Translation Pattern report

Is there a way to generate a translation pattern report? We have a quite a few translation pattern entries and trying to copy each one onto a spreadsheet would really be time comsuming. I've searched and cannot find anything, hopefully someone can point me in the right direction or may have a suggestion other than copying and pasting. Thanks

You can use the import/export option for TPs.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

  • Call Manager 9 - Translation pattern report

    Is there any way to search all patterns to see what is pointed at a certain #? We have a UCCX queue for special projects. There are calls still going into this queue but I am unable to find what number is still pointed at the incorrect route point. I am hoping to not have to manually check 300 numbers.
    I am needing to see what numbers are still pointed at 16XXX.
    Thanks

    Short of working your way with CLI queries, then you can use the BAT export option to get them all.

  • Translation Pattern Usage Report

    I am trying to determine if a translation pattern is still needed.  Is there a report that can be run?  Call Manager Release 6.1.  Thank you.       

    Hi,
    You can try to check in CDR for the Called Party number (Original and Final) if they match the Translation pattern or the Called Party Transformed number (using Mask or Prefix).
    HTH,
    Jagpreet Singh Barmi

  • Translation Pattern digit problem

    We have created a translation pattern (6925) which allows our users to call an internal number in order for them to get routed out to their external helpdesk via the PSTN (908456016925). Initially this didnt work as the translation patter number of 6925 did not have the correct Calling Search Space to get routed out of the voice gateway.
    That is now fixed however every time you dial 6925 you get a dead tone when dialling the number 2. If you press 5 immediately the call routes to the translation pattern and out to the helpdesk. This is not ideal as many users are putting the phone down when they get the dead tone as they think the number is incorrect.
    I have checked our dial plan route plan report and can confirm that no other device etc has been allocated a number beginning with 692.
    I've also created another translation patter (6935) to the same PSTN number and this works fine ie no dead tone when I dial the digit '3'. In fact I have tested 3,4,5 etc and they are fine its just 692.
    Any help would be appreciated.......
    BSOC

    My first step would be to remove the 6925 translation from CM.  Once removed, I would try dialing 6925 to see what happens, knowing full well that it should not work.  If there are any other patterns or devices beginning with 69 it should fail after pressing the 2 since there is nothing that matches.  I would then add the 6925 translation back in and test again.  Let us know!
    Tony

  • How many times is my Translation Pattern being used?

    I am running CUCM 8.5.1.  I have about 50 or so translation patterns.  Is there a report that can tell me how many times each translation pattern is being used daily or weekly?

    Here is the entire setup and my problem.
         Service Provider is sending 9725 and 3131. 
         Voice Gateway is doing a Num-Exp to 2604 and 2403  (respectively)
         Then, the Call Manager is doing a translation on both numbers to Route Point 7824 which then triggers UCCX.
    Two numbers for one purpose.  I would like to remove 9725 / 2604 but I'm not sure how many times it is being used.  Are the calls that are hitting my route point coming from 9725 or 3131?  I can't tell since they both are being translated to the same Route Point.
    Whats the best way of finding out?  Thanks for your time guys!!

  • Translation-pattern delay to outbound call

    Hello,
    I config one translation-pattern: 1234 tanslation to one mobile number (call ouside to PSTN via E1 link)
    and also config T302 time value = 5000 (default 15000)
    When I dial 1234, I will get a dial-tone, then waiting 5 second -> the call active.
    Is it normally?
    Or what could I do to resolve it?
    Thanks.

    What you are experiencing is expected, this is what is called Inter-digit time out. What is happening is that within your dial plan there is another pattern (could be another Translation Pattern, DN or Route Pattern) starting with "0".
    The following Cisco document explains this behavior:
    http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-callmanager/6171-interdigit-timeout.html
    Now going back to your concern and moving forward with the explanation, the Unified Communications Manager Platform is designed to route calls based on the closest match. When you dial "0" since there is another pattern starting also with 0 in your dial plan then, CUCM will wait for more digits. It is not until the T302 timer (that the document above mentions)  expires that CUCM routes the call based on the order of the partitions set or configure on the routing device (in your scenario it is going to be the CSS of the Translation Pattern)
    You will be able to check there is an over-lapping pattern within your system by going (in the Administration page for Call Manager) to Call Routing > Route Plan Report and:
    1) Type 0 on the search bar and hit search and all the results starting with 0 should display.
    Or
    2) Exporting your dial plan to a .csv file, open it with excel and apply filters to find the overlapping problem.
    You can also reduce the T302 timer from the Call Manager service parameters from the default value (15 seconds) to a minimum of 3 seconds.
    Hope this information helps

  • Call to translation pattern took longer to reach the translated DN

    I translated 0 > 9000 which is pilot number for CUACE, noticed when press 0 to dial using particular CSS it's taking a few seconds before the call translated to 9000 and hear the ringing tone.
    Which part to check on this?
    Thanks

    What you are experiencing is expected, this is what is called Inter-digit time out. What is happening is that within your dial plan there is another pattern (could be another Translation Pattern, DN or Route Pattern) starting with "0".
    The following Cisco document explains this behavior:
    http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-callmanager/6171-interdigit-timeout.html
    Now going back to your concern and moving forward with the explanation, the Unified Communications Manager Platform is designed to route calls based on the closest match. When you dial "0" since there is another pattern starting also with 0 in your dial plan then, CUCM will wait for more digits. It is not until the T302 timer (that the document above mentions)  expires that CUCM routes the call based on the order of the partitions set or configure on the routing device (in your scenario it is going to be the CSS of the Translation Pattern)
    You will be able to check there is an over-lapping pattern within your system by going (in the Administration page for Call Manager) to Call Routing > Route Plan Report and:
    1) Type 0 on the search bar and hit search and all the results starting with 0 should display.
    Or
    2) Exporting your dial plan to a .csv file, open it with excel and apply filters to find the overlapping problem.
    You can also reduce the T302 timer from the Call Manager service parameters from the default value (15 seconds) to a minimum of 3 seconds.
    Hope this information helps

  • Translating a report which is using excel template

    Hello,
    We are working on a BI report using excel template. I've checked the report designer's user guide and it says template translation is a feature only supporting RTF and BI publisher layout template.
    I am wondering what is the best practice for translating a report which is using excel template.
    So far I have a alternative which is making all labels in my template dynamically getting values from HCM lookups , but this solution is time consuming.
    Could anybody help here?
    Regards
    Buyun

    Did you try reading sap help files which clearly explains about Managing templates, selecting templates, creating templates, deleting templates.
    [Managing Templates in ALV|http://help.sap.com/saphelp_apo/helpdata/en/d4/a2a138198daa2fe10000009b38f842/content.htm]
    This will provide you a clear picturesque on handling templates in ALV.
    Edited by: K.Manas on Dec 22, 2010 9:13 AM

  • How to translate ABAP report documentation

    Hi to everybody
    Today I've applied a OSS note, where was required also to create a Report documentation using SE38 transaction.
    Of course I've applied the note and create the required documentation in EN language.
    Now because teh Report it's an Italian FI localization I need to translate teh Report in IT language.
    Using SE38 is possible translate all Text-elements, but is not possibible provide a transaltion of Report documentation.
    I've tried to use SE63 as suggested in many discussions, but when I try to translate the RE object documentation  instead the long text
    I can see this instruction:
    /: INCLUDE ZRFIDITBLIST OBJECT DOKU ID TX LANGUAGE E 
    Can somebody explain how is possible to provide a transalation of this object in another language ?
    Thanks for your help.
    Claudio 

    Hi Claudio,
          Firstly make sure your abap documentation is in active version for English language. Then go to SE63 > Translation -> ABAP Objects -> Long Texts -> L5 -> Choose Reports, Function Groups, Logical Databases and proceed the translation.
    Thanks
    Hock Lin

  • Translation patterns - best practice

    We have 300 DIDs from our telco.    Currently, only 150 are in use.   If a call comes thru for a non-asigned number, I would like to set-up a call handler that states the number is a non-working number that belongs to the company and then give options for contacting the correct person.      Also, when a person leaves the company I am currenly forawarding the number to the operator but I would also like to make these numbers part of the call handler.
    My question is this - what is the best way to set this up?    I currently am removing the number from the directory numbers and setting up a translation pattern to point the number to an end point such as the operator.    Is this the best thing to do?    I would like to know what is considered to be "best practice" in keeping the phone system as clean as possible.
    I appreciate any input.
    Pat

    I would setup a catch-all scenario with a translation to a CTIRP that would forward to VM and hit the Call handler you desire.  For example if you had the DIDs 212-555-1000 thru 212-555-1299 i would first setup a non-DID CTI RP that matches your call handler dtmf (e.g. 7999 if you use 4 digit extensions).  the CTI RP for 7999 would forward to VM and then the Call Handler with DTMF of 7999 would play your message that number is not in use.
    Then setup a translation for 212-555-1[012]xx that translates to 7999.
    This wildcard match would not route the call if there was a more specific match present within the Calling Search Space for the Gateway.  So if extension 1050 was present it would route to that phone, but if extension 1051 was a terminated or unused number it would not be present and therefore the call would hit the translation and be routed to the "number not in use" call handler.
    I think this is what you are after, a way to minimize the translations and not have to keep track of individual numbers.  Of course modify the length of the translations if you are not routing based on 10 digits.

  • Translation Pattern for a Route Pattern

    I´m trying to make a translation pattern for a route pattern to add a * or a # in the end of the number I'm dialing for example the route pattern is 9.0414XXXXXXX and I want to change to XXXXXXX*. If I dial 904141309131 I see in the phone 4130913*. It seem to be taking a 4 that belong to the 0414 and it is eliminating the las number that in this example is 1. To me the number that I must see when the translation is made is 1309131* and not 4130913*. Is this the way it shoul be done?

    Martin,
    Did you ever find out how to do this ? I have the same requirement and have tried various transform masks none of which has succeeded.
    Thanks in Advance.
    Mark.

  • Translation pattern question

    Good afternoon - I had an urgent request to forward a number out of our DID pool to a satellite phone, which I was attempting to do with a translation pattern. When that didn't work, I tried setting that DID up as a regular DN, but not assigning it to a phone, and configuring the CFWALL to forward to the international number, making sure the cfw partition is set to all international calls.... Is there an easy way to do this? Other than configuring that number on a phone of course and doing a good old-fashioned CFWall.

    Yes, I ensured that I had the correct CSS and number mask. As a quick fix, I put an extension on the employees phone, and created a temporary cfw CSS with international calling capabilities and forwarded all calls to the satellite phone number.
    Thanks!
    Joel

  • Query About translation pattern

    HI ,
    we have call manager 8.6 version.
    we are planning to implement incoming call blocking based on calling number as we are using MGCP gateway.
    we have already implemented +dialing in incoming calls in calling party number.
    Query:
    will translation pattern pass alphanumeric charactors?
    if the matching number starts with  alphanumeric charactors (+ ) in translation pattern will translation pattern pass the number or will reject?
    Thnaks,

    Try this
    SELECT ffv.flex_value, maptl.parval
      FROM apps.fnd_flex_values ffv,
           (SELECT ffvc.flex_value chval, ffvh.parent_flex_value parval
              FROM apps.fnd_flex_values ffvr1,
                   apps.fnd_flex_values ffvr2,
                   apps.fnd_flex_values ffvc,
                   apps.fnd_flex_value_hier_all ffvh
             WHERE ffvh.child_flex_value_low = ffvr1.flex_value
               AND ffvh.child_flex_value_high = ffvr2.flex_value
               AND ffvc.flex_value_id BETWEEN ffvr1.flex_value_id
                                          AND ffvr2.flex_value_id
               AND ffvr1.flex_value_set_id = :val_set_id
               AND ffvr2.flex_value_set_id = :val_set_id
               AND ffvc.flex_value_set_id = :val_set_id
               AND ffvh.flex_value_set_id = :val_set_id) maptl
    WHERE ffv.flex_value = maptl.chval(+)
    AND ffv.flex_value_set_id = :val_set_id
    ORDER BY ffv.flex_valueThis takes value set id as an input parameter.
    HTH

  • Translation pattern not matching

    Hello All
    I am configuring a cucm 4.2 (yes i know its obsolete) integration with Lync 2010 and am having issues with a translation pattern.
    The Lync server is sending me 86xxxxxxxxxx for calls within china and will send 61xxxxxxxx for australia (strips the +)
    I have configured a [^86]! which should match any international numbers (other than China) and be prefixed and sent to the gateway. Here is the wiered thing I can dial +44xxxxxxxxxx using my lync client which proves that this is matching (when i delete the translation the call will fail).
    But when i dial a number like +61xxxxxxxx it doesnt get through and i get
    Cisco CallManagerDigit analysis: match(pi="1",fqcn="", cn="removedbymyself", plv="5", pss="LYNC:PT_Reception", TodFilteredPss="LYNC:PT_Reception", dd="61xxxxxxxx ",dac="0")
    Cisco CallManagerDigit analysis: potentialMatches=NoPotentialMatchesExist" on the traces.
    The LYNC partition has the translation rules. and the CSS assigned to the sip trunk has access to it. the CSS configured in the translation rules is the also the one assigned to the sip trunk.
    Anyone see this sort of thing before? how can i check if there is another transformation taking place?
    Only way i get round is to put a translation patter for " ! " and it works for all international calls.
    Thanks,

    Hi,
    Have you tried testing the call with Dialed Number Analyzer? I find that's a fantastic and often-overlooked tool for this kind of issue. If DNA shows the call will not route, it's probably a CSS issue for the Stafford gateway. If DNA shows the call will route, then it's probably a dial-peer issue on the Stafford gateway.
    -Jameson

  • Translation Pattern - X wildcard not working.

    I am trying to translate any calls from a certain CSS to extension 4900-4999 to a single extension (8114). I tried using 49XX as the
    Translation Pattern, 8114 as the Called Party Transform Mask, and the partiton for this is the first in the CSS list. This is not working...it just calls directly to the dialed extention (4950), but if I change the Translation Pattern to 4950 it works just fine (goes to 8114 like desired). The partition 4950 is located in is halfway down the list in the CSS. Is there a particular reason the X wildcard is not working in this instance?

    Everything is working as expected based on your configuration, CUCM uses best match routing.
    I can already tell your CSS has access to both, 4950 and 49XX, thus,it's all working fine.
    4950 is one match
    49XX 100 matches
    4950 is the best match.
    CSS order only matters when there's 2 or more patterns with the same number of matches. Only THEN, which CSS is on top, will matter.
    You need to remove access to the DNs directly and leave only the TP.
    HTH
    java
    if this helps, please rate
    www.cisco.com/go/pdihelpdesk

Maybe you are looking for