Transport InfoSources to New Source System

Hi.
When implementing BW in our QA environment, all InfoSources, and their related InfoPackages, Transfer Rules, Update Rules, etc.) were created using a temporary R3 QAS source system mapping (ex.TMP). We are now removing this temporary client and I now need to change my InfoSources (along with customized Start Routines, InfoPackages, etc.) to point to a new QAS source system (ex. PRM).
Note that this new source system is already identified as a source system for BW and all DataSources created on TMP have been transported to PRM. Subsequently, all DataSources have been replicated from PRM to BW.
However, I'm having trouble on the BW end. I can't easily
transfer the InfoSources, etc. to the new source system. I've asked some BW / Basis folks and they suggest transporting the InfoPackages out-of and then back-into the BW QA client. Is this possible? Is there a better way to push my InfoSources, InfoPackages, etc. from the old source client (TMP) to the new one (PRM)? Thanks!

Dear Dave
Please do not attempt to change the logical system name your self, as I feel that you have not tried it before.
This is some thing that your basis people have to do. Depending on the size of database this change can take from 2-24 hours (not exact times, but just some thing to show the magnitude of the task).
Good luck
/FZA
Message was edited by: Fariborz Zangoui

Similar Messages

BW: Connect to new source system via special transport

Hello everyone!
I have a BW system connected to an R/3 source system. I have made a copy of the source system. Now I want all my models to be connected to both source systems. I heard that this can be achieved via special transport (i.e. place all source system dependant objects into a special transport request to be imported back into my BW system, but with the new source system assignment). Does anyone have any documentation on how to do this?
Best Regards and Merry Xmas!
Luís Andrade.

Hi Luis,
There are two parts,
1) If you want to transport all your objects from current R/3 system to newly created r/3 system then you can create a TR and use it in SCC4 transaction during client copy. In the same fashion you can use RSA1---> transport connection and use the TR for system copy. After that once you release this TR all the objects will move from one system to another.
2) But if you have already moved all the objects in source system but now you want them to replicate in BI then go to SAP BI system select your source system and then from the context menu choose replicate datsources option, it will fetch everything from respective source system in BI.
Regards,
Durgesh.

Add new source system to BI

Hello,
Our requirement is to load data from a different R3 client to which we dont have a connection yet.
The idea is to create a new connection but keep the existing one.
Is there any automated tool to do this? We would like to avoid the manual creation of all infosources and transformations from the new source system, but to copy them from the existing one.
We found that there is a tool for replacing the current source system with another one (BDLS), but we just want to create this new one in paralel with the current source.
Thanks!!
Pablo

Hi,
what you can do is, create a transport request containing all source system related things like the infosource/datasource assignment, transfer rules... and import that transport back into your dev system. Before the import you should maintain the settings for source system after transport accordingly.
Siggi

Activating transfer rules for new source system

Hi
we are having 2 R/3 source system in BI. I had activated all the transfer rules with the first source system and now i have created a new source sytem connecting to a different R/3 client. I tried to change the transfer rules point to the new source system using the program RS_TRANSTRU_ACTIVATE_ALL giving the new source system and the infosource name. But i get the error "No Transfer Structure Selected" when i execute the prg.
how can i change the source system without creating the transfer rules for the new source but use the existing transfer rules and just change the source system assigned to it????
Regards
Sujai

Hi Sujai,
There are many cases when this program is used.
When the Trans rules get de-activated due to impact,we need to first replicate the data source and activate the TR using this program.This generally occurs during the data loads in prd.
It does not makes sense to transport it when there r no changes done to the TR.So simply,u can use this program to activate.
If the program does not work,then you are left with the transport option.
Thanks & Regards,
Suchitra.V

There is no PSA for InfoSource ZOUTNBR_TEXT_CC and source system PCFILE

Hi All
The above subject line shows the error.
I have a custome data source in Development that is ZOUTNBR_TEXT which has a source system PC file.(flatfiles)
when i transported all transfer structures and data sources from Development to Quality, only my transfer rules were not activated. but when i manually activated in Quality it throws with an error
There is no PSA for InfoSource ZOUTNBR_TEXT_CC and source system PCFILE
Please let me know how can i activate my transfer rules.
Archana

Hi,
We also faced the same issue while transporting from dev to QA. We raised a OSS, for which SAP has replied saying that there was some inconsistencies with the infosource and they have repaired the same in debugging mode. The root-cause for the issue is unknown. So they have not given any notes to us.
But meanwhile we created a new data source and transported it. that worked fine.
Regards,
PM

No PSA for Infosource X and source system Y. Here Y is the flat file source

Hi,
We are facing an issue while transporting from dev s/m to quality. There is no PSA for Infosource X and source system Y. Here Y is the flat file source system this issue we are getting while transporting transfer rules.We are checked in OSS notes 518426. Its not helpful.
Thanks
Manjula

Hi
Try RS_TRANSTRU_ACTIVATE_ALL (SE38).
You may also check SAP Note 861890 - ODS tables disappear during the upgrade -
and activate all ODS Objects before the upgrade and run the program RSDG_ODSO_ACTIVATE.
also that with Stack 14 an extended version of this program is available together with the
Program RSUPGRCHECK. If errors occurs, consult also SAP Note 518426 and run transaction
RSSGPCLA for the regeneration of the RSDRO_* Objects.
Recheck whether you have Exported with correct parameters or not -- Try to Re Export the Same with all necessary objects .
Try Note 524554 and 325525 also
Hope it helps and clear

No Hierarchies for this InfoSource in the Source System

Hello All,
I want to find out how to get my hierarchy back in Bex (Query Designer). We just got a new BW system. The hierarchy was loading fine in the old system but unable to see it in the new system. I have done the following and still no luck:
Replicated the Datasource
Replicated the Source System
Maintain Hierarchies shows no hierarchies and when I click on create hierarchy (No values when you click on Hierarchy Name). Whereas I get hierarchy values in the old system.
In the Infopackage, click on Hierarchy Selection => Available Hierarchies from OLTP, I get "There are no Hierarchies for this InfoSource in the Source System".
Is there anything am missing? My suspicion is may be the Hierarchies need to be maintained in ECC first and then I should replicate again and then load the hierarchy.
Any suggestion would be appreciated.
Thanks,
Recca

Thanks Sai and RDS.
@ Sai: Yes, the Datasource is present in BW as 3.x version which I assume is ok. It is also present in active version in ECC in RSA6. There is nothing to load for the hierarchy because when you click on the InfoPackage the "Hierarchy Selection" and then "Available Hierarchies from OLTP", in other to refresh the list, I get "There are no Hierarchies for this InfoSource in the Source System".
@ RDS: Yes, the connection of BW to the ECC Source System is good....checked out ok. There is nothing to load for the hierarchy because when you click on "Hierarchy Selection" and then "Available Hierarchies from OLTP", in other to refresh the list, I get "There are no Hierarchies for this InfoSource in the Source System".
Besides RSA6 to check the datasource in active version in ECC, do you have a T-Code to check where these following Hierarchies are maintained in ECC? I need to compare it from the old system with the new system.
1. Fund
2. Fund Center
3. Commitment Item
Thanks,
Recca

About creating a new source system on BW pointing to an Oracle database

hi friends
i m facing problems when i
creating a new source system on BW in AIX pointing to an Oracle database, our bw oracle use 10idatabase ,and we want to connet to 9idatabase(Windows) to get data for BW
(1.)     in /oracle/P01/102_64/network/admin tnsnames.ora I hava add
SJPT =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 68.16.211.177)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = SJPT)
(2) and in etc/hosts I hava add
68.16.211.177 SJPT
(3) in p01adm> tnsping SJPT it is OK
(4)but when i
in BW RSA1 DATA SOURCE
create db connect:
DBMS: ORA
USER NAME: SAP
DB PASSWORD: SAP
[email protected]
i t give me the error message :
ORA-12154: TNS:could not resolve the connect identifier
please help me

HI,my trans.log file is
4 ETW000 R3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 13.11.2007 - 10:16:48
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Tue Nov 13 10:16:48 2007                              81 0.000081
4 ETW000 [dev trc     ,00000] db_con_init called                                    29 0.000110
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                             50 0.000160
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/P01/SYS/exe/run/dboraslib.o' ...
4 ETW000                                                                              43 0.000203
4 ETW000 [dev trc     ,00000] load shared library (/usr/sap/P01/SYS/exe/run/dboraslib.o), hdl 0
4 ETW000                                                                           13346 0.013549
4 ETW000 [dev trc     ,00000] Library '/usr/sap/P01/SYS/exe/run/dboraslib.o' loaded
4 ETW000                                                                              32 0.013581
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000                                                                              35 0.013616
4 ETW000 [dev trc     ,00000] Version of '/usr/sap/P01/SYS/exe/run/dboraslib.o' is "700.08", patchlevel (0.46)
4 ETW000                                                                              53 0.013669
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000                                                                              34 0.013703
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000                                                                              53 0.013756
4 ETW000 [dev trc     ,00000] New connection 0 created                              23 0.013779
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              39 0.013818
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                         45 0.013863
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              32 0.013895
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              37 0.013932
4 ETW000 [dev trc     ,00000] Got LIBPATH=/usr/lib:/lib:/usr/sap/P01/SYS/exe/run:/oracle/P01/102_64/lib from environment
4 ETW000                                                                             325 0.014257
4 ETW000 [dev trc     ,00000] -->oci_initialize (con_hdl=0)                         47 0.014304
4 ETW000 [dev trc     ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8          3234 0.017538
4 ETW000 [dev trc     ,00000] Logon as OPS$-user to get SAPSR3's password           28 0.017566
4 ETW000 [dev trc     ,00000] Connecting as /@P01 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000                                                                              34 0.017600
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              35 0.017635
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1 0x110f8b9c0 0x110fa3e38 0x110fa36e8
4 ETW000                                                                              36 0.017671
4 ETW000 [dev trc     ,00000] Allocating service context handle for con_hdl=0       37 0.017708
4 ETW000 [dev trc     ,00000] Allocating server context handle                      24 0.017732
4 ETW000 [dev trc     ,00000] Attaching to DB Server P01 (con_hdl=0,svchp=0x110f94398,svrhp=0x110fa6158)
4 ETW000                                                                              72 0.017804
4 ETW000 [dev trc     ,00000] Assigning server context 0x110fa6158 to service context 0x110f94398
4 ETW000                                                                           36191 0.053995
4 ETW000 [dev trc     ,00000] Allocating user session handle                        73 0.054068
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=0x110f94398,srvhp=0x110fa6158,usrhp=0x110f937a0)
4 ETW000                                                                              43 0.054111
4 ETW000 [dev trc     ,00000] Assigning user session 0x110f937a0 to service context 0x110f94398
4 ETW000                                                                           10613 0.064724
4 ETW000 [dev trc     ,00000] Now '/@P01' is connected (con_hdl 0, nls_hdl 0).
4 ETW000                                                                             964 0.065688
4 ETW000 [dbsloci.    ,00000] *** ERROR => ORA-942 when accessing table SAPUSER
4 ETW000                                                                            1183 0.066871
4 ETW000 [dev trc     ,00000] Disconnecting from connection 0 ...                   73 0.066944
4 ETW000 [dev trc     ,00000] Rolling back transaction ...                          28 0.066972
4 ETW000 [dev trc     ,00000] Closing user session (con_hdl=0,svchp=0x110f94398,usrhp=0x110f937a0)
4 ETW000                                                                             146 0.067118
4 ETW000 [dev trc     ,00000] Now I'm disconnected from ORACLE                     409 0.067527
4 ETW000 [dev trc     ,00000] Try to connect with default password                  23 0.067550
4 ETW000 [dev trc     ,00000] Connecting as SAPSR3/<pwd>@P01 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000                                                                              34 0.067584
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              36 0.067620
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1 0x110f8b9c0 0x110fa3e38 0x110fa36e8
4 ETW000                                                                              36 0.067656
4 ETW000 [dev trc     ,00000] Assigning username to user session 0x110f937a0        22 0.067678
4 ETW000 [dev trc     ,00000] Assigning password to user session 0x110f937a0        41 0.067719
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=0x110f94398,srvhp=0x110fa6158,usrhp=0x110f937a0)
4 ETW000                                                                              37 0.067756
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000                                                                           33690 0.101446
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                              36 0.101482
4 ETW000 [dblink      ,00431] ***LOG BY2=>sql error 1017   performing CON [dblink#3 @ 431]
4 ETW000                                                                             122 0.101604
4 ETW000 [dblink      ,00431] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#3 @ 431]
4 ETW000                                                                              34 0.101638
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'P01'"

Datasources . problem with the new Source System

Hi friends!
The ECC client were copy and now I have a new source system for this.
If I select source system / verify, the msg is: ok
In can read some data from the new ECC (ie: exchange rates updated), but I can not read any records using the datasources.
The replication in Bi were done, and the data in source system is ok.
-> What is wrong?
Thanks!

Check the profile parameters in WE20,We21... and also check scc4

There is no PSA for InfoSource 8ZCCA_O09 and source system BWPCLNT800 RSAOD

Hi All:
We make a Heterogeneous system copy of BW 3.5. from Solaris 9-Oracle 9i to AIX 3.5-Oracle 9i.
We must have to rename the Logical System Name and during the Functional Testing the users configured the conections again in RSA1 transaction, then they start the
testing phase but get the next error in the Monitor-Administrator Workbench:
"@5C@ 28.02.2008 19:59:31 There is no PSA for InfoSource
8ZCCA_O09 and source system BWPCLNT800 RSAODS 203"
We can see that the errors refers to the old (BWPCLNT800) Logical
System Name; during the configuration of the RSA1 they renamed the
Logical System Name of the BW System to BWNIUSA800.
We found the SAP Note 518426 but we are not sure about if we can
execute it without affecting the system or the configuration.
Some one Can help us ?.
Best Regards
Reynaldo Rebolledo.

Hi Reynaldo,
this forum here is related to SAP NetWeaver Master Data Management. Your question seems to be related to SAP BI. Please raise your question in the [BI Forum|/community [original link is broken];, because I do not think that you'll find the experts to answer your question here.
BR Michael

Migrate Dataservices source system to new source system type in BW 7.3

Hi All,
We have upgraded our BW system to 7.3. In our old 7.0 environment we have linked Data Services 4.0 as an external source system. Now in BW7.3 we would like to migrate the developments on the old source system to the new source system type.
Does anyone know if there is any migration tool which we can use for this?
Best regards,
F. Geldof

Hi Valerie,
Unfortunately i didn't find the answer yet. For the moment we have kept the old connection types to our DS environment.
Good luck!
Best regards,
F. Geldof

New Source System Client for BW

Hi All,
Currently we have R/3 QAS Clint 102 connected to BW QAS. We want to get rid of this Client 102 and connect a new QAS Client 100 (same server but different Client) to BW QAS. I created a new Source System (QAS100) in BW QAS and did a restore.
My question: How do I get all the Source system dependent Objects like InfoSurces, InfoPackages etc for the new Client 100 in BW QAS? Please help me and I promse to generously reward points.
Thanks, very much in advance.
Srini

Hi A.H.P,
I am pretty sure this will resolve the issue. I will come back again and reward 10 points once we apply a working solution.
Thank you for a quick reply.
Srini

How to transfer all the transfer structure to new source system ?

Hello
I have created a new source system on my BW system with new RFC connection .
I want to replace all my old transfer structure with old source system to this new system .
can u plz let me know how can i do this ?
Regards,

can u plz many help in this ?

Creating New Source System

Hi All,
I am trying to create a new source system in BW for the new R/3 client which is a copy of PRD.
So now new R/3 client is 200 and also PRD is 200. I did all necessary steps and i found difficulty when i am assigning logical system based on client. I found key is only client, so as PRD system is already mentioned with client 200 i am not able to create new entries and i hope this causing me error.
So by creating RFC destination directly in SM59 and when i tried to create it says PRD Client already available. Though i have specified new client server name.
Kindly advise.
This is quite urgent.
Thank You.
Best regards,
Bhuvana.

hi,
it seems rfc connection between bw and r/3 not established properly, check with transaction sm59 (ask basis help if no authorization), choose r/3 source system rfc and menu test->authorization. check if user name and password, hostname/ip address are correct.
this doc 'bw r/3 connectivity' may useful http://help.sap.com/bp_biv235/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
hope this helps.

New source system - same BI system - time estimate

Hello,
The project management of my current project has decided to create a new ECC QA system as copy from existing ECC QA with no data. The BI QA system will remain as it is.
How much work will this create for us in order to re-map the transfer structures in BI to the new system. Will I be able to use the same info sources (off course with new source system)? Any more work needs to be done?
We have about 8 info cubes including stock, sales, purchasing, PCA, loading data via 15 info sources + all masterdata..
Is this a quick and easy fix or a time consuming task?
Regards,
F C

Hello,
Yes, I agree. Just needed a second opinion! Thanks! This is a fresh installation so the amounts of data are quite small..
It should be possible to use the same info sources with some modification on source system and that's it.
Agree?
Regards,
F C

Transport InfoSources to New Source System

Similar Messages

Maybe you are looking for