Transport-Cockpit: No authorization for using the vehicle-resource

Hi everyone
In my planning profile I determined a sprinter as vehicle resource. As soon as I start the Transport Cockpit the freight orders appear, indeed, but TM claims that there's no authorization for my sprinter. The sprinter does not appear in the frame "resource". Selecting this vehicle manually TM post the message: vehicle not found. As far as I can estimate my master data are correct assigned.
Does anyone of you has been confronted with this problem?
Thank's for your help.
Michael

Hello Mike
I created the vehicle under Master Data / Resources / Define Resource.
Resource Category: T
Time Zone: CET
Means of Transport: 4 (the same number as I choosed in the freight order)
Planning Parameters: Finite Scheduling
Owner: the carrier of my freight order
Auth. Resource: the same carrier above mentioned
Template: Resource Template, Means of Transport: 4
Resource Validity: 1.1.1970 to 31.12.9999
Physical Properties: Mass = 1.000 kg, Volume = 4,5 m3
Time-cont. Capacity = 3 Pal (it does not make sense but I have not opportunity to change this value)
The other fields don't have any values.
In the forwarding order or rather freight order I determined the vehicle which is suitable to the selected carrier. I assume that there is a connection between the error message and the planning profile. I define in my planning profile the sprinter as vehicle:
Planning Profile / Capacity
VEHICLERES_ID inclusive = [and my vehicle]
I tried, too:
OWNER inclusive = [and my carrier]
What Transportation Cockpit is doing now, is EXCLUDING exact that vehicle (or rather carrier) I want to dispatch. It seems to work vice versa.
A sprinter is just another name for a small bus. I linked you to a photo of mercedes. Sprinter or long truck - regardless of which of them I use: the error remains.
Regards,
Michael

Similar Messages

  • What is the best practice for using the Calendar control with the Dispatcher?

    It seems as if the Dispatcher is restricting access to the Query Builder (/bin/querybuilder.json) as a best practice regarding security.  However, the Calendar relies on this endpoint to build the events for the calendar.  On Author / Publish this works fine but once we place the Dispatcher in front, the Calendar no longer works.  We've noticed the same behavior on the Geometrixx site.
    What is the best practice for using the Calendar control with Dispatcher?
    Thanks in advance.
    Scott

    Not sure what exactly you are asking but Muse handles the different orientations nicely without having to do anything.
    Example: http://www.cariboowoodshop.com/wood-shop.html

  • Pop Up blocker exceptions are not saved in the browser for use, the next time the PC reboots. How do you save these exceptions for long term use?

    Pop Up blocker exceptions are not saved in the browser for use, the next time the PC reboots. How do you save these exceptions for long term use?

    In case you are using "Clear history when Firefox closes":
    *do not clear the Site Preferences
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/remove-browsing-search-and-download-history
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
    If you have software like Advanced SystemCare (Surfing Protection feature) that might reset some files to older versions to protect these files against changes then check the settings or uninstall this software.

  • Is there a step by step somewhere for using the iCloud Beta?

    Windows 7 64bit  /  iTunes 10.4.80
    Is there a step by step somewhere for using the iCloud Beta? I assume we can activate it after reading Apple advertizing on the Beta and 10.4.80. I don't see anything on iTunes that would get me there - Thank you for your help - IM

    Thank you for the assistance, I greatly appreciate it!

  • What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

    What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

    Connect BB to PC. On 'Desktop Manager'>Backup & Restore tab>Click Restore. Double click .ipd file (backup file created from Desktop Manager).

  • I was not using my Iphone for some time and when i charged it for use the screen is not lighting up. the image is very dim . Please assist to correct this situation., I tried to increase the brightness.no use.

    Iphone 3 GS was not being used for some time. When I charged it for use the screen is not becomeing bright. The images are very dim although i increased the brightness. Pls assist.

    Since it's a new machine, contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine. That also might apply to newly bought ones inside the first 90 days.
    FWIW, IMO, the AppleCare extended plan's the cheapest insurance you can get for your new desktop machine.

  • Do we need a ODI agent to be running for using the startscen command

    Do we need a ODI full installation(both server and client) for using the Startscen command or just the client install should be enough. And also do we need a ODI agent to be configured and running for using this StartScen command
    Thanks

    ODI client is an agent.
    So you don't need to declare one more if not needed on your infrastructure.
    But to run odistartscen you need to configure the odiparams.bat with your repository connexion.
    If not it will try to connect by default to the demo repostory on HSQL.
    best regards,
    Brice

  • Best practices for using the knowledge directory

    Anyone know when it is best to store docs in the Knowledge Directory versus Collab? They are both searchable, but I guess you can publish from the Publisher to the KD. Anyone have any best practices for using the KD or setting up taxonomies in the KD?

    Hi Richard,
    If you need to configure dynamic pricing that may vary by tenant and/or if you want to set up cost drivers that are service item attributes, you should configure Billing Tables in the Demand Management module in 10.0. 
    The cost detail functionality in 9.4 will likely be changed to merged with the new pricing feature in 10.0.  The current plan is not to bring cost detail into the Service Catalog module.

  • Best practices for using the 'cost details' fields

    Hi
    Please could you advise us to the best practices for using the 'cost details' field within Pricing. Currently I cannot find the way to surface the individual Cost Details fields within the Next Generation UI, even with the tick box for 'display both cost and price' ticked. It seems that these get surfaced when the Next Generation UI is turned off, but cannot find them when it is turned on. We can see the 'Pricing Summary' field but this does not fulfill our needs, as some of our services have both recurring and one-off costs.
    Attached are some screenshots to further explain the situation.
    Many thanks,
    Richard Thornton

    Hi Richard,
    If you need to configure dynamic pricing that may vary by tenant and/or if you want to set up cost drivers that are service item attributes, you should configure Billing Tables in the Demand Management module in 10.0. 
    The cost detail functionality in 9.4 will likely be changed to merged with the new pricing feature in 10.0.  The current plan is not to bring cost detail into the Service Catalog module.

  • Pre-requisites for using the Ajax in Portal

    Hi ,
    we are using the SAP Portal 7.01 on level SP 7. What is the prerequisite for using the Ajax frame work in sap portal. Is my current version which we are using is sufficient or need to upgrade to some other version. If the current version is sufficient to use the Ajax frame work, provide the steps for configuring the Ajax.
    Please reply to this
    Thanks

    Hi,
    Now regarding the activation of AFP, you have the do the following steps:
    - System Administration - > Portal Display -> Desktop & Display Rules
    - Open the rule collection from Master Rule Collection
    - Add IF expression with suitable user/group .
    - From the content catalog, navigate to portal content -> every user -> Standard portal users ->
      defaultAjaxFrameworkContent -> Ajax portal Desktop and add this to THEN expression.
    - Apply & Save.
    Now you will be able to use the AFP on your portal.
    Hope it is useful.
    Regards,
    Nishant Singh

  • Could someone post some sample soap for using the WS 2.0 api?

    could someone post some sample soap for using the WS 2.0 api?
    I need the actionheader as well. I don't care the object or the action, just need a sample...

    You can throw a javax.xml.ws.soap.SOAPFaultException. https://jax-ws.dev.java.net/nonav/jax-ws-20-fcs/api/javax/xml/ws/soap/SOAPFaultException.html

  • Keyboard shortcut for using the color picker in another application

    Hi, I'm new here. My first post.
    I remember there were a keyboard shortcut in Ps for using the color picker in another application. For example picking a color in a web browser. I just don't remember the keyboard shortcut. Anyone know it?
    Regards,
    Leif

    Thanks! This was the method I was looking for. Unfortunately it doesn't work when I drag the eyedropper to a browser window on a secondary monitor. Maybe it has to do with my setup, Mac/Mavericks and Ps CC 2014. Anyway thanks for your help, you gave me the answer I was looking for.
    //  Leif

  • [svn:osmf:] 10655: Removing the hack we came up with for using the MAST plugin in the Flex unit tests .

    Revision: 10655
    Author:   [email protected]
    Date:     2009-09-28 13:52:01 -0700 (Mon, 28 Sep 2009)
    Log Message:
    Removing the hack we came up with for using the MAST plugin in the Flex unit tests.
    Modified Paths:
        osmf/trunk/framework/MediaFrameworkFlexTest/.actionScriptProperties
        osmf/trunk/framework/MediaFrameworkFlexTest/org/openvideoplayer/MediaFrameworkTests.as
    Removed Paths:
        osmf/trunk/framework/MediaFrameworkFlexTest/org/openvideoplayer/mast/
        osmf/trunk/plugins/MASTLib/

    Hi OMAW8,
    It would be better if you could share us the detailed error message in English.
    Do you mean that you could run your test in your build agent machine? If so, I doubt that it would be related to the TFS build. I mean that maybe it is not the test issue.
    Please share the detailed error in English, and then post this issue to the TFS-build forum would be better for this issue since it works well in build agent machine.
    Form link:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=tfsbuild
    Reference:
    https://msdn.microsoft.com/en-us/library/hh691189.aspx
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Will Vodafone charge me for using the hotspot service?

    Will Vodafone charge me for using the personal hotspot service on the iPhone? I am also on contract!

    You will be charged for the entire album. The Gifting feature is not recipient-specific, so it would have no way to know that a particular recipient you might be sending to would already have the album. Why not just gift the songs you know your friend doesn't have?
    Cheers,
    GB

  • HT5225 IS THERE GOING TO BE A CHARGE FOR USING THE CLOUD

    IS THERE A CHARGE FOR USING THE CLOUD?

    EaglesPDX wrote:
    Answer is yes. iCloud will charge you $40 a year which you cannot cancel.  It will show first as "Complimentary" $20 charge for $40 storage and then automatically charge you $40 a year thereafter. 
    This is incorrect.  I hope you did not base it on the misplaced dollar sign in my post in your other thread.
    Matt

Maybe you are looking for

  • Install Windows 8.1 Pro on Mac Mini Late 2014

    I'm trying to install Bootcamp on my Mac Mini.  Windows reports that it cannot install or create a partition on the drive after formatting the BOOTCAMP partition as NTFS. This is my setup: 1. Mac Mini Late 2014 with 2TB Fusion Drive. 2. Windows 8.1 P

  • My site renders too large on Windows 7/Windows XP in both IE and Chrome. How can I fix this?

    The site is "zoomed in" when viewed in these browsers - looks larger in view, and doesn't fit in the browser window. Adds scroll bars to the side and right. It's fine across Mac browsers. Very frustrating, as I am job hunting and most recruiters are

  • This disk needs to be repaired:

    I have just checked my hard drive and got this message: Disk Utility has stopped verifying "Macintosh HD" This disk needs to be repaired. Startup your computer with another disk (such as your Mac OS X installation disk), and then use Disk Utility to

  • Emptying a Binary Tree

    Hello, The problem I'm having is how to empty a binary tree. Here is my code for MyBinaryTree: public class MyBinaryTree implements BinaryTree {    private BinaryTreeNode root;    protected static int numNodes;    private static String tree = "";    

  • Guest-book

    Does anyone know how to insert a guest-book or something similar. Thanks!