Transport Error - Datasource not available in the target system

Hello exports,
-- We have a custom Inboject zvendor
-- text master data is coming from 0vendor
-- need to transport the datasource 80vendort of the datamart + some other objects along with it.
-- transport from CLDEV1 to CLQLT1
-- included: datasource 80vendort, trasnfer structure, transfer rules.
-- error: Datasource 80vendort does not exist in the source system CLQLT1 of version A.
-- could you please suggest me if i have missed something in here.
Measures taken:
-- i have tried doing generate export data source in the CLQLT1 system also.
-- replicated the datasources for the self source system in CLQLT1.
-- observed that the datasource 80vendort is not yet visible in datasource overview of the self source system of CLQLT1.
Solution:
-- create a new tranport only for the datasource 80vendort, transfer structure and transfer rules.
Wondering if this solutions would work. Is there any thing I am missing...?
Please suggest. Any suggestions are highly appreciated.
Thanks,
Sweatha.
Message was edited by: Sweatha Mohan

Hi Sweatha,
When we are transporting data source, did you know that we should first transport the data source from R/3 DEV to R/3 QA (Source Systems) and replicate them to BW QA later on?
Because if we transport BW Objects first, we will get similar errors such as what you have experienced.
Hope it helps and if it did, award me points...
--Jkyle

Similar Messages

Error: Qeue 2LIS_03_BF is not available in the source system

Dear Experts,
While scheduling 2LIS_03_BF. It displyed following error.
Error : Queue 2LIS_03_BF is not available in the source system
What could be the problem,
Please help me to resolve this issue.
Regards,
Khader,

Hi Mansi & Sujatha,
I am also facing the same problem, in RSA7 status of 2LIS_03_BF is in red.
Please suggest how could I proceed further.
Regards,
Venkat.

Run As Account does not exist on the target system or does not have enough permissions

We are getting below alerts,
Run As Account does not exist on the target system or does not have enough permissions.
I know we can create a Run As account with low Privilege can fix this issue ,
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
My question here is there is any other way to fix it. I tried giving below permission for scom_act account (we used for agent installation and has local admin rights) but still same issue and
also i tried with sysadmin access for scom_act as well but no luck still having same issue , any solution would be welcome
The min. Privilege for monitor SQL server
DB Server Level
a. VIEW ANY DEFINITION
b. VIEW SERVER STATE
c. VIEW ANY DATABASE
Each DB
a. SQLAgentReaderRole database role.
b. PolicyAdministratorRole database role

Check below link
http://blog.coretech.dk/msk/run-as-account-does-not-exist-on-the-target-system-or-does-not-have-enough-permissions/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Users are created but Roles are not Provisioned in the Target System

Hi,
It would be great if somebody would provided solution to my problem. The problem is when I try to create the Users in Identity Managment UI then the Users are created in the Target systems but the Roles are not provisioned to the Users.
In the provisioning job SetABAPRole&ProfileForUser,
It is says In the Error putNextEntry failed storing
Exception from Modify operation:com.sap.idm.ic.ToPassException: User does not exist
MSKEY 58437
Please note the When we create the User, the user is created however the Roles is not provisioned to the user.
Regards,
Hakim

Hello Nits,
since this thread is from 2010 and the OP was logged on last in 2012 (as you can see in the profile), I don't think you'll get an answer here.
Please create a new thread to explain your problem (with version and SP numbers, logs etc). You can add a link to this thread to show, that the problem is similar.
Regards,
Steffi.

Transport error: Datasource not appearing in PROD

Hi gurus
            Regards.I Transported a CL(Classification datasource) from DEV to PROD.But the import ended with a (class 4)warning ;
ABAP DICTIONARY ACTIVATION : WARNING (4)
Following objects not activated/deleted or activated/deleted w. war
Table ZOXDEV0110 was activated with warnings
(W- Enhancement category for include or subtype missing )
      Final log
*End phase 002 *****************************************************
Hence am unable to see them in RSA6 in PROD...Would appreciate ur valuable inputs on this...
Manythanks
Arun

Hi guys
          The problem is solved..
The particular Datasource was locked in Identical Request(found out that in RSA6 - Datasource - Object Directory - Lock overview)..Then unlocked them DS in SE03.Deleted the old request and Now assgnd the DS to a New Request and Transported.Its seated fine,this time around in PROD..
Cheers
arun

How do I fix an error message, "not available in the us store"?

Mac 10.6.8, iTunes 10.3.1 2.66 GHz Intel Core i7, with 4GB 1067 MHz DDR3. Error message occurs on wireless and when plugged into ethernet connection.

All I am trying to do is access the store, I have not even tried to view anything and I cannot change my view and cannot get into the store?! I am able to view iTunes University material, but as for music, movies, TV shows, app store, books, podcasts or ping, all same message. If I try to sign in, I am receiving an unknown error message...

SAP TDMS - Could not copy A002 Relationships to the target system

Hi,
I had used HCM package for PD & PA from TDMS to transfer the Organizational Management data for couple of records. Everything went fine except that the A002 relationship records were not copied to the target system.
I had verified the target ranges that were defined and it has the Object Type "S" included in it.
But still the A002 relationship records were not copied.
Can anyone help me out with a solution on how to transfer the A002 Relationship records to the target system?.
I had defined the Object Types CP, P, A, AG, BP, C, EK, ET, G4, G7, GE, NA, O, Q, RY, S, T, UG and US. Is there anything wrong with my target areas definition?.
Thanks and Regards,
Anil.

Hi,
have your checked if there is a lock for that relationship in table T77Tr in target system?
Regards,
Ana

Transport error: "Formula is not available in the table RSAFORMMAP"

Hi,
During a transport from DEV to TESTing environment, there was a failure and most details from the transport log was:
Formula is not available in the table RSAFORMMAP
I realized that there were 4 objects in the transport request with some lengthy alphanumeric names.
How to I go about in identify the problem and what will be the most likely fix?
Thanks

Go to transport connection in RSA1 and choose your cube or DSO and choose dataflow afterwards..so that all bex reports and related formula variables are recollected into a transport request.. It is better to recollect them and transport again.

Business Rule error: Accounts are not available in the rule table

Hi everybody,
I have a problem running the Business Rule for the profit/loss copy to the equity account.
The Business Rule I set reads from all P&L accounts, P&L specific flow, acual category, all datasources and then it writes everything keeping the source settings apart from the account destination (the equity profit/loss account) and the flow destination (I write in two different flows, so the rule is made up of two equal lines differing only in the flow destination). "PROFIT" is the ID I chose.
Then I created the related script logic (ID=CALCACCOUNT):
*RUN_PROGRAM CALC_ACCOUNT
CATEGORY_M = %CATEGORY_M_SET%
CURRENCYLABEL = %CURRENCYLABEL_SET%
TID_RA = %TIME_SET%
CALC=PROFIT
*ENDRUN_PROGRAM
Finally, the prompt ( process chain: CPMB/RUNCALCACCOUNT):
PROMPT(SELECTINPUT,,,,"CATEGORY_M,CURRENCYLABEL,TIME")
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SUSER,%USER%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPP,%APP%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SELECTION,%SELECTION%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,LOGICFILENAME,CALCACCOUNT.LGF)
But anytime I run the package it fails giving me the message error: "Accounts are not available in the rule table".
I tried every possible change but nothing; if someone could help me somehow I'd be really grateful!!
Thanks
Filippo

Hi James,
Thanks for your quick response. There is no currency dimension in the application... I've tested with the correct businessrule as CALC value, but this didn't do the trick.
Any other suggestions?
Regards,
Vincent

You are not authorized to logon to the target system (error code 0).

I am facing the dollowing error with the TRUSTED RFC :
You are not authorized to logon to the target system (error code 0).
The connection is from Solution Manager to Managed System. The user set to the RFC has SAP_ALL and SAP_NEW profile and neverthless there is a connection error.
I have already delele all of RFCs related to managed system .
Any clue guys?
Tks
RE

Hi,
In case you selected the option current user for the RFC logon, please ensure that the user (the one you're using ) is available in both systems and also that the authorizations S_RFC and S_RFCACL are assigned on both systems.
If you're using a user just for the trusted RFC, please check if this user exist in both systems and have the mentioned authorizations.
kind regards,
Fabricius
Edited by: Fabricius Zatti on Jun 15, 2011 9:07 PM

Getting error while opening a saved for later notification: The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action.

Hi All,
While opening a saved for later notification, we are getting "The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action". error.
This is a custom notification.
Please help.
Thanks
Raghava

HI All,
Please help on this issue.
Thanks
Raghava

I keep getting the iTunes error message "the item selected is not available in the UK store" how do i fix this please ?

I keep getting the error message " The item selected is not available in the UK store" and i am not able to do anything else with iTunes, any idea how i fix this as it appears to now be restricting my account access across the Mac Book, iPad, iPhone and Mac Mini in the house ?
Thanks

Hi Thanks,
I could only see posts from some months ago and thought I had something different.
Looks like I have not been using the correct search terms.
Will wait and see what happens.

HT1819 Podcasts that I had subscribed to with my old computer are invisible in the Itunes store with my new computer. The error message says the podcast is not available in the US. Yet I can still download them on my old computer. How can I fix this probl

Podcasts that I had subscribed to with my old computer are invisible in the iTunes store on my new computer. The error message says the podcast is not available in the US. Yet I could still download the podcast on my old computer before I switched. How can I fix this?

Hello, ted_marx38.
Thank you for visiting Apple Support Communities.
The most common cause for this issue would be media present that is purchased with another Apple ID. When prompted to authorize the computer it may show a different Apple ID. If this is the case, the computer will need to be authorized for this Apple ID. The article below will walk you through the process of verifying if that is the case or correcting the issue if not.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Cheers,
Jason H.

You are not authorized to logon to the target system (error code 1)

Dear Expert,
I met some problems that 'You are not authorized to logon to the target system (error code 1)' when I tried to do the auth. testing for RFC SM_CLNT<SID>_TRUSTED in satellite system.
Following SAP note 128447, I recreated the RFCs in SMSY in solution manager for satellite system using existing user.
It was still error ''You are not authorized to logon to the target system (error code 1)'.
In SMSY in solman, I checked the RFCs connection which I recreated using RFC wizard, they are ok(green).
I have already maintain the auth. obj S_RFCACL for user who is running this.
So, I am confused what authorization I did not maintain in user? Please help me out!
Thanks a lot!
Br,
Lucy
Edited by: lucy YANG on Mar 19, 2011 6:59 AM
Edited by: lucy YANG on Mar 19, 2011 7:01 AM

Hello Lucy,
The error is pretty clear that the calling system is not a trusted system so I don't think you should bother with an authorization trace at this time, because authorizations is not quite the issue. The calling system is NOT a trusted system, authorizations or not.
Please refer to SAP Note 128447 Trusted/Trusting systems
The error is listed there:
Authorization errors that occur when using an RFC destination for which
the 'Trusted Systems' indicator is set are documented with the following
message:
"No authorization to log on as a trusted system (Trusted RC = #)."
In this case, the trusted return code # (# = 0, 1, 2, 3) has the
following relevance:
1   The calling system is not a trusted system, or the
     security key for the system is invalid.
     Solution: Recreate the trusted system (see
     documentation).
These are the links the Note provides for the documentation:
[http://help.sap.com
/saphelp_nw04/helpdata/en/22/042671488911d189490000e829fbbd/frameset.htm
] in accordance with the documentation
[http://help.sap.com/
saphelp_nw04/helpdata/en/8b/0010519daef443ab06d38d7ade26f4/content.htm].
The Note states to recreate the Trusted system according to the Documentation (links above)
This is all in the Note. Please follow the Note to reslve this known error.
Regards,
Paul

Transporting Process Chains-includes the ERROR DTPs in the Target System

Hello Gurus,
Iam facing an issue in version NW2004s while transporting the Process Chains from DEV to QA. The Process Chains in the Target system are including the ERROR Dtps as parallel loads along with the regular DTP.This happens when there exists an ERROR DTP in the Target system at the time of Transport.
This will cause a problem
1.these would run parallel to the regular DTPs.
2.no of back ground processes running at any point will be beyond our limit.
Let me know if you have faced the same issue and how you resolved it.
Thanks
Jagadish

Hi DPN,
Check oout this thread. This might solve yuor problem.
Errors in Transportation
Thanks and Regards
Subray Hegde

Transport Error - Datasource not available in the target system

Similar Messages

Maybe you are looking for