Transports BI

Hello,
is it possibile to transport INFOOBJECTS, INFOAREAS and APPLICATION COMPONENTS all together in ONE TRANSPORT?
thank you!

Hi Magrit
Yes you can transport, but to have easy way of transporting without errors and to trace out easily to find all the objects are transported or not, you can do transport the App Comp and Infoareas in one transport and then your infoobjects in other
Regards

Similar Messages

  • Error while transporting a Workbook

    Hi Pioneers
                  I got an Error while transporting a Workbook from Development to quality.The error is "logical transport object 432L not found in table RSTLOGOPROP".     
        Could u let me out with a possible solution....Plz...
    BR
    Sekhar.D.R

    Hi,
    You have to create a new request and transport it again before transporting ensure that you collect all the dependent objects manually in the "Transport Connection" in the collection options.
    Hope this helps
    Assign points if useful
    Regards,
    venkat

  • Unable to capture the Data Source into a Transport Request

    Hi All,
    We have a product hierarchy and we are using the data source :4R_PRODH_D_LGEN_HIER for the hierarchy.
    Now we need to transport this structure to the quality environment but we were not able to capture the datasource:4R_PRODH_D_LGEN_HIER into a transport request.
    When ever we activate the data source:4R_PRODH_D_LGEN_HIER it is asking for the Package and the Transport Request Number.If we give these details and save it, data source is not getting captured in the request, only the "bject Directory Entry" is getting captured.
    Can someone please guide me on how to capture the datasource under "Data Sources in BW" in a transport request.
    Regards,
    Sachin Dehey.

    Hi Sachin,
    Hierarachy datasource is not captured as Attributes and Text Datasource. So what ever you have done is correct.
    What ever is captured in Object Directory Entry is correct. So go ahead with your transports, once transport is done check the Hierarchy Infopackage with Available OLTP hierarchies and load the data.
    Most important thing first see that the all Master & Transactional Datasources are transported in R/3 Dev to QA to PRD
    In BW, datasources are not transported, only their replica is transported.
    Transportation of Datasource is done in R/3. Only their replica is transported in BW.
    So wht ever you have done till now is correct. So go ahead.
    While attaching Hierarchy Datasource it is captured only in "Object Directory Entry"
    Regards,
    Vishnu.

  • Error while assigning objects to Transport Request

    Hi All,
    while  assigning a Transfromation to a Treq i am getting an error saying
    Object '7KU37C7IG3T7AQ5NHSLEZVC91' (ROUT) of type 'Routine' is not available in version 'A'
    Message no. RSO252
    Diagnosis
    You wanted to generate an object with the name '7KU37C7IG3T7AQ5NHSLEZVC91' (in transport request ROUT) of type 'Routine' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
    System Response
    The object was not taken into account in the next stage of processing.
    Kindly advice how to rectify this error

    Hi,
    You see the which infoobejct contains that routine and first collect that infoobejct and transport it then transport Transfromation. I hope you are missing some Routines while collecting the Transformations into request.
    See OSS Notes:
    Note 613581 - Transfer structure does not exist in version 'D'
    Note 508921 - P11:Content transfer:RSO 252 or RSO 296:InfoObject
    Note 1157873 - BI7.0(SP18) Message RSO 252 using transport connection
    Thanks
    Reddy

  • Error while transporting a data type

    Hello all SAP PI Experts,
    I'm trying to transport a data type but I'm getting the below mentioned error.
    This is happening even when I gave the proper name of SWCV that contains this data type.
    Please suggest how this problem can be solved.
    Thanks,
    Ajeya G V

    Hi Ajeya,
         An easy trick is to open the DataType on your Enterprise Service Builder, and once it is opened,  (not edit, just open) go to Tools --Export Design Object
    The correct SC will be filled as default.

  • Error while transporting TP in production server in workflow

    Dear All,
    I have done some workflows . It is working fine in development in quality but in production while TP transporting it is showing error like '  Temporary log /usr/sap/trans/tmp/TP number not found'. why this error is coming ?
    Please guide m . Its urgent.
    Regards ,
    Shital

    Shital,
    Do you transporting those requests into PRD as Developer?
    I think it is basis related issue, did you had any word with SAP basis person.
    Any ways could you send long text when it is giving this error.
    May be some sequencing issue in PRD?
    Cheers
    Jai

  • Error while transporting the cube

    Hi all,
    While I was transporting my cube from Development box to Acceptance box, following error occured.
       Execution of programs after import (XPRA)
       Transport request   : GCDK905220
       System              : NCA
       tp path             : /usr/sap/NCA/DVEBMGS01/exe/tp
       Version and release: 372.04.10 700
       Post-import methods for change/transport request: GCDK905220
          on the application server: bdhp4684
       Post-import method RS_AFTER_IMPORT started for CUBE L, date and time: 20080802045222
       Program terminated (job: RDDEXECL, no.: 04522200)
          See job log
       Execution of programs after import (XPRA)
       End date and time : 20080802045237
       Ended with return code:  ===> 12 <===
    Actually transport failed but the cube was present in the Acceptance box in inactive state
    Please help me for the same.
    With thanks and regards
    Mukul Singhal

    Hi Mukul,
    This is an RC=12 issue.Contact the basis team or raise ticket basis team stating that your specified transport request is got terminated.Basis team will resolve the issue and then you can Import the transport into your acceptance system.
    I hope it will help you.
    Regards
    Suresh B.G.

  • While transporting a role getting issue - Role type is undetermined

    Hi
    While trying to transport a single role getting the below error :
    Role type is undetermined.
    Can somebody help?
    Regards
    Saurabh

    Saurabh,
    I faced something pretty much similar and snote:: "770358 - PFCG: Role copy fails due to data inconsistency"  worked perfectly for me. 
    Snote describes quite nicely about the root cause.
    Please note this error might come up when you try to copy this role, perform pfud as wel.
    Thanks,
    Brahmeshwar

  • Error while transporting the Vendor in MM-SUS

    HI
    We are implementing SRM server 5.5 and follow a MM-sus scenario.
    We were able to transport the vendor to SUS via BD14.
    but now we are reciveing an error -
    An error occured within an XI interface: Exception occurredE:BBP_BUPA:060 -Error while trying to create contact person. Inform system administration Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</faultText>
      </standard>
      </nr1:StandardMessageFault>
    Can some throw light on this error.
    Previously when we transffered the vendor to SUS an user
    was getting created in su01 which is not getting created.
    2 When a vendor is transffered it creates a contact person "DO Not USE" why it that so ???
    regards,
    Nimish Sheth

    Hi,
       Did you see the note 807812?
    BR,
    Disha.
    Pls reward points for helpful answers.

  • Error while transporting req

    Hi,
    I have this strange problem. I have added some transformation , DTP , infopackage and routines to existing data flow.
    I have put them in a single request and tried to transport them to quality server.
    Now I am getting error while moving it to the quality.
    The error log says that one of the transformation has error in start routine. Where is that transformation doesn't exist in the system, not in active as well as inactive mode. I have checked in RSA1 as well as table 'RSTRAN'.
    Same problem with some of the DTPs as well. They are in error and they doesn't exist in the system( table RSBKDTP).
    Kindly help. Am I missing something.
    Regards
    Vivek

    Hi,
    I have narrowed the problem. I had 4 transformation in that req, Now I have separate req for each transformation. Out of 4 req 3 has been transported successfully. Now I am having trouble with a single transformation and cause of the error is piece of code in include which I am using in a start routines.
    LOOP AT source_package INTO ls_sourcepackage.
      ls_i_mat-fpc = ls_sourcepackage-/BIC/dpmat.  >> If I comment this line req get transported.
      APPEND ls_i_mat TO i_mat.
    ENDLOOP.
    /BIC/dpmat is fiield in the structure of source package.
    I am confuse why its giving trouble. The above transformation is from DataSource to Cube.
    Regards
    Vivek

  • Error while transporting

    Hi All,
    Iam working on BI7. I was transporting a DTP from Dev to Quality. The transport has failed with return code 8 and says 'Overlapping selection criteria with DTP'.
    Iam just not able to get through this....
    Pls help me out
    Thnx
    AP
    Edited by: AP on Dec 28, 2007 8:05 PM

    Hi Radek,
    No, there was no DTP with the same selection criteria.
    Any other suggestions??
    One more question...
    While Iam checking the log, the error is as follows
    DTPABC overlaps with selection criteria of DTPXYZ.
    DTPABC is which I transported from DEV.
    I don't understand where the DTPXYZ has come from...
    I've gone thru the Q but DTPXYZ is not to be seen anywhere...
    Does DTP tech names change after transport?
    Points will be assigned
    Rgds
    AP

  • Error while transporting request to Produc

    Hi Experts,
    m getting an error while i transport my request to production system.request successfully got transported into quality but in production its givind following message..
    "Temporary log
    sapbi\sapmnt\trans\tmp\RBDR903024.RBP not found"
    let me know about the cause of the error so that i can make the corrections.
    Thanks in adv.
    Bhavna.

    Hi Aasmi Gawas,
    Please could you post the error?
    We don't have a crystal ball to see the errors in your system...
    Best Regards,
    Erick ILarraza

  • Error while transporting webservice datasources

    Hi all,
    I have created webservice datasources to fetch EP data to BW. and now i am transporting that Datasources from DEV to QA. I have colllected datasources alone in one req. (source system i have created in QA manually and i mapped that with DEV)
    But while transporting i am getting the folllowing error,
    3S3T   Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)  
    Error  Screen output without connection to user .                                                                               
    Error when activating DataSource ZANS_MASTER BI7001                                                                               
    Please through some light is there any predefined settings i need to do in QA system?.
    Thanks in advance,
    V.Sen

    Dear All,
    Thanks for your kind reply.
    There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
    Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
    But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
    Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
    Let me know if I have not understood correctly.
    Many thanks again for your efforts.
    /Shalabh

  • Error while transporting infospoke with BADI in BW7.0

    Hi:
    We have an infospoke with Transformation ( ie with BADI) in BI7.0.
    While transporting to Quality box it gives error.
    "Transfer structure /BIC/CZZTXXXXX3 could not be generated
    Error when activating InfoSpoke ZTXXXXX3.
    Message no. RSOH010 "
    Could you please help in rectifying the error.
    PS: we tried transporting BADI first and then the infosoke but still its failing.
    Regards!
    Saniya

    Hi
    Check the forum link below
    Transport Problems with Spokes that have BADIs
    Thanks

  • Error while transporting the request from quality to production of BI

    Dear all,
    When transporting a request (which contains elements of correction - in Bex designer) from quality to production of BI the following error is displayed and the request transport fails. Can the experts throw some light on this.
               Execution of programs after import (XPRA)
               Transport request   : RBDK904992
               System              : RBP
               tp path             : tp
               Version and release: 372.04.04 700
               Post-import methods for change/transport request: RBDK904992
               Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20080406140407
               Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
               Error when activating element EY2CXLKXP5X5AY0RQ2XKN9EX8
               Element 5E4II2344I3JG4R6ACMYQ441Z is missing in version M
               Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
               Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
               The errors affect the following components:
                 BW-WHM (Warehouse Management)
               Post-import methods of change/transport request RBDK904992 completed
                   Start of subsequent processing ... 20080406140407
                   End of subsequent processing... 20080406140408
               Execute reports for change/transport request: RBDK904992
               Reports for change/transport request RBDK904992 have been executed
                   Start of................ 20080406140408
                   End of.................. 20080406140408
               Execution of programs after import (XPRA)
               End date and time : 20080406140408
               Ended with return code:  ===> 8 <===
    Thanks in advance.
    Regards,
    M.M

    Hi,
    First try to figure out the object type from the text obtained by following steps above.
    Goto Development server ,create fresh request (using transport connection) , transport to QA and then in to production.
    After successful transfer of the request for this object ,try to reimport the request which caused error and it should go smoothly without any error.
    Hope it helps.
    Regards
    Mr Kapadia

  • Error while transporting the transfermactions

    hi,
    i am transporting transformations dev to qty. while transporting i am getting error msg:
    1) No Rules exists.
    Transformation : Rules  1 could not be  imported.
    Transformation : Rules  2 could not be  imported.
    Transformation : Rules  3 could not be  imported.
    No fields were supplied.

    Hi Shilpa Reddy
    Just a quick spot it may be because of incorrect transport collection or multi modifications of transformation under a single transport .
    Just replicate the data source in Target system RSA1>Source System>DS right click replicate .
    and create a new transport in development system by reactivating the transformations and then release it in SE01 and then go to the Target system and go for STMS import it.
    Small Note have you mapped all the info objects ,have imported the specified info objects into your target system if not then please do it and then import the transformation request.
    Hope its clear a little..!
    Thanks
    (P159793)K M R
    **Assigning points is the only way of saying thanks in SDN***
    >
    shilpa  Reddy wrote:
    > hi,
    >
    >
    > i am transporting transformations dev to qty. while transporting i am getting error msg:
    >
    > 1) No Rules exists.
    >  Transformation : Rules  1 could not be  imported.
    >  Transformation : Rules  2 could not be  imported.
    >  Transformation : Rules  3 could not be  imported.
    >
    >
    > No fields were supplied.
    Edited by: P159793 on Dec 30, 2008 4:55 PM

Maybe you are looking for