Transport Of Authorization Objects

Hi,
I have created the authorization objects in Development server. After creating we have selected the Infocubes from the option 'Check for infocubes'. This is working properly.
Same I have transported to Quality. My reports are working but the authorisation objects has no impact.
I have transported only the info-objects and the auth objects. Please let me know do I need to transport the Infocubes which I have selected at the time of creating the auth objects. Because When I am viewing the auth objects in quality, no infocubes are seen (Check for infocubes option)
Please advise.
Thanks & Regards
Ramesh Ganji

hi
u need to transport the infocubes as well.
because rssm u link that authorization object with infocube.if u do not do this,your authorization object is not checked in queries for that infocube.
so u need to transport them and then tick them in rssm
hope this helps

Similar Messages

  • Transport of Authorization Object

    Hi ,
    I have created an Custome authorization Object in dev Box .
    can you tell me how to transport it to QA Box ?
    Thanks
    Pankaj

    Hello Pankaj.
    On RSSM transaction enter your authorization object, Select Transport object and Hierarchies button.
    Which prompts a screen,there select your object and select continue.
    In the next screen a list will display cancel that screen, now it would prompt you for a transport request.
    Enter the type of request you wish to create as "Workbench Request" then provide you request name else create it.
    Thus would be available in SE09 screen.
    Assign points if helpful.
    Regards

  • Error in Transport of Authorization Object

    Hi,
    I have created a authorization object in my development and transported it to testing. In the transport log I can see that it was succesfully imported but I am not able to see the Authorization object in SU21 of testing system but I tried to see that Authorization object through SUIM and able to see that object.
    I tried to create a sample role and assign this authorization object manually to that role but not able to do that.
    Can any one help me in this issue.

    Hi Martin,
    Thanks for the reply
    Yes I forgot to transport Authorization class. I have done that now and able to access the Authorization object.
    Can you please let me know the complete process whether we have to transport only Authorization class...
    Then the Authorization object will be transported on its own..
    Thanks in advance

  • Problem in transporting authorization object

    Hi,
    I am facing a problem in transporting the authorization object. We have an existing cube in development and production. In production the object has 3 authorization objects checked. Now I want to change the authorization object assignment in my cube. So I changed the assignment in the development, but when I tried to transport the authorization object it collected all the cubes where the authorization object is used.
    I want to transport only the authorization object associated with that cube, not all. I understand that logically if we are transporting the authorization object from RSSM, it takes all the assignments. But I don't want to do that because there may be some inconsistencies between the system.
    Can you tell me weather we have any other way, so that the authorization object is transported only for one particular cube assignment not all.
    Thanks in advance
    Prashant

    Hi,
    I tried that but not getting anything.
    Can you please tell me the steps.
    Steps I have done are as follows.
    1. Go to RSSM and select the authorization object.
    2. We have a button which says transport authorization object. I clicked on that.
    3. I got a list of all the authorization objects there. I selected my authorization objects and clicked on Transfer Object button.
    4. Then I get the hierarchy authorization objects.
    5. After that I selected a request and everything is included in that request. I didn't got your above mentioned option.
    Do you want me to go to the table RSSTOBJDIR and delete all the other entries??
    It would be great if you can tell me the steps to do that.
    Thanks in advance
    prashant

  • Transporting authorization object (RSSM)

    Hi,
    I am having problem transporting my BW Custom authorization object over to the Quality system.
    I have successfully transported the table contents RSSTOBJDIR to the Quality system. However, when I search for the authorization object in RSSM in Quality after the transport , it complained saying u201Cobject is not available. Create?u201D
    How can I transport the authorization object?
    Thanks for your time.
    Regards,
    Raja

    Yes you can transport an authorization object.
    It should give you an option to create a TR which creation of the auth obj in RSSM. If you have not done that then try to make a small change and see if it requests you to create a TR. If still you are not able to do it, then try adding the objec of typr R3TR - SUSO and give your authorization object name in SE03.
    Regards,
    Gaurav

  • Transport Authorization object

    Hi,
    I hope someone can help me with this issue:
    I tried to transport an Authorization object but when it's in productive, the part of the infocubes doesn't appear, If I select Check for Infocubes ( tr RSSM), it's empty. But in the develop system appears the infocubes.
    So I don't know if I have to do something else.
    I'll appreciate a lot if someone help me
    Thanksªª

    Hi
    Transport ur cube once again and just cross chek  wat is mising  in ur prod system or wat ever sys u are comp to with ur delv sys and  after moving it just chek if u can see data in ur cube,i think if it was showing u authorization prbm in the dev system it will show u the same thing in the prod system(RSSM) and if it shows the authorization prbm, ask ur basis team to give u the authorization for particular object which ever is being restricted to u
    thanks
    puneet

  • Transport authorization objects in BW

    Hi gurus,
    I have this problem regarding authorization objects for reporting in BW:
    I hace created in DEV some authorization objects and linked them to some infoproviders.
    When I make the transport to PRD system, I can see these objects but they are link to other inforproviders and not the ones that are marked in the dev system. The OT doen´t seem to have any trouble, but ¿why has this happened?.
    As you know, I can´t select the correct infoproviders in prd system, and moreover I can´t erase them because I have already created profiles using these objects.
    I think an option would be to pass again an OT, but I think the same problem may arise again.
    I would appreciatte any kind of help.
    Thanks,
    Luis

    It's the same as you would in another system.
    SE84 -> Other Objects -> Auth Objects
    Choose your object and then there will be the option to transport it in menu item Authorization Obj's

  • Open Authorization Objects in role after role Transport

    Hi All,
    I have transported a R/3 (ECC6, support) role from Dev to QA and Dev (Multiple clients). After transport, Role has authorization tab with status (green) but when i display authorization data i found one new open authorization object (yellow).
    I already have generated profile before tranporting. Role is also okay in  Dev other clients (We have multiple clients in Dev) with status green and no open authorizations (yellow)
    Any feedback/suggestions ?
    Thanks in advance
    Khasim.

    This happens when PFUD runs at the same time as you are generating the role. Refer to this note: 355030 - Loss of authorizations after profile generation. Another remote reason could be if your source (DEV) and target (QA) systems use different characters sets. (Note #535554).
    If it is the former case, re-transporting your role may just be the solution for you. Just re-generate the role in DEV and initiate a new transport.
    Hope this helps.
    Ashutosh

  • Transporting Authorization Object

    Hi All,
    We are having two autherization objects.But we use only one in production. we noticed that the other object is also active in production. I checked in development and it is not active. So i need to capture it from development and transport to make the object inactive in production also.Can any one guide me out in this scenario.I checked in RSA1 Transport connection.But i couldnt find authorization objects there.I think we need to approach in another way.
    Any suggestions will be more help full....

    Hello,
    Assuming by inactive you mean the checking for particular infoproviders.
    De-activate a checking for the selected infoproviders and press the Transport Hierarchy Authorizations, InfoProvider button in the bottom of the RSSM transaction. Hit cancel on the hierarchy auths screen and select the auth object for hwich you want the settings transported. In the transport requst, table entries for table RSSTOBJDIR should be visible.
    Whenever an InfoProvider is activated for the first time (through transport or otherwise), it is automatically turned on for all auth objects to which it might be related.
    You might want to enable auth check maintenance directly in the production system. Makes life easier.
    Cheers
    Aneesh

  • Transport Authorization Objects

    Hi all,
          Can you please clarify this issue. Is it a good practice to transport authorization objects from Dev to Q/A to Prod or create them separately in all the three environments. I transported the roles but I am not certain about the authorization objects.
    Thank you for your time,
    Ram

    Hi,
    It is a policy decision what will be the source system of your authorizations. From there you can use the transport system to spread the roles over the landscape. To keep everything in sync, use the transport system otherwise in a matter of time you have no idea which is coming from where.
    have fun
    Jan van Roest

  • Reg: Transporting Authorization Objects

    Hi,
    If a custom authorization object has been created, can someone please guide on it to be transported across landscape.
    Regards,

    Hi,
    Yes. create a workbench request and open it in change mode.
    Now you will have table with editable fields with 3 fields.
    1. In programID field enter R3TR
    2. In object type field enter SUSO
    3. In Object name field enter the respective Z authorization object.
    You also need to make sure that the respectie class is available in the target systems. if not, repeat the above procedure with object type as SUSC.
    Regards,
    Gowrinadh

  • BW Authorization Object to restrict Transporting Requests

    Hi...
    In our BW systems, all the developers are given the profile SAP_ALL. So, the developers have the access to transport their objects from BW Development(BWD) client to BW Quality(BWQ) Client and from BWQ to BW Production client (BWP).
    I want to restrict the developers to do the transports. What is the authorization object used to restrict the users to transport requests?
    Any documentation how to do that?
    Thanks,
    Sai.

    It can be done with the authorization objects S_TRANSPRT and S_CTS_ADMI.
    S_TRANSPRT creating transport request and S_CTS_ADMI for moving transport request.
    I would like to work on that project where I can get SAP_ALL access..:)
    Check the documentation.
    http://help.sap.com/saphelp_nw04/helpdata/en/8d/45ef39521e3314e10000000a11402f/content.htm
    Thanks.

  • Authorization objects in transport request

    Hi All,
    I'm trying to get a table that contains all the authorization objects that are included in a transport request. I only can get the object list but without the authorization values for each object.

    Hi,
    As per your query this can be see in suim t-code.
    If you have any specific error or query then pls put it here then you will get the solution.
    Anil

  • Authorization Object is not working when report is modified.

    Hi BW Guru's
    We have Company Code as Authorization Object .and we have 3 company Codes (xxxx,yyyy,zzzz).where the users under Company code xxxx are not supposed to view company code yyyy,zzzz data etc.
    I modified an existing Report and transported to production.But the Authorization Object is not working for that report.The Report is defaultly displaying all the company codes data(xxxx,yyyy) for all the users.But for the other reports its(company code ) is working fine.
    What could be the problem?Is theproblem in transporting the objects.But i transported all the objects inluding auhorization object.
    Please send me the solution as it is very much urgent.
    The solution will be def. awarded with full points.
    Regards
    Sanjay

    hi Sanjay,
    please don't post the same question again, check and response back from your previous thread
    Re: Authorization Object is not working when report is Modified.
    hope this helps.
    would be nice if you reward for helpful answers to all of your previous postings, e.g
    docs related to RRI

  • How to add function group to the  authorization object S_RFC ?

    Hi All,
    Can you  please tell you how to add the function group FG_DIAGLS_DATA_ENRICHMENT  to the authorization object
    S_RFC?
    In solman_setup under basis configuration when I execute the step "SetupDPC/DCC Web Service URL" its getting failed because of the
    following error which i found it in the agent log
    "java.rmi.RemoteException:RfcExecutionException; nested exception is:
    com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An
    exceptionoccured during the execution of the function
    'FM_DIAGLS_PUSH_PHYSICAL_HOST': RFC_NO_AUTHORITY >
    com.sap.sup.admin.abap.rfc.exception.RfcExecutionException:An exception
    occured during the execution of the function
    'FM_DIAGLS_PUSH_PHYSICAL_HOST': RFC_NO_AUTHORITY >
    com.sap.mw.jco.JCO$Exception:No RFC authorization for function module
    FM_DIAGLS_PUSH_PHYSICAL_HOST. <Mid"
    Thanks,
    Satheesh E

    Hi,
    Please follow below steps:
    1) Go to SE01
    2) Click on create New workbench request and give desc once popup appears, Click Ok
    3) Now open the trasport in edit mode
    4) Add
    Program ID - R3TR
    Object Type - FUGR
    Object name - Name of the Function group
    >note that if you tranport Function group all the latest Function modules in function group along
    >with screens will be included in the transport.
    Regards
    Shital
    Formatted by: Vijay Babu Dudla on Apr 25, 2009 5:08 AM

Maybe you are looking for

  • Experiencing strange performance issues after a hard drive failure - Help!

    I bought my mid-2012 i5 Macbook Pro in December of 2012. I realized when shopping for computers that I wanted an SSD installed, but that it would be a lot cheaper if I bought the SSD and installed it rather than customizing it in the Apple Store. So

  • Audible Ring for LG Smart TV

    I know this has been brought up before, but does anyone know if there is movement towards solving the problem of no audible ring for incoming Skype calls on the LG Smart TVs? Hey! Kind of useless without it.

  • MDT Redirection to homepage

    Hi, We have migrated from 4.7 to ECC 6.0. In integrated ITS in an MDT report when there is no data for the selection parameters entered in the selection screen, the screen just disappears. While in standalone  ITS when data is not there it is redirec

  • CRMD_BUS2000108 - organizational unit and attributes for org. unit

    Hi all! As I'm customizing Lead creation (and in a second step lead generation) I would like to receive tips about "selection of organizational unit and attributes for org. unit". I expected that, by entering a BP number of a prospect or sold-to part

  • Why can't I open my video in imovie on my Ipad?

    I created a video in IMoive in my Mac but I cannot open it in my Ipad.  I have opened it in ITunes and moved it to the IPad but when I open IMovies on the IPad and try to download but it says the there is no file.  Any help would be appreciated.