Transportable and non transportable requests in the SRM EBP cusomizing

Hi friends,
can u please give the list of transportable and non transportable requests for the ebp configuration.
thank
Arun
Edited by: arun kumar on Aug 6, 2008 8:19 AM

wrong forum
Regards
Juan

Similar Messages

Diffrence between File Transport and CTS+ Transport in PI

Hi Guys,
Can you please explain me the diffrence between File Transport and CTS+ Transport in PI.
What are the advantages of CTS+ Transportation over FILE Transportation...
Thanks,
Siva...

The file transfer will simply export the objects to a TPZ file, allowing you to import on the target system. This requires manual copying and paste of the object and have no further control.
CTS+ on the other side, allows the environment to maintain transport requests with control over objects audit. For example, an object must be created on DEV, then after being developed it must go to QA system and will only be sent to PROD when this object was approved by the respective team on QA. For more information on CTS+, please check the help page below.
http://help.sap.com/saphelp_nwpi71/helpdata/en/9a/775de286874bc78dcb1470bc80f0f9/frameset.htm
Also the documentation below will provide a more complete overview and configuration steps for the CTS+ usage
"http://www.sdn.sap.com/irj/scn/go/portal/prtroot/com.sap.km.cm.docs/library/application-lifecycle-management/lifecycle-management/software-logistics/new%20features%20in%20sap%20enhancement%20package%201%20for%20sap%20netweaver%207.0.pdf"
Please also refer to the SDN thread below
How to move PI objects in IR and ID from DEV to QAS

I restored my iphone but now it will not power on fully. The Itunes plugin appears. I plug it in and restore as requested but the phone never restarts like it says it will. I have done this several times now but nothing. Suggestions?

I restored my iphone but now it will not power on fully. The Itunes plugin appears. I plug it in and restore as requested but the phone never restarts like it says it will. I have done this several times now but nothing. Suggestions?

Sounds like time to take it back to Apple for repair.
Allan

I have and Ipod touch, and new computer. How can i add all purchased and non purchased songs? The old computer with the original library is dead. HELP

I have an ipod touch 3rd generation and a new computer. How can i add all purchased and non purchased songs into the new computers itune library? The old computer is dead! Will not even turn on. Help!!!!!!!! I'm going crazy.

Look into downloading some type of iRip software! Allows you to transfer music from iPod to iTunes.

What is the difference between Bex transportation and Normal Transportation

Hi experts,
I have doubt with Transporting queries , in this I've used the normal transport (truck icon) rather than Bex Transport. I would like to know which is the preferable one and what is the main difference between them.
Suggest me if I can go for normal Transportation rather than Ibex transport, as I've not tried Bex transportation before.
Give me some valuable inputs please.......
Regards
Kumar

Hi Kumar,
We have a Bex transport because we may make changes in the query very often and these changes will be automatically taken care by Bex transports.
Generally this is how it goes.
You will capture the queries by creating a transport request and immediately you will create a Bex transport request and you have to assign the previously created transport request number to this Bex transport request, so that everytime you make changes to the query will be taken care by the Bex transport.
You can even create a Bex transport request individually.
Hope this tip may be useful.
Assign points if you find useful
Thanks
Regards
Sam Mathew

Transport and Post transport activities

Hello Experts,
We have activated a standard business content cube and loaded data in the DEV system, during the activation process and development of the infocube I had created a transport request and assigned all the repairs to it. Now this request contains couple of Info Objects under it.
After the complete installation of other objects like update rules, queries, infosources now we want to transport all of them to PRD.
So can I delete the previous transports request with repair and create a completely new transport request using the transport tool, collect all objects before and after in the infocube and send it to PRD ? would it be safe and deliver a consistent structure in PRD ? Also please suggest activities I need to carry out after transport and anything else that I need to check or keep in mind before creating a transport request.
Thanks
Sonu

Hi Shabar,
Thank you for the information, most of the infoObjects that are needed for the infoCube are already existing in the PRD and those which do not are collected for transport in the transport tool. And with the option before and after all the query, update rules etc. have also been collected.
Regarding the replication of datasources, I have done it in the DEV and checked it, do you mean that I first have to replicate it in the PRD and then do the transport ?
Thanks
Sonu
Message was edited by:
SONU

Difference between Portal Transport and Basis Transport

Hi Experts,
I have few questions .
1. What's the difference between transport in portal and transport in Basis.
2 . In user admin , we create users and assign them roles. Even Basis people will create
new userids and assign them roles. Whats the difference between these two.
3. In useradmin whats the difference between assigned roles and assigned groups.
Thanks a lot.

Hi,
I don't see any differnece in portal and basis transport
Content transport generally done from one landscape to other landscape. say from dev to test system
or test to production system.
we create user id using user admin role in portal ume or we can get users externally by using LDAP funtionality.
Using user admin role we can assingn users to rolese and groups.
Groups are used for a group of users. IF certain users have similar authorizations in portal then we group them in single user group and then assing this group to the roles. This is called authorization.
Role is used to display the portal content to the users and is the top level navigation in portal.
If I miss anything at basis level then someone can help you.
Raghu

Hello iphone users, I have a situation here.. I have an Iphone 4G that 2 days ago displayed the black screen with de apple logo, ive done the recovery mode over and over in diferente pcs(windoes, mac) and none seem to aknowledge the device, what to do???

hello everyone, as I have stated above, I have an Iphone 4G realtively new, just 3 months of use. I've never dropped it, nor got it wet. The problem is that the screen just one day went black and displays the apple logo, when I do the recovery mode everyway possible the screen shows the itunes link but the pc doesn't acknowledge it.. I've tried on many pcs (windows and mac) and none respond because the device is not shown on itunes it just says "driver not found"
please what to do???

Call Apple Customer Relations - 1-800-275-2273. Ask politely & firmly that you want to be transferred to Customer Relations. Tell them exactly what you stated in your post.
GOOD LUCK!
These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.

Excisable and Non Excisable plants for the same customer and same material

Hi All,
We have a customer who purchases the SAME goods from two different plants, one plant is Excisable and another plant is Non Excisable. So sales area of the customer is same for both the plants. When customer buys from Excisable plant Excise Duties should applicable and when the same customer buys from Non Excisable plant Excise Duties should not be applicable. If I maintain the Excise indicator as 1 in customer's J1ID then Excise Duties are applicable for the customer from wherever he buys the goods.(If he buys the goods from Excisable and Non Excisable plants Excise Duties are flowing).
So, my query is: if the customer buys from non-Excisable plant, Excise Duties should not flow.
So I am planning to create a new sales org for Non Excisable plant, then the sales area of the customer will change.
Is there any other way to over come this issue? Plz guide me.
Thanx&Regards,
RAMU

Dear Ramu
My suggestion is creating a new sales organization is not required just to fulfill this excise requirement.
Let us assume you have two plants
- 1000 is excisable and
- 2000 is non excisable
for material ABC
Now go to J1ID, select the tab "Material and Chapter ID combination" and maintain the excise tax indicator for plant 1000 only.
By doing so, while creating sale order, you input the delivering plant and based on the settings you maintained in J1ID, excise duty will be determined in that sale order.
thanks
G. Lakshmipathi

Duplicates and non-existent apps in the "Open with" list

My "Open with" list is a mess for nearly all kinds of files. I'm not sure how I could clean this up or edit it. Look at the image below for example. I have some idea about how this happened, but no idea on how to fix it.

That's LaunchServices. These are only cache files but can get corrupted. Launch /Utilities/Terminal and copy & paste this at the command line to rebuild LaunchServices: (be sure to copy the entire line it's a scroll)
Code:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user
Then press return. Wait until terminal returns to the command line. Quit Terminal. After that, log out and back in or restart. Let us know

PO for transport and connection with price of the materials

Hi all,
I have a little problem here and I would appreciate any kind of
help and advice!
If I make one PO for goods to one vendor, and differend PO for
transport of goods to differend vendor how can I link this
second PO with the first in order to increase the price of the
materials? I cannot use the transport as a condition in the PO
for the goods, it is required to make second PO for the value of
transport. Also it is required to increase the value of the
materials with the price of the transport, so I can't just put
the transport in cost center.
Please, help! What can I do in this case?

There is no standard way.
Only way transport costs can be added is through 'Delivery condition types' in PO.
Through custom programs, try this:
1) Enter delivery condition type with minimum value (e.g. 1 USD or 1 INR).
Indicate the Freight PO no & Item in some field in PO (or in a Z-table to link the freight PO)
2) During MIRO (use INVOICE_UPDATE BADI), fill the values for freight condition from freight PO.
Best regards
Ramki

Everytime I try to play a recently downloaded song I am told my computer is to authorized to play the requested song, but the computer is authorized. Went through all the steps iTunes support had on their website and none of them solved the problem.

Not quite sure what to do about this. All of the previous music that I have downloaded works fine but for the past week anything that I purchase from iTunes Store will not play because it states the computer is not authorized to play, but it is authorized and the purchased songs were purchased under the same account.

Have you tried this?
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389

Secure and non-secure access to the web application in one war

Say we have one web application (in one war) which includes JSP, servlets and the security intercepter. There is one business requirement to have most of the JSP(s) accessed via HTTPS, but a few JSP(S) accessed via HTTP.
My questions are:
a. Is this possible, or a reasonable requirement or a good practice?
b. if yes, what can we do to make it happen in the security intercepter implementation?
c. If not, what is the technical reasons?
Thanks much.

a) Yes its is reasonable and good practive, there is an overhead using https, so you should only encrypt file you need to. When you use an online store, only account details / payments are https, the shop itself is http
b) I dont really understand your difficulty. You can define a folder as 'secure' and put all your secure pages in this folder, leaving non secure files in a different folder. Whenever a page in the secure folder is accessed, https is automatically invoked.

The Case of Missing ID3 Tags... and non-Apple devices, like the Sonos

Ever since the debut of iTunes 6, devices other than my Mac and my iPod have been unable to find the ID3 tags associated with .mp3 files. If I rip a CD in iTunes 6 or 7, artist/album/track data (and album artwork) display properly in iTunes and on my iPod; but when I update my Sonos music library, for example, all it is able to see is the file name. So, for example, if I rip Jimi Hendrix's "Are You Experienced," the track "Purple Haze" shows up in iTunes correctly associated with "Hendrix" and "...Experienced." On the Sonos system, however, all it sees is the track "Purple Haze.mp3." No artist. No album. Ditto for placing one of these .mp3 files on a non-Apple mp3 player: track name only shows up. Bizarrely, if I rip CDs on an older PPC G4 running iTunes 4.0, and then import those files into either iTunes 6 or 7, the ID3 tags remain married to the files. Anyone have a solution to this vexing problem?
PowerBook G4 Mac OS X (10.4.8) 2 Gigs SDRAM
Core Duo iMac Mac OS X (10.4.8) 2 Gigs SDRAM

In the newer versions of itunes 6+7 (don't know about 5) iTunes by default will rename the file on the HD to match the info in the "Name" column of iTunes - this is true if you have the "Keep" option selected in iTunes prefs>Advanced>General.
With iTunes 4 this was not true. I would use one of Dougs scripts to rename all my files on the HD to be Artist-Song Name. You can still do this in iTunes 6+7 if you turn off the "Keep" option or you don't edit any info in the id3 tag once you have run the script.
I know nothing of the Sonos and other stuff - I can only think that is reading only the file sname and not the id3 tag info. If it doesn't have the capability of reading and displaying the id3 tag info then I think you are out of luck. iTunes is reading the id3 tag info.
MJ

I have made 3 separate appleid accounts and none of them give the option of not adding a credit card! I can't get anything free apps on my phone and when I called apple they said it would cost 300 dollars for them to tell me how to fix it!!! Help!!!!!!!!

I am beyond irritated with apple!! Need help with my appleid!! I have gotten 3 seperate appleidaccounts and it doesn't give me the options to not put my credit card information on their!!!! I can't access any free apps on my phone and I'm mad!!! I called apple and they wanted to charge me 300 dollars to tell me how to fix it!!! I will never buy an iPhone again if I can't fix the freaking problem!!!! Someone please help!!!!!

Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card:
http://support.apple.com/kb/HT2534
Step 3 is important, no matter whether you do this on a Mac or an iPad / iPhone:
Important: Before proceeding to the next step, you must download and install a free application.
My bill will be considerably less than $300.

Transportable and non transportable requests in the SRM EBP cusomizing

Similar Messages

Maybe you are looking for