Transport of Release Prerequisites and Release Indicators

How the release prerequisites and release indicators in the Release strategy get transported.When we were trying to transport only strategies are getting transported.

Hi
Number ranges you have to create directly as it is not transportable.
For release Strategy details, all your Release config details are transported Except for the below details
1. Characteristics &  values assigned to it ( master data)
2. Class & assigned characteristics to it (master data)
3. Values/ranges inside the Release strategies ( classification details).
These three details are to be recreated/assigned in the client you intend to work upon.
Regards
SAM

Similar Messages

  • Transport of Release Prerequisits and Rlease Indicators in Startegies

    How the release prerequisites and release indicators in the Release strategy get transported.When we were trying to transport only strategies are getting transported.

    Goto This thread http://www.sap123.com/showthread.php?t=59
    it will explain you averything

  • Transportation of release strategy

    Hi guys,
    We heard that in ECC 6.0, we can transport release strategy for PRs and POs along with characteristics and classes.  I have the following doubts on this
    1) Can we transport the values assigned in the strategies also with this functionality ?
    2) From MM side can we configure the strategies in the normal way i.e. creating characteristics, creating classes, creating release groups, creating release indicators, configuring release strategies (or) we need to follow any other procedure for transporting the strategies
    Any suggestions on this

    Hi
    I dont think this functionality exits of transporting the charcterisitcs & classes.
    In ECC 6.0 also this functionality does not exist as per my knowledge.
    Jurgen Thank you for the SAP note
    Thanks & Regards
    Kishore

  • Transport of release strategies

    Hello all
    Could anybody explain me how to transport release strategies (classification)? I found the note 45951, but is not clear for me.
    First, how do I have to save the changes on SPRO-Material management-Purchasing-Purchase requisition-Release procedure-Procedure with classification-Set up procedure with classification-Release strategies? I tried with menu Table view-transport is this correct? if not, how do I have to do?
    Then, when I have a transport number which are the following steps?
    Could anybody help me?
    Thank you in advance.

    Hi Henrique,
    The transport of Customizing data in the release procedure area 'Release strategies' can only be used in a restricted manner. The 'Transport' function displayed in Customizing under 'Table view' only takes the
    release strategies into account but not the dependent data of the release prerequisites, the release statuses and classification data.
    If you want to transport release strategies, proceed as described below:
    1. Transport of release strategies (entries in table T16FS)
    Use the transport function Customizing under 'Table view' -  'Transport'.
    2. Transport of Release prerequisites (entries in table T16FV)
    You can display all required entries of table T16FV which contains the release prerequisites for the corrresponding release strategy using the table display Transaction SE16 specifying the release group to be transported and the release strategy. Implement these table entries manually in a transport request.
       Program ID:                   R3TR
       Object type of the element:   TABU
       Object name:                  T16FV
       Client                           Client
       Release group                 Release group
       Release strategy              Release strategy
       Release code                  *
    3. Transport of Release statuses (entries in table T16FK)
    You can display all required entries of the table T16FK which contains the release statuses for the corresponding release strategy using the table display of Transaction SE16 specifying the release group to be transported and the release strategy.
    Implement these table entries manually into a transport request.
       Program ID:                     R3TR
       Object type of the element:     TABU
       Object name:                    T16FK
       Client                          Client
       Release group                   Release group
       Release strategy                Release strategy
       Release code                    *
    4.  Transport of classification data into release strategy
    Read Note 45951.
    Transport class type 032 (release strategy), the class, which you use for the release procedure, and the characteristics which are assigned to this class.
    >> Above instructions extracted from note 86900 <<
    Hope it helps to solve the issue!
    Cheers,
    Eduardo Junior

  • Can i transport PO Release strategy in a request

    Hi Gurus,
                     I have done po release starategy in dev can i transport the release strategy in a request to quality client or should i do the same setting again in quality server.
    Regards,
    Dheepak

    hI
    1- Release classification is a master data which you can not transport and need to maintain in each client.
    2- Goto Txn -- CL24n in Qly or PRD
    3- Enter release class and class type then enter ,there you will get all your strategies select the strategy you want to maintain and details there you can maintain the values.

  • What are the Transport Request Release Functionality ?

    Sap Specialist,
                         Kindly tell me, I have following Doubt in <b>Transport Request Release</b> .                        
                         If we Realease any one Transport Request from SE09 in Developement Server,
                         What are the Functionalities Called ?
                         And How is it Export to Production Server ?

    Hi,
    kindly go through the following hints.
    Transport Request within same Server Different Clients
    I have 3 clients under one SID (dev 130,140,150). 
    And we have more than 400+ transport requests in client 130.  How can we transport these requests to other clients of 140 & 150.  If I want to use tcode SCC1, that can be done only one tran. request at one time. 
    Do I need to write a script within unix? 
    Try STMS.
    Click on the "import overview"
    Double click on your target system
    Click "refresh"
    Click on "import all request" or ctrl+F9
    Specify the target client 
    Execute the transport
    Done...
    Thanks,
    Shankar

  • How to track Transport request released

    hi Experts,
    How to track Transport request released from one development system (D01)to another
    development (D02).
    is there any way we get know .
    Amit

    Hi,
           From SE09 & SE10 you track the transport requests, and even you can find the transport request details from the following database tables.
    E070                             Change & Transport System: Header of Requests/Tasks
    E070A                            Change & Transport System: Attributes of a Request
    E070CREATE                       Change & Transport System: Creation Date of Request
    E070DEP                          Change & Transport System: Dependencies of Requests
    E071                             Change & Transport System: Object Entries of Requests/Tasks
    E071C                            Change & Transport System: Client-Specific Lock Flag
    E071E                            Lang. Transport: Positive List for Generic Object Selection
    E071K                            Change & Transport System: Key Entries of Requests/Tasks
    E071KC                           Change & Transport System: Key Entries of Requests/Tasks
    E071KF                           Change & Transport System: Nametab Info. on (CHAR)Key Fields
    E071KFINI                        Change & Transport System: Nametab Info. on (CHAR)Key Fields
    E071K_30                         Change & Transport System: Key Entries of Requests/Tasks
    E07T                             Change & Transport System: Short Texts for Requests/Tasks

  • ALE methodology to transport the release class

    How can I use ALE methodology to transport the release class, release characteristics and release characteristic value assignment from one client to another client ?
    please explain with clear steps.

    Hi
    Step 1: Move Characteristics to the target system/client (ALE).
    i). In the source system/client, execute transaction BD91
    This generates one idoc (logical message type CHRMAS) for each characteristic.
    ii). In the source system, check the status of the outbound idocs using transaction WE05, selecting message type CHRMAS.
    All outbound idocs should be in status 03 (Data Passed to Port OK).
    iii). * Only exception is when target system is D94 client 110. In this case the idocs go to status 30 (IDoc ready for dispatch) and an extra step is required to release the idocs to the target system. In this case, using transaction SE38, run report RSEOUT00 to release the idocs. 
    iv). Check that the idocs were received and posted in the target system:
    Log on to the target system & execute transaction WE05, selecting logical message type CHRMAS.
    v). If any idocs are in status 64, run transaction BD87 to re-process these to status 53.
    Step 2: Move Classes to the target system/client (ALE).
    In the source system/client, execute transaction BD92
    This generates one outbound idoc (message type CLSMAS) for each Class.
    Step 3: Check Config & classification data in target system/client
    Hope it helps
    Thanks /Karthik

  • How can we transport the partner profiles and Port configurations

    Hi everybody,
    How can we transport the partner profiles and Port configurations. While creating these , system will not ask for Dev class and we cant assign any Transport request number. Then How can we transport these settings?
    Your replies are really apreciable.
    Thanks and Regards,
    Vijay.

    Hi,
    please have a look of the OSS note: 182172
    >>
    The partner profiles are stored in the following tables:
    Table EDPP1: General partner profile
    Table EDP12: Partner profile outbound, additional data NAST
    Table EDP13: Partner profile outbound
    Table EDP21: Partner profile inbound
    Table EDIPHONE: Connection to SAP telephony (optional)
    You can use R3TR TABU to manually set the tables into a Customizing request (as of Release 46, into a SYST-type request).
    <<
    Rgd
    Frédéric

  • How to transport a transaction variant and her related screen variant?

    Hello to every SDN member,
    I am looking to transport a transaction variant and the related screen variants.
    I read the help and I am concerned by the paragraph about the Client-specific transaction variants because when I created the transaction variant, no dialog box appeared.
    In the paragraph about the Client-specific transaction variants, it is told to transport the variants with the Transport function but the problem is that I cannot find it. How can I use this function? It is not in the toolbar and not in the differents menus.
    Can you please give me the solution to transport the transaction variant and the screen variant?
    Thank you very much in advance.
    Best regards,
    Matthieu Chérier

    Hi,
    You can transport a variant by :
    1. Running the program RSTRANSP. Mention your program and variant name there.
    2.Create a variant with prefix 'CUS&'. This type of variants will be automatically transported to target system through transport request.
    3.Go to Se38 --> Input report name --> Select Variants
       On the screen  --> Go to Utilities -> Select transport request
        --> Provide the program name and Variant --> Assign Transport request to variant. Then release the transport.
    Regards.

  • STMS - Transport Routes - Multiple Clients and Systems

    Hi Guys
    We are setting up a ERP Landscape based in four systems
    AED - Gold Development (Most Development starts from here)
    AEC - Customer Development (101,102,103...)
    AEQ - Customer QA (401,402,403,...)
    AEP - QA Production  (701,702,703,...)
    Our main goal is to release transports from AED 100 to all clients in AEC (101,102,103...)
    CTC was already set up to 1, and all system share a same Trans Dir
    For this purpose I have created a transport Group /SOD_DEV/ and added AEC 101, 102 and new clients would be added
    Only customizing request should be replicated on each client, and workbench only for one client.
    Then, I need also all the transports from AEC go their respective client transport queue in AEQ and AEP
    Example:
    AEC 101 --> AEQ 401 --> AEP 701
    AEC 102 --> AEQ 402 --> AEP 702
    And in the future it should be able to expand to
    AEC 103 --> AEQ 403 --> AEP 703 and go on.
    My questions are:
    Should I create a Transport Group for Customizing and Transport Layer for Workbench? O can I use a single Tranport Layer for both Workbench/Customizing?
    How can i create a route from AEC so transports who got imported in 101 are automatically delivered to 401 and then 701?
    Thanks
    Martin

    Hi Yuksel, thanks for your input.
    We agree with a tranport Group between AED and AEC. Transport layer is ZAED.
    All developments made in AED, are distributed to Transport Group /SOD/ to all AEC clients (100,101,102...)
    Now comes the tricky part
    for example, all requests that were imported in AEC 101 should be delivered to AEQ 401 and then delivered to AEP 701 only
    That why I didn't put a transport group between AEC and AEQ, since it should be a dependency.
    Any transport that was imported on AEC should follow their respective route
    Workbench: AEC 100 --> AEQ 400 --> AEP 700 (Sytem-Wide Workbench requests)
    Client 1: AEC 101 --> AEQ 401 --> AEP 701 (Client-Dependent Customizing)
    Client 2 :AEC 102 --> AEQ 402 --> AEP 702  (Client-Dependent Customizing)
    And it wiil follow with
    Client 3 AEC 103 --> AEQ 403 --> AEP 703 (Client-Dependent Customizing)
    It created these delivery routes; as example for Client1:  AED101-AEQ401 and AEQ401-AEP701. Is that correct?
    See attached the screenshot for better reference, you are welcome to further suggestions
    Best
    Martin

  • Transport of planning layouts and planning profiles (CO - Cost Center Acc.)

    Dear Experts,
    I am new to SAP CO and would like to transport new planning layouts and planning profiles. Therefore I clicked on transport and the following customizing task is added to my transport request:
    IMG Activity  Create Planning Layouts for Cost Element Planning
    -> ke34
    ->
    CEFORMC
    CEFORMF
    CEFORMS
    CEFORMT
    CEFORMV
    CEFORMW
    CEPRINT
    CESETS
    TKEBS 
    TKEP1 
    TKEP2 
    TKES1 
    TKES2 
    TKES4 
    TKES5 
    TKESK 
    The transport worked without error.
    Unfortunately none of the layouts arrives in test environment.
    Do you have any idea of what I could have forgotten?
    Thanks a lot!!
    Thomas

    After you have released the transport request, the objects of the request are available in the target system and the target clients. If you want to carry out a client copy within the same system, proceed as follows:
           1.      Log onto the system in the desired target client.
           2.      Start the client copy (Tools > Administration > Administration > Client Administration > Special Functions > Copy Transport Request; transaction SCC1) and enter the source client and the number of the transport request.
           3.      Then start importing the objects.

  • SPP Error - No valid transportation lane between Supplier and LOC1

    Hi
    While running the EOQ and SFT planning service, we get the following error
    "No valid transportation lane between Supplier and LOC1". LOC1 is the entry location for our BOD.
    We have not created any procurement relationships as we are working on a standalone SCM trialbox.
    Appreciate any help/suggestions to resolve this issue.
    Thanks & Best Regds
    Mitesh

    Hi Mitesh,
    You need to have valid transportation lanes from the supplier. Maintain it manually. If I remember correctly it is possible to have External Procurement Relationships in APO only (type 4) and not just contracts, purchasing inforecords or scheduling agreements CIFed from ECC.
    Hope this helps.
    Thanks,
    Somnath

  • PI 7.1 "stateless" service interfaces prerequisites and limitations

    are there  any prerequisites and limitations for "stateless" Service interfaces.
    We are directly implementing PI 7.1, (i.e not upgrading form 7.0 or 3.0).
    so for all our service interfaces, shall we safely use tne interface pattern "statelss" instead of "Stateless(xi 3.0 compatible)".
    if use the "stateless", are there any addition prerequisites or constraints/limitations.
    can we use abap proxies, java proxies, providing webservices via xi, and consuming other webserivces in xi, all adapters, asynch, synch scenarios with "stateless" interface patterns.
    In short, are there any things that can be done using "Stateless(xi 3.0 compatible)" and cannot be done using  "stateless" interface
    are there any specific requirements for using "Stateless(xi 3.0 compatible)" even in newly implemented PI 7.1
    thanks in advance,
    Madhu.

    When it is an upgrade from 7.0 to 7.1 the default Interface pattern is Stateless (XI 30 Compatible)
    Using Stateless Interface Patterns wont cause any harm/ restriction on any of the development.
    The only twist will be in the way a condition is specified in the Receiver Determination.
    For any Interface pattern (other than Stateless(XI30 Compatible)) you wont be able to see the message structure in the Condition Editor of Receiver Determination. All other functionality (Async, Sync, Proxy) will be available.
    In such a case Condition should be specified as shown in this blog: /people/abhishek.salvi/blog/2009/07/15/sap-pi71-receiver-determination-xpath-and-you
    Regards,
    Abhishek.

  • How to create a transport request with query and only with its structure.

    HI guru,
                how to create a transport request with query and only with its structure.transport request should not  include any other query items like ( variables, conditions...etc)
    thanks in advance.
    venkata

    Hi,
    Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
    Regards,
    anil

Maybe you are looking for

  • Upgrade SAP from ECC 6.0 EHP4 to ECC 6.0 EHP7

    Dear all, We are using ECC 6 ERP 4 SP5 with oracle 10.2g and Netweaver 7.0 EHP1. Other system release CRM 7.0 SP5 & CRM JAVA Release – NW 701 SP3 BI Release – NW 701 SP5 BI CONT 7.04 & BI JAVA Release – NW 701 SP3 We are planning to upgrade ECC 6 ERP

  • Why am I getting this

    I am trying to do a online application and get this message I tried to continue but nothing happens and then click on next one and nothing happens it shows it locked how do I unlock it. Attached is the photo. Thank you

  • Shelf life field in material master

    Hi,   For some raw material we want to maintain thta with shel life concept, along twith bacth management,  I have check in M01 for materila type ROW  but in out exisitng settings I have not found fields for entring the shelf life data in material ma

  • PIX Redundant Internet Line and Load balancing

    I would like to find out if it's possible to configure my Cisco PIX 525 to use a secondary internet line from a different provider and perform load balancing. I'm using PIX Version 6.3(1)

  • Bill value of Billing plan in CRM

    Hi All, can you please suggest on FM or method to get the Bill value of Billing plan in CRM. Thanks in advance. Subhankar