Transport release strategies

Hello!
I have a question how to transport the release strategies (class, characteristics) from one client to another?
Is there any pogram through se38?
Thank you!

Landra,
You can transport the release strategies configuration from one client to another, but class and characteristics you have to create in all client and it will be good, if you will create the class and characteristics before transporting the configuration.
Regards,
Manish

Similar Messages

  • Transport of release strategies

    Hello all
    Could anybody explain me how to transport release strategies (classification)? I found the note 45951, but is not clear for me.
    First, how do I have to save the changes on SPRO-Material management-Purchasing-Purchase requisition-Release procedure-Procedure with classification-Set up procedure with classification-Release strategies? I tried with menu Table view-transport is this correct? if not, how do I have to do?
    Then, when I have a transport number which are the following steps?
    Could anybody help me?
    Thank you in advance.

    Hi Henrique,
    The transport of Customizing data in the release procedure area 'Release strategies' can only be used in a restricted manner. The 'Transport' function displayed in Customizing under 'Table view' only takes the
    release strategies into account but not the dependent data of the release prerequisites, the release statuses and classification data.
    If you want to transport release strategies, proceed as described below:
    1. Transport of release strategies (entries in table T16FS)
    Use the transport function Customizing under 'Table view' -  'Transport'.
    2. Transport of Release prerequisites (entries in table T16FV)
    You can display all required entries of table T16FV which contains the release prerequisites for the corrresponding release strategy using the table display Transaction SE16 specifying the release group to be transported and the release strategy. Implement these table entries manually in a transport request.
       Program ID:                   R3TR
       Object type of the element:   TABU
       Object name:                  T16FV
       Client                           Client
       Release group                 Release group
       Release strategy              Release strategy
       Release code                  *
    3. Transport of Release statuses (entries in table T16FK)
    You can display all required entries of the table T16FK which contains the release statuses for the corresponding release strategy using the table display of Transaction SE16 specifying the release group to be transported and the release strategy.
    Implement these table entries manually into a transport request.
       Program ID:                     R3TR
       Object type of the element:     TABU
       Object name:                    T16FK
       Client                          Client
       Release group                   Release group
       Release strategy                Release strategy
       Release code                    *
    4.  Transport of classification data into release strategy
    Read Note 45951.
    Transport class type 032 (release strategy), the class, which you use for the release procedure, and the characteristics which are assigned to this class.
    >> Above instructions extracted from note 86900 <<
    Hope it helps to solve the issue!
    Cheers,
    Eduardo Junior

  • PO release strategies with Contract

    Hi,
    implementing a PO release strategy (SAP-MM module)I need to consider the case in which a PO is assigned to a Contract.
    If so, different release strategies should be selected according to the PO value.
    Possible cases:
    S0-strategy 0: Contract does not exist, PO value>=0eur
    S1-strategy 1: Contract exists, PO value>=100eur
    S2-strategy 2: Contract exists, PO value>=200eur
    Is someone aware if it is possible to activate such release strategy without defining manually in the characteristic for CEKKO-KONNR field all possible contract single values (entire range)?
    Thanks a lot for helping!
    Regards,
    Elisabetta Rizza
    Please contact me at following mail addresses:
    [email protected]
    [email protected]
    Hi Elisabetta,
    I've moved this here because it is a more appropriate thread.  BPX is the place for discussing the role of the buisness process expert.  This is a MM question
    Message was edited by: Marilyn Pratt

    Dear Amit,
    Requirement: If GR posting date exceeded 45 days than delivery date set in PO, then delivery date in PO has to be changed to current system date and at the same time New Release Strategy (B1) has to be triggered with one release code (02) automatically.
    So in that case the values in Release Strategy (A1) and (B1) would remain same,,, as you suggested we will assign the value 01 u2013 USRC1 to Rel Strategy (A1) and 02 u2013 USRC1 to Rel Strategy (B1) and the same we will try to incorporate in the coding of Exit u2018'M06E0004'
    We will check the process and confirm the same.
    Thanks for your suggestion.
    regards,
    Urendra Kumar

  • Block creation of PO if the release strategies is not applicable

    HI SAP,
    Can we block creation of PO if the release strategies is no applicable ?
    My release strategies is on the PO header. It's only work if the PO have one Plant only. If the user put more then one plant
    my release strategies will not work. how to solve this problem ?

    Hi,
    Check on it:-
    http://www.sapfans.com/forums/viewtopic.php?f=6&t=205684&start=0&st=0&sk=t&sd=a
    Re: Release Strategies in Purchase Order - possible values of caracteristics
    PO Release strategy question
    pherasath

  • Release Strategies in Purchase Order - possible values of caracteristics

    Hello,
    I have the following situation at hand.
    We use in a company code a release strategy for POs. One of the caracteristics is the "plant" (CEKKO-WERKS, multiple values). Strategy is working fine.
    Now I have to implement in another company code- in the same Client - the PO release strategy but this company code has about 800 Plants asociated! moreover, the release strategies in this new company are not dependent on the "plant"!
    I can not change the caracteristics in the Release strateg because this would affect the already working strategies  and SAP does not allow to asign another Class to the PO release groups.
    Is there any way I can prevent that I have to create release strategies with each of them 800 Plants in the caracteristics "Plant" ?
    Can I use something generic in the caracteristics field of the strategy?
    Thanks for any help. It would save me a lot of time!
    Aart

    Note 493900 - FAQ: Release Strategy
    1. Question :
    Why is the release strategy not determined?
    Answer :
    Please check the following points :
    You can not use Release without classification and Release with classification.
    If there is an entry present in Release Group table (T16FG-FRGOT) only release with classification can be used.
    If you use version management, the determination of the release strategy starts when the version is completed.
    You complete a version by setting the "version completed" indicator in the version tab.
    Cost Center values (CEBAN-KOSTL) and Vendor values (CEBAN-LIFNR) in the release strategy characteristics should be entered with leading zeros.
    This is true for the other structures as well (CEKKO and CESSR). See note 52225.
    For OVERALL RELEASE (purchase order and purchase requisition) the item fields such as Plant and Material Group will be aggregated to header level.
    For example you use Plant as one of your characteristics. If all items do not belong to the same plant then the relase strategy will not be found unless you have maintained a blank value as one of your allowed values for the characteristic Plant. If all items belong to the same plant then that plant is aggregated to the header; if one or more is different then a blank is aggregated to the header. See note 47089.

  • Purchase Order Release Strategies for Changed Amount

    Hi Gurus,
    We have a unique request from the business to set the release strategies for POs based on the Still to Deliver amount, not the Net Total Amount of the PO.
    Example: Configuration is PO total amount <$5K requires only L1 approval.  PO total amount >$5K requires L1 and L2 approval.  PO was created for $8K and was release using L1 and L2 approvals.  Receipts were posted to PO in the amount of $7K.  Now the buyer has added an additional line item for $1K.  The PO total amount now shows $9K ($8K + $1K), the Still to Deliver field shows only $2K ($1K from original remaining amount + $1K from new line item).  Business wants the release strategy for this change order to go through L1 only since the Still to Deliver amount is <$5K.
    Has anyone done this before?  Any ideas??
    Thanks,
    Gabe

    from http://help.sap.com/saphelp_40b/helpdata/fr/dd/2d547bb435d1118b3f0060b03ca329/content.htm
    User exit M06E0004 is provided to enable you to adapt the release strategy determination process to meet your requirements.
    This user exit allows you to change the communication structure for determining the release strategy for purchasing documents.
    The following user fields are available:
    USRC1
    USRC2
    USRN1
    USRN2
    In addition, communication structure CEKKOZZ is available, allowing you to use your own fields.

  • Are these requisition release strategies common?

    All,
    I’m designing new requisition release strategies for indirect requisitions at a chemical industry client.  I’d like to know how often you have seen the following sorts of design before:
    Existing design: Item-based release with workflow, with three dollar levels.  At the lowest levels, two strategies for each cost center approver (the one used is based on whether the desired vendor is foreign or domestic).  Characteristics assign several cost centers to each approver.  Strategies and codes are named for users, so we change configuration whenever someone changes jobs.  The codes are linked to positions, which are attached to user IDs.  Result: about 80 release codes and 140 strategies, taking a lot of time to maintain.
    Current redesign: Overall release, using 6 strategies and 6 codes based on dollar level and foreign vs. domestic.  A user exit selects the approver for each code from a custom table that stores the user IDs for each cost center, with a custom maintenance transaction for the table.
    Now the client wants both individual approval by cost center owner and items with different cost centers on a single requisition combined with approval of the overall purchase.  I’m considering item-based approval of requisitions, with the user exit and custom table, and adding overall approval of indirect POs with the overall approvers.
    Thanks for your help!

    Hi,
    No-Requisition release strategies are not common, one need to design release strategies based on business requirement. Release strategies looks simple after designing but its design needs creating thought to it.
    In your case, you can go for designing redesigning release strategies for Overall release with using 6 strategies and 6 release codes. Considering you have configured release strategies with all release values for PO document type ,PO value and Purchasing group. Now design a custom table and go for followings:
    Client---Pur Group--Rel Code1-- Rel Code2-- Rel Code3-- Rel Code4-- Rel Code5-- Rel Code6
    The search help is required to pull in purchasing group details from T024 table and SAP user ID from Table USR01
    Concept: Create Purchasing Group (OME4) as Department & assign the Department name to Cost center (KS01).
    For more refer a discussion:
    PR release: place holder for Cost center and Material grp
    NOTE: User training required crate requisition for one department only where only one cost center involved- No requisition creation allowed for multiple cost center.
    You can also go for other concept designing of your Requisition release strategies
    Regards,
    Biju K

  • Release Strategies not works - When multiple material group in a single P.O

    Hai,
    This related to Release Strategies in SAP- IS -Retail.
    The Material group was one of the character in the Rel Strgy. 
    1) If i create a P.O for the item which is related to " X" material group , Rel Strgy been set to P.O
    2) If i create a P.O for the item which is related to " Y" material group ,  Rel Strgy been set to P.O
    If I combine material group "X' & "y" in a same Purchase order , then RELEASE STRATGY NOT BEEN SET TO P.O .
    How to make this as possible in SAP -IS-Retail - Version 6.0
    Thanks,
    PS

    Hi,
    Generally it is not advisable to use item level characteristics for overall release . Please refer the sap note 493900
    Cost Center values (CEBAN-KOSTL) and Vendor values (CEBAN-LIFNR) in the release strategy characteristics should be entered with leading zeros.
    This is true for the other structures as well (CEKKO and CESSR). See note 52225.
    For OVERALL RELEASE (purchase order and purchase requisition) the item fields such as Plant and Material Group will be aggregated to header level.
    For example you use Plant as one of your characteristics. If all items do not belong to the same plant then the relase strategy will not be found unless you have maintained a blank value as one of your allowed values for the characteristic Plant. If all items belong to the same plant then that plant is aggregated to the header; if one or more is different then a blank is aggregated to the header. See note 47089.
    you have to maintain blank value in CT04 for material group and the same thing must be maintained for all strategies.
    The release procedure for purchasing documents is carried out on header level. For this, the following values are aggregated from the items on header level:
    item value
    plant
    material group
    Example WERK:
    The plant is only aggregated on header level if all items contain the same plant. If only one alternative plant exists, ' ' is aggregated on header level.
    A release strategy is then searched for with this value.
    Of course, a corresponding strategy is only found if the value ' ' was maintained for the characteristic 'Value' as an object value.
    The same functionality applies to the  plant

  • Purchase requisition : problem with check release Strategies

    Hi all,
    i created a new class, new release group, new release codes etc. I think all is ok but when i launch the transaction OMGQCK for check release Strategies the system give me an error in node 'Check re release indicators' : Define a release indicator for the status "released".
    But how can i do that, i created two release indicator : 'X' for blocked and 'V' for launched but what are the options for purchase requisition ?
    Is there a special value to give the release indicator 'released' ?
    Thanks for your help.
    Edited by: ToraTora on Mar 31, 2011 5:46 PM

    Hi,
    Goto SPRO -> Materials Management -> Purchasing -> Purchase Requisition -> Release Procedure -> Procedure with classification -> Setup Procedure with Classification
    select release indicator
    by default, you will be having the following release indicators in the system,
    1     Request for quotation
    2     RFQ/purchase order
    3     RFQ/PO no change of date
    4     RFQ/PO no changes
    A     Fixed RFQ
    B     Fixed RFQ/purchase order
    X     Blocked
    please check whether you have got these or else create and then assign them to the release strategies.

  • Tables for Release strategies

    Hi ...
    I was referring to MM table doc , in that it is mentioned table EBELN & EBELP are for Purchase Order header / Line and BANFN & BNFPO are for PR header/ Line.
    But for release strategy ...people told me to refer CEKKO for PO and CEBAN for PR.
    does it mean that release strategy refers to different tables for execution ( and I believe these tables are used for release strategy purpose only and if Yes then at what point PO / PR data gets updated in these tables)
    Regards
    Suresh

    Hi,
    Please find release tables used in MM.
    EKAB       Release Documentation 
    EKEH        Scheduling Agreement Release Documentation 
    EKEK        Header Data for Scheduling Agreement Releases 
    T161E       Release Codes 
    T161F       Release Point Assignment for Purchase Requisition
    T161G       Release Prerequisite, Purchase Requisition 
    T161H       Fields for Release Procedure, Purchase Requisitio
    T161I        Determination of Release Strategy 
    T161S       Release Indicator, Purchase Requisition 
    T161U      Texts for Release Indicator 
    T163P        Release Creation Profile 
    T163S        Description for Release Creation Profile 
    T16FB        Release Indicators: Purchasing Document 
    T16FC        Release Codes 
    T16FD        Description of Release Codes 
    T16FE        Descriptions of Release Indicators: Purchasing Do 
    T16FG        Release Groups 
    T16FH        Descriptions of Release Groups 
    T16FK        Release Statuses 
    T16FS        Release Strategies 
    I think, it will help u.
    Ishu

  • Stop Re-triggering of PR release strategies for closed PR's.

    Hi,
    Scenario is like, PR raised and converted it into PO and material has been received.
    After Receipt of material, system is allowing to change the quantities by un-releasing the release strategies.
    Once material receipt is completed, system should not allow to change in / revoke the release strategies.
    Please suggest.
    Thanks in advance.
    njs

    hi
    plz check ur release indicator in spro >mm>pur>pr>rel>
    here select the rel indicator and check the changability option in bottom it has to be 6
    hope it help
    regards
    kunal

  • Active release strategies

    Dear SAP GURUS,
       Is there a transaction code where i can have a look at all the active release strategies.
    Thanx,
    Fayazuddin Syed.

    Dear Syed fayazuddin ,
    You can figure it out at CL24N or CL20N.
    Example :
    Transaction CL24N
    Class        => Fill in class name  
    Class Type :     032
    If it was active, then you will see
    status field = 1     Released and with the "Green Tick" icon.
    or else:
    2     Locked
    3     Incomplete
    Sometimes, if you are having inconsistency/corrupted for your release strategy, you will also see some
    message indicate that you had inconsistency in these transaction
    Thanks
    Loke Foong

  • Transport release

    Hi everybody,
    I have an ocean in my mind!!! I know that it's something easy but I can´t clear it. May be you can bring light to me.
    I have a Workbench transport release with many ABAP Programs. I released it for sending to QA environment. When I check the transport log I notice that some programs are in red (not all the ones that are inside the order).
    My question is, I have to send back in another release all the objects or only the ones that has problems (the red ones)?
    Thanks & many kind regards,
    MM.

    Hi MMP,
    the red ones could not be imported and activated for a reason. You can try again after finding the reason and correcting the situation.
    It should not be required to repeat the transport for all objects, but it won't hurt.
    Regards,
    Clemens

  • Restrcuturing of PR and PO release strategies - corporate policies

    Hello,
    I´m in a proyect where a multinational company wants to restructure its PR and PO release strategies.
    We are in the fase of defining corporate policies as guidelines for the new structure.
    The multinational Holding contains Productive companies, distribution companies and other type of companies like investigation companies.
    I would like to have some feedback about how to guide the company management in this process off defining corporate policies.
    How does one or can one estandardize the release levels, release codes and amounts which separate the levels, in a diverse multinational.
    Are there any paradigmas, methods to acomplish this.?
    If anyone has experience with these kind of processes, please give me some feedback on how they tackled these issues.
    Thanks,
    Aart

    Hi,
    Normally when a company is coming into the sap , which have many business at various locations / countries , a structure will be defined in the SAP for the company as company code under which the plant and below the structure will be defined .
    However when comes to purchasing and for PRs POs , SAP give a communication strusture called CBAN for PRs and CEKKO for POs which can be viewed at SE16 . Thease tables contains the fields upon which the release strategies can be made .
    For example , say for one of your productive company , the company code created is XXXX and the plant under which is YYYY say , the policy can be for a groups of buyers which comes under the plant for a PO level , who can be the approver . Here for differrant PO/PR values differrant approvers can be added as strategies and based upon which the approval can be happened . and the approvers be the release codes .
    There are no standard paradisms rather , prior come into purchasing the organization structure be made.
    After that based upon the business/product , with in that company code defined , the levels can be defined in that perticular business .for purchases .
    In purchasing , to fhe plant / purchase group / storage location etc plays important and normally for a set of buyers/p grps , in that plant or group of plants in that company code , the levels of the PO/PR values can be defined for differrant strategies .
    Once at corporate level , the company code / plant is defined and under that the release strategy is easy to define .
    Regards,

  • RCCLBI01 and Purchase Requisition Release Strategies

    I'm trying to use RCCLBI01 to load Release Strategies.  I've found a few threads on it but they don't tell you what you can and can't do with it.  I know I can load the characteristic values for an already existing Release Strategy, but I have hundreds of Release Strategies that I need to create. 
    Will this load the strategies as well, or do I really have to go create them by hand in SPRO first then run it?  Or is there another program that will load strategies and the codes and the characteristics?

    Kris,
    RCCLDI01 is now used. However Here's my view:
    1. You will have to create chracteristics to begin with. I hope the number is not huge as it will narrow down the functionality otherwise.
    2. The class-- How many would you create?? I don't believe you would need a Batch input program to create a class as I believe there could not be more than a handful, unless necessary
    3.Now the classification.. the buggest task of all, where you could run in to hundreds.. Maintaining them is a nightmare and you'd have to have your strategies first.. I do not know of any input program to create Release strategies. So my answer is "a manual task"
    4. RCCLBI02  is of no help here for release strategies.
    5. I would rather use TCODE: CLMM to do the mass changes.. it makes life a lot easier.
    6. The last option is for some one technical to help you create a script to load the data.

Maybe you are looking for

  • Send email from custom workflow to group

    Hi! We have Office 365 A2 Plan subscription. We use InfoPath form to submit travel request and custom 2013 workflow made in Sharepoint Designer 2013 to route that form for approval. If we send email using workflow to individual user it works fine. Pr

  • Smartform to convert as pdf attachment and sending mail.

    Program to convert smartform as PDF and send PDF as an atachment to email id. ********Variable Declarations **************************** DATA: gv_form_name TYPE rs38l_fnam, " Used to store the function module generated by Smartform gv_bin_filesize TY

  • Adjust numbers in an Illustrator document

    InDesign has this awsome script which lets you adjust numbers in a document. With just a few clicks you increase (or decrease) all numbers in a document by a certain amount. Is there anything like this available for Illustrator (CS6 for Mac/PC)?

  • Next and previous slide doesn't work

    Hey all, I'm working on a presentation in Captivate 3. I've added 2 buttons in the slides, 1 button to go to the next slide and the other jumps to the previous slide. But when I test the presentation, the slide keeps repeating itself. In other words,

  • HT201320 I want to use email from my own dot com, but it says my host isn't safe???

    How do I get them approved or verified or whatever... Web host is bluehost.com