Transmission Medium 5 with one time customer..

Hi there, I have sent email from a smartform using a Z print program where I do all the coding to make the email go out. I really want to know how to use transmission medium 5 to do the same without making a Z print program and coding it all. SAP standard functionality allows this but I have seen many references of having to enter the email address on the customer master but in our case we are using a "one time Customer" for these documents where you wouldnt update the customer master, the email address is saved at the document level.
My question is: Does SAP allow for the use of transmission medium 5 for these one time customers.. If so what needs to be done for it to work?
We have the output type set up as 5, a print program and a smartform all ready.
Thanks In Advance .
TonyC

Hi,
To maintain addresses of the email you can maintain it in ADR6-SMTP_ADDR.You can fetch this address based on the addrnumber

Similar Messages

F-32 for one time customer code

Hi,
This is related with F-32 cusomer open item processing. It involves some of these document type....billing type RV , DA i.e. credit memo and many other. After processing open item if debit credit matches with differnce zero system easily post the clearing doc. But when there is difference system passes one document for balance amount. like if more of RV billing doc it will show receivable or vice cersa more of DA type doc it will show advance received right?
Normally System automatically post document for this differnce figure. Document type AB i.e. now my customer will have open item with AB document type till next clearing. However in case of one time customer sytem simulates the documet. Pass first line item with document type AB for differntial amount but shows error 'correct first line litem before posting. '
When i open that line item, it shows business partner data i.e. customer adress is blank and if you filled up that system allows to post.
As per my analysis when i tried to do F-32 for other than one time customer code system flows this address (If more of RV
balance then from RB Billing Type or advance received i.e. more of DA type then that corrosponding document.) But in case of one time customer code we do not maintain master and therefore systm can not find out that adress deatils and ask for it before posting docuemnt. This is as per logic and correctly understandable.
But i want to know is there any other way or config through which system can automatically pick that adress data in case of AB document type for one time customer code?
Kindly note that it happens only with one time customer code and all other customer codes are doing perfect.
Kindly share your views.
Regtards,
Aks
Edited by: Akshatavyas on Nov 24, 2011 12:04 PM

Hi,
Thanks for your response.
But tell me one thing even adjustment document posting (doc type AB) system consider it as second transaction?
I feel one thing strange that my users never found such problem earlier.
I told them to find out any such scenario where system posted AB document for one time customer code.
If not then being this is first time case can be accept.
Secondly if volume is less then i don't think any abap development is required.
Bcaz anywez we can manually enter those customer address data for AB document type.
Regards,
AKS

Order Creation for One time Customer

Hi,
I amcreating a Media Order using BAPI, "BAPI_ADMGMTSO_CREATEFROMDATA" and it is fine.
Requirement is to create the order with 'One time customer' option, which the BAPI dosent support. Is there any other option to accomplish this ?

Hi Praveen,
Try this BAPI BAPI_SALESORDER_CREATEFROMDAT2
let me knwo if it works for u
Regards!
Prasanna.

Post one time customer payment with clearing

Dear,
I paid one time customer billing using F-28. When i choosed a n open item (billing doc) with ope item selection as follows :
- account : customent number
- account type : D
- standard OIs was ticked
but there was a message :"no appropriate line item is contained in this document"
Then, i created payment document using F-02 with doc type DZ.
In the one time customer pop up screen, i entered the name as the same as the name in the billing doc.
I tried to clear customer manually using F-32, but the message is still the same : :"no appropriate line item is contained in this document"
Thank you for ur help...

Hi,
Please check if you can see open item in FBL5N for this one time customer.
Check whether there is any Invoice in open Item
If you can see that in FBL5N definitely you can clear with Payment in F-28.

One-time customer with ERP Sales Order

Hello experts,
I am working with ERP Sales Order on SAP CRM 7.0 Ehp3.
We have a requirement to start using 'one-time customer' process. I know there is a standard account groupd (CPD) on ECC side for this purporse.
We would like to enter a sales order for occasional customers, without saving the customer in the master data table.
I would like to have an occasional customer (example nº 1000 which should work like a CPD). I need to enter a sales order for this customer nº 1000, and once I enter nº 1000 on the BP number field, it should bring a Pop-up in order to enter the customer's information (address).
This is working when I create the order via VA01 on ECC side, but the pop-up is not shown when I try to create the order on CRM via erp sales order.
Any suggestions on how to make one-time customer work on ERP sales order? And how to make the pop-up work?
Thanks in advance!
Luis

Thanks a lot, Rene! I have just read this SAP note and confirmed your information.
Do you know of any workaround or development that could be done for this scenario using ERP sales order?
If not, I will suggest using transaction launcher and create this type of order for the one-time customer directly in VA01.
Once again, thanks for replying!
Luis.

IDOCS: One time customer Processing Issue with TRMTYP

Hi Gurus,
We are working on the process of Transfer of Location Master from SAP ECC 6.0 to Third Party TMS and we are facing the following problems: While transmitting One Time Customer:
In case of one time customer Account group used are CPD and CPDA. And when we send TPSLOC01 IDOC the TRMTYP has to be OC but it is taking by default CU.
As per my understanding:
Customer one time or regular is determined based on Account Group.
Please guide us on the same to get OC instead of CU in case of one time customer location transfer.
Thanks&Regards
Sreekanth

Hi All,
I am closing this as there are no updates on this.
Thanks a lot.
Sreekanth

Clear one time customer against normal vendor in F110

Hi Gurus,
I am trying to see if it is possible to clear one time customer against normal vendor in F110.
Customer and vendor have been linked and clearing with customer/vendor have been ticked.
Customer invoice of $100 and vendor invoice of $150 have been posted.
In F110 proposal, the two entries appears as separate lines. The customer invoice has a red icon and it says that debit balance is not possible for payment.
What are the matching criteria for customer and vendor transactions in F110?
I suspect it is caused by different payment recipient. The customer transaction took the customer name as payment recipient (e.g. ABC Coy - 00000001 which we have seen often for one time customers/vendors) I entered during invoicing. It's blank for the vendor transaction.
Putting aside the reason why we are not using a normal customer, anybody has any ideas?
Thanks.

Hi,
Do you able to find a solution for your requirement.
My business need is also similar to your. If you have got a workaround,can you kindly share it.
Regards,

How to handle the One-Time Customer Process (Customizations - Master Datas)

How can we handle the processes of one time customers (for example sales from a store without a warranty process fort he products)? Iu2019m planning of creating a different sales document type and use a single customer number for all of the documents created. On the other hand SAP has a solution for the one-time customers but I donu2019t know its details. Can anybody explain me the standard one-time customer process of SAP (the needed customizations and the master datas to be created)?
Thanks in advance for the answers....

Hi..
the one-time customer is an account group (CPDA) that is used for "walk-in" or "cash" buyers. although this account group can be used for regular sales orders, this is intended to be used with the Cash Sales type of sales documents, where no accounts receivable is created. you also need the one-time customer as a "dummy" and avoid creating many customer masters for buyers who may only do one transaction with your company.
when you use the one-time customer account group in the Cash Sales order, you enter the one-time customer number in the sold-to party field. the system will then prompt you to enter the actual name (and address) of the buyer. you can have the option of generating SD reports with the real names of the customers.
you create the one-time customer the same way you do with the regular Sold-to party. there are some differences, in the sense that this is a "dummy" account. you do XD01 or VD01 to create the account, choosing account group CPDA. you also make entries in the sales areas.
Regds
MM

Print out of RFQ with One Time Vendor

My customer wants print out of RFQs with one time vendor.
As per my understandings as like other vendors this one time vendor data is not stored in any table.This data is in table ADRC. And for one time vendor no master data is there.I can see this one time address in particular RFQ.
Now, my customer wants this one time vendor address to be printed in all RFQs.
Is any body come across this scenario ever ?Please guide my it is urgent.
With Best Regards,
Rajesh

Hi,
The vedor(OTV or Regular vendor) will be decided after the price comparision only.
Once the OTV (account group:CPD/CPDL) is finalised as the final vendor for procurement create a new vendor master record (With A/c group:0001) and maintain Inforecord and source list and create PO.
Maintain all the conditions in the Inforecord from the quotations (you have the update info option from price comparision itself)
regards,
Kannaiah Naidu

ADRNR number in BSEC table ( One time customer document )

Hi
We are printing the customer master address details on AR forms with ADRNR field but this logic is not working for one time customer documents in BSEC if ADRNR filed is not available ( BLANK )
The ADRNR filed for one time customers documents in BSEC is not updating always but the same table is getting updated with ADRNR some of the one tim customer document.
I think that the ADRNR filed getting updated if one time customer document are generated from SD & Idoc posting and the ADRBR field not getting updated if one time customer document directly generated from FI side... but i m not 100% clear of ADRNR update in BSEC table for one time customer document
Please help me on this if any body facing some problem earlier.
Thanks
Risha

done

One-time customer

Hi all,
I would like to have a better understanding on the purpose of having a one-time customer vs other normal customer account group.
For one-time customer, similar to other customers, we are required to create the customer master record and extend to a particular sales area where the sales are carried out in order so we can create an order for the one-time customer (example: "12345"). In order to use this customer for another different sales area, one-time customer 12345 is also required to be extended to the particular sales area for that matter.
So then, what are actual purpose in the technical perspective of having a one-time customer account group? It is similar to maintaining a new customer record in order to carry out a sales transaction.
Thanks in advance.
Rgds.
Edited by: PKW on Jun 9, 2010 11:39 AM

One-time customers are those who are not frequent customers. Company will be using those customers very rarely, maybe once in a life time. SAP is giving a special category for those type of customers. Normal customers will have separate Master Data which will have their address, country, bank account, terms of payment, payment methods, etc.
Whereas there will not be such records kept in Master data for those one-time customer. This way you will reduce the data base size. There will be one customers master record named as one-time customers and will have the check box ticked while creating this record. Country field is mandatory when creating a normal customer master (SAP standard) whereas it will not be in case of one-time customers.
When you post a document to this customers (One-time customers), it will prompt you to fill the name address and all the required fields at the document level.
So, we can conclude, One-time customer accounts in SAP means they are account groups for customer and where in only the general data of the customer are stored instead of maintaining the bank data and other company code data that are relevant for other account groups which are useful for long run purposes.
As you know everything that is entered in SAP is saved in some TABLE. Now the customer master is such a table which holds vast amount of data.
The business scenario where the customer which are being in system only for 1 transaction, it is not advisable to have all the data maintained in main master.
Therefore SAP has provided with the feature of One-time customer wherein in the document entry stage only you have to enter the name, address and other details of the customer.
Thanks & Regards
JP

One time customer/vendor

Good morning
Consultants..........
i am not clarified my self about one time vendors/customers ,,,,,,,,
pls let me know how exactly came in to picture one time customer/vendor and one example for this
Thanks in advance
Regards
prabhakar

Hi,
Practically speaking Customers/Vendor with whom you have an one time Purchase/Sales were called One Time Customers/Vendors.
Why ?
If your regular Vendor/Customer were not able to transact with you at some point of time,you find a Vendor/Customer to whom you have a transaction only once.
So basically you dont need any details about this Customer/Vendor because your transaction is going to last for one transaction.Thats why no Master Records are maintained for this One Time Customer/Vendor(reason behind this is to save some space).
There is one more situation where You have this One Time Customer/Vendor on a regular basis that is whenever your regular Customer/Vendor fails you are going to depend on this One time Customer/Vendor.So you need to segregate the transactions of One Time Customer/Vendor.
What you can do?
You can create a Dummy Customer/Vendor for a particular region with the details like Master Record Name,Currency,Sales Office.
If a One Time Customer from that region orders goods, use the customer number master record when processing the Sales Order. You enter the address and other data that is not in the master record in the Sales Order.This is called Collective Master Record of Customers/Vendors.
Regards
Andrew
PS:I think it is lil more elaborate for a simple question.

Special gl indicater for one time customer

Hi all,
I have created a customer with a customer group as "one time customer". Now when I am doing a transaction in T.code F-29 for posting advance receipt with a special gl indicator, the following message is coming:
Special G/L posting to one-time account is not defined
Message no. F5265
But I can see a customer in FBL5N with a same group in respect of which special gl transaction of this kind entered last on 06/02/2010.And the document generated on that date.
Can anyone please help me?
Thanks-
SAMRAT

Hi,
Maintain the Recon link for the Downpayment for the one time customer in tcode obxr. Here you have to maintain the like this
For normal customer you maintains like this
Recon a/c :                              Sundry debtors a/c
Spl G/L    :                                123456
For One time Customer:
Recon a/c   :                    Sundry debtors a/c (For one time vendor)
SPL G/L     :                      123456
Regards,
Kanike
Edited by: kanikehn on Feb 25, 2011 11:40 AM

Taxes for one time customer

Hi all,
I have created a one time customer in the Ac grp CPD and the tax combinations are manintained in master records. But still the tax is not picking up in sales order.
I have thoroughly checked the customer master, material master and the conditions records. It is working fine with the regular customers.
what would be the problem?
Regards,
Ajit

Hi,
Did you do the pricing analysis. is the condition table fields are populated with data.
Regards,
Murali

Display One time customer list and its transactions

Dear,
When we use one time customer in sales order and invoice, we'll get an additional pop up window where we can input name and address of the one time customer.
Where can i get the table they get stored?
If i want to see the one time customer report as well as customer report in fbl5n, what t-code that i can use?
Thank you

Dear,
I can see the one time customer list (added from additional pop up window) in BSEC...:)
What do u mean with this statement :"Here you can add table BSEC and field XCPDK(One-time account), once you add this field in the table, the field will be displayed in the change layout option of FBL3N"
Does it mean that i have to add "a field" in "the change layout option" when i run the transaction of FBL5N or FBL3N?
What field is that? because i didn't find any field of "one time customer as displayed in BSEC" in "the change layout option".
Thank you...:)

Transmission Medium 5 with one time customer..

Similar Messages

Maybe you are looking for