Transport system - develop-quality system

Hi,
we would like automate the transport from our change requests from develop-system to quality-system.
Does anyone know if there is a possibility where a user can release change requests without an automatically transport?
Can I define it in the transport route?
Thanks
Michael

HI
GOOD
go through this link, i hope this ll help you to solve your problem.
http://help.sap.com/saphelp_nw04/helpdata/en/90/972715cd8c11d2b41400609419f767/content.htm
thanks
mrutyun^

Similar Messages

  • Regarding query transport in BW quality system

    Hi Experts ,
    When I transport my query to BW quality system. It is showing error like "error activating element " .
    I searched in SCN and found that name for this technical element can be seen in RSZELTDIR table.
    I got technical name and it was query name itself. Again I transported only this element and it is giving same error.
    I am working in BW 7.4 and fresh implementation is going on .
    Is there anything which is missing while transport query in quality system .
    I have attached snapshot .
    Please help.
    Thanks
    Devesh Varshney

    Hi,
    Please try to check and follow below steps.
    1. Thru RSA1-->transport connection, collect your query and all elements(RKC,CKF,variables ..etc)
    2. Later check qll query elements are saved in custom package or &tmp. if its in $tmp then save package and store into custom package.
    3. collect objects into new Transport request.
    4. Check your transport request have any inconsistencies thru program - RSO_TLOGO_CHECK_REQUEST. Or
    5. later release and import to targets system.
    Even cross check query have any inconsistencies thru program - QUERY_CHECK.
    if you get error, please share error information in detailed.
    Thanks

  • How to create common file systems for both development & quality systems

    Hello Team
    Need some calrification & advise
    we are planning to install ECC6 with EHP5 on AIX7.1 with DB2 9.7 version on single physical server ( NO Virutal IP'S) for both development(SID : D10 & System number 20) & quality(SID : Q10 & System number 20) systems.And it will be running in single LPAR for development & quality systems.
    please advise me how can we create the below common file systems for both development & quality to avoid file permission & installation issues.
    /sapmnt/<SID>
    /usr/sap/
    /usr/sap/trans/
    /db2/IBM
    Thanks in advance & Regards
    BM

    Thanks you Juan for your response
    We are planning for seperate DB instance only.
    what could be the owner(UID) & group(GID) for the below file systems
    /sapmnt/
    usr/sap/
    usr/sap/trans
    Thanks in advance
    BM

  • Transport all Ques Tab strip in Development to production transport system

    By mistake, some one click TRANSPORT ALL QUES Tab strip in Development to production transport system. All objects in development went to production and it is changing the cubes. Is there is any chance to revertback  transportation.
    Its very Urgent. Can any one help me?
    Thanks in Advance

    hi
    Yes,you can reimport the same request back to your development,ask your basis people,they can do it..
    Hope it helps
    Thanks
    Teja

  • Can Attribute lists be transported from development to QA system?

    Hi,
    We want to test the attribute lists with some data, Can Attribute lists be transported from development to QA system?
    Regards
    Monica

    Hello Monica
    How are you doing?
    Can you help me out how i can transport the Attribute List which i have created in DEV with BI query. Hope you have resolved this by now. Could you help me out
    regards
    shankar

  • Transport layer SAP between development & quality

    Should we have to use two transport layers ( SAP& ZDEV(created )) between the development & quality system as their consolidate route  ?
    Transport layer
    SAP- Transport layer for SAP standard objects
    ZDEV- Transport layer between Devlopment & quality systems
    I assigned the consolidate route ZDEV between the Development & quality systems.Now ,How can I assign the transport layer SAP between the both systems as a consolidate route. Help me with your steps..

    HI,
    Z<SID> and SAP both are consolidation route as well as transport layer having different characteristic.
    ->A transport routes can be either a consolidation route or a delivery route. For a standard three-system
    landscape, the transport routes are as follows:
    -> A consolidation route connects the development system and the quality assurance system. This
    transport layer is named Z<SID>, where <SID> is the system ID of the development system.
    ->A delivery route is created between the quality assurance system and the production system.
    ->In the development system, if changes are made to objects whose development class refers to the
    (standard) transport layer corresponding to a consolidation route, these changes are recorded in
    requests and transported to the quality assurance system and then to the production system.
    If you change SAP objects, these changes are recorded in repairs, which can be transported in the
    same way but using the consolidation route "SAP".
    regards,
    kaushal

  • Hierarchy transport from developement to Quality?

    Dear SDN,
    Hierarchy transport from developement to Quality.
    I have created one balance sheet Hierarchy on 0Account infoobject.
    Could you please tell me how to transport hierarchy from development to Quality.
    Waiting for response.
    Thanks & Regards,
    Kiran

    Hi Kiran,
    Kiran Hierarchy data can be loade from source system, flat file or manually maintained in system.
    since you have done manulally you can do the same in other  systems also, but you need authrizations to maintain manually
    I have manually created my balance sheet hierarchy using RSH1 transaction code.
    you have do the same in quality also, since all required infoobjects are available in quality system, manulally create balance sheet hierarchy using RSH1 transaction code in Quality system.
    check whether you have authorization to manually create in Quality system. you have to do the same procedure in production also i guess.
    Regards
    Daya Sagar

  • Error with Transport system not configured that may be related to CHaRM

    Who has in depth knowledge on setting up SAP Solution Manager CHaRM. Had an odd problem with the transport system failing when the QA system was shut down for maintenance. Transports were not able to be created or save to.  Error message was Transport System not configured.  Brought up QA and re-distributed system and Transport group and transport requests started working again.

    Hello,
    if a system, e.g. QA system, will not be available due to a maintenance task,
    we set the status of this system to "temporarily inactive" (see header data in transaction SMSY).
    This status allows us, to create new transport requests in DEV-System although consolidation system QA is not available.
    (Of course you have to reset the status, when QA-system ist started again.)
    Hint: it is not possible to release or to import a transport request, when consolidation system is shut down.
    Therefore the developer should pay attention to the messages, which raise in urgent corrections.
    best regards
    Horst

  • Transport System

    Hi,
    I need help we are planning to upgrade our R3 to ECC 6.0 and our first step is to create a 4.6C Development system to support the 4.6C Production system.  We did a copy of our Production system and configure our transport system and now we cannot change Z programs we received this message "Carry out repairs in non-original system only if they are urgent".
    Thanks,

    Hi Ramon,
    local requests ALWAYS do not create datafiles ... they are designed for the "last system" in your landscape or for customers with a single system landscape only.
    Therefore, you should typically do not use a virtual system but include it to PRD. But, the virtual system is a nice workaround as well, because this creates then the datafiles and you can use "add to buffer" and import it in PRD - unfortunately you need to be careful with this technique, because you could forget transports ...
    as it is an emerngy stuff only, it should be ok.
    Regards
    Volker Gueldenpfennig, consolut.gmbh
    http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

  • No administration authorization in Change and Transport System in CHARM

    Hi guys,
    I am currently working for CHARM implementation for ECC 6.0
    now my problem i created an urgent correction  and i released the transport request successfully, but when i try to execute the Pass correction test action it is saying that No import into test system has taken place yet. then i went to task plan and checked there in quality system it is saying No administration authorization in Change and Transport System.
    So i asked my basis team to assign the S_TMW_IMPORT profile to user TSADM in 000 client of quality system and additinally our basis team has assigned S_CTS_ADMI. authorization object to TSADM user ID in 000 client of quality system. But SAP has suggested to assign S_CTS_IMPALL and S_CTS_IMPSGL authorization profile to S_CTS_ADMI.
    But the problem is S_CTS_IMPALL  and S_CTS_IMPSGL authorization profile is not available in 000 client of quality system.
    Kindly give your valuable inputs as early as possible. the solution provided by anybody will be rewarded with points.
    Thanks&Regards
    Raju

    can you try assigning the below profiles to that ID.
    S_TMW_OPERA     
    Operator in CTS (All Transport Authorizations)
    S_CTS_ALL     
    Transport system: All authorizations
    S_CTS_DEVELO     
    WBO: Profile for developers in P systems (incl. tasks)
    I too have checked and i did not come across the profiles nor objects S_CTS_IMPALL and S_CTS_IMPSGL .
    Where did u get the message that they have to be imported ?
    Hope it helps.
    Award points for the replies that are helpful to you.
    Rgds,
    Sri

  • Transport system: errors on import

    Hi,
    we have a report program with 35 includes as our developing guideline require an own include for each FORM routine.
    I made a couple of changes including the creation of new FORMs with new includes. Transport from develeopment to test without problems. After optimization I had finally 3 transports in Test system.
    They were imported with STMS together into production. This caused a generation error in one of the transports because an include was reported missing that was in one of the other transports.
    It was OK just to re-generate the program in productive system, now everything is fine. But additionally I had to update the navigation index and refresh the object tree in SE80 to see all objects.
    But a bitter taste remains: I expected the transport system to be aware of all objects in all transports imported together.
    Can you explain this behaviour and give any hints to vaoid this in the future.
    TIA and regards,
    Clemens Li

    Thank you Hans,
    so this means that transporting together and transporting in sequence is just the same?
    Meanwhile I saw that already my first transport to test system had the error reporting a missing form routine although the routine was included in one of the transported includes.
    Possibly a weakness in the system: The new Form has a similar name to an old existing form. The old name is 25 chars long, the new forms name is 29 chars long; old name + 4 chars suffix.
    This may have confused the system.
    Regards,
    Clemens

  • XI (java transport system)

    Guru's
    We have installed a XI system (2004s SR2) and now we have to install a java transport system system. Does anybody have some documentation how to setup a Java transport system and some tips and tricks
    cheers
    Richard

    Hi,
    Check out the following guides:
    Configuring the Change Management Service
    http://help.sap.com/saphelp_nw04s/helpdata/en/88/311041b59bef23e10000000a155106/frameset.htm
    CMS based Transport in XI
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
    How To Transport XI Content Using CMS
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
    Weblog: XI Software Logistics Solution III: CMS
    /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
    Also on NWDI
    Concepts of the Development Infrastructure
    http://help.sap.com/saphelp_nw70/helpdata/en/44/312b1a8bea3ec8e10000000a1553f6/frameset.htm
    SAP Network Blog: Configuration of CMS in Central NWDI & SLD to transport XI objects
    /people/praveen.mayalur/blog/2007/05/31/configuration-of-cms-in-central-nwdi-sld-to-transport-xi-objects
    Hope this helps
    Cheers
    Manish

  • Warning "Standard Transport System is Active"

    I have just installed the 710 GUI patch 11 and the 801 patch on the BI 7 tools.  When I run the Report Designer or Web Application Designer against our development BI system, I get the following warning:  "Standard Transport System is Active. SAP GUI connection is not activated for current connection to BI system. Do you want to reconnect to BI system and activate SAP GUI connection?" A connection dialog box appears and I put my credentials in and am connected. 
    Does anyone know why this warning appears on on certain systems and with certain tools?  For example, I do not receive this warning running these tools against our QA BI system.  How can I "fix" it so it no longer requires a second log in?  I thought it was in the config on the BI side but my BI guy says "no, it's a GUI issue".
    Thank you!
    Jodi

    Bex Pop up message - Standart transport system active - how to supress
    Regards.

  • Activating  the standard transport system in BI Dev system.

    Hello All,
                    We have a debate going on like whether we need to activate the standard transport system or not in BW Development.
    Our user is asking  to enable some functionality from a Web Template using the
    Save As command. This command enables a user to slice  a report and
    then save this view as a Portal Favorite. This functionality appears to be
    blocked when the transport system is active(Switched on) but  he is able to save it when transport system is switched off.
    I know that it has to be switched on in order to collect the changes in transport requests in Dev other wise will be collected as Local obects in $TMP. 
    Also let me know the pros and crons of activating the transport system.
    Appreciate if you could throw some light on this and solution to the above problem.
    Regards,
    Hari

    Hi,
    It's mentioned the activity of saving BI Query is carried out in Portal, so am assuming you might be using a BEx Web application for this.
    If yes, then would suggest you to try once after switching off the standard transport. And instead use BEx transports in Admin workbench.
    My understanding can be completely wrong, in which case request you to provide more details on the environment and the steps done.
    Thanks,
    Swapna Priya.

  • Best configuration for Transport System

    Hi everyone
    I like to know what is the best way to configure my transport system.
    We have 2 server QAS and PRD in two distinct machines. SERVERQAS and SERVERPRD, accessible from network.
    We need what when all transport request from QAS when released, all files must be copied to PRD server, today we need to use the button to adjust queue, but we can't use this option, we need what this process is automatic.
    Thks.

    Hello Emerson,
    You don't have Development system?
    In a standard 3 system landscape, if dev, qua and prod systems are assigned with single domain controller and sharing same /usr/sap/trans then as soon as request is released from dev system, that will be available in qua buffer/import queue. Once it's successfully imported into qua system then it will be available in prod buffer/import queue for import. This is controlled by transport route.
    Please read TMS configuration guide and take necessary actions.
    http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/content.htm
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/bcctstms/bcctstms.pdf
    Thanks,
    Siva Kumar

  • Change and transport system not configured

    hi
    Please anybody help me on this. I installed SAP IDES4.7 on Win Xp with Oracle9.2. It is working good except one error. when i click on anymenu item in GUI a popup says " change and transport system not configured'.
    How to fix this?
    i appreciate your help in advance. Thanks
    Madhu

    Hi
    After installing SAP IDES4.7 u have to do post-installation.As a postinstallation u have to configure the STMS(sap transport management system)
    STMS is mainlly used for moving objects from one system to other system
    Regards
    kiran kumar.v

Maybe you are looking for

  • Sudden MASSIVE battery drain on 3GS 4.0.1

    Never had any issues with battery on 4.0.1 until today. I took the phone off the charger just before 7 a.m. Central this morning. I did not have the phone hooked up to my car stereo on the way to work this morning since my car is in the shop and I'm

  • Premier Pro CS5 tears Android HTC G2 3gp Video

    My android HTC G2  HD video plays fine in Windows media player, windows vlc player and Mac OSX Quick time player. Primer Pro CS5 tears the video after import. Priemer reports the video as: Type: MPEG Movie File Size: 4.5 MB Image Size: 720 x 480 Pixe

  • What version of itunes will support windows 10?

    I have a PC with Windows 10 and cannot find a version of itunes that supports Windows 10.

  • Forall with nested table

    i have a procedure with a paremeter which is nested table of an object type. is it possible to use forall statement to insert into the table in the below case. can someone post the syntax in this case please. thanks. proc1( param1, in_items_arr is be

  • Installing UC Apps on VM

    HI Everyone I'm new to VMware and we are moving all of our applications off of our MCS servers to UCS servers. I've gotten the ESXi software installed on the server and I've installed the OVA's. Now I want to know what do I need to do to get the soft