Transport rule doesn't work (trying to prepend a subject when mail comes to a second domain).

This is an SBS2011 and accepts mail for two mail domains (successfully), but I am trying to phase out one of the two domains.
I cannot find a better way to do it, but I have simply created this rule:
priority 0
when a recipient's address contains '@<olddomain>.gr'
prepend message subject with '[GR!] '
It doesn't do anything.
It's not a matter of restarting services or waiting for some kind of replication. This rule is created (and is enabled yes) more than a month.
Any ideas?
EDIT: In Message Tracker, I find a test message has the following entry just after receiving from remote mail server:
"The e-mail address for recipient "<myself>@<olddomain>.gr" was updated to the e-mail address "<myself>@M<newdomain>.com". The message is in the process of being delivered.
...then I have the successful delivery, without transport rule kicking in.
So is the problem related to the recipient having BOTH email addresses set? Then why system replaces the old with the default? Probably this is why the rule doesn't kick (as it doesn't match any more).
Is there a way to prevent this replacement, since I want the recipients to still get reached by the mail?
NLS

Hi NLS,
I would like to verify if you apply the rule for your primary email address.
You can try to use the following cmdlet to achieve your goal.
New-TransportRule -Name 'New Rule' -Comments 'Comment' -HeaderContainsMessageHeader 'Received' -HeaderContainsWords 'olddomain.com'-FromAddressContainsWords
'[email protected]' -PrependSubject "OLDDOMAIN"
Hope it helps.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Similar Messages

  • Hi! I bought my iPhone from USA and the power button doesn't work. I have warranty. I will come to UK soon. I wanna learn; can i benefit my warranty in UK?

    Hi! I bought my iPhone from USA and the power button doesn't work. I have warranty. I will come to UK soon. I wanna learn; can i benefit my warranty in UK?

    The warranty is not and has never been International.  Warranty and support are only valid in the country of origin.  The only exception is for devices sold in the EU where the EU is treated as one country for warranty and support purposes.

  • In my wife's window, the sound works, when I switch over to my window the sound doesn't work.  I noticed the problem when I went to a YouTube video.  How do I correct this?

    In my wife's window, the sound works, when I switch over to my window the sound doesn't work.  I noticed the problem when I went to a YouTube video.  How do I correct this?

    Hello Kiira Doon,
    The troubleshooting steps detailed below may help get your iPhone's display to function.
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    My issue is still not resolved. What do I do next?Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • TS4079 I have an iphone 5 and my Siri doesn't work at the moment. But when I restart my phone it works but 5 minutes later it doesn't work again!!! What should I do???

    I have an iphone 5 and my Siri doesn't work at the moment. But when I restart my phone it works but 5 minutes later it doesn't work again!!! What should I do???

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Since Lion installation the remote control first generation, doesn't work as usually. On Leopard when I pushed the menu button, it opened a menu that showed music, films, photo. Now it doesn't work anymore. Is there anyone to explain me why this happen?

    Since Lion installation the remote control first generation, doesn't work as usually. On Leopard when I pushed the menu button, it opened a menu that showed music, films, photo. Now it doesn't work anymore. Is there anyone to explain me why this happen? Thank you.

    Sadly Snow Leopard was the last OS X to have Front Row and it is no longer offered in Lion or Mountain.
    see > Farewell Front Row | Macworld
    If you want, you can get it back with some tweaking.
    see > Get Front Row for Mac OS X 10.7 Lion
    or > Use Front Row In OS X Lion
    Also note: that your remote should still be working for waking the Mac, volume control and iTunes...? If it is not, let us know for help with it.

  • EMET 5.0 Pinning Rule doesn´t work

    I have installed EMET 5.0 on my Windows 7 pro system. I have configured a pinning rule for my internetbank exactly the same way as i did with EMET 4.1. But when I apply a different certificate
    from my bank's to test the rule nothing happens - no warnings when I log in to the internetbank. Except once!. With EMET 4.1 the warnings never failed to show.
    The new EMET 5.0 blocking function doesn't work at all (which is very disappointing, as this was the main reason why I upgraded to EMET 5.0).
    Anyone who knows how to do to make this work?
    I tried to enclose screenshots of my current configuration, but got the error message:
    "Body text cannot contain images or links until we are able to verify your account."
    But i don't understand how to verify my account...sorry...

    This morning I:
    1. Logged in as administrator on Windows 8 (Swedish version).
    2. Installed and configured EMET 5.0 with recommended settings and added pinning/blocking rule for my internetbank. Imported certificate different from that used by my internetbank.
    3. Logged out.
    4. Logged in as standard user.
    5. Launched Internet Explorer in desktop mode (didn't run as administrator).
    6. Tried to log in to my internetbank – pinning rule blocked login, nice!.
    As you stated before, pinning rule does not work as one would like on Windows 7 (I have windows 7 professional English version).
    Have not yet tried to use EMET logged in as administrator on Windows 7 but why bother? I agree with you, not a good idea to log in as administrator and then use internet…
    I will use Windows 8 for my internet banking until this is resolved.
    Thank you!

  • Mail Rule Doesn't Work

    I participate at some message boards. I recently upgraded my yahoo email account so I could POP my mail using Mac Mail. Fine. So I tried to set up a rule to route emails from those boards into a mailbox in Mail I created called "Message Boards". Only it doesn't work. The messages go into the Inbox and not the boards mailbox. What did I do wrong? I set it so that anything from those incoming emails would be moved to that mailbox, but it's just not doing it.

    Try splitting it into two separate rules, one for each condition. Add an action after your colour action "stop applying rules"
    AK

  • Own udev rule doesn't work at all

    Hi,
    I've trouble to write my own udev rule. I tried the following but it doesn't work at all.
    I created the following file /etc/udev/rules.d/90-monitor-hotplug.rules with the following content:
    # test
    SUBSYSTEMS="usb", RUN+="/bin/sh -c '/bin/echo mon >> /tmp/monitor.log'"
    run
    > udevadm control --reload
    Now I assumed with every usb event, e.g plugin of an usb memory stick it should  spam something in /tmp/monitor.log
    But nothing happens.
    Can anybody tell me what I'm doing wrong. I guess it's something really stupid.
    Thanks
    Jakob

    You haven't used an equality operator in your first line (2x "="). Other than that, it looks fine to me.
    So try:
    # test
    SUBSYSTEMS=="usb", RUN+="/bin/sh -c '/bin/echo mon >> /tmp/monitor.log'"
    run
    > udevadm control --reload

  • ALE doesn't work - possiblity to notify anyone via e-mail...

    Hi,
    at times our system doesn't send IDoc's via ALE. I can see that in transaction SM58. If we have that problem, we identificate that problem to late (10 hours later).
    Is there a possibility to send a mail or notfication if the interface doesn't work?
    Thanks
    Michael

    Hey,
    Wait an hour. I received more than 40 times the activation email from Sony within 1 hour.
    It looked like this will not work but i verified my mail adress and I'm now online on PSN.
    Just wait 1 to 1,5 hour, you will receive the mail
    cya

  • My iphone 3g sound doesn't work but goes on and off when i'm using headset,

    my iphone 3g sound doesn't work but when i plug in headset, the headset sound goes on and off. I think the speaker has a problem or touches but why does the headset not work but goes off randomly?Pls help me out

    my iphone 3g sound doesn't work but when i plug in headset, the headset sound goes on and off. I think the speaker has a problem or touches but why does the headset not work but goes off randomly?Pls help me out

  • My keyboard doesn't work from the login screen, but when I login as a guest user it works fine (minus the brightness buttons, playback buttons, etc.).

    I've already switched out the batteries and the keyboard works fine, so I fear it might be some sort of bug? All the methods of restarting or resetting certain settings can only be done from the login screen or from within an account, when the keyboard doesn't work, and the guest options are limited to non existent.

    Try doing a SMC reset, you may need to do this 2-3 times as sometimes the reset doesn't always "take" the first time. To do a SMC reset, shut down the computer, unplug the power cord from the wall and computer, wait 15-20 seconds and restart normally and test. If after 2-3 resets it still does not work test another keyboard. If that keyboard works then this indicates your keyboard has failed and needs to be replaced.

  • ACS 'Password Change Rule' doesn't work with telnet

    Hello:
    I am trying to configure that users have to change their passwords when they enter to a network appliance the first time they log in.
    I have an ACS 4.0 appliance, the option "Disable TELNET Change Password against this ACS and return the following message to the users telnet session" is disable. When I try to enter to a Catalyst 6500, for instance, I type user and pass and I get Rejected (RADIUS is the protocol used).
    In the ACS' reports I can see it appears the next error 'Authen Failed - CS Password Expired'.
    I only have enabled the option "Apply password change rule" in Group Settings, the others options for "Password Aging Rules" are deactivated.
    Thanks for your help,
    Francisco

    You'll need to be using TACACS+ to get password change to work.
    Doesnt work with RADIUS.

  • Workflow rules doesn't work for existing record!!?!?!?

    Hi all,
    I've created one workflow rule to update value from one filed to another. Here is my expression:
    [<QuickSearch1>] <> [<plStatus_ITAG>]
    and my action is
    field name = "*Status" (QuickSearch1)
    Value = <plStatus_ITAG>
    and I tick on the Overwrite the existing value
    This is work for new record, but for the existing one the field value doesn't chnage. Any suggestion??
    Thanks
    Note

    The syntax should be: PRE('< QuickSearch1>') <> [<QuickSearch1>] for the condition.

  • Upgraded to 8.0.1-send link in gmail doesn't work-Tried all send link ways

    Vista 32 bit-Windows 7-Just upgraded to firefox 8.0.1 from 3.6 -Tried to send web page in Gmail link from File and Share and right clicking on Share Using Gmail. My Speed Dial page keeps coming up instead of Gmail. In addition, on top of Speed Dial page G Mail Manager log in box appears that says"Enter Account Info To Log In" but email and password are already there.
    Upgraded because old version kept freezing. This one is horrible and not user friendly at all. I will be grateful for ANY help. Would like to uninstall and go back to old version but do not know how. Thank you.

    I just got my emails again, not sure what did the magic, but this is what I did:
    - Downloaded my enterprise certificates (device provisioining) - Maybe you don't have to do this step.
    - Reset the iPAD (press power button and menu button until you see apple logo -> this doesn't erase data on the iPAD)
    - Deleted the exchange account
    - Created the exchange account - at this time the iPAD could confirm credentials
    After a couple of minutes emails started coming again!
    Btw, I had this issue after upgrading to iOS 8.1.1.

  • The tab button is not operating, it is visually there, just doesn't work. tried rebooting and help but cannot solve the problem. also tried control+T and nothing works, reset to default and still doesn't work.

    Tab button is not operating. Tried rebooting, resetting options to default, tried with mouse and with control+T and nothing seems to activate it. It was working properly until an hour ago. Now the + (tab) button is there but it is idle. How do I fix this issue?

    This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
    Your system details show that toolbar in the user agent as AskTbFWV5/3.12.2.16749
    See:
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for

  • Unable to load XDB library

    Hi, i have just created a new database but i keep getting the following error ORA-00600: internal error code, arguments: [unable to load XDB library], initializing SGA: sga_pass1Dynamic link error: Could not load module /u03/app/or acle/product/10.2.

  • Floating Point Error

    Hi all! Does anybody understands the following Error Message or does anybody had it allready? I <u>tried</u> to write a little 3D-Engine just for fun, but the kvm doesn�t wantme to. Please help. ERROR: floating-point constants should not appear Error

  • At runtime - populate Adobe from textfield in view

    Hi, friends, I have created a very simple WDA application. WDA has 3 elements in the view: - InputField FLD1 - button "Submit" - PDF form of type ZCI with XML based Interface. The PDF form has a text field TF1 bind to FLD1. At runtime On click button

  • Save data from a bounded matrix

    Hi! I have a matrix bounded to a UDO table. This matrix is filtered by a Condition object. Which is the best way to update records to the database? Best regards, Jose

  • PSCC Layers not showing.

    PS CC not showing Layers/History/Color, etc.   Also images open in bottom right hand corner of the window.   Also Essentials not showing on top bar.   Tried uninstalling and reinstalling PS CC, but problem still exists.