Transporting BAPI from ECC5 to ECC6 - FM definition isn't avail at target

Hi
I have a BAPI developed in ECC5 System - ZBAPI_TEST, under a function group - ZFG_TEST within a package - ZPKG_TEST.
All these objects are assigned to the same TR number.
I have released, generated Co/Data Files and moved these TR (Co/Data Files) to ECC 6 System.
The associated structures are available in ECC6 System - where the Function Module name is present - BUT NO SOURCE CODE!!!
Is there any special rules we need to follow while transporting a BAPI from one system to other?
Thx
Rich

Please check if the the two includes also have activated and moved or not.
if yes try a re transport.

Similar Messages

Upgrade from ecc5 to ecc6 old data like PRD640_1 is still there

Dear All,
we have resent   upgrade from ecc5 to ecc6 and i have some quires regarding the datafile.
In sapdata1 -4 i see all old data like PRD640_1 i still there .Please suggest it is ok or it should not be there in the sapdata.
in db02 tablespace
PSAPEL701D
PSAPEL701I
PSAPPRD
PSAPPRD640
PSAPPRD701
PSAPPRDUSR
PSAPTEMP
PSAPUNDO
PSAPUNDO2
SYSAUX
SYSTEM
There is once more thing when i am extend the table from brtools for
BR*Tools main menu 2 - Space management 1 = Extend tablespace 3 ~ Tablespace name (tablespace) ... []
1 - BRSPACE profile (profile) ...... [initPRD.sap]
2 - Database user/password (user) .. [/]
3 ~ Tablespace name (tablespace) ... [PSAPPRDUSR]
4 - Confirmation mode (confirm) .... [yes]
5 - Scrolling line count (scroll) .. [20]
6 - Message language (language) .... [E]
7 - BRSPACE command line (command) . [-p initPRD.sap -s 20 -l E -f tsextend -t
PSAPPRDUSR]
c
c
Options for extension of tablespace PSAPPRDUSR (1. file)
1 * Last added file name (lastfile) ....... [L:\ORACLE\PRD\SAPDATA4\PRDUSR_4\PR
DUSR.DATA4]
2 * Last added file size in MB (lastsize) . [460]
3 - New file to be added (file) ........... [L:\oracle\PRD\sapdata4\prdusr_5\pr
dusr.data5]
4 # Raw disk / link target (rawlink) ...... []
5 - Size of the new file in MB (size) ..... [460]
6 - File autoextend mode (autoextend) ..... [yes]
7 - Maximum file size in MB (maxsize) ..... [500]
8 - File increment size in MB (incrsize) .. [20]
9 - SQL command (command) ................. [alter tablespace PSAPPRDUSR add da
tafile 'L:\oracle\PRD\sapdata4\prdusr_5\prdusr.data5' size 460M autoextend on ne
xt 20M maxsize 500M]
BR0259I Program execution will be continued...
BR1049W Not enough free space in L:\oracle\PRD\sapdata4\prdusr_5 for total maxim
um size of all database files of tablespace PSAPPRD located on this disk volume,
missing at least 741702.647 MB
BR1049W Not enough free space in L:\oracle\PRD\sapdata4\prdusr_5 for total maxim
um size of all database files of tablespace PSAPPRD640 located on this disk volu
me, missing at least 137942.647 MB
BR1049W Not enough free space in L:\oracle\PRD\sapdata4\prdusr_5 for total maxim
um size of all database files of tablespace PSAPPRDUSR located on this disk volu
me, missing at least 13522.647 MB
BR0668I Warnings or errors occurred - you can continue to ignore them or go back
to repeat the last action
Please suggest what is right configuration and how to sol ther error in brtools.
Regards,
Kumar

Hello Kumar9,
if I understoon correctly your last reply, you have doubts if PSAPPRD640 should exist at all, correct?
Please do the following:
1) Check any object assigned to this tablespace PSAPPRD640
2) If any object occupied to PSAPPRD640 then reorganise to new tablespace
If any object not occupied to PSAPPRD640 then check the table entry
   a)TAORA for tablespace PSAPPRD640(if exist delete)
   b)IAORA for tablespace PSAPPRD640(if exist delete)
3) If above done then drop the tablespace through BRTools.
Best regards,
Tomas Black

SAP extract to Excel changed after migration from ECC5 to ECC6

Hi everyone,
This issue is about getting a proper table when displaying SAP reports in Excel. When extracting to Excel, the data base is presented with summary yellow lines whereas we would rather have a regular table without subtotal. This issue appeared when the system was migrated from ECC5 to ECC6. Please notice that one of the user has currently a proper display. Do you know which parameter shall we change?
Thanks!
Stan B.

There are some default setting in the parameters,
Like
RPO0 - User Settings
From FI transactions you can change ti your default settings
Have a look to:
FIT_ALVC X FI Line Items: ALV Grid Control
With KSB1 I see it direct without sub totals and saving.
Click on spreatsheet
Select All Available formats
Select EXCEL (In Existing XXL Format)

Technical upgarde from ECC5 to ECC6 EHP4

Dear All,
We are having technical upgarde from ECC5 to ECC6 EHP4. I have have some queries as client what need to be check after upgarde.When golive cahke is done what are check list apar from system is up and running.
Please sugegst
Regards,
Kumar

SAP offers a pre-golive check before actual go-live by logging into your system and doing some important checks as per the requirement for technical or functional go-live check...
So, you want SAP to do pre-golive check, just open up the connection between SAP and your sap system, at the same time, a connection from Solman to SAP too..maintaining the connection details in secure area
You have to open a message in component XX-SER-TCC to find out if your installation is scheduled for a Go-Live check which is conducted by SAP and itu2019s partners.
Go-Live Functional Upgrade Analysis u2013 ideally 6 months before Golive u2013 basically checks your hardware requirement , will it be able to accommodate the increase in the functionalities caused by the Go-Live, also some parameter recommendations to fine-tune your system.
Go-Live Functional Upgrade Verification u2013 This is normally 2 months after the Go-live which is to see eu2019thing is fine after the upgrade.
Then you have normal Earlywatch session , each installation is entitled for 2 free earlywatch session in a year, in this performance tuning is done for your system, hardware,memory, I/0 bottlenecks are identified.
Reports of all these sessions carried out by SAP is then sent to you in form a MS-Word document and you can follow the guidelines mentioned and call up SAP or mail the person who has done the session for you for any clarifications.
Usually once a session is scheduled.
SAP will contact you to open the connections for them, so that they can prepare the system before the actual session takes place , in which they see , if SDCC version is good enough so that they can download the data from your system into their internal system on which they carry out the analysis
Refer to https://websmp208.sap-ag.de/earlywatch

Moving/Transporting programs from 46c to ECC6

Guys,
For our upgrade we will start with a ECC6 system from scratch. The questions are - is there a tool to transport ABAP programs/functions from 46C to ECC6? Or in your experience it is better to manually do a download from 46C then manually upload to ECC6?
Thanks for your input.
Yan Guan.

Hi Yan,
If you are upgrading an existing 46C system to ECC 6.0 then the Z and Y programs in the system will be there even after your upgrade.
We will start with a brand new ECC system from scratch
means you are creating a system for the first time as ECC 6.0 ?. Then if there is transport path between your 46C sytem and ECC 6.0 sytem, you can transport the objects. Otherwise go for download/upload option. But I think creating a transport path is the better option.
Regards,
Soumya.

CU&UC from ECC5 to ECC6 Ehp4

Hi,
We are planning to run a CU&UC from a NUC ECC5.00 system to UC ECC6 Ehp4/NW 7.01 and need to check if this is supported.
I have trawled through OSS/SDN etc and cannot see anything to say that it is not, but an OSS message placed regarding the supportability said that this is not possible as "ECC6 EHP4 SR1 Media is available as UNICODE ONLY, so you
will not be able to perform 'normal' CU&UC using 'EHP4 ready"
There is a NUC 7.01 kernel available, so I am not sure what SAP mean by this??
Regards,
Mark

Hi 'Basis Team',
The original question was "We are planning to run a CU&UC from a NUC ECC5.00 system to UC ECC6 Ehp4/NW 7.01 and need to check if this is supported." is pretty clear I think.
What muddied the water is a reply from SAP to an OSS message placed asking the above question where they say that this is not possible as there are no NUC ABAP loads delivered after ECC6 SR3.
This reply goes against all SAP doco that we have read, and as you say, you have done the same CU&UC that we are tring to achieve.
BTW, which upgrade kit did you use? The Ecc6 Ehp4 Ready SRx one??
Cheers,
Mark

Recommended upgrade method from ECC5 to ECC6 for lowest production downtime

Hello everybody,
I've been looking through multiple documents concerning a system upgrade and I am still unable to figure out the recommended method for upgrading a system with minimum downtime.
My scenario requires that tests as rigid as possible will be performed and that development will be halted for the shortest time possible , therefore development must be continued after the initial upgrade.
We are currently debating the required way to do this - what should be done with the change requests that currently reside in the DEV system, in which steps the incomptabilities are fixed and so on.
I've decided that I'll share my thoughts with you and maybe you guros will be able to point out mistakes in the methodology.
1. ECC 5 Production System is copied aside, lets call this system EPC
2. Change requests from DEV ECC5 are copied to this EPC System.
3. EPC system is upgraded to ECC6.
4. Bugs and incomptabilities such as unicode incomptabilities are fixed and merged in a change request
This ends the preperation step and in my opinion is sort of a preperation step.
During the whole preparation step, which to my estimate could take at least one month, development in the original system must be continued, so this is my main trouble.
What is the recommended procedure from here?
I assume that another production must be done on the day of the actual upgrade start, then the fixes from the previous preperation system are copied to this actual ECC6 Production, but I am rather lost as far as it goes to having an ECC6 Dev with most current change requests.
I would appreciate any hints and help,
thanks in advance,
Eli.

Ok, your idea of having a production copy for development and tests is a good upgrade strategy, we have done this twice due high quantity of developments and configuragion changes but I don´t see why you wrote " copy change requests from DEV to EPC " your whole configuration, programs, etc, are already in EPC once you copy the system.
In this scenario every change made in DEV ECC 5.0 must be also replicated and tested in EPC 6.0 because you cannot use the change requests from 5.0 in 6.0 once in productive upgrade, let me list the global steps:
1.- Homogeneous system copy from PRD to EPC, you will get a working test platform
2.- Upgrade EPC to 6.0
3.- Developers and functionals will do all respective changes and generate chage requests.
Once EPC is ready
4.- Upgrade DEV system to 6.0 transport change requests created in EPC to upgraded DEV, from this point you should only do emergency changes using Q&A system.
5.- Upgrade Q&A system, transport change requests from DEV, no changes are permited from now until PRD is upgraded.
6.- Do all tests very carefully
7.- Upgrade PRD transport change requests
Then you are ready. the downtime can be tune trough EPC, DEV and Q&A systems so you can determine what you shoud do to assure the shortest method.
I recomend you to use the downtime minimized upgrade method and from every upgrade take a deep look at the upgrade report generated after the whole process is completed.

Transporting Transport Request from One System to other

Hi All,
I want to create tranport request from ECC 5.0 System to ECC 6.0 system.
Please let me know steps for creating transport request and transporting transport request from one system to other system.
Thanks in advance.
Best Regds,
zubera

Hi,
You cannot transport request from ECC5.0 to ECC6.0.
Instead follow this:
<b>In ECC5.0</b>
Include all the objects into a transport request & provide the transport request no. to BASIS.
BASIS team will create 2 files for you based on the transport request no.
<b>in ECC6.0</b>
Provide the 2 files to BASIS Team & ask them to import them.
The objects would be available in ECC6.0
Best regards,
Prashant

PC00_M14_CDTA ECC5 to ECC6 Upgrade Missing Selection Field

Hi All,
Found out Selection Field of (Pay date) during Upgrade from ECC5 to ECC6 on TCODE : PC00_M14_CDTA.
More information you can refer to below print screen.
Thank in advance for advice.
Trevor Wong.

This has been replaced by "Requested Execution Date". Here is the standard hlpe for this:
Requested Execution Date on Which the Payment Is to Be Made
Use
In this field, you can enter a date on which the bank is to execute a payment. The date is transferred together with the payment information to Financial Accounting (FI), where the payment is executed.
You can use the date to override the default setting or the date determined by implementing the Business Add-In (BAdI) Change of Requested Execution Date for the Payments (HRDME_B_ REGUH_DUE_DATE).
In many countries, the system date is used as the default value for the execution date. In some countries, the payment date of the payroll period is used.
Dependencies
The following sequence applies to determining the execution date:
1. The defined default value is used as the execution date.
2. If the BAdI HRDME_B_ REGUH_DUE_DATE is implemented, the execution date is determined using this BAdI.
3. If a date is entered on the selection screen of the preliminary program, this overrides the default value or the value determined by the BAdI.

Error while uploading Transport request from SAP ECC6.0 EHP4 to SAP ECC 5.0

Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the transport request from one sap system which have a set of developments(contains screen programs)
for example downloaded all co files and data files
control file: K900470.SAD and Data file: R900470.SAP from transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
we tried to add in the import queues using TCODE: STMS and trying to import.
During import we get the below error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contact the SAP support.
End with rc : 16
Please help me on this
We are trying to copy from ECC 6.0 EHP4 to SAP 5.0 and SAP 4.7EE
Thanks & Regards
Murali Papana

Did you see that you tried to transport to an older release!! You should have expected such a result.
Before doing such a thing, you should have looked at SAP notes to see SAP recommendations, if any. And you're lucky, there are ones: [Note 1090842 - Composite note: Transport across several releases|http://service.sap.com/sap/support/notes/1090842]. You need to know that ECC6 corresponds to SAP Basis 7.0, and ECC5 corresponds to SAP Basis 6.40.

Transport Request from ECC6 -- 4.7 Enterprise

Moderator message: please use a more meaningful subject in future
Hi all,
Please, do you know if is it possible to release a Tranport Request (with ABAP Workbench Object, such as ABAP Dictionary, Function Modules, ABAP Objects) from SAP ECC6 and then import the Transport Request into ECC5 or into 4.7 Enterprise SAP system??
I would like to release the transport request (generating COFILE and DATA file) from ECC6 and enqueueing them into import queue of the target system.
The COFILE and DATAFILE will be recognized by:
1) 4.7 Enterprise system or not?
2) ECC5 system (based on Netweaver 2004), or not?
(Then I know that it could be some syntax errors to correct, after import...)
Thanks in advance.
Regards,
Albert
Edited by: Matt on Nov 21, 2008 4:15 PM

Not sure if STMS will prevent you from doing that, you could try by transporting a simple, single customer object. You could also ask in forum "Netweaver Administrator", there is probably more expert on this matter.
However you should never transport SAP standard objects this way, due to the different software versions in both systems. Also customer objects might have a problem due to new language constructs in the newer versions.
Thomas

Transport Request from ECC6 -- 4.7 Enterprise: is it possible?

Hi all,
Please, do you know if is it possible to release a Tranport Request (with ABAP Workbench Object, such as ABAP Dictionary, Function Modules, ABAP Objects) from SAP ECC6 and then import the Transport Request into ECC5 or into 4.7 Enterprise SAP system??
I would like to release the transport request (generating COFILE and DATA file) from ECC6 and enqueueing them into import queue of the target system.
The COFILE and DATAFILE will be recognized by:
1) 4.7 Enterprise system or not?
2) ECC5 system (based on Netweaver 2004), or not?
(Then I know that it could be some syntax errors to correct, after import...)
Thanks in advance.
Regards,
Albert

OK,
So, from your reply I understand the following:
1) Techincally it is possible to Export an ECC6 Change Request and then import it in a ECC5 or 4.7 SAP system, i.e. the cofile and data file generated by ECC6 will be read without problem from STMS of the target ECC5/4.7 SAP system.
2) Since my Change Request contains only Custom objects (Z development in Package "Zmypackage") there are no possibilities to break down the SAP system. The worst case may be: my Z Workbench objects will be not activated (for example for syntax errors).
Is it correct?
Many thanks!!!
Regards,
Albert

Data migration from ECC5.0 to ECC6.0

Hi All,
Is there a standard SAP utility to migrate the data from ECC5.0 to ECC6.0? Assumption is that all the standard fields and the transactions are same. Good example for this case is standard material master, Purchase order, purchase info record etc.
Currently I am planning to extract the data from source system (using custom program or table download etc...) and upload the data into target system (using LSMW, eCATT, BDC etc...).
Is there a standard way to load the data into target system without extraction and upload? Please let me know.
Thanks
Nagarajan

ALE Customizing
1)     IMG > Application Link Enabling (ALE) > Sending and Receiving > logical systems > Define Logical System: name it XXXXXX
2)     IMG > Application Link Enabling (ALE) > Sending and Receiving > Systems in Network > Asynchronous Processing > Assigning Ports > Define Port: name it XXXXXX   Description: Files for Migration to YYY
The port need to be defined beneath FILE
The IDOC record types for SAP Release 4.x need to be selected
A physical directory is needed. One must be able to map this directory with the Windows explorer to copy the file to the network or local drive.
Function module: EDI_PATH_CREATE_CLIENT_DOCNUM
In order to prevent unprocessed files being overwritten, you use function modules which generate file or directory names dynamically, that is to say, at runtime.
3)     IMG > Application Link Enabling (ALE) > Modelling and Implementing Business Processes > Cross-Application Settings > Global Organizational Units > Cross-System Company Codes
a)     Cross-System Company Codes
b) Assign Cross-System Company Code to Chart of Accounts
c) Assign Company Code to Cross-System Company Code
Cross-system company codes are used in the distribution in financial accounting. There is exactly one central system for each cross-system company code in the distributed environment. One company code has to be assigned to this cross-system company code on each system involved in the distribution.
When sending an IDoc with company code-dependent data, the company code is replaced with the cross-system company code in all company code fields.
4)     IMG > Application Link Enabling (ALE) > Modelling and Implementing Business Processes > Maintain Distribution Model and Distribute Views
Here we need a distribution model
     Structure: model view (call it XXXXXX)
               Sending system (AAAAAA)
                    Receiving system (XXXXXX)
5)     IMG > Application Link Enabling (ALE) > Modelling and Implementing Business Processes > Predefined ALE Business Processes > Logistics > Master Data Distribution > Proposal for distribution model: Customer and vendor masters
(Beside of customers and vendors, we need to add the message type BOMMAT for material bill of materials and MATMAS for material master to to the distribution model, probably manually in step 4. Depending on further requests for automatic migration the one or other message type may need to be added later )
6)     IMG > Application Link Enabling (ALE) > Modelling and Implementing Business Processes > Partner Profiles and Time of Processing > Maintain Partner Profile Manually
Partner profile type/Partner type: LS logical system
Partner profile/Partner number: XXXXXX
Details at Post Processing agent
Typ: US user
Agent: JJJJJ
Lang: EN
Outbound parameters
Message type:     ADDR2MAS
               ADR3MAS
               ADRMAS
               MATMAS
               CREMAS
               DEBMAS
Details per message type like this:
Receiver port: XXXXXXX Output mode: Collect Idocs and Do not start subsystem
IDOC type:      for     ADDR2MAS   use      ADR2MAS02
               ADR3MAS          ADR3MAS02
               ADRMAS          ADRMAS02
               MATMAS          MATMAS03
               CREMAS          CREMAS03
               DEBMAS          DEBMAS05
Activate syntax check
7)     Authorization needed to execute Transactions:
BD12 Send Customers
BD14 Send vendors
BD10 Send material
BD30 Send bill of material
Depending on future migration requests for other objects we may need some more.

Real Estate Management Upgrade from Ecc5.0 to Ecc6.0

HI Gurus
Can any body guide me what all upgrade issues from Functional Prospective are there in Real Estate Management from Ecc5.0 to Ecc6
Thanks and regards
Ramarao

Hi,
Pleae use the link http://solutionbrowser.erp.sap.fmpmedia.com to find out the newer functionalitites as per SAP product release modulewise.
Hope this helps you.
Rgds
Manish

Error while importing BAPI from ECC6 in to informatica

Hi,
When the abaper is trying to import BAPI from ECC 6 to Informatica,
An error is getting generated,
getFunctionList failed: RFC Error Information:
Group:SAP system exception raised
Key=RFC_ERROR_SYSTEM_FAILURE
Message=Syntax error in program SAPLZPMF
Please advise,
Thanks.

Kris,
The program SAPLZPMF is not unicode compatible, accoring to its program attributes.
This is the error that I got.
What do i do next?
Please advise.
Thanks.

Transporting BAPI from ECC5 to ECC6 - FM definition isn't avail at target

Similar Messages

Maybe you are looking for