Transportation Related DO - should only be procssed with shpmnt doc created

I have 2 types of sales order.
1) one sales order "ZDIR-direct sales" does not requires transportation (Shipment document) thus the process related to it is sales orde - > Delivery order -> PGI -> invoice
2) other Order type is "ZTRN - Transportation related" for which the process flow will be SO - > DO - > Shipment Document - > PGI -> Invoice
Now how can i control that all the sales through ZTRN order type should only be processed via shipment documnet. right now when in ZTRN sales mode, user can click on PGI in its DO and thus can invoice...Thus the shipment document is bypassed and pgi is directly carried out in DO.
Inshort, is there any control in starndard system that transportation related DO cannot be processed without shipment document.
Hope my query is clear
Thanks in advance.

Hi
SAP enhancement V56L0001 (use transaction SMOD to use this user exit)
The system calls this user exit in function module:
=> SD_DELIVERY_SHIPMENT_STATUS.
You can use the source code in this function module as a template.
regards,
Ramana

Similar Messages

How do I get iWork on OSX 10.8 to sync with iCloud docs created in iOS?

There's lots of support about accessing docs already stored in iCloud from iOS, but I can't find anything beyond the basic "turn iCloud on" support for the desktop.
I have an iPad (uptodate iOS and iWork apps) and lots of docs stored in iCloud. I can see those docs with Pages, Keynote & Numbers on my MacMini (OSX 10.8.4), but I can't see them on my MBP (just upgraded to OSX 10.8.4). On my MBP I've signed in to iCloud in [System Preferences/iCloud] and have 'Documents and Data' turned on. I've also made sure that my Apple ID is associated with my User Account in [System Preferences/Users & Groups].
On the MBP when I open Pages I get the open dialog that defaults to iCloud, but it doesn't show any of my docs. I've tried saving something to iCloud to see if that would jog it in to life, but the doc just has a little dotted cloud below and says "Waiting".
I've tried tuning off iCloud in System Prefs, I've tried restarting and I've tried being on a different network - no luck so far.
Anyone got any ideas?
Cheers

Yeah that's what I was doing before upgrading the MBP to 10.8, but I was under the impression it should be seemless in Pages etc now. :-/ I don't see why it works on my MacMini, but not my MBP when they're running the same apps and same OS.

I bought the wrong app, I should exchange Photoshop app with AI app

I should cancel Photoshop and should buy AI app.

Thank you a lot...^^
2015. 3. 19. 오후 10:23에 "Sheena Kaul" <[email protected]>님이 작성:
today i bought wrong app, i should exchange Photoshop app with AI app
created by Sheena Kaul <https://forums.adobe.com/people/Sheena+Kaul> in *Creative
Cloud Download & Install* - View the full discussion
<https://forums.adobe.com/message/7315839#7315839>

Downpayment should only be created with downpayment request

Hello Experts
I have requirement that F-48 (Downpayment to Vendors) should only allow payment using downpayment request.
As of now our users have authorization for F-48. So he forgets to post downpayment using downpayment request. He creates downpayment directly without request. I want to restrict this direct downpayment.
Please help me, how can I restrict F-48 without downpayment.
Meena

Hi Meena,
Check with your basis team for the tab "New Item" in F-48 for not visible or restrict it by authorization.
Regards,
Mukthar

IPhoto: No pictures only broken-line/square boxes where pictures should be. Scanning with the bar slide the pics appear for one or two seconds then are gone.

Grandson Son sabataged my IPhotos! Can't get pics to appear. Only broken-line/square boxes where the pictures should be. Scrolling with side bar brings up pics for 1 or 2 seconds then they are gone again. HELP! Please....
Raefisch

Restore from your back up is the most obvious way forward.
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work

Content has been indexed with Info only. Resubmit should only be performed

Hi All,
Im using the Oracle Content Server (OCS) , When im trying to checkin new document then i get the below mentioned error message can any one plz tell me that what is the problem.
Error Message:_
Text conversion of the file failed.
Content has been indexed with Info only. Resubmit should only be performed if the problem has been resolved.
Text conversion of the file '//awusrp04/PortalStg/oracle/inetucmstg/weblayout/groups/public/@enterprise/@hr/documents/document/s_013020.pdf' failed.
**Content has been indexed with Info only. Resubmit should only be performed if the problem has been resolved. **

Hello Experts,
I am Facing the Same Issue, anybody know the solution for the same?
Thanks in Advance.

Value based hierarchies and Period dimension should only contain 2 monthl

Hi,
Can anyone tell me what is value based hierarchies. And also can anyone let me know to filter the records in AWm because in Period dimension should only contain 2 monthly values (Oct. 2008 ( 200810) and Sep. 2008 ( 200809)) it is urgent.
Thanks
vel

The following definition of a value hierarchy comes from the OLAP Developers guide
"A hierarchy defined only by the parent-child relationships among dimension members. The dimension members at a particular distance from the base level do not form a meaningful group for analysis, so the levels are not named. For example, an employee dimension might have a parent-child relation that identifies each employee's supervisor. However, levels that group together first-, second-, and third-level supervisors and so forth may not be meaningful for analysis."
Typically this means that the source table has two columns, VALUE and PARENT, where PARENT has a (logical) foreign key relationship to VALUE. An example may be EMPLOYEE, MANAGER, where MANAGERs are also EMPLOYEEs.
The simplest way to restrict the values loaded into the AW is to define a SQL view over the source table with an appropriate WHERE condition. You then use AWM to map the dimension to your new view. E.g.
CREATE OR REPLACE VIEW RESTRICTED_TIME AS
SELECT *
FROM TIME
WHERE MONTH IN (200810, 200809)

Just picked up the AEBS - How should I set up with all my devices?

2010 MBP, 2006 macbook, 2 iPhones, iPad, and Netflix on the Wii.
Will want guest network, WPA2 across the board, different SSIDs for the bands, N for mbp and iPad, and usb HD for both laptops.
Any suggestions for how I should set it up with the above info? Stuff I should look into?
THANKS A TON!

Question - If I select the 5GHz to have it's on SSID, won't that negate the dual band benefit if I'm only connected to one of the bands?
Dual band can be confusing to understand.
The default setup of the AirPort Extreme will assign the same name (SSID) to both the 2.4 GHz and 5 GHz bands. +This is the setup that most users should use because computers and other devices will automatically connect to the band with the best quality.+
So, if you have a new computer and it's relatively close to the AirPort Extreme, it will probably connect to the 5 GHz band. If it's a few rooms away, it will probably connect to the 2.4 GHz band. Why? 5 GHz signals are faster, but they are not nearly as strong as 2.4 GHz signals, which penetrate obstructions more effectively than 5 GHz.
Unfortunately, the laws of physics dictate that in order to gain something (speed in the case of 5 GHz), you have to give up something in return (distance and penetration power).
If you have an older, slower wireless device, it's going to connect to the 2.4 GHz band whether it is close to the AirPort Extreme or at some distance because it cannot connect to the 5 GHz network.
So, why assign a separate name to the 5 GHz network? The only logical reason to do this is to "force" a computer to connect to the 5 GHz band (even if the signal quality is not as good as the 2.4 GHz band). You can "tell" your computer which band you want it to connect to if you have separate names for the 5 GHz band and 2.4 GHz bands.
If you enable the Guest Network, it is also a dual band affair with both 5 GHz and 2.4 GHz components. Both bands are assigned the same name (SSID) on the Guest Network and this cannot be changed. That's probably a good thing.
It will be much easier for +most users+ if they go with the default settings and assign the same name to both the 2.4 GHz and 5 GHz bands. If you think about it, the computer will automatically connect to the band with the best signal quality (which is really what you want). But, depending on the location of the computer, it may not necessarily be the band with the fastest speed.
I was always under the impression the dual band meant you were connected to both a 2.4 and 5GHz connection and therefore had "dual" the speed
Your computer can only connect to one band, either 2.4 or 5 GHz. It cannot connect to both bands at the same time. Dual band simply means that the router provides a faster and not so fast network with the same name. Computers pick the best band to connect to based on their capability and location relative to the router.
Message was edited by: Bob Timmons

GroupLayout can only be used with one Container at a time

Dear all,
I am a beginner so please don't throw rocks at me...
I have created two frames with NetBeans. One is the main frame (extends from JPanel) and the other frame I put it to be started when pressing a button from the main frame (the second frame extends from JFrame). Both frames are created using the designer in NetBeans, so the code for creating the GUI is automatically generated by NetBeans, so both frames use the same layout (GroupLayout).
Here is the code of the button from the main frame to start the second one:
private void manageCustomersActionPerformed(java.awt.event.ActionEvent evt) {
        // TODO add your handling code here:
        CustomerGUI custGUI1=new CustomerGUI();//CustomerGUI is the second frame
        custGUI1.setVisible(true);
}When I press this button from the main frame I get this runtime exception: Exception in thread "AWT-EventQueue-0" java.lang.IllegalArgumentException: GroupLayout can only be used with one Container at a time. The second frame is not opened.
How should I handle this?
What I want to do: I want to have a main frame, from which I can start additional ones (the main frame must be always opened, while the additional ones can be closed after performing certain actions). I read a little about internal frames and I think this can be a solution, but I must edit the existing design...
Thank you
With respect,
Don
Edited by: don1983p on Dec 16, 2008 2:21 AM

AndrewThompson64 wrote:
There are those that maintain that JFrame should never be extended. I am not convinced, but most cases where a JFrame is extended would be better coded as simply configuring the JFrame within the main(). GUI builders such as found in NetBeans seem to extend JFrame as a matter of course.I too am not rigorous or religious about this either, but try to adhere to this as a matter of practicality and convenience, I find that if I don't extend a JComponent but rather use composition rather than inheritance, it's much easier to use objects of my class when programming in Eclipse. For instance in Eclipse (and in most IDEs), if I type my object name and then a period, it will show all of the method's available for me to use on this object. If I subclass JPanel or JFrame, I'll see a gazillion methods most I don't want to see, and thus most are clutter. On the other hand if I use composition, I'll only see a small number of methods and these will be only the methods that I want to see and need to use.

HT1848 I am trying to transfer my purchases from my iPhone 5 to my new Mac computer. I get the message stating that it can only be synced with one computer at a time. I have tried the 2 other ways and I get no options to transfer my purchases. Help?

I am trying to transfer my purchases from my iPhone 5 to my new Mac computer. I get the message stating that it can only be synced with one computer at a time. I have tried the 2 other ways and I get no options to transfer my purchases. Help?

If you see Devices in the big list on the left-hand side of iTunes, it should show the name of your iPhone right below it. You can right-click (or hold ctrl and left click) on the name of the iPhone there, and choose "transfer purchases from iPhone".
If you're on iTunes 11, you won't see the big list of the left until you go to the View menu at the very top (where you see iTunes/File/Edit/View/etc) and choose Show Sidebar. Then do the same thing: right-click or ctrl and left-click on the iPhone's name below Devices and "transfer purchases from iPhone".
It'll ask you to authorize the computer for your Apple ID if you haven't yet; to do that, you just type your Apple ID and password in when it asks. If it says you are not authorized but doesn't automatically give you an option to do so, then you can go to the Store menu at the very top and choose "authorize this computer".

I tried to sinc my photos and i ended up deleting off my phone all the pictures. i only ended up with one folder, and i cant figure out how to put rest of folders from my computer back on my phone.....help

i tried to sinc my photos and i ended up deleting off my phone all the pictures. i only ended up with one folder, and i cant figure out how to put rest of folders from my computer back on my phone.....help
and on a second problem. I need to know for sure that my contacts are backed up on my computer

Create a parent folder on your computer to store the named folders of photos that you want transferred to your iPhone. Under the Photos tab for your iPhone sync preferences with iTunes, select the parent folder. All named folders of photos within will be transferred to your iPhone as separate folders or albums.
Regarding your 2nd question, this should be easy. Your contacts should be available on your computer with or without an iPhone or any cell phone, which can be lost or stolen.
Although contacts are included with your iPhone's backup which is updated by iTunes as the first step during the iTunes sync process, not a good idea to depend on this either since the iPhone backup includes a significant amount of other data. Contacts are designed to be synced with a supported address book app on your computer. With Windoze, this can be with Outlook 2003, 2007, or 2010 along with syncing calendar events and notes, or with the address book app used by Outlook Express with XP and by Windows Mail with Vista and Windows 7 called Windows Contacts for syncing contacts only.

I have Logic Pro 8.0.2 and would like to upgrade. I'm running OS Lion on a 2010 MacB Pro. What is the best option? Logic Pro 9 App or Logic Studio? Can't find upgrade price. Or should I just stay with Logic 8?

I have Logic Pro 8.0.2 and would like to upgrade. I'm running OS Lion on a 2010 MacB Pro. What is the best option? Logic Pro 9 App or Logic Studio? Can't find upgrade price. Or should I just stay with Logic 8?

Same here, I have Logic Studio 8 and wouldn't mind staying with that version, except that the installer won't run on my new Macbook Pro as PowerPC apps are no longer supported. That's the message I get in any case.
I use to run Logic on a 2006 Macbook Pro.
I guess that makes me a very unhappy Apple user! I've been using Logic from the Emagic days, bought every upgrade only to see Apple kill what used to be one of the best Pro Audio application. Imagine if they had done the same to Photoshop, there would be a lot of unhappy designers out there
Paying the full price for years to slowly see your daily app go down in price & efficiency until it's given away at $199 for semi pro users. Well, at least ProTools is stil alive & kicking so I guess that's the way forward now.
This is coming from someone that never ever used a Windows machine to make music! Life is good still!

User should only work on created Form

Hi all!
Here is my problem.
A user is working in B1. For example:With a double_klick on a Textfield and a user created Form will be shown.
No the User should only work with this Form until its closed! There should be no possibility to open an other form or so.
Like if you get a MessageBox, there is no other "normal" way to work on until you close this Messagebox.
May it is possible to let the Form act like such a Messagebox.
Thanks for replies..
Matthias

The Sample you speak of show the hack/workaround (Not true modal functionality).
From the sample:
    Private Sub SBO_Application_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.ItemEvent
        ' Don't let the user to move to other forms
        Dim EventEnum As SAPbouiCOM.BoEventTypes
        EventEnum = pVal.EventType
        If bModal And FormUID <> "Modal" Then
            oForm.Select() ' Select the modal form
            BubbleEvent = False
        End If
        ' If the modal from is closed...
        If FormUID = "Modal" And (EventEnum = SAPbouiCOM.BoEventTypes.et_FORM_CLOSE) And bModal Then
            bModal = False
        End If
    End Sub
In the sample the bModal bool set to true when opening the form block all events by selecting the modal form on each event and setting bubbleevent to false.. the EventEnum = SAPbouiCOM.BoEventTypes.et_FORM_CLOSE set the bModal to false so events can continue
Biggest problem with this is if you use a eventfilter (which you should do)... here you need to remove the event filter along with setting the BModal (not in the sample), and reapply it after form close.
<i>Kind Regards
Rasmus Wulff Jensen | http://www.b1up.net</i>

Fedex can only be used with dreamweaver using metric, not pounds (lbs)

Fedex can only be used with dreamweaver using metric, not pounds (lbs), evidently?
This as per their tier 2 tech suport.
They say I should just convert to metric, no joke!
Any ideas would be greatly appreaciated?
Also a warning to anyone thinking of using business catalyst for their site, sorry, their business.
Their note to me:
Your request (# 82816) has been solved. To reopen this request, reply to this email or go to the Help & Support page.
              Silviu Ghimposanu (Adobe Business Catalyst Support)
              Apr 14 15:23
    Thanks for contacting us Michael
Our engineering team has detected some problems when doing weight conversions (from the quantities entered in the interface to what’s used when making the API calls to FedEx) -
He have added this to our internal bug tracker to be fixed for one of the future releases.
    I realise that this might not be what you wanted to hear,but at this moment we do't have a workaround in order to send the
dimensions in pounds and not in KG
    Sorry for this inconvenience!
Kind regards,

If you're in US it will be in pounds. If your site is set any other country
in the rest of the world it will be metric. So BC or as you call it
Dreamweaver will look at the site country, which you set when creating the
site

Script Alert "You should only run scripts from a trusted source."

I created a small javascript which opens Photoshop and resizes some images.
I want to be able to double-click the .JSX file from Windows Explorer, and have Photoshop execute the script. Likewise, I want to be able to run the .JSX file from the command line.
The script runs perfectly. However, the problem is that I don't want any user interaction. I want to be able to run the script from the command line without the user having to click anything. What happens now when I try to run the file from Windows Explorer of the command line is, I get a Script Alert with the following text:
You are about to run a script in Adobe Photoshop CS3. You should only run scripts from a trusted source. Do you want to run the script? Yes/No
Is there any possible way to bypass this message or to answer in the affirmative?
Thanks,
Jamie L.

Hi... Sorry to revive such an old thread,
Does anyone know the "trusted source" folder for MAC CS4.
EDIT!
My bad. "The /users/<user_name>/documents/Adobe Scripts" folder is working for this purpose for me. I needed a path to it and forgot that the ~ resolves to the current user. Sweet.
-Bill

Transportation Related DO - should only be procssed with shpmnt doc created

Similar Messages

Maybe you are looking for