Translation Changes After Patching 9.3.1

Has anyone experienced any changes in the way the translation process runs in patched 9.3.1 versions? I may be going crazy, but it seems like something is working differently after we went from basic 9.3.1.0 to 9.3.1.4. For example, we don't look at translations too much, but it seems they used to kind of calc on the fly. Now, we see the translated results only after a consolidation (or translate/force translate call).
Also, it seems the translation is only working one way. We get results for converting EUR to USD, however, we don't get anything for USD back to EUR anymore even after a consolidation (unless we run a translate/force translate, in which case it works fine).
Of note, we haven't changed any rules in many years, and we've always only entered the fx rate to convert EUR to USD. All parent entities are USD.
Thanks- maybe I'm just going nuts and remembering wrong.

9.3.1.4.13 addresses some translation issues. Patch number 9086805

Similar Messages

Behaviour change of synchronous reply after patching to 10.1.3.4

Hi people ,
i have a process like this:
[http://www.jettmedia.com/images/630_syncReply10134Test.jpg]
Normally in 10.1.3.1 , 10.1.3.3.x ; the process will continue after a partial reply, and any fault uncatched in the process would terminate the flow. And any changes to the outputvariable wont change the process response.
But after patching to 10.1.3.4 im having a different behaviour on synchronous process replys ,
The process continues and any uncatched fault AFTER A REPLY its raised to the client, and any change to the outputvariable AFTER A REPLY its changed to the process response .
The worst thing its that is not clear when the response its really sent to the client , ( if i put a wait activity , after the reply, with 1 minute , works as was expected, like in 10.1.3.3 ... )
I read this new features list from oracle
http://www.oracle.com/technology/tech/soa/cab/oraclesoacab-webinar-04-22-08bpel_10_1_3_4_update.pdf
It says that "Faults in a transient process go to the client" , correcting an old problem of lost instances..
I cant find any other documentation explaining this new beahaviour but for my organization its a huge problem afecting , many production processes, on the patched servers. Because i raised faults to leave the instances marked as faulted on the console as a normal procedure on the flows , but now , if that throw its close enough after a reply(with a unknow criteria or number of activities) its raised to the client :S
Thanks for any help , by now the workaround to keep the same behaviour its: WAIT after every reply :S :S !!
Greetings
Dam

Yes its a fire and forget pattern, thanks for the suggestion, il. try it ...
but its difficult to refactor several flows just for patching , you have any idea if this change after upgrade to 10.1.3.4 its normal ? this is an expected beahaviour ?
Thank you very much again

No sound after patch change

Hi, I was just about to programming patches for my live setup. I use a master keyboard with three foot switches - one for step forward through the patches - one for step backward - one for different functions. Until now I have programmed 14 patches - in most cases I use one patch for one song. But one song need two patches - one for different sounds and one patch for the solo. These both patches are organized in a set. The second patch have two layered sounds and a third sound wich is layered if I press and hold the third foot switch.
These switch controls the mute function of the third channel. If I press the foot switch, the channel is on and muted if I released these switch.
Now the situation: After I have ready the two patches I checked out this. I played the first patch released the keys - changed to the second patch - played the solo part - there is a little pause so I can press the foot switch to unmuted the third channel (it is muted in the base setting).
All is ok - the solo is over I released the switch and the keys and then I pressed the second foot switch to change to the previous patch and suddenly there was no sound.
And now these failure is at all times if I change from one patch to an other. And very curious - this problem concerns the exs sampler only. After I press the panic button all is ok. If I change the patch by the foot switch or the other possibilities again - no sound from exs sampler until I press the panic button again.
Have anyone an idea what is the reason for this failure?
Thanks

Thanks for the tip... good to know. The weird part is that the only MIDI I'm using is the footswitch to change patches. As much as I love the interface of MS and the flexibility to use some Logic effects along with Guitar Rig, I can't see using MS live at this point. At best my guitar will drop out a few times as I switch patches, and then I can recover it with a footswitch pedal that I will have to dedicate to PANIC instead of triggering an effect or something else useful.
I really hope the stability of this app improves, it's so much nicer than using Guitar Rig's standalone app, but at least the GR standalone doesn't drop out randomly when switching patches.
I wonder if this is just a MIDI issue or something bigger within MS. I read a post on Logic Pro Help that said to try the following to deal with MIDI problems...
"My issue was Completely solved by tossing an EmaginUSBmidi driver.
HD>Library>Audio>Midi Drivers."
I might give it a shot before I shelve MS until the next update.

After patching XI system to SP14, disp+work not running

Hi All,
We have finished XI installation, then we also patching it from SP9->SP14 NW04s SR2. it works ok in SP9, but when we completed patching.
then when we start XI, it runs for 3-4mins, then disp+work in MMC stops.
following is the developer trace. pls help
Hardware: NT 2003 server. 3G cpu, 2G memory, 10G virtual memory
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        HXI
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    133
intno      20050900
make:      multithreaded, Unicode, optimized
pid        2732
Mon Feb 25 15:27:35 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2732) [dpxxdisp.c   1239]
     shared lib "dw_xml.dll" version 133 successfully loaded
     shared lib "dw_xtc.dll" version 133 successfully loaded
     shared lib "dw_stl.dll" version 133 successfully loaded
     shared lib "dw_gui.dll" version 133 successfully loaded
     shared lib "dw_mdm.dll" version 133 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Feb 25 15:27:41 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >CDCXI_HXI_00                            <
DpShMCreate: sizeof(wp_adm)          18672     (1436)
DpShMCreate: sizeof(tm_adm)          4270848     (21248)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1544)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 06D30040, size: 4930904)
DpShMCreate: allocated sys_adm at 06D30040
DpShMCreate: allocated wp_adm at 06D32090
DpShMCreate: allocated tm_adm_list at 06D36980
DpShMCreate: allocated tm_adm at 06D369B0
DpShMCreate: allocated wp_ca_adm at 071494B0
DpShMCreate: allocated appc_ca_adm at 0714F270
DpShMCreate: allocated comm_adm at 071511B0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 071D2070
DpShMCreate: allocated gw_adm at 071D20B0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 071D20E0
DpShMCreate: allocated wall_adm at 071D20E8
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Mon Feb 25 15:27:42 2008
J2EE server info
start = TRUE
state = STARTED
pid = 3016
argv[0] = C:\usr\sap\HXI\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\HXI\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\HXI\SYS\profile\HXI_DVEBMGS00_CDCXI
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=HXI
argv[7] = -DSAPMYNAME=CDCXI_HXI_00
argv[8] = -DSAPPROFILE=C:\usr\sap\HXI\SYS\profile\HXI_DVEBMGS00_CDCXI
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
Mon Feb 25 15:27:43 2008
***LOG Q0K=> DpMsAttach, mscon ( CDCXI) [dpxxdisp.c   11799]
DpStartStopMsg: send start message (myname is >CDCXI_HXI_00                            <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Mon Feb 25 15:27:44 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 133
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Mon Feb 25 15:27:53 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4361]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1460
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1177) [nixxi.cpp    4361]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3016)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Feb 25 15:28:23 2008
ERROR => DpHdlDeadWp: W0 (pid 3116) died [dpxxdisp.c   14507]
ERROR => DpHdlDeadWp: W1 (pid 3104) died [dpxxdisp.c   14507]
ERROR => DpHdlDeadWp: W2 (pid 3072) died [dpxxdisp.c   14507]
ERROR => DpHdlDeadWp: W3 (pid 3148) died [dpxxdisp.c   14507]
ERROR => DpHdlDeadWp: W4 (pid 3140) died [dpxxdisp.c   14507]
ERROR => DpHdlDeadWp: W5 (pid 3120) died [dpxxdisp.c   14507]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W6 (pid 3096) died [dpxxdisp.c   14507]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W7 (pid 3092) died [dpxxdisp.c   14507]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W8 (pid 3136) died [dpxxdisp.c   14507]
ERROR => DpHdlDeadWp: W9 (pid 3080) died [dpxxdisp.c   14507]
ERROR => DpHdlDeadWp: W10 (pid 3172) died [dpxxdisp.c   14507]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W11 (pid 3164) died [dpxxdisp.c   14507]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W12 (pid 3204) died [dpxxdisp.c   14507]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:33 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Mon Feb 25 07:28:33 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA     3116 Ended         no      1   0        0
1 DIA     3104 Ended         no      1   0        0
2 DIA     3072 Ended         no      1   0        0
3 DIA     3148 Ended         no      1   0        0
4 DIA     3140 Ended         no      1   0        0
5 DIA     3120 Ended         no      1   0        0
6 UPD     3096 Ended         no      1   0        0
7 ENQ     3092 Ended         no      1   0        0
8 BTC     3136 Ended         no      1   0        0
9 BTC     3080 Ended         no      1   0        0
10 BTC     3172 Ended         no      1   0        0
11 SPO     3164 Ended         no      1   0        0
12 UP2     3204 Ended         no      1   0        0
Dispatcher Queue Statistics               Mon Feb 25 07:28:33 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          12
wake_evt_udp_now     0
wake events           total     8, udp     7 ( 87%), shm     1 ( 12%)
since last update     total     8, udp     7 ( 87%), shm     1 ( 12%)
Dump of tm_adm structure:               Mon Feb 25 07:28:33 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Mon Feb 25 07:28:33 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:38 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >CDCXI_HXI_00                            < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2992) (SOFT_KILL)
Stop icman
killing process (2968) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2992 HANDLE:1556)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:39 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2992 HANDLE:1556)
wait for end of icman
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:40 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:41 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:42 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:43 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:44 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:45 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:46 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:47 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:48 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:49 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:50 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2968 HANDLE:1560)
[DpProcDied] Process died (PID:3016 HANDLE:1540)
DpStartStopMsg: send stop message (myname is >CDCXI_HXI_00                            <)
NiIMyHostName: hostname = 'CDCXI'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Feb 25 15:28:51 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12145]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1484 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1484 (pos=3)
SiSelNRemove: removed sock 1484
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1484
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2732) [dpxxdisp.c   10417]
Good Bye .....

Yes, I have, following is dev_w0, thank you in advance.
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Mon Feb 25 15:40:12 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\HXI\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'C:\usr\sap\HXI\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'C:\usr\sap\HXI\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.115)
B New connection 0 created
M sysno      00
M sid        HXI
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    133
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        2052
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2052) [dpxxdisp.c   1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          18672     (1436)
M DpShMCreate: sizeof(tm_adm)          4270848     (21248)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm)          528064     (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)          0     (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1544)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 06D30040, size: 4930904)
M DpShMCreate: allocated sys_adm at 06D30040
M DpShMCreate: allocated wp_adm at 06D32090
M DpShMCreate: allocated tm_adm_list at 06D36980
M DpShMCreate: allocated tm_adm at 06D369B0
M DpShMCreate: allocated wp_ca_adm at 071494B0
M DpShMCreate: allocated appc_ca_adm at 0714F270
M DpShMCreate: allocated comm_adm at 071511B0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 071D2070
M DpShMCreate: allocated gw_adm at 071D20B0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 071D20E0
M DpShMCreate: allocated wall_adm at 071D20E8
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X
X Mon Feb 25 15:40:13 2008
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host CDCXI
M
M Mon Feb 25 15:40:14 2008
M calling db_connect ...
C Prepending C:\usr\sap\HXI\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@HXI on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   073217F8   07326E94   0732671C
C Attaching to DB Server HXI (con_hdl=0,svchp=07326668,srvhp=07338264)
C
C Mon Feb 25 15:40:15 2008
C *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12541
[dboci.c      4313]
C *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c    11044]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@HXI on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   073217F8   07326E94   0732671C
C Detaching from DB Server (con_hdl=0,svchp=07326668,srvhp=07338264)
C Attaching to DB Server HXI (con_hdl=0,svchp=07326668,srvhp=07338264)
C
C Mon Feb 25 15:40:16 2008
C *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12541
[dboci.c      4313]
C *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c    11044]
B ***LOG BY2=> sql error 12541 performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error 12541 performing CON [dblink#5 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dblink#5 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10380]
M
M Info for wp 0
M
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    req.vm = no VM
M    attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server CDCXI_HXI_00 on host CDCXI (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Mon Feb 25 15:40:16 2008
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10585
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2052) [dpnttool.c   327]

Function module "GM_DOCUMENT_REVERSE" not found. after Patch Update

Hi Abapers/Basis
After patch update i am not able to do FBCJ reversal entry getting below error message.
Runtime Errors         CALL_FUNCTION_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          25.05.2011 14:43:26
Short text
     Function module "GM_DOCUMENT_REVERSE" not found.
What happened?
     The function module "GM_DOCUMENT_REVERSE" is called,
     but cannot be found in the library.
     Error in the ABAP Application Program
     The current ABAP program "SAPLRWCL" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
     not caught in
    procedure "CALL_DISPATCHER_STORNO_R" "(FORM)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The program "SAPLRWCL" contains the CALL FUNCTION statement.
    The name of the function module to be called is "GM_DOCUMENT_REVERSE".
    No function module exists with the name "GM_DOCUMENT_REVERSE".
    All function modules are listed in the Function Library (SE37).
    Possible reasons:
    a) Wrong name specified. Pay particular attention to
       upper/lower case and underscores ("_").
       or
    b) Transport error
    c) In the case of an enqueue/dequeue module,
       the lock object may not have been activated
       (ABAP/4 Dictionary).
How to correct the error
    Check the last transports to the SAP System.
    Is the program "SAPLRWCL" currently being changed?
    If an enqueue/dequeue module is involved, is the activation
    of the lock object missing in the ABAP/4 Dictionary?
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "CALL_FUNCTION_NOT_FOUND" "CX_SY_DYN_CALL_ILLEGAL_FUNC"
    "SAPLRWCL" or "LRWCLF10"
    "CALL_DISPATCHER_STORNO_R"
    Function modules with names similar to "GM_DOCUMENT_REVERSE":
    GM_DOCUMENT_CLOSE
    GM_DOCUMENT_RECORD
    GM_DOCUMENT_DELETE
    GM_DOCUMENT_POST
    GM_DOCUMENT_CHECK
    G_DOCUMENT_RECORD
    GJ_DOCUMENT_RECORD
    GM_DOCUMENT_PROJECT
    GET_DOCUMENTS
    GM_DOCUMENT_DISPLAY
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
   To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
   Display the system log by calling transaction SM21.
   Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
Moderator message: please don't just dump your dumps, search for SAP notes or open a call with SAP instead.
Edited by: Thomas Zloch on May 25, 2011 2:16 PM

Hi Karthik,
Thank you for ur reply.
I did not implement any user exit/ badi. Dump is saying that my smarform function module does not exist in the se37 library.
I have excuted my form through se38, that time is working fine. When i tried through output type it is going to dump.
Regards,
Kusuma.

Error while running isupplier portal from jdev after patches

latest POS rollup patch was applied and since then i get an error on local machine while running portal pages, need not mention that my substitution has also broken after patches.
On server :
login as isupplier > click on any PO either on home page or any order via Orders> ponumber
On local machine : I get below error when I click on any po.
I have deleted all teh old classes and ftped the whole apps directory on my local machine, but i still get this error.
Also noted that the functionality of changing PO, etc works fine, but this error gets printed in jdev console.
can someone give me some clue ?
thanks
java.lang.ClassCastException
     at oracle.apps.pos.isp.server.PosServerUtil.checkSecurePO(PosServerUtil.java:85)
     at oracle.apps.pos.changeorder.webui.ViewOrderPGCO.processRequest(ViewOrderPGCO.java:1012)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:587)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processRequest(OAStackLayoutBean.java:350)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processRequest(OAStackLayoutBean.java:350)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1136)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2335)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1734)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
     at OA.jspService(OA.jsp:34)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
     at com.evermind.server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:189)
     at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:199)
     at OA.jspService(OA.jsp:39)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)
Edited by: OAF-dev on Apr 19, 2010 1:39 PM

I cross checked all the versions and I have the correct one installed....
it was working before the patch . Patch is only the upgrade of POS. I got all teh class files again on my local machine , but this error comees up in jdev console. and rest all works fine. I have no clue why.

Sales office data missing after patching in CRM

Hi,
We have CRM 4.0 for internet sales.
Recently, we patched our Development and QA CRM systems from SAPKU40009 to
SAPKU40016.
Immediately after the patching, we see that the Sales office information in the BP (Sales area- organization tab) is missing. We have only one Sales org and Dist channel with division not active. All the sales office belong to the same sales org. Nothing has changed w.r.t org model before and after patching and all the org units are checked for determintation.
Everything was working before the patching. Just after patching, we find the sales office information blanked out in the BP and as well as the drop down list is empty.
I can see the sales office table entries for all the BPs in CRMM_BUT_SET0140. But when ichange the BP data (for some other field) and save, the table entries get deleted as i am not able to assign the sales office any more.
We have not buffered the attributes. I tried that also and ran the report HRBCI_ATTRIBUTES_BUFFER_UPDATE, but it is of no use.
Can somebody help?
Thanks
Shankar

Hi ,
What you can do is,
Create a request for a material whose Sales Area data is missing in
CRM , and perform the request load in transaction:R3AR4.
And please check whether sales area data flows to CRM.
Put a filter in txn:R3AC1, to download single material or material
range.And before performing an initial load in txn:R3AS,please make
sure that sales area data is missing in CRM.Now, perform the initial
load in txn:R3AS.And please check whether sales area data flows to
CRM.
Check the filter settings in transaction R3AC1 for
object MATERIAL and please make sure that it would bring down all
the expected materials from R/3 along with the sales area data. I guess there is some
filter setting which is blocking it.
Please check the entries you have maintained in table MVKE - the entries
for the sales data maintained here must match with the ones maintained in the
filters.
thanks & regards,
Krishnen
Edited by: Krishnen Subramanian on Aug 9, 2011 8:47 AM

After patching Portal 7.31 SP9 - SP13, CM BW reports fail

Our links to the BI credit reports (like Early Warning Risk) stopped working after patching the NW Portal 7.31 from SP9 to SP13. No other changes were made, and the reports worked prior to the patching.
The child window for the report opens, but then comes back with error:
com.sap.portal.appintegrator.sap.BWReport::BWReport/AskForReport
And then it asks for a BEx Web Application Query String.
I would put this in the portal/netweaver forum, but this error seems strictly related to the CM delivered content (we are on the most current 1.41 BP). We've validated that that the SSO tickets from portal to back end ERP and BI are working properly. Has anyone had this kind of issue after a patch (while staying on same portal release)? We didn't make any changes/patches to the back end ERP and BI systems either.

Yes we have experienced the same thing. We upgraded from 30 to 353 and now we are getting the BW logon prompt. It is very frustrating. I have been searching these message boards for help.
Brien

Ciscowork3.2.1 daemon manager is not working after patch installation

Ciscowork 3.2.1 daemon manager is not working after patch installation
Hi Team
Ciscowork 3.2.1 daemon manager is not working after patch installation.
C:\Documents and Settings\Administrator>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
Also I checked syslog.log and it is showing below error
an 17 14:39:34 127.0.0.1 100: <28> dmgt[1316]: 2507(W):Daemon manager anonymous user has not been set up: 00000569
I reset the casuser password and restarted the service but still no luck....
Please suggest.
With Regards,
neena

Neena,
Check the properties of casuser under Start > Settings > Control Panel > Administrative Tools > Computer Management > Local Users and Groups > Users and make sure it is not disabled or locked out. The only thing checked should be "Password never expires". Change anything required and reset casuser.

Apache cores after patching Solaris 10

Hi Folks,
after patching Solaris 10 with the recommended Patch Cluster i'm not able to start Apache with apachectl sslstart.
Apache cores! Changing <VirtualHost default:443> to <IP-Addr.:443> in ssl.conf solves the problem.
Any idea why?
Ciao
M. Garcia

Hi Folks,
after patching Solaris 10 with the recommended Patch Cluster i'm not able to start Apache with apachectl sslstart.
Apache cores! Changing <VirtualHost default:443> to <IP-Addr.:443> in ssl.conf solves the problem.
Any idea why?
Ciao
M. Garcia

After patch upgrade in 11g Not able to see current patch

Hi Experts,
After upgrading the patch upgrade through MOPatch from 11.2.0.2.0 to 11.2.0.2.4 , I can see the log as succeeded .
But when I am connecting through sqlplus / as sysdba the version is still showing as 11.2.0.2.0 . Have I missed something I used the readme file README_201111_AIX which is downloaded with this patch.
I have to also add one more fix_control after patch upgrade that means system is reading the right patch. So, Please suggest how to check this .
Thanks in Advance.

Hi,
My output is :-
Oracle Database 11g                                                  11.2.0.2.0
There are 1 products installed in this Oracle Home.
and also I can see the following that today these much patches installed successfully I am giving some example below :-
Patch 10149919     : applied on Thu Dec 08 05:22:25 EST 2011
Unique Patch ID: 14146533
   Created on 3 Oct 2011, 00:42:46 hrs PST8PDT
   Bugs fixed:
     10149919
   This patch overlays patches:
     12827726
   This patch needs patches:
     12827726
   as prerequisites
Patch 10188865     : applied on Thu Dec 08 05:22:11 EST 2011
Unique Patch ID: 13551988
   Created on 21 Mar 2011, 03:16:39 hrs PST8PDT
   Bugs fixed:
     10188865
Patch 10190759     : applied on Thu Dec 08 05:21:56 EST 2011
Unique Patch ID: 13109839
   Created on 11 Nov 2010, 20:29:55 hrs UTC
   Bugs fixed:
     10190759
Patch 10243045     : applied on Thu Dec 08 05:21:45 EST 2011
Unique Patch ID: 13169052
   Created on 23 Nov 2010, 02:40:01 hrs PST8PDT
   Bugs fixed:
     10243045
Patch 10357961     : applied on Thu Dec 08 05:21:38 EST 2011
Unique Patch ID: 13814186
   Created on 6 Jun 2011, 06:16:52 hrs PST8PDT
   Bugs fixed:
     10357961
But if the patches applied is 11.2.0.2.0 will not change to 11.2.0.2.4 or it will only change after applying patchset.
Thanks in advance.

Loss of settings after Patch 8398280

The reports by Scheduler are erroring out after Patch 8398280. Patch readme explains you have to restore the xmlp-server-config.xml
after deploying the patch. Customer indicates they followed instructions.
What parameter\set of parameters should they change to resolve the issue?
What parameter files does patch replace?

No iTunes content on your iPhone is included with your iPhone's backup - no music, movies, tv shows, podcasts, or 3rd party apps. And the same for all photos transferred from your computer. All iTunes content on your iPhone should be in your iTunes library on your computer and all photos transferred from your computer to your iPhone should remain on your computer. Both can be re-transferred to your iPhone.
This link provides the data that is included with your iPhone's backup, which is updated by iTunes as the first step during the iTunes sync process.
http://support.apple.com/kb/HT1766
When restoring an iPhone with iTunes, the iPhone is completely erased first followed the firmware being re-installed. After the firmware is re-installed, you have two options. Restoring from your iPhone's backup which is the default selection, or as a new iPhone or not from your iPhone's backup which must be manually selected. After either one, this must be followed by a sync with iTunes to re-transfer your selections under the various tabs for your iPhone sync preferences with iTunes that is not included with your iPhone's backup when doing so such as music, movies, tv shows, podcasts, 3rd party apps, and photos from your computer.

Big Button become Small Button after patching system

Hello experts,
we have a produktiv running WD ABAP application, which runs on computers with touchscreens.
Because of that we developed the applicatin with big buttons (standard Ui element button with a big image) so that our user can hit it with their finger. now after patching our systems the buttons are small again and the big image in the button is cut.
Does anybody know how we can increase the size of the buttons?
Regards

Hi,
I presume you have upgraded your system from SP<=13 to SP>=14. We have a same problem after we have patched our system.
There was a problem with the alignment of the images when large images were used. Therefore SAP rectified the same in rendering corrections from SP13 which were available in SP14. As a result of which button size remains small even if you use large image.
You can not use theme editor to change the button sizes or image sizes. The only option is to raise an SAP ticket. SAP is already working on the issue as I had raised a ticket for the same. Hope to have a fix very soon. But I suggest you also raise an OSS ticket.
Regards
Rohit Chowdhary

Schedule line date changes after each MRP run

Dear Experts,
Clarification needed on how the system plans the MM schedule lines.
Setting: Start in the past not allowed.
3 days for processing of order
The issue is after each MRP run the system is moving the schedule line to the current date + 3 days for processing + the planned delivery time.
If the schedule line is not firmed, after each MRP run ( which happens everyday) the system is moving the schedule line and then giving an alert saying the " order has to be rescheduled to the previous day"
on the second day after the mrp run the system moves the schedule line again by one more day and gives the rescheduling date as " -2 days from today"
this change is happening every day after the planning run. - because of this there are really no backorders ( schedule line in the past ) in the system. we were not able to know if the vendor is actually delayed in this case.
can you kindly suggest what went wrong here ??
we are using strategy 10 for the planning of procured parts. Let me know if more info is needed.
Note: we are also using stock transfer process for some procured parts. there too the PR date gets changed after each MRP run. There there is no lead time in this case. the order is placed on the same day as the requirement as both plants are nearby. There the PR date is changing everyday to the current date.
your advice would be of great help
thanks
Nagendra Kumar

Hi Caetano,
thanks for your suggestion
Yes, we use firm zone for few of the vendors. there the system don't change the schedule lines.
Also for the stock transfer PR's there is no firm zone and the lead time is one day. in this case it changes everyday after the MRP run.
the stock transfer PR's leads to the creation of Schedule lines from the source plant. Since this PR gets changed everyday. the alerts coming out of MD07 gets changed and we really did not know if this order is delayed or not. In the source plant we use the firm zone to avoid moving the schedule line. But then the alerts are always not correct.
is there any setting which helps in not moving the PR everyday without using " start in the past"
thanks
Nagendra Kumar

Address data changed after invoice is created

Hi,
I've a problem to solve and it's related with data changed after invoice is created.
The scenario is the follow:
1º - create a complete and standard sales process - order => delivery => invoice, with the standard partner scheme and without edit the address data, for any kind of partner
2ª after the invoice is created, I change the address data on Client Master Data, for the same client that I've used on previous process
3º I'll go to the VF03 transaction and take a look at the partner data on header level. Here I can see that the changes on the Client Master Data ar updated to the invoice document wich is already created and printed when I maked the changes
I think that could be a program error because, once the documento is created, you only can change texts and accounts if this document is not yet created.
And, I can't edit this kind of data on invoice creation because it must be done at order level.
So I don't understand why it happen, but it happen on more than one client.
I'll hope that anyone can help me to solve this issue.
Kind regards,
Nuno Rodrigues

Hi Nuno,
the adresses of all Clients are stored in table adrc. If there are no changes in the order, the system takes the standard adress of the client. That is made for not having an extra adress for each order.
If you change the adress - the system will create a new adressnumber ( 999........ - see in VBPA ).
If you have different adressnumbers in your orders, you are not able th collect several orders into one delivery note - for the adressnumber ist normally a split-criteria.
Ich you will have an extra Adress for each Order, change the adress - for example by an user exit.
But if you have different adressnumbers - the delivery and the invoice will split the different orders - if you dont do something against in an user-exit.
Hans

Translation Changes After Patching 9.3.1

Similar Messages

Maybe you are looking for