Transporting SLD objects from DEV to PROD

Hi,
I need to move My SLD objects from DEV to PROD. There is no QA. Also SLD is not common across DEV and PROD.
Thanks!!
Regards,
Miten.

Hi,
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Regards,
Phani
Reward points if Helpful

Similar Messages

Transport SLDm repository, directory objects from Dev to Prod

Hi Forum,
I heve a development XI system and a production XI system,
and seperate SLD for each of them,
In development SLD i have created,
1 business system (third party)
1 product and software component
in Repository of Development XI,
i have a file to file scenario,
in directory of Development XI,
i have configured the scenario,
Now i want to transport everything (as explained above) from Development to Production XI system ....including SLD things ...
please tell me the procedure and sequence
Edited by: rana brata de on Jan 18, 2008 9:16 AM

Hi,
Check the links below for transporting the Objects from DEV to PRD.
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Regards,
Phani
Reward points if helpful

Transporting standard table from DEV to PROD

Hi All,
I have updated a table called T166K and T166P for Purchase Order Printouts.
I have entered few values in the above mentioned tables in DEV server.
Now, i would like to move these tables to Production, since i can not create values to these tables in Production server.
How to move tables from DEV till PROD...??
NOTE: While updating these tables, system didnt prompt for saving under Transport Request Numbers in DEV server.
Regards
Pavan

Hi,
You can use scatt tool to upload the data in the developement server. Prepare a file with data. Do it in developement environment only. then in SCATT you have remote logon facility using which you can run the scatt in developement environment and the result will be placed in the production server.
Let me know if you what more information on this.
Pls reward points if helpful
rgds,
Harikrishna

While transporting the objects from dev to q or production what are the err

Hi all,
While transporting the objects from one system to another what are the errors we get?
Thanks
Kiran Kumar

Hi Kiran,
The purpose of the Forums is to help people with problems, not to "fish" for answers to what appear to be interview questions. There are many ways to become educated in SAP Administration, such as training classes and help documetnation. Please choose these avenues for your questions instead of making these kind of posts in the Forums.
Best Regards,
Matt

OBJECT SKIPPED while transporting the objects from DEV to QA.

Hi All,
While transporting the objects to Quality, I'm getting a warning saying Objects are skipped.
Can anyone please explain how to get rid of this error? We are facing this issue almost for all the transports which we are moving and the objects do not get transported to the next environment. We have to ask BASIS to use overwrite functionality while transporting to fix this each and every time we face an error.
If any SAP notes are available then please share it to me.
Thanks in Advance.

Hi Srikanth,
Objects of the selected object types exist in your system as changeable even if this system is globally set to not changeable. As a result, these objects are no longer connected to the transport system.
check here........
http://help.sap.com/saphelp_nw04/helpdata/en/0e/a7343e8c7f6329e10000000a114084/content.htm
for this try contact basis team.
Thanks,
Vijay.

Transporting a workflow from DEV to Prod

Hi all expert,
thanks for your help in solving my issue .. that was awesome guys. Now I stuck with transporting the workflow that i have made from development system to production system. I have tried using regular transport request, and the workflow number exist but no active version available. So I cannot using it. Any suggestion on something that might have been forgotten?
thank you in advance for your help
regards,
david

Hi David,
I hope you configured the SWU3 in Production as well.
Then in Production check the syntax error in your workflow template using CTRL+F2.
During the transports, sometimes some containers may missing.
If there is no syntax error, then in Development create new version and activate the workflow again and do the transport again.
Before transport, do a buffer sync using transaction SWU_OBUF.
Thanks,
Viji.

Transport a char. from dev to prod

hi all,
i need to add a char. to a cube which has data, so i know i first need to delete the data in the cube and add the char.
when i transport that to qa, if the cube in qa has data, do i need to delete the data in the cube in qa, before transporting the char.?
thanks in advance

Hi BSK,
No need to delete data for adding a characteristic to a cube. You can just add the characteristic and send it to QA. No problem.
Hope it helps.
Thanks,
Soumya

Best method to transport changes from DEV to Prod Environment

Hi SDNers,
I have a requirement here :
I have made some changes to the DEV environment, which i want to move to the production Environment.
Changes mainly include the Structural changes, XSD's, Import maps, Remote systems, Export Maps, Validations etc. Please note that I DO NOT WANT to transport the data from DEV to Prod environment.
I can see 2 options available :
1. Export/Import Repository schema - But as far as i know, the import and export maps will not be transported auomatically through Export/Import Schema.
2. Archive/Unarchiving Without data -
Here are my questions :
1. Is the 2nd option feasible looking at the changes I need to transport? If yes, is there any recommended guide available by SAP suggesting the 2nd option for trnasport mechanism.( Please sendme the links)
2. Will it affect the data in Prodcution in any chance?
3. Is there anything Archiving/Unarchiving without data cannot handle.
4. Will it impact any other normal running of Production environment.
Please respond to my queries.
Thanks and Regards
Nitin Jain

Hi Nitin,
If you use Archive/UnArchive option without data then you cannot persists the PROD env since you need to UnArchive the entire repository which is empty and then you need to move the PROD data into this repository.
1. Is the 2nd option feasible looking at the changes I need to transport? If yes, is there any recommended guide available by SAP suggesting the 2nd option for trnasport mechanism.( Please sendme the links)
Ans. I don't think, 2nd option is feasible as a mentioned earlier. This option should be used when we need the entire repository without data which is not the case you are looking for.
2. Will it affect the data in Prodcution in any chance?
Ans. If you are using 2nd option then this question is not related because when you UnArchive, you will get the new repository so this wont affect the existing repository at all.
3. Is there anything Archiving/Unarchiving without data cannot handle.
Ans. Workflows
4. Will it impact any other normal running of Production environment.
Ans. If you are using 1st option then you need to unload the PROD repository first and then import the changes. For option 2 its not related.
Regards,
Jitesh Talreja

Checks to be done before moving the objects from DEvV to PROD systems

Hi,
Please provide the standard methods and checks to be done in the transport requests before moving the objects from DEv to PROD.
Please help us here.

In se10 find your request and
Upper left corner - Request\task -> Complete check -> Object (syntax check) and Check Request Consistency.
This you can do for your request and all the tasks included in your request.
Note: Transport may still fail due to numerous reason (i.e) not all the objects needed are collected in the request,
but at atleast it gives some assurance that objects are not blocked in other requests etc...

Error while transporting Data sources from DEV to Qual

System : SCM 5.0 (SP 8), BI 7.0 (SP 12)
1) We are trying to transport Data source objects from Development server to Quality server.
2) Data sources of Type R/3 and Web Service.
3) We are able to transport the objects from Dev.
4) Once we import the objects to Quality server, the objects are becoming into INACTIVE stage.
Please help... Thanx in advance..
Regards
Manoj

HI tanu,
could you let me know how you have solved this issue.
which object not active.
i am having the same issue now.
kris

Problems when transporting from DEV to PROD

Hi experts, I have problem during transport from DEV to Production.
We have a DEV, QAS and PRODUCTION and we have transport from DEV to QAS very well. But when we transport from DEV to PROD, recibe an error like:
After beginning the import method RS_IOBC_AFTER_IMPORT for Objects types IOBC mode (activation)
Failed to verify catalog InfoObjetos ZCM_UNIMET_CHA01
The InfoObjeto ZCM_RENC version does not exist in active
The InfoObjeto ZCM_RENM version does not exist in active
1.The Query is: Wy if the transport go OK from DE to QAS, then The transport from DEV to PROD terminated in error?.
2. There are any items to check in production before to transport?.
PD: All of the Objects in DEV are in ACTIVE status
Tanks,
Ramon Sulvaran

The transport ended in QAS with error code (4) and ended in Producion with error code (8), the detal of the error in Production begin with:
Home After import RS_ODSO_AFTER_IMPORT method for type (s) ODSO object (trigger mode)
Activation of DataStore objects of type Object
Check DataStore objects of type Object
DataStore Object Verification ZCM_DS01
The DataStore object is consistent ZCM_DS01
Burning the DataStore objects of type Object
Internal activation (DataStore Object)
Pretreatment / Creating DDIC objects to DataStore Object ZCM_DS01
Table / View / BIC/AZCM_DS0100 (type 0) DataStore object recorded ZCM_DS01
Create / Delete the indexes for the active table
Table / View / BIC/AZCM_DS0140 (type 4) recorded ZCM_DS01 DataStore object
Type of table / BIC/WAZCM_DS0100 recorded
Table / View / BIC/VZCM_DS012 (type VIEW) recorded ZCM_DS01 DataStore object
Log ZCM_DS01 DataStore object changes was recorded successfully
Writing Object Catalog entries (Tadiran)
He has written the object TABL / BIC/AZCM_DS0100 in catálgo objects (Tadiran)
He has written the object TABL / BIC/AZCM_DS0140 in catálgo objects (Tadiran)
He has written the object TABL / BIC/VZCM_DS012 in catálgo objects (Tadiran)
He has written the object TTYP / BIC/WAZCM_DS0100 in catálgo objects (Tadiran)
Activate all ABAP Dictionary objects (5):
Error / Warning in progr.activación Dict., Detailed log> Detail
Activate table / BIC/AZCM_DS0100.
Lack of expansion to the category table
Lack of extension category for include or subtype .......
When i go to BW Production to check teh object. I see tha the Object was create but in inactive status (grey color). When y Try to Actiavate it y see the error: Error/ Warning in program Activation Dcit. Detailed Log -> Detail

Unable to transport Integratin Builder objects from Dev to QA correctly

Hi,
System : Pi 711 SPS03
SLD 7.1 with latest model and content
We are trying to transport Integration Builder Objects from Dev to QAS, but the SID translation from DEV to QAS is not working.
The interface is being imported as the source SID.
We checked the SLD configuration for Transport targets, that is when we realised the below issue.
Unable to Assign Business Systems in respective Business System Groups
The expected configuration of the SLD is as below:
UKD_400 - Integration Server for Dev PI 711 server
INTEGRATION_SERVER_UKQ - Integration Server for QAS PI 711 server
XI_QA - Business System Group for all Quality Systems in the landscape
          1) UKD_400
          2) UC1_ECC_60
          3) UED_400
XI_DEV - Business System Group for all Developement Systems in the landscape
          1) INTEGRATION_SERVER_UKQ
          2) UC2_400
          3) UEQ_400
We are unable to put the business systems in their respective groups
All the Business systems are either being assigned in XI_QA or XI_DEV
Please let us know if this is a product error in SLD 7.1, could not find any relevant notes
Thanks,
Govind
Edited by: Govind Prathi on Feb 12, 2010 10:25 PM
Edited by: Govind Prathi on Feb 12, 2010 10:27 PM

We have already assinged the Integration server to their respective business system groups while creating the Business system groups.
   BSG: XI_DEV --> UKD_400( Integration Server DEV )
BSG : XI_QA ---> INTEGRATION_SERVER_UKQ( Integration Server QA)
As per documentation, the business systems should be automatically assigned to their respective Groups based on their association with Integration Server.
But, we are not seeing this behaviour, both the Integration servers are being assigned to the same Business System Group.
Please help me understand if i am something in the configurations.
Thanks
Govind

Transport from DEV to PROD BPC 7.5

Hi
i had a question of transporting AppSets from DEV to PROD System.
On the PROD Systems are no AppSets the PROD System is completly new.
Is it possible to transport the AppSets directly from the DEV to the PROD or must we first make a Backup in the DEV and an Restore in the PROD.
Thank you for your help.

Hi Carsten,
As far as i understand you need to transport application sets individually, from development to production. The object type ASET and APPM refer to an application set and application respectively.
As mentioned above, you can check and confirm from SAP Support if the back up mode ia now available to users.
Hope this helps.
Regards,
Poonam

Transport of XI Objects from Dev to Q system

Hi Experts,
I need the steps for moving the XI Object from Dev to Q system.
I have completed the devlopment of object and i need to move to Q system.
All the servers are maintained at London.
what should i give to Basis people inorder to move to Q system.
Thanks in Advance,
Bhaskar

Hi
You have three Options when considering transports between systems in XI:
1. File Method - Using the standard tools in XI IR and ID it is possible to export the content to a filesystem and following this import into another environment using the import functionality. The advantage of this is that it is easy to do and not implementation overhead. The disadvantage is that you do not have clear tracability (you xhould keep all exported packages on the server).
2. Using CMS - This uses the NWDI infrastructure to transport packages between environments. Only consider this option if you have NWDI in place in your environment otherwise in my opinion the overhead is too great. It only applies to Java Objects e.g. you cant transport for example ABAP Proxy classes using this methodology.
3. Use CTS+ or enhanced CTS - This allows Java Objects to be transported to by attaching Java Objects to transport requests. This is good if you are an ABAPer and familiar with the se09.se10 transactions. It does however have and implementation overhead and also you must first export the Objects from IR and ID first as per point 1.
I think in a low usage env point 1 is fine .. for an env with 100's of interfaces I would go for 3.
All the links I think are in earlier posts ..
Thanks
Damien

Error while Transport objects from DEv to QA-File transport

Hai Experts!
While exporting objects from Dev to Quality using File Transport. it taking long time and no erro msg is thown and it is not getting end .Did any face this problem. Can any one help me to solve this.
Regard's
Preethi.

Hai!
Issue is solved.
I try to export the Individual object -->Message mapping.
While exporting i unchecked the Option With software component version Defenition.
Now it is success. Thanks all replies.
Regard's
Preethi.

Transporting SLD objects from DEV to PROD

Similar Messages

Maybe you are looking for