Transport an Action Profile is not working

Hi Gurus
We have configures Service Desk and we copied an existing action file to ZLFN_Action Profile. When i am trying to tranport when i look for Action profile entries ia m  not able to see my customized action profile
Please help me
Thanks
Bhaskar

have you maintained start/ schedule conditions for the action profile?
This is required for actions to get fired successfully.
Also If you are trying to print a document thru the action, check if the printer is set up and connected to the system.
Regards,
Julius

Similar Messages

  • I am trying to reinstall Flash CS4 professional as the action script is not working but now I am getting an error: 2 message when I use the original CD to try and reinstall

    I can't get the original disk to work on a reinstall.  I get the message
    AdobeColorCommonSetRGB
    Error:
    Error 2.
    I teach a class using this program on Macintosh computers running 10.9.5 and the action script is not working.  It will work on any program designed using the 10.8 but if you design any animation on 10.9.5 the action script will not work for the buttons

    You would have to manually delete the color profiles in question... Run the cleaner tool and see if it gets you started.
    http://www.adobe.com/support/contact/cscleanertool.html
    Mylenium

  • File Upload Action Button are not working

    Hi  ,
    In the File Upload Process when the processor are open change request there are Action Buttons  Approve/Reject ,
    When the CR Processor are Click on either Approve or Reject  these two Action Button are not working (means its not show any activity) , while rest of all action button like save,close check , Run validation  are working ...
    While Processor has authorization to Approve/Reject that CR ...

    Hello Nikhilesh
    These buttons are dependent upon the workflow steps. Check that. Check the linkage for workflow. Check SWI6 - CR number and the step. Based on the step you can identify whether the proper step is assigned or not.
    Thanks
    Kiran

  • PS5 Action Keyboard Shortcuts Not Working

    PS5 Action Keyboard Shortcuts Not Working -- Running 10.6.7 on a Mac Pro. Any suggestions?
    I've tried restarting, changing key combinations, etc. Nothing works and I'm wasting time using my mouse...
    Any help is greatly appreciated. 

    I had this problem too but using Windows 7. I tried resetting, renaming the shortcuts, swearing loudly, none of it worked. I found out it was a totally unrelated program, Xfinity Protection Suite, that was the culprit.  My virus protection program added it as an 'upgrade.'  AFter I uninstalled it everything was back to normal. Have you installed anything new onto your computer lately that could be interfering?

  • Dynamic Action on item not working in APEX 4.2.1

    Created Dynamic action on item(Radio based on LOV) to show/ hide other items (event is Change). But its not working. I mean nothing happening onchange ..

    Based on the Radio item value "a" (Y/N) i am showing or hiding items b and c. All these items are in same region.
    Output seen : By default all the items are displayed and no action on changing the value of the radio item a.

  • Certain action shortcut keys not working

    In my Captivate 5.5 training simulation, I want users to click Ctrl+C and Ctrl+V. I've tried inserting a transparent click box and setting the shortcut to Ctrl+C. On success is set to go to the next slide.
    When I preview the training and I press Ctrl+C on my keyboard, nothing happens. I don't get the fail message and the slide doesn't advance.
    If I set the shortcut to something else, like Ctrl+L, it works fine. I'm guessing that certain Windows keyboard combinations are not allowed as shortcuts? Is there a way around this?
    Thanks!

    Hi,
    Like you said, it is not working when you keep a shortcut, which is same as a Windwos Default shortcut for certain action, even the Cp User Guide does not recommend to have a conflicting Shortcut --
    "Note:  If your Adobe Captivate project is displayed in a browser, set keyboard shortcuts that do not conflict with common browser shortcuts. For example, F1 is frequently used as a keyboard shortc"ut to display Help. The Control, Alt, and Shift keys map to the Control, Option, and Shift keys on Macintosh® computers, respectively."
    When such a conflict arises in project shortcut to System Shortcut, the System shortcut takes precendence and it overrides the project shortcut.
    Thanks!
    Anjaneai

  • CS6 Photoshop; Shortcut Action Key will not work

    On my Mac I have Adobe Photoshop installed and I created an action for a watermark for my images.
    It works just fine when I manually press the play button, however the shortcut key, that I've assinged as Shift + F2, will not work. I've tried different combinations and nothing is working.
    Any suggestions on what I can do to so it will work?

    Figured it out, it's because I had to press fn along with Shift + F2

  • Lens profile was not working!

    i generated lens profile data lcp, with Canon EOS-1Ds Mark III, samyang f=14mm lens.
    it is good working on at the same camera and nikon D3 shooting images.
    but at the Canon EOS-5D Mark Ⅱ shooting images (these are CR2 format) it is not working !!
    what is the reason? is it different camera or different image format?

    canon 5D mark ll (poor)
    canon EOS 1Ds Mark lll , nikon D3
    it's a good working !!

  • Profile Manager not working at all, psql cannot connect to server??

    Upgraded existing system to Mavericks. Everything was running fine with Mountain Lion, everything fine on my test server too. After upgrade to Server 3.0, Profile Manager does not work. It cannot be configured.
    After reading through posts here and trying their suggestions I find that psql cannot connect to the server and get this error at every turn.
    psql: could not connect to server: No such file or directory
              Is the server running locally and accepting
              connections on Unix domain socket "/Library/Server/ProfileManager/Config/var/PostgreSQL/.s.PGSQL.5432"?
    Activity monitor shows it's running, also checked network utility to make sure I could get a connection through 127.0.0.1 on port 5432. It's good too.
    Also in the migration_tool.log file the last entry backs up this error.
    STDERR  | psql: could not connect to server: No such file or directory
                |           Is the server running locally and accepting
                |           connections on Unix domain socket "/Library/Server/ProfileManager/Config/var/PostgreSQL/.s.PGSQL.5432"?
    Where do I start? I think getting psql working is a big first step....

    Thanks Tim,
    I manage several different systems so I started comparing the one that doesn't work to one that does work.
    On the one that's malfunctioning, this is a message I see often:
    Is the server running locally and accepting
              connections on Unix domain socket "/Library/Server/ProfileManager/Config/var/PostgreSQL/.s.PGSQL.5432"?
    So I checked to see what's in the directory /Library/Server/ProfileManager/Config/var/PostgreSQL/ and got this result.
    sudo ls -la /Library/Server/ProfileManager/Config/var/PostgreSQL/
    total 0
    drwxr-xr-x  2 _devicemgr  _devicemgr   68 Dec  4 09:31 .
    drwxr-xr-x  3 _devicemgr  _devicemgr  102 Nov 13 06:13 ..
    An Obviously empty directory.
    Now on the server that's working this is what I get.
    sudo ls -la /Library/Server/ProfileManager/Config/var/PostgreSQL/
    Password:
    total 16
    drwxr-xr-x  6 _devicemgr  _devicemgr  204 Nov 22 17:47 .
    drwxr-xr-x  8 _devicemgr  _devicemgr  272 Nov 22 17:48 ..
    srwxrwx---  1 _devicemgr  _devicemgr    0 Dec  4 09:20 .s.PGSQL.5432
    -rw-------  1 _devicemgr  _devicemgr  139 Dec  4 09:20 .s.PGSQL.5432.lock
    srw-rw-rw-  1 _devicemgr  _devicemgr    0 Nov 22 17:47 .xpg.skt
    lrwxr-xr-x  1 _devicemgr  _devicemgr    3 Nov 22 17:47 .xpg.skt.lock -> 164
    Obviously something is missing on the one that's malfunctioning.
    I think that pgsql isn't running correctly and like you said Apple moved some things and we don't know where all of them went.
    Any suggestions anybody?

  • Canon 24-70mm f2.8 II - profile correction not working

    The profile correction in LR5 for the above lens is not working. It appears it's a blank profile with zero distortion data. On the other hand, the profile for the older lens, the canon 24-70mm 2.8 I works well.
    Having owned both I know version II of this lens has less distortion, but it's by no means zero across the range. This is one of the most important top of the line lenses for Canon, I'm sure many like me would appreciate this profile corrected.
    Thank you.

    I also for got to mention that the data in this profile may actually be invalid as the minimum focus distance for that lens is 0.38m
    Another more basic reason to regard it with suspicion, would be that it reports a crop factor of 0, which is (of course) impossible.
    The fact someone in the community may have rated it 5 out ot 5 for quality, is not exactly authoritative AFAICT .
    The profile already installed along with LR is distinguished by being generated with the 5D Mk II, not the 5D Mk III, but IMO this is no reason not to prefer it in other respects. Adobe seem to have done a thorough job of the task here.
    It sounds in this case, as if a (apparently invalid) profile that has been downloaded by the user, has taken precedence over the "built-in" one. (These two classes of profile are stored in different file locations with differing user permissions.)
    In case you are unaware, the profile that is to be auto-selected against a given Lens ID on the images, can be controlled by the user. Choose "Set as Default" from the profile selector, after manually choosing one there. All images with the same Lens ID, where the profile selection reads "Default" (which is a safe setting to impose across all images), will hereafter adopt a user-corrected choice of profile, all by themsleves.
    RP

  • "Jump To" action on button not working

    First, let me say that I have read a ton of messages on this
    topic before posting this. Unfortuantely I have tried for over 5
    hours to resolve this but no success. What is particularly strange
    is the fact that this project file was published and working for a
    few weeks but now is no longer acting correctly regarding the "jump
    to slide" action for buttons.
    I have built a project of about 30 slides. There are 4 quiz
    questions, with scoring, that are programmed into the project. If
    the user gets a passing score, their next slide is a 'success' page
    and they continue on. However, if they do not pass (all 4 questions
    must be correct) they are taken to a "fail" page that has 2 buttons
    - 1 button is to go BACK to a previous slide where major content
    is; the second button takes them BACK to the very first question
    slide.
    When I select the "jump to slide" choice from the "on
    success" pull-down menu, the buttons do not work. When I select
    another action choices, such as "open URL" or something else, they
    do work. I have selected the "allow backward movement" choice from
    the quiz manager which I have read in other posts saying that may
    need to be selected. I have also checked my quiz scoring logic
    making sure that if they are passing the quiz, they end up on a
    different slide than if they fail the quiz.
    I have also tried making a completely new movie with a slide
    that has the "jump to slide" on a button and it does not work. I
    have tried copying/pasting slides from one project file into
    another but no go.
    Really stuck bad and cannot afford any more time to
    troubleshoot. I'd rather not have to remove the quiz and dependent
    branching but may have to.
    Is there an Adobe Support person I can send this project file
    to for review?
    Thanks in advance!!

    Let me fist say - "I feel your pain". I too have been going
    though this for the past 6 hours with a peer and when requiring
    100% pass to continue it would not go back. Here is what should
    work for you that yes, Adobe has not covered well in their
    documentation:
    Go to Edit Question-->Edit Quiz-->Reporting--> Have
    100% or more of total score to continue.
    Then Quiz--->Quiz/Required--> Change from "Pass
    Required - the user must pass this quiz to continue" to "Required -
    the user take this quiz to continue"
    And Quiz/Settings--> Allow backward movement checked
    Then Options-->If Failing Grade--->Jump to slide/Slide
    This should work for you. What I found out was that if you
    have Pass Required instead of Required along with Allow backward
    movement not together it hangs at the score results. If you have it
    set for Pass Required you don't even get past the last Question
    Slide.
    Welcome to the world of Captivate Quirks. Let me know if this
    helps - It works for us.

  • HCP debugging and profiling does not work anymore

    Hi,
    starting HCP in debug or profile mode does not work anymore.
    Last week I developed a small java app and could debug it on HCP. Today I updated the HCP Tools eclipse plugins and now I can't change the state of the server to debug or profile. Of course the debugger does then not stop at my breakpoints.
    Any hints?
    Regards Helmut

    Hi Alex,
    as you can see on the screenshots the option is available. When I start in Debug Mode the state changes to started instead of debugging. Setting breakpoints then has no effect.
    1. Start in Debug Mode
    2. Server not started in Debug Mode
    Regards Helmut

  • Interactive Reports Action Menu buttons not working

    We are running Apex 4.02 and using theme 11 (round green). We recently upgraded to IE 10 (on windows server 2008 R2) and are now experiencing issues with all interactive reports within Apex. The Action menu is displayed correctly and the options are available but the buttons to apply the changes do not seem to respond.
    For example, I can press the Action button then select Format->Sort from the actions menu. The sort by options are displayed but nothing happens when I press the Cancel or Apply buttons. There is no error - it looks like the button press is not executing the code.
    I have searched for issues specifically related to Apex but have only been able to find references to general problems with IE 10 and Ajax calls. I'm not sure whether IRs are using Ajax as part of it's core functionality and whether this is the behaviour we are seeing.
    I'm keen to understand whether others have encountered this problem and resolved the issue somehow. Any help would be very much appreciated.

    I would have set this up somewhat differently.  I'd have all of your buttons set to pause the slide in exactly the same spot about 1.5 seconds into the slide.  To set the variable for completion of a section I would have used a standard or conditional action that was executed by the button that brings the learner back to the menu slide.  This action would set the variable and then jump back to the menu slide using the button's On Success action.  You need one of these actions per separate section in your project.
    As to why some of your buttons are not working at all...
    1. They may not be set up correctly.  Check all settings again.
    2. The buttons may be corrupted.  Delete the ones that don't work and insert new ones.  Avoid copying and pasting.
    As luck would have it, I've just completed an e-book Guide to Adobe Captivate Advanced Actions that has an entire series of practice exercises that take you step by step through creating exactly the menu slide setup that you describe.  If this project is important enough to you, it may be worth your while to consider purchasing that e-book:
    http://www.infosemantics.com.au/adobe-captivate-advanced-actions

  • Action script 2 not working

    New to Flash CS4, but could do basic button stuff like this in Flash MX 2004. (Haven't been doing anything with Flash in the meantime, but now have CS4 and am determined to get back into it.)
    I chose Action script 2 when starting, and in the publish settings. Made some very simple buttons and used the action script assistant but cannot figure out why they are not working. i keep going around and around and getting nowhere.
    would someone please take a look and advise? I am STUCK.
    Please?
    the file is too big to attach, but if anybody is willing to help, i'll share the file via my iDisk. Thanks so much.

    I have a few suggestions for you -- not that you asked, but hey it is a free forum with volunteers, so you get what you get!
    First if you really don't know AS2 all that well, but you want to get into coding I would suggest starting with AS3. It is the future and if you have to learn new stuff it might as well be the newest, new stuff. AS3 is the future of Actionscript and Flash. It is a little more complex in some respects, but in many others it isn't that much more difficult and it really helps if you haven't learned all kinds of "bad" ideas from how AS2 was....
    Next, if you decide to stick with AS2, I would suggest learning the latest ways of doing stuff in AS2. Using the on(event) type of coding is really old and it won't serve you well if you want to advance very far with your coding.Here is a great article on the transition to the newer style and why it is a good idea:
    http://www.quip.net/blog/2006/flash/museum-pieces-on-and-onclipevent
    After that, consider ditching buttons all together. They are really twitchy and strange and most people I know gave them up when movieclips could have button events attached to them.
    Finally on the issue of Scenes, they are a great way for timeline animators to organize their content. And they are great when everything is just played back to back. In fact that is what happens to scenes, when you publish the timelines are strung together in sequence and then the "scenes" are deleted. The whole thing becomes just one big long timeline. The problems come in when you start using code to move the playhead around. The documentation seems pretty straight forward and it should work, but there are just several little tricky things where it doesn't work. Sounds can cause problems too. So if you plan to use code I always recommend that you use movieclips to organize your "scenes" and not the actual scenes....

  • Custom Actions in WD4VC not working

    Hi,
    I created a composite iview, in that created a form, start point and endpoint.
    The form has 2 buttons submit (standard action) and publish (custom action).
    In endpoint i have 2 boolean variables for ResultState.
    Similarly i have another composite iview.
    Using this WD4VC applications i created callable objects in GP.
    But all the custom actions defined in composite iviews are not working only the stadard submit action is working.
    Kindly guide me or if you have any tutorial would be really helpful.

    Hi
    Have u defined the mapping with this custom event?
    Take help from these threads
    1.[VC button|Custom actions - can we send email with VC button?;
    2.[How to define a Custom Action in VC 6.0 ?;
    Best Regards
    Satish Kumar

Maybe you are looking for

  • Can I see my desktop on Apple TV?

    Able to access my library on Apple TV for photos and music. Wanted to play a DVD and watch it on the larger TV. Thought I could do that with Apple TV (wirelessly, without HDMI cables). Please advise...

  • My mac email will not receive messages due to icloud

    I have a Mac OS X verison 10.5.8.  Weeks ago I thought I had moved from mobileme to icloud. This morning my apple email stopped receiving but it could send out messages.  I called Apple and was told that I have to upgrade to  Snow Leopard and then to

  • Does WebCenter Spaces support Internet Explorer 9?

    Does WebCenter Spaces support Internet Explorer 9? Will it work in IE9 default view, or is compatibility view required?

  • Need to access documents created in Explorer.  How can I do this?

    The lectures for my online biology course were composed in IE.  I typically use Firefox browser on my '08 MacBook. 

  • How to Minimize a  popup window?

    We are using title window as a pop-up. The title window has a property called closeButton which when set to true displays a close button on the top right hand corner of the title window. Likewise, We also need minimizeButton property which can minimi