569ec0 DpMain + 0x5f0 at dpxxdisp.c:1088 [dw.sapRD3_DVEBMGS00]
(18) 0x4000000002c10630 nlsui_main + 0x30 [dw.sapRD3_DVEBMGS00]
(19) 0x4000000002c105c0 main + 0x60 [dw.sapRD3_DVEBMGS00]
(20) 0xc00000000002be30 main_opd_entry + 0x50 [/usr/lib/hpux64/dld.so]
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
SAPMSSY1
0
11.04.2005
09:27:15
22528
E
1
Prg
SAPLSCCA
1
05.07.2005
13:10:18
52224
E
2
Prg
SAPRFCSL
0
13.02.2005
17:31:45
17408
E
3
Typ
RFCSYSACL
0
13.02.2005
17:31:45
7168
4
Typ
SYST
0
09.09.2004
14:18:12
31744
Directory of Application Tables
Name Date Time Lngth
Val.
Program SAPMSSY1
SYST . . : : 00004612
\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x0001\0\0\0
Program SAPRFCSL
RFCSYSACL . . : : 00001760
SOL RD3
ABAP Control Blocks (CONT)
Index
Name
Fl
PAR0
PAR1
PAR2
PAR3
PAR4
PAR5
PAR6
Source Code
Line
116
CLEA
00
0035
SAPMSSY1
60
117
CLEA
00
0036
SAPMSSY1
60
118
CLEA
00
0037
SAPMSSY1
60
119
MESS
00
001C
SAPMSSY1
60
120
ENDF
00
0000
SAPMSSY1
62
121
00
0000
SAPMSSY1
62
122
PERP
00
0001
SAPMSSY1
64
123
PERP
02
0000
SAPMSSY1
64
124
WHIL
00
0002
0000
0000
0000
0000
0000
0000
SAPMSSY1
66
128
WHIL
00
0003
0000
0000
0000
0000
0000
0000
SAPMSSY1
66
132
BRAN
05
001E
SAPMSSY1
66
133
CALY
00
0003
0038
002A
0005
002B
0000
0000
SAPMSSY1
67
>>>>>
CALY
02
0000
0039
8000
0000
0000
0000
0000
SAPMSSY1
67
141
COMP
00
0002
0010
003A
SAPMSSY1
68
143
BRAF
02
000E
SAPMSSY1
68
144
SRFC
01
0000
003A
003B
SAPMSSY1
69
146
SRFC
01
0000
003C
C000
SAPMSSY1
69
148
SRFC
02
0000
0000
0000
SAPMSSY1
69
150
SRFC
01
0000
003A
003D
SAPMSSY1
81
152
SRFC
01
0000
003C
C000
SAPMSSY1
81
Thanks & Regards
Sudip -
installed Exchange 2013, upgrade to sp1 and clean as possible start use in production. All work fine for 2 weeks, when after last weekend go back to work and see what ecp and owa login broken.
1. it broke for some users, not all users. some users coud login.
2. it always after login redirect to error 500, domain.com/owa/auth.owa
3. i get other user login password, try from differet new pc. the same error.
4. with cache cleaning and add "?ExchClientVer=15" at the end i get to work two mailboxes, but cant get other to work.
IIS log:
2014-03-25 10:56:34 10.2.8.244 GET / - 443 - 10.2.8.101 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 0
2014-03-25 10:56:34 10.2.8.244 GET /owa/ &CorrelationID=<empty>;&cafeReqId=1289c5c9-fb04-4981-aa59-c3b7f30dde8a; 443 - 10.2.8.101 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko https://mail.domain.lv/
302 0 0 0
2014-03-25 10:56:34 10.2.8.244 GET /owa/auth/logon.aspx url=https%3a%2f%2fmail.domain.lv%2fowa%2f&reason=0&CorrelationID=<empty>;&cafeReqId=03257ee9-f71e-44f1-9f9b-4a7a3c688b5d; 443 - 10.2.8.101 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko
https://mail.domain.lv/ 200 0 0 15
2014-03-25 10:56:34 10.2.8.244 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fmail.domain.lv%2fowa%2f&CorrelationID=<empty>;&cafeReqId=383c956b-19d9-425e-9c45-44a5a50b4bbe; 443 - 10.2.8.101 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko
- 200 0 0 0
2014-03-25 10:56:38 10.2.8.244 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=84bcf2b6-57cf-41df-92f9-9224b3e5a706; 443 username 10.2.8.101 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko
https://mail.domain.lv/owa/auth/logon.aspx?replaceCurrent=1&url=https%3a%2f%2fmail.domain.lv%2fowa%2f 500 0 64 0
2014-03-25 10:56:38 10.2.8.244 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=10cd2e1c-ecdc-4ec8-beda-4a1728a57b8f; 443 username 10.2.8.101 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko
https://mail.domain.lv/owa/auth/logon.aspx?replaceCurrent=1&url=https%3a%2f%2fmail.domain.lv%2fowa%2f 500 0 0 15
2
5. no event log errors, only about exchange performance counters.
all what i did:
*recreate owa. recreate ecp directories in default website and backend website also ecp pool, and add it back.
*check website biddings;
*remove and readd certificate.
*disable OWA cache option.
*check user language options.
*check running services.
*check owa proxy health
* check owa and ecp authentification settings
* check for correct internal external url settings for owa and ecp.
* try with ssl req checked in or checked out -not help.
* try with redirect options disabled or enabled- not help
So now im are at the start point, didn't help anything. in is not resolution for sitting and trying to clear user explorer caches to tray get work..Hi,
Generally, the error was 500 which indicates some kind of authentication errors. To resolve the issue, please try the following checks:
1. Checked IIS, ensure that all of the authentication is set correctly and "Require SSL" is checked on the root of the default website.
2. Restart IIS service by running “IISReset /NoForce”.
3. If it fails, please try to start the “Microsoft Exchange Forms-Based Authentication” service on Exchange server.
Thanks,
Winnie Liang
TechNet Community Support -
Broadcasting Email Bursting option not working for different mprv
Hi BW experts,
I am facing an issue with Broadcaster settings wherein I am using Email Bursting option.
My setup is like following :
I am using info object ZHRLVL to store hierarchy levels within an organization.
ZHRLVL has an attribute namely email address(E1) which contains the email ids of various managers.
The info object ZHRLVL is included in 2 Multiproviders namely M1 and M2.
email address(E1) is enabled as navigational attribute and in all reports based on M1 and M2 there is a user input variable available for the same.
Both Multiproviders contain transactional records which have ZHRLVL values filled up.
Also in master data ,against ZHRLVL values(the same which are present in transactional record) , email address are maintained.
However, when executing IB settings queries on M1 and M2, Broadcasting works for M1 but however it doesnt work for M2.
Any help in this regards will be appreciated.
Best Regards,
ParthHey Sebastien,
Thanks for noticing that.My Mistake I didnt mention about the error message.
The error message comes in form of a warning saying that the recipients could not be determined.
This happens on top of my maintaining the email ids in master data against the corresponding transactional record values.
Would apperciate if you are able to suggest something here.
Best Regards,
Parth -
Query SQ07 Translation not working for default text
HI Experts,
In a query created with EN as default language, when execute - the selection screen will show the tiltle text (such as - Report-Specific Selection, Output Specification & Layout)
I am unable to translate these selection text to other language using SQ07.
When execute in different language - all text are translated except these 3 still remains in EN.
Do you know where can I change the text?
Should it not be standard and being translated automatically when log on to different language?
Kindly advice.
Thank YouThanks Sajid,
But are you suggesting to go into the program which was generated by SAP once created the query and do a change mode in SE38 ?
Isnt it not encourage to change from there & we need to register the object and get the access key ?
Correct me if i am wrong.
Any suggestions ?
Thank You. -
I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?
Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.
-
DNS not working for some computers
We have a SRP521W router and is set up with one SSID for wireless. In our office all the computers (5) can connect but only some may get on the internet. I have a laptop I am testing with and it will not connect, wired or wireless.
I found an article relating to flushing DNS, tried that, no luck.
I found another that said I should try setting my DNS to 208.67.222.222 and this worked, internet works fine.
I tried rebooting the DSL modem and router, tried many different things but am not a networking guru so I am just not sure why the DNS is not working for one computer but works for another, connected to same LAN or SSID.
Thanks,
BradThough what Don posted is one way to accomplish it, I never add anything to my DNS and it works fine. Windows DNS, in a default installation, will automatically forward to the root (.com, .edu, .gov, etc.). So I always just point my workstations
to my Domain Controller as their DNS and everything works just fine without any additional configuration.
Guess I'm one of those who won't even trust Google for sharing a DNS, particularly when I have never needed to set up any forwarders.
.:|:.:|:. tim -
Thunderbird Mission Control Desktop/AutoConfig not working for some users
I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\defaults\pref\custom.js"
It contains:
pref("general.config.obscure_value", 0);
pref("general.config.filename", "TMcustom.cfg");
I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\TMcustom.cfg"
It contains:
var promptService = Components.classes["@mozilla.org/embedcomp/prompt-service;1"]
.getService(Components.interfaces.nsIPromptService);
promptService.alert(null, "title", "testing");
For most of my users the alert pops up fine when I start Thunderbird, but for a few it doesn't. All of the machines where setup with the same install script. If I log into one of the machines where it's not working as a different user, then it works fine, so I know the files are in the right spot. So why would it not work for specific users? Is there something in the user's Windows profile that could cause it to not work? Or are there any other suggestions?As it turns out this was a known bug that was corrected in the recent release of Java 7_65 and Java 8_11. Here is a link to the bug description in the database.
Bug ID: JDK-8019274 RMI thread can no longer call out to AWT thread for webstart app -
MAM application is not working for some users
Hi All,
Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
If I use different user on the same device I can see the MAM application and MAM data.
What could be the wrong in this case. Any help would be highly appreciated.
Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
Middleware:SAP NetWeaver 2004s with Patch leve 15
Backend:SAP ECC 6.0
Application:MAM 3.0
Thanks and Regards,
Ameer.Hi,
from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
You need to solve this before you can go any further.
Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
Regards,
Larissa Limarova -
Auto_lexer (stemming) not working for other languages(other than english)
Hi All,
We are planning to use AUTO_LEXER instead of MULTI_LEXER and observed that stemming is not working for German where as it is working for English when I use AUTO_LEXER. I even used query templates but of no use.
But when i use MULTI_LEXER, creating sub lexers for German and Enlgish, Stemming is working for German also after changing the session language and setting stemmer of wod list to German (Which is expected).
Following is the code for AUTO_LEXER creation:
CREATE TABLE test_auto_lexer(pkey NUMBER(5,0),
lang_index VARCHAR2(3),
content_text CLOB,
CONSTRAINT test_auto_lexer_pk primary key (pkey))
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (1,'eng','I drive a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (2,'eng','I drove a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (3,'eng','I have driven a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (4,'eng','Just check for other things')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (5,'eng','always drive a car')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (6,'eng','it is nothing')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (7,'ger','Ich fahre ein Fahrrad')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (8,'ger','Ich fuhr ein Fahrrad')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (9,'ger','Ich habe ein Fahrrad gefahren')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (10,'ger','Aktivieren Sie einfach für andere Dinge')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (11,'ger','immer Auto fahren')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (12,'ger','es ist nichts')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (13,'ger','sprechen')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (14,'ger','sprach')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (15,'ger','gesprochen')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (16,'ger','tale')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (17,'ger','Indlæg')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (18,'ger','tales')
BEGIN
ctx_ddl.create_preference('auto_lexer1', 'auto_lexer');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','index_stems','yes');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','language','danish english german');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','alternate_spelling','german');
END;
CREATE INDEX test_auto_lexer_ix1
ON test_auto_lexer(content_text)
INDEXTYPE IS ctxsys.context
PARAMETERS ('datastore ctxsys.direct_datastore filter ctxsys.null_filter lexer auto_lexer1')
select to_char(content_Text) from test_auto_lexer where contains(content_text,
'<query>
<textquery lang="ger" grammar="context">
$fahren
</textquery>
<score datatype="integer"/>
</query>') > 0
this doesnt work even after changing the session language. My default Sesson language is AMERICAN.
Could any one help me with this, in case I am missing something here. I would be really thankful.
Edited by: Nagendra Prasad on Jan 23, 2010 12:05 AMIn the future, please begin a new thread for a new question and provide a link to a related question.
According to the online documentation, Oracle only supports stemming for English, Dutch, French, German, Italian, Spanish, and Japanese. Oracle does not support Russian stemming, although you may have gotten some accidental results, due to identifying it as a different language and applying stemming rules for that language. The following manual sections show the languages available for the index_stems attribute of the basic_lexer and stemmer attribute of the basic_wordlist:
Basic_lexer attributes:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#CIHHBAAD
Basic_wordlist attributes:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#g1019326
Also, please see the following note:
Features not available in 11.2.0.3:
http://docs.oracle.com/cd/E11882_01/readmes.112/e22488/toc.htm#BABDGGDB
"Certain Oracle Text functionality based on third-party technologies, including AUTO_LEXER and CTX_ENTITY, have been disabled in this release (reference Bug 12618046). For BASIC_LEXER, the usage of the INDEX_STEMS attribute values that depend on third-party technologies, is also affected. If this impacts an existing application, contact Oracle Support Services for guidance."
Also, the auto_lexer has been replaced by the world_lexer, which only has one attribute:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#BHCJEGFJ
I don't work for Oracle, so I don't know why they do things the way they do.
So, you need to stick with the basic_wordlist for stemming, not the lexers. However, you may get better performance by combining the multi_lexer with the basic_wordlist, as the multi_lexer eliminates time spent on automatic language detection. But, you need to remember not to use the index_stems with your lexer, since it will conflict with the wordlist. I am not experiencing any time problems as you have. Please see the demo below. I have provided the whole script below that, so that you can reproduce it on your system. If you still have problems, then it may be due to differences in versions.
-- demo:
SCOTT@orcl_11gR2> select * from v$version
2 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
5 rows selected.
SCOTT@orcl_11gR2> select value from v$nls_parameters
2 where parameter = 'NLS_CHARACTERSET'
3 /
VALUE
AL32UTF8
1 row selected.
SCOTT@orcl_11gR2> DROP TABLE news
2 /
Table dropped.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> CREATE TABLE news
2 (pkey NUMBER,
3 lang VARCHAR2 (2),
4 short_content CLOB)
5 /
Table created.
SCOTT@orcl_11gR2> INSERT ALL
2 INTO news (pkey, lang, short_content)
3 VALUES (1, 'en', 'I drive a bike.')
4 INTO news (pkey, lang, short_content)
5 VALUES (2, 'en', 'I drove a bike.')
6 INTO news (pkey, lang, short_content)
7 VALUES (3, 'en', 'I have driven a bike.')
8 INTO news (pkey, lang, short_content)
9 VALUES (4, 'en', 'I always drive a car')
10 INTO news (pkey, lang, short_content)
11 VALUES (5, 'en', 'This is nothing')
12 INTO news (pkey, lang, short_content)
13 VALUES (6, 'de', 'Ich fahre ein Fahrrad.')
14 INTO news (pkey, lang, short_content)
15 VALUES (7, 'de', 'Ich fuhr ein Fahrrad.')
16 INTO news (pkey, lang, short_content)
17 VALUES (8, 'de', 'Ich habe ein Fahrrad gefahren.')
18 INTO news (pkey, lang, short_content)
19 VALUES (9, 'de', 'Ich habe immer ein Auto fahren.')
20 INTO news (pkey, lang, short_content)
21 VALUES (10, 'de', 'Es ist nichts.')
22 SELECT * FROM DUAL
23 /
10 rows created.
SCOTT@orcl_11gR2> BEGIN
2 -- word list:
3 ctx_ddl.create_preference ('my_wordlist', 'basic_wordlist');
4 ctx_ddl.set_attribute ('my_wordlist', 'stemmer', 'auto');
5 -- english lexer:
6 ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
7 -- german lexer:
8 ctx_ddl.create_preference ('german_lexer', 'basic_lexer');
9 ctx_ddl.set_attribute ('german_lexer', 'composite', 'german');
10 ctx_ddl.set_attribute ('german_lexer', 'alternate_spelling', 'german');
11 ctx_ddl.set_attribute ('german_lexer', 'mixed_case', 'no');
12 ctx_ddl.set_attribute ('german_lexer', 'base_letter', 'yes');
13 -- multi_lexer:
14 ctx_ddl.create_preference ('global_lexer', 'multi_lexer');
15 ctx_ddl.add_sub_lexer ('global_lexer', 'default', 'english_lexer');
16 ctx_ddl.add_sub_lexer ('global_lexer', 'german', 'german_lexer');
17 END;
18 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> create index search_news
2 on news (short_content)
3 indextype is ctxsys.context
4 parameters
5 ('lexer global_lexer
6 language column lang
7 wordlist my_wordlist')
8 /
Index created.
SCOTT@orcl_11gR2> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> COLUMN short_content FORMAT A30
SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
2 /
Session altered.
SCOTT@orcl_11gR2> set timing on
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$drive') > 0
3 /
PKEY LA SHORT_CONTENT
1 en I drive a bike.
2 en I drove a bike.
3 en I have driven a bike.
4 en I always drive a car
4 rows selected.
Elapsed: 00:00:00.05
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$drove') > 0
3 /
PKEY LA SHORT_CONTENT
1 en I drive a bike.
2 en I drove a bike.
3 en I have driven a bike.
4 en I always drive a car
4 rows selected.
Elapsed: 00:00:00.05
SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
2 /
Session altered.
Elapsed: 00:00:00.01
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$fahr') > 0
3 /
PKEY LA SHORT_CONTENT
6 de Ich fahre ein Fahrrad.
7 de Ich fuhr ein Fahrrad.
8 de Ich habe ein Fahrrad gefahren.
9 de Ich habe immer ein Auto fahren
4 rows selected.
Elapsed: 00:00:00.07
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$fuhr') > 0
3 /
PKEY LA SHORT_CONTENT
6 de Ich fahre ein Fahrrad.
7 de Ich fuhr ein Fahrrad.
8 de Ich habe ein Fahrrad gefahren.
9 de Ich habe immer ein Auto fahren
4 rows selected.
Elapsed: 00:00:00.16-- script for you to reproduce the demo on your system:
select * from v$version
select value from v$nls_parameters
where parameter = 'NLS_CHARACTERSET'
DROP TABLE news
EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
CREATE TABLE news
(pkey NUMBER,
lang VARCHAR2 (2),
short_content CLOB)
INSERT ALL
INTO news (pkey, lang, short_content)
VALUES (1, 'en', 'I drive a bike.')
INTO news (pkey, lang, short_content)
VALUES (2, 'en', 'I drove a bike.')
INTO news (pkey, lang, short_content)
VALUES (3, 'en', 'I have driven a bike.')
INTO news (pkey, lang, short_content)
VALUES (4, 'en', 'I always drive a car')
INTO news (pkey, lang, short_content)
VALUES (5, 'en', 'This is nothing')
INTO news (pkey, lang, short_content)
VALUES (6, 'de', 'Ich fahre ein Fahrrad.')
INTO news (pkey, lang, short_content)
VALUES (7, 'de', 'Ich fuhr ein Fahrrad.')
INTO news (pkey, lang, short_content)
VALUES (8, 'de', 'Ich habe ein Fahrrad gefahren.')
INTO news (pkey, lang, short_content)
VALUES (9, 'de', 'Ich habe immer ein Auto fahren.')
INTO news (pkey, lang, short_content)
VALUES (10, 'de', 'Es ist nichts.')
SELECT * FROM DUAL
BEGIN
-- word list:
ctx_ddl.create_preference ('my_wordlist', 'basic_wordlist');
ctx_ddl.set_attribute ('my_wordlist', 'stemmer', 'auto');
-- english lexer:
ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
-- german lexer:
ctx_ddl.create_preference ('german_lexer', 'basic_lexer');
ctx_ddl.set_attribute ('german_lexer', 'composite', 'german');
ctx_ddl.set_attribute ('german_lexer', 'alternate_spelling', 'german');
ctx_ddl.set_attribute ('german_lexer', 'mixed_case', 'no');
ctx_ddl.set_attribute ('german_lexer', 'base_letter', 'yes');
-- multi_lexer:
ctx_ddl.create_preference ('global_lexer', 'multi_lexer');
ctx_ddl.add_sub_lexer ('global_lexer', 'default', 'english_lexer');
ctx_ddl.add_sub_lexer ('global_lexer', 'german', 'german_lexer');
END;
create index search_news
on news (short_content)
indextype is ctxsys.context
parameters
('lexer global_lexer
language column lang
wordlist my_wordlist')
EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
COLUMN short_content FORMAT A30
ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
set timing on
select * from news
where contains (short_content, '$drive') > 0
select * from news
where contains (short_content, '$drove') > 0
ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
select * from news
where contains (short_content, '$fahr') > 0
select * from news
where contains (short_content, '$fuhr') > 0
/ -
Cascading Select Lists - Not Working for me
I am trying to implement Denes Kubicek's Ajax Cascading Select List solution.
http://apex.oracle.com/pls/otn/f?p=31517:119
But it is not working for me.
I'm a newbie to APEX and checked the forum for advice on cascading select lists. I saw the thread for
"Cascading Select Lists - Not Working" posted by sue and the replies by Varad Acharya, but I'm still
having issues of not seeing the alerts, not able to run the pl/sql process in SQL Workshop, and not
getting the expected results.
I have a list of countries (US - USA, CA - CANADA, etc.) and a list of states for each country. When a
user selects a country I would like to show the list of states within that country.
This is what I've done so far:
Defined an application process:
Process Point: On Demand: Run ... by a page process.
Name: CASCADING_SELECT_LIST1
Process Text:
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<select>');
HTP.prn ('<option value="' || 99 || '">' || '- All States -'
|| '</option>'
FOR c IN (SELECT state_code || ' - ' || state_desc d, state_code r
FROM tbk_state
WHERE country_code = :cascading_selectlist_item_1)
LOOP
HTP.prn ('<option value="' || c.r || '">' || c.d || '</option>');
END LOOP;
HTP.prn ('</select>');
END;
defined and application item:
Name: CASCADING_SELECTLIST_ITEM_1
Build Option: - No Build Option -
Created a 'Form on a table with report' as follows:
Page 5: Report on TBK_HARDWARE_LOCATION
Page 6: Form on TBK_HARDWARE_LOCATION
in HTML Header of the page attributes for 'Form on TBK_HARDWARE_LOCATION' I have:
<script language="JavaScript" type="text/javascript">
<!--
htmldb_delete_message='"DELETE_CONFIRM_MSG"';
//-->
</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue)
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
On Page 6: 'Form on TBK_HARDWARE_LOCATION' I have the following items (plus some others):
Name: P6_COUNTRY_CODE
Display as: Select List
HTML Form Element Attributes: onchange="get_select_list_xml1(this,'P6_STATE_CODE');"
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: COUNTRY_CODE
Named LOV: LIST OF COUNTRIES
Name: P6_STATE_CODE
Display as: Select List
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: STATE_CODE
Named LOV: - Select named LOV -
List of Values definition:
select state_code || ' - ' || state_desc d, state_code r
from tbk_state
where country_code = :P6_COUNTRY_CODE
order by 1
LIST OF COUNTRIES is defined as:
select country_code || ' - ' || country_desc d, country_code r
from tbk_country
order by 1
Now to the problem:
I run page 5 (the report) to see the list of locations and then I try to edit a record (page 6). When I
try to select a different country I get the following error (on IE):
"Problems with this web page might prevent it from being displayed properly or functioning properly.
In the future, you can display this message by double-clicking the warning icon displayed in the status
bar.
Line: 17
Char: 5
Error: Object expected
Code: 0
URL: http//cmrac4.cm.timeinc.com:7777/pls/htmldb/f?
p=114:6:1413254636072443110::::P6_HARDWARE_LOCATION_ID:2
I don't see any of the alert messages.
I also tried to run the application process code in the SQL - Command Processor (I replaced
:cascading_selectlist_item_1 with 'CA' or 'US') and got the following:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh
button, or try again later.
Only one top level element is allowed in an XML document. Error processing resource
'http://cmrac4.cm.timeinc.com:7777/pls/...
<select><option value="99">- All States -</option><option value="X1">X1 - X1</option><optio...
Can someone help me please?Varad,
First, thank you for taking the time to try to help me with this problem.
When I view the page's source code (here are the first few lines):
<html lang="en-us">
<head>
<script src="/i/javascript/core.js" type="text/javascript"></script>
<link rel="stylesheet" href="/i/css/core.css" type="text/css" />
<script language="JavaScript" type="text/javascript">
<!--
htmldb_delete_message='Would you like to perform this delete action?';
//-->
</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
//alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
//alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue);
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
It looks like line 17 is:
var l_Select = html_GetElement(pSelect);
I'm still not sure why I'm getting this error and why it's not working?
Thanks,
Eti -
SSO is not working for SAPGUI for HTML
Hi Experts,
We have configured SSO between EP and ECC.SSO is working fine for SAPGUI for windows.But it is not working for SAPGUI for HTML.
Workflow iViews are getting error.
"SWITCH to HTTPS does not occur."
The domain names are different for EP and ECC.
Please let me know ,is there any settings need to check.
Regards,
Bala.Hi
The point here is that your Portal server is on a different domain, so you have to configure the logon ticket issuer (portal) to generate logon ticket for multiple domains.
http://help.sap.com/saphelp_nw04s/helpdata/en/a0/88a340fa432b54e10000000a1550b0/frameset.htm
Best regards
Johann -
I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???
Static_Unit
I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
Don't Have Serial Number for Premiere, Only Photoshop?
Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
Thanks.
ATR -
Hi All
Do you know why this behaviour different for subtitution written under cost center accounting.
We have written substitution using coding block table. Logic of substitution is in case of any GL maintained in a set is being used for posting , then we will replace the cost center with profit center vlaue. Reason being we have same naming convention for Cost center and Profit center.
Thanks
SoniaHi,
MB1B is t-code for stock transfer posting.
Stock transfer posting generate FI document using balance sheet account, not P&L account.
Because you don’t create cost elements using balance sheet accounts related to stock, I think that Substitution written under cost center accounting is not working for tcode MB1B is right. -
Transaction launcher not working for custom business role
Hi Experts,
I am facing a very weird problem where the transaction laucher define for BOR transaction is working for one business role(Z business role Customized one) but its not working for other business role (Z business role).
to emphasize further we have the code:-
case ls_attributes-object_type.
when lc_z23 or lc_z25.
lv_logical_link = lc_ZITISU.
when lc_BUS2000115.
lv_logical_link = lc_ZITERP1.
when others.
lv_logical_link = lc_ZITERP2.
endcase.
l_if_navigation = cl_crm_ui_navigation_service=>get_instance( me ).
IF l_if_navigation IS BOUND .
Navigate to transaction launcher using link id
l_if_navigation->navigate( iv_link_id = lv_logical_link ).
ENDIF.
in this the logical link is is lc_ZITISU whenever this BSP application is called from both the business roles but in one the window opens up for BOR transaction whereas when we login again using different business role the code is the same as given above. I mean the sam logical link id is used and navigated to but window is not opening for transaction launcher as it happens for the previous business role.
Request your help to resolve this issue.
Thanks,
RajwinHi,
I tried by applying the PFCG role id of business role which was working to the business role id of the one for which it wasn't working and then try testing whether the transaction launcher is triggering. But the transaction launcher screen is still not opening even after doing this.
Probably there's something else too which is causing the problem. Request your inputs on this,
Thanks,
Rajwin
Maybe you are looking for
-
Hi I have placed figures to its nearest citations in non XML workflow. For XML workflow, I have placed figure and its captions in two frames and grouped them. I move the group to the corresponding citation page. My xml structure remains unchanged. No
-
Trying to install InDesign CS3 on a new PC with Windows 8.1.
I downloaded the Installer for CS3 and used the original disks. It appeared to successfully download but would not run. As mine was an upgrade version I did an Upgrade Check but could not get beyond the information required for a qualifying product
-
Firefox keeps my site from automaticly loading
I have a site for the fire dept that shows the members when they login. but firefox wont let it show new entry's unless I hit allow.
-
Hello, I have Nokia 6233 v5.10 with 1GB Lexar microSD card. I've noticed that some of the images I've taken(and maybe this applies to all kinds of files) get corrupted after some time(it's not in the moment of shooting but at a later time). What's ca
-
How to manage search engines in Firefox 34.0.5???
I have been using Firefox for sometime now but the latest version has messed up the search bar. I have already seen quite a few posts related to this but no of them fix my current problem. I use and addon called 'add to search' it allows me to take s