Transporting data from Dev to quality using CMS

hi....Fri's
i am transporting data from development to quality, igetting this error
Workspace was not defined for software component version PROC_SA_PROJECT , 1.0 of unilever.com Assign the software component version in the Landscape Configurator of the Change Management Service to a track..
who will define the workspace for the SWCV, how can i rectify this error.....
thanks in advance
Pasi.

hi pasi,
just got to the link
http://host:port/devinf/main.
it will ask for cms user,get the details from basis.
afte login go to LANDSCAPE CONFIGURATOR
there select IR.REP and configure respective
consolidation,production .
please eneter in consolidation field " http://<quality host><port>/rep
and production field as "http://<production host><port>/rep
now select IR.DIR and configure similar to IR.REP and replace rep with dir
give consoldated system(QUALITY system) http://<quality host><port>/dir
and and production field as "http://<production host><port>/dir
now cms is done with configuring part
now add the software component which u want to export .
Thanks & Regards,
Rama Krishna

Similar Messages

Transport error from dev to quality

HI,
I am getting following error from Dev system to Quality while transporting the request please suggest me the solution.
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Activation Mode
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Activation Mode
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Activation Mode
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Post-import methods of change/transport request completed
      Start of subsequent processing ... 20100409231713
      End of subsequent processing... 20100409231716
Thanks,
kranti

Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKDATE is not available in version A
Inconsistencies found while checking DataStore object ZTCM_D02
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Delete Mode
Errors occurred during post-handling RS_AFTER_IMPORT for ODSO L
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import methods of change/transport request D21K918324 completed
     Start of subsequent processing ... 20091112090953
     End of subsequent processing... 20091112090954
can u please post complete error message that ur getting
in the above one the DSO is sent to quality but without infoobjects in Quality
so the tranport got failed

How to Transport changes from Dev. to Quality and production

Hello Friends,
I've done the below changes in IR
1.Added idoc in Imported Idocs
2.Added new Interface Mapping
3.Added new Message Mapping
In ID:
Chagned Receiver Agreement
Changed Interface Agreement
Please let me know how i can move the changes to Quality and Production..
Pls. provide me the steps to create Transport and how to transfer.
Thanks in advance!!!
Best Regards
Prasad

Hi,
By using File system or cms you can transport, better to do the configuration steps manually to avoid ther errors.
We can do some changes to move
Moving Dev to QA changes
1.SLD: are there any changes we need to do.
If you have common SLD, then I doubt if you may need any changes on SLD side.
The Business systems you had used will be the same you may use in Q-Landscape.
2.IR: are there any changes we need to do.
---> No changes required, you need to export .tpz file from Development box and have to import it in Q-box
3.ID: do we need to recreate it fully or after importing,just change the Communication channels will
do.I am confused here.
You need to reconfigure all communication channels, if SLD changes are OK then business system will
change automatically and in communication channel just filled in correct IP/password etc.
---> Similar to IR, you can transport these objects also. But you may need to do related changes to communication channels, if you will be referring to different Sender systems and Receiver systems.
Then as mentioned in previous posts you may need to maintain those Business systems in SLD also.
4.RWB: such as alerts,and if there are any...
--> The Alerts will not be transported....you need to create it as new setup for every box.
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/09/88f339db9911d2b41a00609419f767/content.htm

Transporting WebServices from Dev to quality to production.

Hi Gurus,
I have created custom web services in my dev system and i am wondering, if i need to create the WSDL's seperatley in QA and PROD systems (for the transported RFC or BPI in theses systems).
Reason being the WSDL in DEV system will point othe the RFC/ BAPI in the dev system only.
Is it required to create new in each system..
Please provide me your pointers.
Thanks and Regards,
Anto.

Hi there,
You are mixing two concepts together here.
ABAP components, JAVA components, COBOL components etc are pure SDLC components. In a SERVICE context they are service implementation application components not really the service itself. WSDL is the service contract.
What is all about a service is SERVICE interface, service messages, service data types, service ports, binding and service location.
In a well defined service life cycle methodologies there will be something called seperation of concern which should address how to associated service implementation component should transaport among application layers such as DEV,QA, PROD etc and how to transport service contract as service entities between different layers.
Service entities such as schema are layer independent entities so it should not have a specific layer dependency.
However when you bring all service metadata through a service contract such as WSDL you have to design the WSDL in such a way so that dependency can be minimized.
If you can look into details of Abstract WSDL and Concrete WSDL concept, you know the FACT except service location and binding there is not much depencency specific to a given layer such as DEV or QA.
Thanks

Transporting variant from Dev to Quality

Hi All,
I have Modified Standard Layout (This one is ALV layout ) and saved it , I have assigned to one Transport request ,
I have released that one , But In the quality I am unable to see that one .
anybody please guide me.....
Thanks
Durga Prasad.

>
Durga Prasad wrote:
> I have Modified Standard Layout (This one is ALV layout ) and saved it , I have assigned to one Transport request ,
>
> I have released that one , But In the quality I am unable to see that one.
May be i am stupid to ask this, "Was the transport imported to QAS?" Please clarify ...
Because releasing the TR alone does not mean the changes will be reflected in the subsequent systems.

Error while Transport objects from DEv to QA-File transport

Hai Experts!
While exporting objects from Dev to Quality using File Transport. it taking long time and no erro msg is thown and it is not getting end .Did any face this problem. Can any one help me to solve this.
Regard's
Preethi.

Hai!
Issue is solved.
I try to export the Individual object -->Message mapping.
While exporting i unchecked the Option With software component version Defenition.
Now it is success. Thanks all replies.
Regard's
Preethi.

Table Technical settings for transfer data from developemnt to Quality

Hi All,
Please let me know which table techinical settings required for to transport table with data from development to quality?
Thanks & Regards,
padmaja.

Hi,
You do not require technical settings to transport data from dvlpmnt to quality.
However, you can transport any tables entries with a simple trick:
(1) Create a workbench request
(2) Change the request (or its task) and add the following entry: R3TR TABU <name of table> =>
(3) Enter the key values you want to transport, e.g.:
- <client>* for all entries of the current client
- add additional restrictions for the table entry (<client><bukrs>* for all entries of a given company code)
Best regards,
Prashant

Aggregation level transportation from dev to quality

Hi,
I have 2 aggregation levels in my mutiprovider. How can I transport these 2 aggregation levels from dev to Quality systems?

Hi,
you can collect the aggregation levels in transport connection (transaction rsa1 --> transport connection). There is a folder "Planning" and a type "Aggregation Level" (technical name: ALVL). Just select your aggregation levels and add them to a request. Please be aware that depending objects such as the multiprovider have to be transported to your quality system at same time if they are not already existing over there.
Brgds,
Marcel

Transporting a routine from dev to Quality

Hi Frnds,
I have transported a transformation from Dev to Quality. After that i got a requirement, so that i have written routine for a infoobject in Dev. Now i want to transport only that routine to quality.
Here in transport connection i am not able to find out the routine bcoz this transformation having more than 20 routines.Here in transport connection routines are with technical names.
How can I find out my routine technical name?
Or Is there any other way that i can transport this routine only into quality?
Regards,
Sridhar

Hi Sridhar,
Surely you can collect everything and transport it will not impact anything existing. Only if you have made some changes to the transformations in development that are not in quality, will be moved to quality.
Simple way to collect small objects is go to the change mode of the transformation it will ask you for transport request. Give the request number and it is ready for import in quality.
Hope this helps.
Regards,
Viren

Best method to transport changes from DEV to Prod Environment

Hi SDNers,
I have a requirement here :
I have made some changes to the DEV environment, which i want to move to the production Environment.
Changes mainly include the Structural changes, XSD's, Import maps, Remote systems, Export Maps, Validations etc. Please note that I DO NOT WANT to transport the data from DEV to Prod environment.
I can see 2 options available :
1. Export/Import Repository schema - But as far as i know, the import and export maps will not be transported auomatically through Export/Import Schema.
2. Archive/Unarchiving Without data -
Here are my questions :
1. Is the 2nd option feasible looking at the changes I need to transport? If yes, is there any recommended guide available by SAP suggesting the 2nd option for trnasport mechanism.( Please sendme the links)
2. Will it affect the data in Prodcution in any chance?
3. Is there anything Archiving/Unarchiving without data cannot handle.
4. Will it impact any other normal running of Production environment.
Please respond to my queries.
Thanks and Regards
Nitin Jain

Hi Nitin,
If you use Archive/UnArchive option without data then you cannot persists the PROD env since you need to UnArchive the entire repository which is empty and then you need to move the PROD data into this repository.
1. Is the 2nd option feasible looking at the changes I need to transport? If yes, is there any recommended guide available by SAP suggesting the 2nd option for trnasport mechanism.( Please sendme the links)
Ans. I don't think, 2nd option is feasible as a mentioned earlier. This option should be used when we need the entire repository without data which is not the case you are looking for.
2. Will it affect the data in Prodcution in any chance?
Ans. If you are using 2nd option then this question is not related because when you UnArchive, you will get the new repository so this wont affect the existing repository at all.
3. Is there anything Archiving/Unarchiving without data cannot handle.
Ans. Workflows
4. Will it impact any other normal running of Production environment.
Ans. If you are using 1st option then you need to unload the PROD repository first and then import the changes. For option 2 its not related.
Regards,
Jitesh Talreja

Transporting workflows from DEV to QA

Hi I have three queries.
1. When we transport wokflows from Dev to QA the agent assignment for tasks does not get transported. For eg. If we set a task as a general task in Dev, it does not get transported to QA. What do I do to ensure that the agent assignment and the task classification gets transported.
2. Also when we transport the workflow, if our workflow is triggered by events, the event linkage is inactive.(header data for the workflow template). How do I ensure that the event linkage stays active after we transport the WF to QA.
3. How do I transport organizations assignments to QA (transaction PPOM, PPOC stuff). It does not create a transport request when we create a new org. structure, positions, jobs etc.
Help would be appreciated.
Regards.

Vijay,
All the questions have been answered a few times on the SAP-WUG forum. You can search the forums using Google. Type
<b><u>Search Term(s ) site:http://mailman.mit.edu/pipermail/sap-wug</u></b> and hit the search button.
Come back if you still need help.
Also please note that Business Process Management is now designated as the forum for Workflow questions.
Cheers,
Ramki Maley .

How can I transport data from one client to another client?

How can I transport data from one client to another client?
Regards,
Subho

hmmm, CTS = cutomizing transport?
If you have a customizing table, there are still two possibilities.
1. customize in DEV system and transport
2. customize right there where you need it.
this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2.

Transport Error from Dev to QA.

Hi All,
We r facing transport error while transporting req from Dev to QA,
Created queries in dev and try to trasport in QA.
Error:
Execution of programs after import (XPRA)
Transport request   : BD1K922532
System              : BQ1
tp path             : tp
Version and release: 372.04.29 700
Execution of programs after import (XPRA)
End date and time : 20091022031634
Ended with return code: ===> 8 <==
what could be the reason?
Regards,
SD

Hi.
I have collected all neccessary object which query contains, but after releasing the request it shows the message,
The request contains message that have already been edited & transported to other projects. To avoid overshooter problem when importing you need to create dependency information for the request with which object were last transported. The requiered information is listed here together with the existing information.
Should i go ahed with above message???? Is there any dependency?
Regards,
SD

How to transport data from one tab to another(mapinfo)?

Hello all,
due to a change of design i have to transport datas from one
spatial table to another in order to use them in mapinfo.
How can i handle this with polygon datas?
if i just do a simple "insert into tab select * from anothertab;
all std datas are moved but the spatials generate errors while
opening in mapinfo (illegal data type) any ideas or suggestions?
Thanks i advance,
Volker I. Lipper

Hi,
just a guess - maybe the necessary metadata is missing. I suggest
you check the MAPINFO.MAPINFO_MAPCATALOG table for the
appropriate entry (for "anothertab"). If there is no
corresponding row, you need to make the table mappable in Mapinfo
Pro first.
Hope this helps,
--- Hans.

Transport data from Javascript file to BSP application

Hi,
How can we transport data from Javascript file that is stored in MIME repository to the BSP application that uses this Javascript?
To elaborate :
I have a BSP application which calls few functions from a Javascript file that is stored in the MIME repository. Now, i need to pass one of the values that is obtained dynamically in the Javascript function to the BSP application inorder to store it in DB.. How can I do this?
Thanks,
Vasuki

Hi,
you must only identify in which variable the javascript function stores the values. So you can enrich
your bsp application with such a function. Then you must transfer the value to a hidden input field.
This field content can be requested via request->get_form_field( 'name_of_the_field' ).
On the other side, check out, if ther is a getter function in this library.
Use firwefox with firbug plugin an set breakpoint in the javascript function to get an overview about the dom modcel.
Best regards, Stefan

Transporting data from Dev to quality using CMS

Similar Messages

Maybe you are looking for