Transport session to device failed. Cause: Authentication failed on device

Hi,
I am new to LMS, i add manually new devices cisco 4500 switch all of them give me the following error
Transport session to device failed. Cause: Authentication failed on device
i tried to change the snmp credentials to devices still the same.
i need to know the following:
Is this related to user ciscow that i configure on switch ?
Is this related to snmp credentials configured on switch and lms ?
Auto discover is enabled i have configured it from
common services -----> Device and Credentials ------->  Device Discovery
why it is not configuring new devices ?
and i need one more thing plz tell me the process of adding new device from start to end
what should i configure on router or switch ?
what should i do on lms so that this device can be viewable to lms ?
thankssssssssssssssssssssssssssssssssssssssss

Any Reply ?????????????????????????????

Similar Messages

  • "invalid password "on Iweb Test. and on SEO Tool, Login Failed Login Authentication Failed, ALL SETTING ARE CORRECT HELP

    I have been updating my site over the last week, using Iweb SEO TOOL, but suddenly 2 days ago I can no longer update when i go to publish it says "invalid password "on Iweb Test. and on SEO Tool, Login Failed Login Authentication Failed, the password and all settings are correct.
    I am 100% sure the all the setting are correct, as it has been working for the last 7 months and I have just been updating it, then suddenly it stopped, I have all the FTP settings wrote down, and even changed the passwords twice hoping that may work to no avail.

    Try the following:
    delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
    go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
    Click to view full size
    launch iWeb and try again.
    If that doesn't help continue with:
    move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
    launch iWeb, create a new test site, save the new domain file and close iWeb.
    go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
    move your original domain file from the Desktop to the iWeb folder.
    launch iWeb and try again.

  • Auto-login of hotspot cause authentication failed

        My iphone will auto-login to oauth page such as weibo(see below file) when I connect to a hotspot.
    But when I click "login" button after input right user information, it'll pop up a new page using safari and
    then authentication failed (my wifi signal will disconnect at that time). It will successfully pass authentication
    only when authentication process is inside auto-login page and not pup up a new page using safari.
    My issue is how to avoid the procedure that pop up a new page using safari.
        Sincerely hope your reply. Thanks a lot.

    Any Reply ?????????????????????????????

  • Review upload fails cause connect fails

    While I can log in my account on acrobat.com with IE, PS and InDesign (CS5 30 day trial / german) can´t connect with same name and password. Any idea about this.

    Hi c44sman,
    Leaving PSE out of the picture, temporarily, do your devices show up in Windows Explorer and can you copy images from them to a folder on your computer's drive?
    First you want to disable the Photo Downloader. To disable the downloader, find the little camera icon on the bottom right hand side of the Windows taskbar, right click on it, and you should be given the option to disable it.
    Next, click on "Start" on Windows task bar, open the "All programs" list, find "Scanner and Camera Wizard" in "Accessories." This program - Scanner and Camera Wizard - will be the default program you use to download photos from iphone to computer. Every time you connect your iphone with your computer, you should be given a dialogue window where you can pick the "Scanner and Camera Wizard" program to download the photos. Once selected, the program will take you through a step-by-step wizard to download the photos. Within the process of downloading, you can select folders or create a new folder for the photos. In my opinion, making a new folder makes it easier to import them altogether into photoshop organizer where I usually do the "Smart Fix" for all the photos.
    Once you have the photos downloaded, open up Photoshop's organizer interface, go to "files," and then "Get photos and videos." Here you will select "from files and folders." Locate the folder where the photos are stored, and then import them directly into Photoshop. Now, you should be at where you usually land if the photo downloader was working properly.
    Also do check if you have updated the software to te latest patch.Go to the Editor menu and click:
    Help >> About Plug-in >> Camera Raw
    You should see a pop up with the version number.
    Press Esc to close.
    Help >> Check for updates
    to install the latest patch.

  • TS4002 Can you tell me if the smtp settings have changed recently?  I use me/ICloud mail with Outlook and can not receive emails but outgoing emails are no longer working.  Error message is: Authentication failed because Outlook doesn't support any of the

    I am able to receive messages on my IMac using Outlook but am unable to send.  I've had no trouble in the past but began receiving the following messages today.
    5.7.8 Bad username or password (Authentication failed).
    Authentication failed because Outlook doesn't support any of the available authentication methods.
    I am able to send messages using this account on my IPhone and IPad so the IMac is the only place I am having issues.  Any advice?

    Here are the correct settings. They have never changed since iCloud debuted a year ago.
    Server information
    IMAP (Incoming Mail Server) information:
    Server name: imap.mail.me.com
    SSL Required: Yes
    Port: 993
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    SMTP (outgoing mail server) information:
    Server name: smtp.mail.me.com
    SSL Required: Yes
    Port: 587
    SMTP Authentication Required: Yes
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    Note: If you receive errors using SSL, try using TLS instead. SSL is required for both IMAP and SMTP connection with iCloud. POP is not supported by iCloud. 

  • "Authentication failed" - exceeding Airport Extreme's max users with less than 10 devices connected?

    I am running an Airport Extreme with two Airport Expresses on my network.  There are two macbook pros, two iphones, two ipads, a PS3 and a chromecast in the household, a max of probably 5 or 6 of which are turned on at any given time.  Normally everything works perfectly, but occasionally my wife or I will get an "authentication failed" message while trying to log onto our home network, and after wasting time resetting the router, checking settings, etc, the only sure fire way to reconnect seems to be to make sure the chromecast and a couple of the iphones are turned off. 
    If I remember correctly, the max number of connections to an airport extreme is 50?  Obviously not ideal but it shouldn't be refusing connections when 6 or 7 devices are trying to hook up.  We have had the same issue when firends come to visit.  I can't find any obvious problems in the airport setup, and I have my DHCP range set from xx.xx.xx.2 to 200. 
    Any ideas?

    is it the same device generating the error
    i have had up to 40 devices on a single extreme maybe with 10 actively working others when needed with no issue

  • Authentication failed on device 3 times. Failed to detect SSH version running on the device. PRIMARY-STARTUP config Fetch Operation failed for TFTP

    I have devices loaded but new devices keep getting this error "Authentication failed on device 3 times. Failed to detect SSH version running on the device. PRIMARY-STARTUP config Fetch Operation failed for TFTP" - which trying to get configurations. I am using LMS 3.0.1
    I tried to TELNET on devices via Putty port 22 no good. Please help?
    Name Version License Status Size CiscoWorks  Common Services 3.1.1 Licensed Not applicable  Campus  Manager 5.0.3 Purchased 1500  CiscoView 6.1.7 Licensed Not applicable  CiscoWorks  Assistant 1.0.1 Licensed Not applicable  Device  Fault Manager 3.0.3 Purchased 1500  Internetwork  Performance Monitor 4.0.1 Purchased 1500  Integration  Utility 1.7.1 Licensed Not applicable  LMS  Portal 1.0.1 Licensed Not applicable  Resource  Manager Essentials 4.1.1 Purchased 1500

    Showing 1-1 of 1 records
    Go to page:
    of 1 pages
    Device Name
    SysObjectID
    Model
    Device Status
    Inventory Status
    Inventory Last Updated Time
    Config Status
    Config Last Updated Time
    1.
    R2020012_01
    .1.3.6.1.4.1.9.1.576
    Cisco 2811 Integrated Services Router
    Normal
    Success
    Jan 13 2011 10:43:49 EST
    Failed
    Jan 13 2011 10:37:24 EST
      Rows per page:
    20 50 100 500
    Go to page:
    of 1 pages

  • "Authentication Failed" and "Your session has timed out" messages

    Hi All,
    In our implementation, we are using Sun Access Manager 7.0 Patch 6. We noticed that sometimes when we enter invalid credentials, we receive "Authentication Failed" message which we understand is a correct behavior. But sometimes instead of "Authentication Failed", we get "Your session has timed out" message even though we did not go over the module timeout of 2 minutes(i.e. default timeout value in SUN Access Manager).
    Is this a known anomaly? Did anybody else have seen this kind of behavior?
    Thanks,
    Jaya

    I'm having issues too! Help!

  • Eap tls authentication fails if bluetooth device connected

    Hi All, I'm new to Macs but was tasked with getting a MacBook Air connected to our AD integrated, 802.1x wifi network. After a lot of trial and error with certificates I finally got this working but now have a rather bizarre problem. With the MBA on it's own it will connect to the wifi network, sucessfully authenticate and work perfectly well. However, if my Apple bluetooth mouse or keyboard are connected to the MBA the EAP-TLS authentication fails. A packet capture of the connection process shows that at the same point every time the process take a while then a packet shows as "Unknown Error Ignored", then loops thorugh the process. Turning off the keybpard and mouse at this point and the MBA will connect. Once connected I can then connect the keyboard and mouse and continue to stay connected for a while before, I assume, the AP forces a re-auth and the connection drops again.
    Has anyone come across this elsewhere?
    Thanks

    I have a Macbook Pro Retina 15" from 2012 and it has the same issue. Running 10.8.4. I have spent probably 5-6 hours trying to troubleshoot cert's network settings, did a complete fresh install (then restored from timemachine when that did not work) with no luck this solution worked but obviously is not a real solution as it should not confilct in this way. Great job on finding a workaround! I will be contacting apple about this ASAP under my applecare.

  • OSB: SFTP transport Authentication Failed

    I am not able upload file to sftp. known_hosts file is set and configured correctly. Service account is static and ok.
    Result: The invocation resulted in an error: Authentication Failed.
    Sshd: Remote sftp server: SSH-1.99-OpenSSH_3.8p1
    Osb-Client: SSH-2.0-http://www.sshtools.com J2SSH [CLIENT]

    Either you have provided incorrect password or SFTP server is configured with certificate authentication. Cross check.
    Regards,
    Anuj

  • Discussion Server Authentication Failed From Inside FMW App

    Hi Community,
    My Env:
    Webcenter 11.1.1.3.0
    Weblogic 10.3.3
    The discussion server shipped with webcenter suite is Jive Forums Silver 5.5.20 .2-oracle.
    I wired the discussion server to embedded LDAP server of my weblogic server, and deployed an app that utilize the discussion service.
    But when accessing the app page, I got an exception "failure to authenticate the user pbrown, due to: Authentication Failed".
    The users do exist in LDAP server and I can login to http://server:8890/owc_discussions page with that users, I also granted all privileges to the users in jive console, but it doesn't work inside the app.
    My Jive server log:
    [2010-09-05T23:21:22.816-07:00] [WLS_Services] [ERROR] [] [org.codehaus.xfire.handler.DefaultFaultHandler] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000If_hC7s5e_Vau1q2UH1CWBaI0000E_,0] [APP: owc_discussions#11.1.1.2.0] [dcid: bafcaeab2cd82008:-b3c6f44:12ad6d55fae:-8000-00000000000003c6] Fault occurred![[
    com.jivesoftware.base.UnauthorizedException: Authentication Failed
    at com.jivesoftware.forum.webservices.server.xfire.PermissionHandler.acquireAuthToken(PermissionHandler.java:194)
    at com.jivesoftware.forum.webservices.server.xfire.PermissionHandler.invoke(PermissionHandler.java:98)
    at org.codehaus.xfire.handler.HandlerPipeline.invoke(HandlerPipeline.java:131)
    at org.codehaus.xfire.transport.DefaultEndpoint.onReceive(DefaultEndpoint.java:64)
    at org.codehaus.xfire.transport.AbstractChannel.receive(AbstractChannel.java:39)
    at org.codehaus.xfire.transport.http.XFireServletController.invoke(XFireServletController.java:287)
    at org.codehaus.xfire.transport.http.XFireServletController.doService(XFireServletController.java:130)
    at org.codehaus.xfire.transport.http.XFireServlet.doPost(XFireServlet.java:117)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at com.opensymphony.webwork.dispatcher.FilterDispatcher.doFilter(FilterDispatcher.java:189)
    at com.jivesoftware.base.action.util.JiveFilterDispatcher.doFilter(JiveFilterDispatcher.java:69)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at com.jivesoftware.base.util.webwork.JiveActionContextCleanUp.doFilter(JiveActionContextCleanUp.java:38)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Log of the server that hosts the app:
    [2010-09-05T23:21:08.184-07:00] [AdminServer] [WARNING] [] [oracle.adf.controller.internal.metadata.MetadataService] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000If_h8YC5e_Vau1q2UH1CWBIO0001Nc,0] [APP: StoreFrontModule#V2.0] [dcid: bafcaeab2cd82008:3873773a:12ad6c38b8a:-8000-0000000000001665] ADFc: /WEB-INF/adfc-config.xml:
    [2010-09-05T23:21:08.185-07:00] [AdminServer] [WARNING] [ADFC-52024] [oracle.adf.controller.internal.metadata.MetadataService] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000If_h8YC5e_Vau1q2UH1CWBIO0001Nc,0] [APP: StoreFrontModule#V2.0] [dcid: bafcaeab2cd82008:3873773a:12ad6c38b8a:-8000-0000000000001665] [arg: shoppingCartBean] ADFc: Duplicate managed bean definition for 'shoppingCartBean' detected.
    [2010-09-05T23:21:08.190-07:00] [AdminServer] [ERROR] [] [org.apache.myfaces.trinidadinternal.application.StateManagerImpl] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000If_h8YC5e_Vau1q2UH1CWBIO0001Nc,0] [APP: StoreFrontModule#V2.0] [dcid: bafcaeab2cd82008:3873773a:12ad6c38b8a:-8000-0000000000001665] Could not find saved view state for token uutg3hslp
    [2010-09-05T23:21:11.851-07:00] [AdminServer] [WARNING] [] [oracle.adfinternal.view.faces.renderkit.rich.NavigationPaneRenderer] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000If_h9SE5e_Vau1q2UH1CWBIO0001Ni,0] [APP: StoreFrontModule#V2.0] [dcid: bafcaeab2cd82008:3873773a:12ad6c38b8a:-8000-000000000000166f] Warning: There are no items to render for this level
    [2010-09-05T23:21:22.821-07:00] [AdminServer] [WARNING] [WCS-04013] [oracle.webcenter.collab.forum.internal.view.backing] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: pbrown] [ecid: 0000If_hC765e_Vau1q2UH1CWBIO0001Nm,0] [APP: StoreFrontModule#V2.0] [dcid: bafcaeab2cd82008:3873773a:12ad6c38b8a:-8000-0000000000001673] [arg: pbrown] [arg: Authentication Failed] failure to authenticate the user pbrown, due to: Authentication Failed[[
    oracle.webcenter.collab.share.LoginFailedException: failure to authenticate the user pbrown, due to: Authentication Failed
    at oracle.webcenter.collab.forum.internal.jive.JiveAuthenticator.handleException(JiveAuthenticator.java:304)
    at oracle.webcenter.collab.forum.internal.jive.JiveAuthenticator.login(JiveAuthenticator.java:247)
    at oracle.webcenter.collab.forum.internal.jive.JiveForumSession.login(JiveForumSession.java:128)
    at oracle.webcenter.collab.share.Session$1.call(Session.java:353)
    at oracle.webcenter.collab.share.Session$1.call(Session.java:347)
    at oracle.webcenter.concurrent.Submission$2.run(Submission.java:406)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
    at oracle.webcenter.concurrent.Submission.runAsPrivileged(Submission.java:420)
    at oracle.webcenter.concurrent.Submission.run(Submission.java:347)
    at oracle.webcenter.concurrent.Submission$SubmissionFutureTask.run(Submission.java:737)
    at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:442)
    at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
    at java.util.concurrent.FutureTask.run(FutureTask.java:139)
    at oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$Worker.runTask(ModifiedThreadPoolExecutor.java:657)
    at oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$Worker.run(ModifiedThreadPoolExecutor.java:683)
    at java.lang.Thread.run(Thread.java:619)
    Caused by: Authentication Failed
    Thanks,
    Todd

    I have same problem here. used weblogic admin but still doesnt works. Thats amazing or not?
    oracle.webcenter.collab.share.LoginFailedException: failure to authenticate the user Weblogic, due to: Authentication Failed
    Edited by: José Carlos on 06/09/2010 06:56

  • 802.1x authentication fail

    i have a juniper device linux operating system on that we have radius server configured and i am trying to integrate my WLC with that radius
    i have added WLC as a host there in radius
    on wlc i have configured authentication like radius ip shared secret key and done
    its working i can ping radius server
    also in wlc i configured on Wlan aaa allow override check box and also hited the WPA2 802.1x layer2 security and radius server option brought on top.
    i also configured my windows wireless adaptor as PEAP MSCHAP v2
    i am trying to connect this ssid and its asking for my AD accounts but when i enter that its not authenticating users and giving this logs.
    (WiSM-slot24-1) >debug aaa events enable
    (WiSM-slot24-1) >
    (WiSM-slot24-1) >
    (WiSM-slot24-1) >*apfMsConnTask_0: Dec 31 15:12:03.043: 00:13:e8:3e:26:bf Processing RSN IE type 48, length 22 for mobile 00:13:e8:3e:26:bf
    *apfMsConnTask_0: Dec 31 15:12:03.043: 00:13:e8:3e:26:bf Received RSN IE with 0 PMKIDs from mobile 00:13:e8:3e:26:bf
    *apfMsConnTask_0: Dec 31 15:12:03.043: 00:13:e8:3e:26:bf apfMsAssoStateInc
    *dot1xMsgTask: Dec 31 15:12:03.044: 00:13:e8:3e:26:bf Station 00:13:e8:3e:26:bf setting dot1x reauth timeout = 1800
    *dot1xMsgTask: Dec 31 15:12:03.044: 00:13:e8:3e:26:bf Sending EAP-Request/Identity to mobile 00:13:e8:3e:26:bf (EAP Id 1)
    *Dot1x_NW_MsgTask_0: Dec 31 15:12:03.097: 00:13:e8:3e:26:bf Received EAPOL START from mobile 00:13:e8:3e:26:bf
    *Dot1x_NW_MsgTask_0: Dec 31 15:12:03.097: 00:13:e8:3e:26:bf Sending EAP-Request/Identity to mobile 00:13:e8:3e:26:bf (EAP Id 2)
    *Dot1x_NW_MsgTask_0: Dec 31 15:12:12.596: 00:13:e8:3e:26:bf Received EAPOL EAPPKT from mobile 00:13:e8:3e:26:bf
    *Dot1x_NW_MsgTask_0: Dec 31 15:12:12.596: 00:13:e8:3e:26:bf Received Identity Response (count=2) from mobile 00:13:e8:3e:26:bf
    *Dot1x_NW_MsgTask_0: Dec 31 15:12:12.596: 00:13:e8:3e:26:bf Audit Session ID added to the mscb: 0a8740e10000002e4efefc1c
    *Dot1x_NW_MsgTask_0: Dec 31 15:12:12.596: Creating audit session ID (dot1x_aaa_eapresp_supp) and Radius Request
    *aaaQueueReader: Dec 31 15:12:12.597: apfVapRadiusInfoGet: WLAN(1) dynamic int attributes srcAddr:0x0, gw:0x0, mask:0x0, vlan:0, dpPort:0, srcPort:0
    *aaaQueueReader: Dec 31 15:12:12.597: 00:13:e8:3e:26:bf Successful transmission of Authentication Packet (id 202) to 10.34.11.2:1812, proxy state 00:13:e8:3e:26:bf-00:00
    *radiusTransportThread: Dec 31 15:12:12.598: ****Enter processIncomingMessages: response code=11
    *radiusTransportThread: Dec 31 15:12:12.598: ****Enter processRadiusResponse: response code=11
    *radiusTransportThread: Dec 31 15:12:12.598: 00:13:e8:3e:26:bf Access-Challenge received from RADIUS server 10.34.11.2 for mobile 00:13:e8:3e:26:bf receiveId = 3
    *Dot1x_NW_MsgTask_0: Dec 31 15:12:12.598: 00:13:e8:3e:26:bf Processing Access-Challenge for mobile 00:13:e8:3e:26:bf
    *Dot1x_NW_MsgTask_0: Dec 31 15:12:12.598: 00:13:e8:3e:26:bf Sending EAP Request from AAA to mobile 00:13:e8:3e:26:bf (EAP Id 3)
    *Dot1x_NW_MsgTask_0: Dec 31 15:12:12.600: 00:13:e8:3e:26:bf Received EAPOL EAPPKT from mobile 00:13:e8:3e:26:bf
    *Dot1x_NW_MsgTask_0: Dec 31 15:12:12.600: 00:13:e8:3e:26:bf Received EAP Response from mobile 00:13:e8:3e:26:bf (EAP Id 3, EAP Type 3)
    *aaaQueueReader: Dec 31 15:12:12.600: apfVapRadiusInfoGet: WLAN(1) dynamic int attributes srcAddr:0x0, gw:0x0, mask:0x0, vlan:0, dpPort:0, srcPort:0
    *aaaQueueReader: Dec 31 15:12:12.600: 00:13:e8:3e:26:bf Successful transmission of Authentication Packet (id 203) to 10.34.11.2:1812, proxy state 00:13:e8:3e:26:bf-00:00
    *radiusTransportThread: Dec 31 15:12:12.601: ****Enter processIncomingMessages: response code=3
    *radiusTransportThread: Dec 31 15:12:12.601: ****Enter processRadiusResponse: response code=3
    *radiusTransportThread: Dec 31 15:12:12.601: 00:13:e8:3e:26:bf Access-Reject received from RADIUS server 10.34.11.2 for mobile 00:13:e8:3e:26:bf receiveId = 3
    *radiusTransportThread: Dec 31 15:12:12.601: 00:13:e8:3e:26:bf [Error] Client requested no retries for mobile 00:13:E8:3E:26:BF
    *radiusTransportThread: Dec 31 15:12:12.601: 00:13:e8:3e:26:bf Returning AAA Error 'Authentication Failed' (-4) for mobile 00:13:e8:3e:26:bf
    *Dot1x_NW_MsgTask_0: Dec 31 15:12:12.601: 00:13:e8:3e:26:bf Processing Access-Reject for mobile 00:13:e8:3e:26:bf
    *Dot1x_NW_MsgTask_0: Dec 31 15:12:12.602: 00:13:e8:3e:26:bf Removing PMK cache due to EAP-Failure for mobile 00:13:e8:3e:26:bf (EAP Id 3)
    *Dot1x_NW_MsgTask_0: Dec 31 15:12:12.602: 00:13:e8:3e:26:bf Sending EAP-Failure to mobile 00:13:e8:3e:26:bf (EAP Id 3)
    *Dot1x_NW_MsgTask_0: Dec 31 15:12:12.602: 00:13:e8:3e:26:bf Setting quiet timer for 5 seconds for mobile 00:13:e8:3e:26:bf
    *apfMsConnTask_0: Dec 31 15:12:15.319: 00:13:e8:3e:26:bf Processing RSN IE type 48, length 22 for mobile 00:13:e8:3e:26:bf
    *apfMsConnTask_0: Dec 31 15:12:15.319: 00:13:e8:3e:26:bf Received RSN IE with 0 PMKIDs from mobile 00:13:e8:3e:26:bf
    *dot1xMsgTask: Dec 31 15:12:15.320: 00:13:e8:3e:26:bf Sending EAP-Request/Identity to mobile 00:13:e8:3e:26:bf (EAP Id 1)
    *Dot1x_NW_MsgTask_0: Dec 31 15:12:15.389: 00:13:e8:3e:26:bf Received EAPOL START from mobile 00:13:e8:3e:26:bf
    *Dot1x_NW_MsgTask_0: Dec 31 15:12:15.389: 00:13:e8:3e:26:bf Sending EAP-Request/Identity to mobile 00:13:e8:3e:26:bf (EAP Id 2)
    any idea to solve this problem?
    or any one knows that how to configur a radius server on juniper linux operating system?
    many thanks in advance

    You should post on the Juniper forums regarding your policy configuration.  You should stick with using a radius than just doing ldap through the wlc.  Here is a link for webauth using ldap, but should get you close.  Again... you should look at getting your juniper radius configuration fixed first.
    http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080a03e09.shtml

  • Authentication Failed Exception

    Hello every one,
    this is my second post to this problem, my problem is not solved yet. i tried lots of ways but not worked, please help me.
    i m trying to send a mail, it connects to the mail server but can't authenticate it, i cant uderstand where i m wrong.
    my code is
    try
    Properties props = new Properties();
    props.put("mail.smtp.host",smtpHost);
    props.put("mail.smtp.port",smtpPort);
    props.put("mail.smtp.auth","true");
    SMTPAuthenticator auth = new SMTPAuthenticator(user,pass);
    Session session = Session.getInstance(props,auth);
    session.setDebug(true);
    Message msg = new MimeMessage(session);
    msg.setSentDate(new Date());
    msg.setFrom(new InternetAddress(from));
    InternetAddress[] addTo = new InternetAddress[to.length];
    for(int i=0; i<to.length; i++)
    addTo[i] = new InternetAddress(to);
    msg.setRecipients(Message.RecipientType.TO, addTo);
    msg.setSubject(subject);
    msg.setHeader("Email Notification",from);
    MimeBodyPart messageBodyPart = new MimeBodyPart();
    messageBodyPart.setContent(content,"text/plain");
    Multipart multipart = new MimeMultipart();
    multipart.addBodyPart(messageBodyPart);
    if(attach != null && attach[0] != null)
    for(int i=0; i<attach.length; i++)
    messageBodyPart = new MimeBodyPart();
    DataSource source=null;
    source = new FileDataSource(attach[i]);
    messageBodyPart.setDataHandler(new DataHandler(source));
    messageBodyPart.setFileName(source.getName());
    multipart.addBodyPart(messageBodyPart);
    msg.setContent(multipart);
    Transport.send(msg);
    String host = "202.41.70.1";
    String port = "25";
    String usr = "sachin";
    String pwd = "xxxxx";
    String frm = "sachin";
    String[] to={"[email protected]","[email protected]","[email protected]"};
    String sub = "Email Notificatio through JavaMail";
    String con = "This is a test mail send through the Java Mail API";
    try
    send s = new send(host,port,usr,pwd,frm,to,sub,con,null);
    catch(Exception e)
    e.printStackTrace();
    }It is simple java program and it gives following trace
    DEBUG: setDebug: JavaMail version 1.4ea
    DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.s
    mtp.SMTPTransport,Sun Microsystems, Inc]
    DEBUG SMTP: useEhlo true, useAuth true
    DEBUG SMTP: useEhlo true, useAuth true
    DEBUG SMTP: trying to connect to host "202.41.70.1", port 25, isSSL false
    220 bioinfo.ernet.in ESMTP Sendmail 8.13.1/8.13.1; Thu, 9 Nov 2006 17:18:41 +053
    0
    DEBUG SMTP: connected to host "202.41.70.1", port: 25
    EHLO pc-56
    250-bioinfo.ernet.in Hello mm-pc56.bioinfo.ernet.in [202.41.70.56], pleased to m
    eet you
    250-ENHANCEDSTATUSCODES
    250-PIPELINING
    250-8BITMIME
    250-SIZE
    250-DSN
    250-AUTH DIGEST-MD5 CRAM-MD5
    250-DELIVERBY
    250 HELP
    DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
    DEBUG SMTP: Found extension "PIPELINING", arg ""
    DEBUG SMTP: Found extension "8BITMIME", arg ""
    DEBUG SMTP: Found extension "SIZE", arg ""
    DEBUG SMTP: Found extension "DSN", arg ""
    DEBUG SMTP: Found extension "AUTH", arg "DIGEST-MD5 CRAM-MD5"
    DEBUG SMTP: Found extension "DELIVERBY", arg ""
    DEBUG SMTP: Found extension "HELP", arg ""
    DEBUG SMTP: Attempt to authenticate
    DEBUG DIGEST-MD5: Loaded
    AUTH DIGEST-MD5
    334 bm9uY2U9IllMM2RRRzc0Q3YraWI5MkJ5QXdEOCt0QjI5elIvdFNzNmUweG9la1lqTGc9IixyZWFs
    bT0iYmlvaW5mby5lcm5ldC5pbiIscW9wPSJhdXRoLGF1dGgtaW50LGF1dGgtY29uZiIsY2lwaGVyPSJy
    YzQtNDAscmM0LTU2LHJjNCxkZXMsM2RlcyIsbWF4YnVmPTgxOTIsY2hhcnNldD11dGYtOCxhbGdvcml0
    aG09bWQ1LXNlc3M=
    DEBUG DIGEST-MD5: Begin authentication ...
    DEBUG DIGEST-MD5: Received => nonce='YL3dQG74Cv+ib92ByAwD8+tB29zR/tSs6e0xoekYjLg
    ='
    DEBUG DIGEST-MD5: Received => realm='bioinfo.ernet.in'
    DEBUG DIGEST-MD5: Received => qop='auth,auth-int,auth-conf'
    DEBUG DIGEST-MD5: Received => cipher='rc4-40,rc4-56,rc4,des,3des'
    DEBUG DIGEST-MD5: Received => maxbuf='8192'
    DEBUG DIGEST-MD5: Received => charset='utf-8'
    DEBUG DIGEST-MD5: Received => algorithm='md5-sess'
    DEBUG DIGEST-MD5: Response => username="sachin",realm="bioinfo.ernet.in",qop=aut
    h,nc=00000001,nonce="YL3dQG74Cv+ib92ByAwD8+tB29zR/tSs6e0xoekYjLg=",cnonce="9Ko++
    L4WPLiz9bb56ZKJDsZz+QBR+ByvZTsFMJPAThU=",digest-uri="smtp/202.41.70.1",response=
    fcc111db97f183ca954743c9f6dfef70
    dXNlcm5hbWU9InNhY2hpbiIscmVhbG09ImJpb2luZm8uZXJuZXQuaW4iLHFvcD1hdXRoLG5jPTAwMDAw
    MDAxLG5vbmNlPSJZTDNkUUc3NEN2K2liOTJCeUF3RDgrdEIyOXpSL3RTczZlMHhvZWtZakxnPSIsY25v
    bmNlPSI5S28rK0w0V1BMaXo5YmI1NlpLSkRzWnorUUJSK0J5dlpUc0ZNSlBBVGhVPSIsZGlnZXN0LXVy
    aT0ic210cC8yMDIuNDEuNzAuMSIscmVzcG9uc2U9ZmNjMTExZGI5N2YxODNjYTk1NDc0M2M5ZjZkZmVm
    NzA=
    535 5.7.0 authentication failed
    javax.mail.AuthenticationFailedException
    at javax.mail.Service.connect(Service.java:306)
    at javax.mail.Service.connect(Service.java:156)
    at javax.mail.Service.connect(Service.java:105)
    at javax.mail.Transport.send0(Transport.java:168)
    at javax.mail.Transport.send(Transport.java:98)
    at send.<init>(send.java:67)
    at send.main(send.java:87)
    Hope any one will solve my problem, i am waiting for reply here tonight

    Hi .
    I tried your code , and I got the same exeption ..
    But when I changed a little bit in it , it worked ... :
    Properties props = new Properties();
    props.put("mail.smtp.host","host");
    props.put("mail.smtp.port","25");
    props.put("mail.smtp.auth","true");
    Session session = Session.getInstance(props,null);
    session.setDebug(true);
    Message msg = new MimeMessage(session);
    msg.setSentDate(new Date());
    msg.setFrom(new InternetAddress("[email protected]"));
    InternetAddress[] addTo = new InternetAddress[1];
    for(int i=0; i<addTo.length; i++)
    addTo[i] = new InternetAddress("[email protected]");
    msg.setRecipients(Message.RecipientType.TO, addTo);
    msg.setSubject("HIIIIIIIIIIIII");
    msg.setText("HIIIIIIIIIIII");
    Transport tr = session.getTransport("smtp");
    tr.connect("[email protected]","xxxx");
    tr.sendMessage(msg,msg.getAllRecipients());
    Actually I used : tr.sendMessage(msg,msg.getAllRecipients());
    instead of : tr.send(msg) and it worked for me ..
    Plase try it and let me know ..
    Omar Dawod .

  • Authentication failed while using the function from JSP.

    I am facing a issue with the mail functionality with JAVA Mailing.The problem is that when I am running the stand alone program it is working fine but when same function is called from a JSP it gives Authentication failed Exception.I am attaching the code with the case.testMail() Is the function called from the JSP.
    Please Look in to the issue its urgent.
    import javax.mail.*;
    import javax.mail.internet.*;
    import java.util.*;
    import java.io.*;
    import javax.activation.DataHandler;
    import javax.mail.MessagingException;
    import javax.mail.internet.MimeBodyPart;
    import javax.mail.internet.MimeMessage;
    import javax.mail.internet.MimeMultipart;
    import javax.mail.internet.MimePartDataSource;
    To use this program, change values for the following three constants,
    SMTP_HOST_NAME -- Has your SMTP Host Name
    SMTP_AUTH_USER -- Has your SMTP Authentication UserName
    SMTP_AUTH_PWD -- Has your SMTP Authentication Password
    Next change values for fields
    emailMsgTxt -- Message Text for the Email
    emailSubjectTxt -- Subject for email
    emailFromAddress -- Email Address whose name will appears as "from" address
    Next change value for "emailList".
    This String array has List of all Email Addresses to Email Email needs to be sent to.
    Next to run the program, execute it as follows,
    SendMailUsingAuthentication authProg = new SendMailUsingAuthentication();
    public class SendMailUsingAuthentication
    private static final String SMTP_HOST_NAME = "host";
    private static final String SMTP_AUTH_USER = "username";
    private static final String SMTP_AUTH_PWD = "password";
    private static final String emailMsgTxt = "Test Msg";
    private static final String emailSubjectTxt = "Notification: New User created";
    private static final String emailFromAddress = "[email protected]";
    // Add List of Email address to who email needs to be sent to
    private static final String[] emailList = {"[email protected]"};
    public static void main(String args[]) throws Exception
    SendMailUsingAuthentication smtpMailSender = new SendMailUsingAuthentication();
    smtpMailSender.postMail( emailList, emailSubjectTxt, emailMsgTxt, emailFromAddress);
    System.out.println("Sucessfully Sent mail to All Users");
    public void testMail(String msgBody,String senderEmail)throws MessagingException
    try{
         String mailBody = msgBody;
         String senderEmailAdd = senderEmail;
         SendMailUsingAuthentication smtpMailSender = new SendMailUsingAuthentication();
         smtpMailSender.postMail( emailList, emailSubjectTxt, mailBody , senderEmail);
         catch(MessagingException me) {
                   //System.out.println("Mail not sent");
                   throw me;
    public void postMail( String recipients[ ], String subject,
    String message , String from) throws MessagingException
    try{
         boolean debug = false;
    //Set the host smtp address
    Properties props = System.getProperties();
    props.put("mail.smtp.host", SMTP_HOST_NAME);
    props.put("mail.smtp.auth", "true");
    Authenticator auth = new SMTPAuthenticator();
    Session session = Session.getInstance(props, auth);
    session.setDebug(debug);
    // create a message
    Message msg = new MimeMessage(session);
    // set the from and to address
    InternetAddress addressFrom = new InternetAddress(from);
    msg.setFrom(addressFrom);
    InternetAddress[] addressTo = new InternetAddress[recipients.length];
    for (int i = 0; i < recipients.length; i++)
    addressTo[i] = new InternetAddress(recipients);
    msg.setRecipients(Message.RecipientType.TO, addressTo);
    // Setting the Subject and Content Type
    msg.setSubject(subject);
    msg.setContent(message, "text/plain");
    Transport.send(msg);
         catch(MessagingException me) {
                   //System.out.println("Mail not sent");
                   throw me;
    * SimpleAuthenticator is used to do simple authentication
    * when the SMTP server requires it.
    public static class SMTPAuthenticator extends javax.mail.Authenticator
    public PasswordAuthentication getPasswordAuthentication()
    String username = SMTP_AUTH_USER;
    String password = SMTP_AUTH_PWD;
              return new PasswordAuthentication(username, password);

    Your code doesn't work in stand alone program... just little mistake!
    Miss port property :
    props.put("mail.smtp.port", "25");
    props.put("mail.smtp.starttls.enable", "true"); // tls for gmail
    AddressTo method didn' t compile :
    InternetAddress[] addressTo = new InternetAddress[recipients.length];
    for (int i = 0; i < recipients.length; i++)
         addressTo[i] = new InternetAddress((String) recipients);
    msg.setRecipients(Message.RecipientType.TO, addressTo);
    And see this post for jsp integration :
    http://forum.java.sun.com/thread.jspa?threadID=5184860&tstart=0

  • Cisco ISE authentication failed because client reject certificate

    Hi Experts,
    I am a newbie in ISE and having problem in my first step in authentication. Please help.
    I am trying to deploy a standalone Cisco ISE 1.1.2 with WLC using 802.1x authentication. The user authentication configured to be checked to ISE's internal user database for early deployment. But when the user try to authenticate, they failed with error message in ISE :
    Authentication failed : 12321 PEAP failed SSL/TLS handshake because the client rejected the ISE local-certificate
    I've generate a certificate for ISE using Windows Server CA and replace ISE's self-signed certificate with the new certificate but authentication still failed with the same error message. Must I generate a certificate for WLC also? Please help me in solving this problem.
    Regards,
    Ratna

    Certificate-Based User Authentication via Supplicant Failing
    Symptoms or
    Issue
    User authentication is failing on the client machine, and the user is receiving a
    “RADIUS Access-Reject” form of message.
    Conditions (This issue occurs with authentication protocols that require certificate validation.)
    Possible Authentications report failure reasons:
    • “Authentication failed: 11514 Unexpectedly received empty TLS message;
    treating as a rejection by the client”
    • “Authentication failed: 12153 EAP-FAST failed SSL/TLS handshake because
    the client rejected the Cisco ISE local-certificate”
    Click the magnifying glass icon from Authentications to display the following output
    in the Authentication Report:
    • 12305 Prepared EAP-Request with another PEAP challenge
    • 11006 Returned RADIUS Access-Challenge
    • 11001 Received RADIUS Access-Request
    • 11018 RADIUS is reusing an existing session
    • 12304 Extracted EAP-Response containing PEAP challenge-response
    • 11514 Unexpectedly received empty TLS message; treating as a rejection by the
    client
    • 12512 Treat the unexpected TLS acknowledge message as a rejection from the
    client
    • 11504 Prepared EAP-Failure
    • 11003 Returned RADIUS Access-Reject
    • 11006 Returned RADIUS Access-Challenge
    • 11001 Received RADIUS Access-Request
    • 11018 RADIUS is re-using an existing session
    • 12104 Extracted EAP-Response containing EAP-FAST challenge-response
    • 12815 Extracted TLS Alert message
    • 12153 EAP-FAST failed SSL/TLS handshake because the client rejected the
    Cisco ISE local-certificate
    • 11504 Prepared EAP-Failure
    • 11003 Returned RADIUS Access-Reject
    Note This is an indication that the client does not have or does not trust the Cisco
    ISE certificates.
    Possible Causes The supplicant or client machine is not accepting the certificate from Cisco ISE.
    The client machine is configured to validate the server certificate, but is not
    configured to trust the Cisco ISE certificate.
    Resolution The client machine must accept the Cisco ISE certificate to enable authentication.

Maybe you are looking for

  • Web Apps FAQ

    Hello, I am working on knowledge base entries for developing Web Applications with Sun ONE Studio. I would be interested in whether any of the following are helpful. Also, are there other entries you think should be added? Other comments? Corrections

  • Stock in transit document

    Please tell me what type of documents will be created for stock in transit? When material is transfered from one plant to second plant stock in transit is used,I want to know what documents will be passed for issuing plant and receiving palnt? For ou

  • T61 nvidia quadro 140m memory failure

    This probably goes along the same lines as some of the other problems noted here with these video chipsets. A while ago, I tried upgrading the driver for my quadro 140m and it would hang on boot up. You would see the first vista loading screen and th

  • Mailbox Export Request using multiple content filters

    I've been reviewing the forums for help using the -ContentFilter switch for a mailbox export request but I can't seem to find a solution to my requirements. I'm looking for a way to use ContentFilter to export 90 days-worth of Inbox and Sent Items, b

  • Error when extending Active Directory schema

    Hi there, I am trying to extend my active directory schema in order to store my managed preferences in AD. I am following this white paper : http://images.apple.com/business/solutions/it/docs/Modifyingthe_Active_DirectorySchema.pdf When I try to appl