Transports status "Import Running" truck icon

I am using TMS_TP_IMPORT. The import queue status is always "Import is running"...but when I click on the Job says successful.
How do get rid of this "Import is running" error in STMS

go to STMS, double click on the SID
u will see truck icon there
Right click on it and say delete entry
If this does not solve the problem,  than make sure no import is running in the system, then delete enteries from
trbat, trjob, TMSTLOCKP, TMSTLOCKR and last few enteries from tpstat

Similar Messages

  • Import status- import running does not change during the mass import of TR

    Dear All,
    I have successfully imported single requests in my newly installed SAP ECC EHP4 PRD system but when I have tried to import 8 transport requests(Mass Import) then the Import status is not changing from import running (Truck button still appears).
    But the effect of the request is seen in the production system but the status does not change.
    I have checked the logs and found that all the requests have been imported successfully but the Truck status does not change.
    I have restated the system but no use still the same.
    Thanks in Advance...

    Import Running for a long time on ECC 6.0
    The background job RDDIMPDP is running on client 000 as well as the relevant client.
    Below is the TP System Log:
    WARNING: System CC6. Warning. 20090914042136 :
    WARNING: Background job not running properly. Function: G Jobcount: 04512801 Status: S.
    Please check the system. Use transactions SM21, SM37, SM50.
    WARNING: (This warning is harmless if no further warnings follow.)
    As per NOTE: 26966, it could be b'cause the background job process slots are occupied,
    Vikas Nagar

  • Unable to Import Transport Request - hanged with Truck icon

    Dear SAP Expert,
    Our DEV & QAS are on normal domain installation but Production installation is on HA Cluster on Windows.
    We have configured the STMS for the CRM landscape system and domain is Development server.  While trying to import all the Transport Request, it is getting hanged and showing in import running status (showing Truck icon). 
    We have checked some possible logs and reviewed the complete STMS configuration, profiles and process and found the BG job RDDIMPDP is not getting scheduled continuously. 
    The below error is from latest log file u201CSLOG1151.PCRu201D from F:\usr\sap\trans\log (global directory) from Production server for your review
    WARNING: System PCR. Warning.        20111220144048 :
    ERROR:       The following call returned with exit code 7:
    ERROR:         sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=PCR pf=
    ERROR:       Background jobs cannot be started.
    ERROR:       Please check trace file dev_evt.
    WARNING:       (This warning is harmless if no further warnings follow.)
    I would request, please help me for resolving this issue immediately as our GO-LIVE date is nearby and have to import all the TRs from CRM QAS to this PRD servers.
    Kindly let me know, if you need any further information.
    Thanking you,
    Devki Nandan

    This forum is for SAP application called as 'SAP Transportation Management'. Your query is irrelevant to this forum. Please look for an appropriate forum to post your query.
    Nageshwara Manda

  • STMS problem ( import status - import runnig does not change)

    I have the same problem like this:
    While Transporting request in our production server the status of request from import running (truck sign) does not change.
    But the effect of the request is seen in the production but status does not change.
    see :Re: STMS problem ( import status - import runnig does not change)
    I did se14 as experts suggested, the history truck sign go away,seem work fine,
    but when new request need STMS to trans, the truck sign happened again,
    I need you help,thank you!

    thanks for all reply,
    the last two answers are the same,I think this is the right key,
    I'm a ABAPer actually,yesterday I asked our headquarters  basis to help,
    and I don't know what he did,now this problem is be solved,
    PS:I use AL11 to find .LOB now,but not find(maybe it's deleted by our basis),
    thanks again!

  • Transport Request in PRD is in the IMPORT RUNNING status..

    Hello Experts,
    I have a problem while i m importing the request in PRD,the request is in the state of IMPORT RUNNING.
    While i have imported the same request in the other systems DEV and QAS successfully.
    I have seen the RDDIMPDP in sm37 it is getting cancelled. Then in 000 client i have runned the job RDDNEWPP with the DDIC user. And did the same in the PRD Live Clinet.
    I have also triggered it in sm64 and then checked the job in sm37 the job is finished successfully but the request is still in the same state.
    I have checked the consistency its all ok.
    One of the request suddednly got imported and rest are still in the same Import Running state.
    Now this made me curious if one got imported then why not other requests getting imported.
    All the other requests are imported successfully in DEV and QAS successfully.
    A couple of days ago i have made the changes to the Live Client in PRD for some requirment then i have revert back the changes to the non modifiable state. Does it have any effect on the transports. Because i have been facing this problem after the changes of the PRD Live Client.
    Please i would appreciate if anyone can help me giving the proper solution.
    Mudassir Imtiaz.

    Hello Anindya.
    Thanks for your quick help. I have removed the entries from the table TRBAT and imported and it was successfully done.
    Now the problem is for each transport request i have to see the job RDDIMPDP and schedule it because its getting cancelled and for each transport request i have delete the entries from TRBAT table. Can you tell me something by which i dont have to go delete the entries from the table TRBAT every time. And i still wonder why the job RDDIMPDP is getting cancelled. I have also scheduled RDDNEWPP in Client 000 with DDIC and still the same problem.
    Another thing which i have noticed in sm21 is the job (RDDIMPDP) is getting scheduled in Application server but i have scheduled in DB server. Every  time i have to schedule the job from sm36 give the DB server in Exec. Server and execute.
    Thanks for your response.
    Mudassir Imtiaz.

  • Transport set import status is always = "MERGE" ...?

    My transport set import status is always = "MERGE" in Portal and I cannot delete this transport set.
    What should I do ?
    Thanks for your help,
    Best Regards,
    Jean-Christophe AUDARD

    The transport set status is MERGE when the import job has not been submitted to background. You might want to check your job_queue_processes parameter. The way to do this is
    In SQL*Plus, simply perform the following query:
    select name, value from v$parameter where name='job_queue_processes'
    The value for job_queue_processes should be at least 2 to allow the execution of background jobs.
    An alternative way of checking the job_queue_processes parameter is to simply examine the init.ora file in your database's ORACLE_HOME.

  • How to unhide "Truck" icon in SC Status screen?

    Could someone show me the steps to unhide the "Truck" icon in the SC Status screen? I don't know which method my former colleague used to hide the icon (screen variant or HTML template), but now I need to unhide it so we can do confirmation from this screen. I'm not familiar with either method and I now have to hunt for it and unhide it.
    Many thanks.

    Hi SN,
    Go to internet service 'BBPSEARCH'
    In this service go to html template 'SAPLBBP_PDH_SEARCH 4001' and search for term 'Auto CF'. Check whether this is commented, if so uncomment it and you will be able to see the truck icon in the SC status search screen.
    Let me know this was helpful.
    Reward points for useful answer.

  • Import Running in STMS

    Dear All,
    i transported a request from QAS to PRD and it was showing (Import Running ,showing Truck)  for 2 hours .So, I deleted it and made new transport request from consultant When i import it then it also showed Import Running. After it i transported more request but all transport requests are showing Import Running from 2 hours in STMS.
    what should i do for this issue?

    Hi Ashok,
    thanks for reply,
    fyi, the transport request successfully imported from DEV100 to QAS400 but not on PRD600.
    when i execute
    Goto sm37->jobname RDDIMPDP and user DDIC with selection criteria status released.
    result is: No job matches the selection criteria
    schedule the job by running the program RDDNEWPP with t-code se38 in client 000.
    when i click on Normal table for scheduling then i get:
    Error scheduling background job
    RDDIMPDP_CLIENT_ 600 in 600
    I have already deleted those transport requests which were showing Import Running in STMS from 2 hour.
    after this when i transported the new requests then i faced that truck mean Import Running from 1 hour.

  • IMPORT RUNNING since long days

    I am importing the Language which didn't finish yet and small truck icon still showing which means that import is running ...
    Anwer Waseem

    Hello Anwer,
    Before taking any actions check for entries in 'TPSYSLOG'
    That will give you a perfect hint about the long running transport.
    Secondly, check the tp process at OS level, if it is active. (check file <SID>.LOB also)
    Thirdly, check for 'extents' for all tablespaces.
    Hope it helps
    Ammey Kesarkar

  • :-)   How to schedule the TMS Job ? ( I don't have the "orange truck" icon)

    Hi All,
    In the STMS txn, I'd like to shedule the TMS import job, but :
    1- I'don't have the truck icon.
    2- On which environement do u shedule it ( source or target ? )
    Thx a lot,

    Check the below link to enable/disable Import all option in STMS.

  • Import running for over a week

    hi friends
    I need to customize XSS business packages using NWDS. I installed JDI and created tracks in CMS. I was able to check in all the required files but when i am trying to import those files, i am not able to import ESS and MSS files. all other files have been imported successfully but for these two files, it is showing import running for over a week now. Has anyone faced a similar situation before? kindly respond if u have the solution.
    with thanks

    I am able to import the ESS file in CMS but I am getting problem in CBS.
    In my case ESS import took 22hours and I got communication error and we restarted the server and I click on the import button, in this time, the import is finished on CMS and I am getting problem in CBS.
    This is the error message, I am getting,
    Please give me some ideas, what to do.
    Info:Starting Step CBS-make at 2006-09-13 11:23:14.0020 -7:00
    Info:wait until CBS queue of buildspace DI1_XSSSP6_D is completely processed, before starting the import
    Info:waiting for CBS queue activity
    Error:CBS error on activation:
    caused by:CBS Server Error: CBS failed to communicate with some other server( internal code: COMMUNICATION_ERROR) CBS Server Error: CBS failed to communicate with some other server( internal code: COMMUNICATION_ERROR)
         at javax.servlet.http.HttpServlet.service(
         at javax.servlet.http.HttpServlet.service(
         at Method)
    Info:CBS server trace: HTTP protocol error [reason: Parsing of the response body failed [reason:

  • Exchange Connector 3.0 status Never Run

    I've setup lab enviroment of SCSM 2012 SP1 following the instructions:
    Everything works fine with an exception of Exchange Connector. It is stuck in status: Never Run
    I was able to configure the connector with out error. I checked the event logs and it showed success
    of all the config items and even showed it connected to an email that I sent to the workflow mailbox:
    Log Name:      Operations Manager
    Source:        Exchange Connector
    Date:          7/28/2014 11:52:00 AM
    Event ID:      0
    Task Category: None
    Level:         Information
    Keywords:      Classic
    User:          N/A
    Computer:      GENINGSCSMT01.CORP.IGES.SI
    Exchange Connector: Attempting to connect to Exchange with the settings: login email address="[email protected]", impersonation email address="none", server URL="" 
    Event Xml:
    <Event xmlns="">
        <Provider Name="Exchange Connector" />
        <EventID Qualifiers="0">0</EventID>
        <TimeCreated SystemTime="2014-07-28T09:52:00.000000000Z" />
        <Channel>Operations Manager</Channel>
        <Security />
        <Data>Exchange Connector: Attempting to connect to Exchange with the settings: login email address="[email protected]", impersonation email address="none", server URL="...................................................................."
    - Exchange Connector: Exchange web service tracing enabled.
    - Exchange Connector: Using Exchange Web Service URL:.....................
    EwsRequestHttpHeaders: <Trace Tag="EwsRequestHttpHeaders" Tid="1" Time="2014-07-28 09:52:00Z">
    POST /EWS/Exchange.asmx HTTP/1.1
    Content-Type: text/xml; charset=utf-8
    Accept: text/xml
    User-Agent: ExchangeServicesClient/14.03.0032.000
    Accept-Encoding: gzip,deflate
    EwsRequest: <Trace Tag="EwsRequest" Tid="1" Time="2014-07-28 09:52:00Z" Version="14.03.0032.000">
      <?xml version="1.0" encoding="utf-8"?>
      <soap:Envelope xmlns:xsi="" xmlns:m="" xmlns:t="" xmlns:soap="">
          <t:RequestServerVersion Version="Exchange2007_SP1" />
            <t:TimeZoneDefinition Id="Central Europe Standard Time" />
          <m:FindItem Traversal="Shallow">
            <m:IndexedPageItemView MaxEntriesReturned="1" Offset="0" BasePoint="Beginning" />
                  <t:FieldURI FieldURI="message:IsRead" />
                    <t:Constant Value="false" />
                  <t:FieldURI FieldURI="item:ItemClass" />
                    <t:Constant Value="IPM.Note" />
              <t:DistinguishedFolderId Id="inbox" />
    EwsResponseHttpHeaders: <Trace Tag="EwsResponseHttpHeaders" Tid="1" Time="2014-07-28 09:52:00Z">
    200 OK
    Transfer-Encoding: chunked
    Content-Encoding: gzip
    Vary: Accept-Encoding
    Persistent-Auth: true
    Cache-Control: private
    Content-Type: text/xml; charset=utf-8
    Date: Mon, 28 Jul 2014 09:52:00 GMT
    Server: Microsoft-IIS/7.5
    X-AspNet-Version: 2.0.50727
    X-Powered-By: ASP.NET
    EwsResponse: <Trace Tag="EwsResponse" Tid="1" Time="2014-07-28 09:52:00Z" Version="14.03.0032.000">
      <?xml version="1.0" encoding="utf-8"?>
      <s:Envelope xmlns:s="">
          <h:ServerVersionInfo MajorVersion="14" MinorVersion="2" MajorBuildNumber="347" MinorBuildNumber="0" Version="Exchange2010_SP2" xmlns:h=""
    xmlns="" xmlns:xsi="" xmlns:xsd="" />
        <s:Body xmlns:xsi="" xmlns:xsd="">
          <m:FindItemResponse xmlns:m="" xmlns:t="">
              <m:FindItemResponseMessage ResponseClass="Success">
                <m:RootFolder IndexedPagingOffset="1" TotalItemsInView="2" IncludesLastItemInRange="false">
                      <t:ItemId Id="AAMkAGY0NWM1MDJlLWNlYzctNDUwMy04NjUyLWZmNmJhODZmZWFjNwBGAAAAAABEWg/FMFIlQ6snViUYxTCgBwCX9G6oX6gvSK4RK8YlCtwaAAAApoPnAACX9G6oX6gvSK4RK8YlCtwaAAAApqtHAAA=" ChangeKey="CQAAABYAAACX9G6oX6gvSK4RK8YlCtwaAAAApwJt"
                      <t:ParentFolderId Id="AAMkAGY0NWM1MDJlLWNlYzctNDUwMy04NjUyLWZmNmJhODZmZWFjNwAuAAAAAABEWg/FMFIlQ6snViUYxTCgAQCX9G6oX6gvSK4RK8YlCtwaAAAApoPnAAA=" ChangeKey="AQAAAA==" />
    Test 2</t:Subject>
                      <t:DisplayCc />
                      <t:DisplayTo>Test Scsm</t:DisplayTo>
                      <t:LastModifiedName>Gorazd Lenko</t:LastModifiedName>
                          <t:Name>Gorazd Lenko</t:Name>
                          <t:Name>Gorazd Lenko</t:Name>
                      <t:InternetMessageId>&lt;[email protected]&gt;</t:InternetMessageId>
                          <t:Name>Test Scsm</t:Name>
                          <t:Name>Test Scsm</t:Name>
    As you can see from the last event (bold letters) the Workflow account manages to get to the Exchange account, reads the inbox, but it isn't able to poll the message to SM. 
    Any ideas guys?

    It was set to Default Incident Template. I have created a new Incident template and recreated Exchange Connector, but the issue is still present. Workflow account is a member of SCSM Admin role, Workflow role and a local admin on the server. It is also Sysadmin
    on the database.
    On the Exchange server I have also ran Get_MailboxStatistics command and the output:
    [PS] C:\Windows\system32>Get-MailboxStatistics  | select lastlog* | fl
    cmdlet Get-MailboxStatistics at command pipeline position 1
    Supply values for the following parameters:
    Identity: testscsm
    LastLoggedOnUserAccount : CORP\testscsm
    LastLogoffTime          :  31.7.2014 7:45:14
    LastLogonTime           : 31.7.2014 7:39:58
    So that means that the a
    ccount logs in to mailbox but is unable to process emails.
    Also I have found the difference in the EWSLogEntry on the test and production server:
    The production log says:
    <m:IndexedPageItemView MaxEntriesReturned="2147483647" Offset="0" BasePoint="Beginning" />
    and the test log:
    <m:IndexedPageItemView MaxEntriesReturned="1"
    Offset="0" BasePoint="Beginning" />
    Is there any way I can edit those settings?

  • Import running

    Hi Gurus,
    I have created a product and  a software component and defined the usage dependencies in the SLD.
    I have created a domain, and a track for the software component. I also defined the required software components in the CMS. I have performed the activity "Import" of the required software components (SAP_BULDIT, SAP_JEE, SAP_JTECHS). After a long time, the status for these components changes to "Import Running".
    The question is "Import Running" means the three compoents (SAP_BULDIT, SAP_JEE, SAP_JTECHS) are imported into the configured "Run Time System".
    can the development configuration for the track can be imported into the NetWeaver Developer Studio with the status as "Import Running"?.
    I appreaciate your help!

    Hi Vineeth,
    Thanks for the link. However, I am working on Sneak Preview version (NW04 SP16). I have followed the guide<a href="">Post Installation Guide for Sneak Preview NW04 SP15</a> to configure NWDI.  I was unable to redeploy DTR as mentioned in the step 3:
    <b>Open the SCA file “SAPDEVINF11_0.SCA” under
    Weaver_04_SR_1_Java_DVDJ2EE_OSINDEPJDIONLINE with WinZip or
    WinRAR and extract the sda file “sap.comtcdtr~dbschema.sda“.
    (Note, that there are installation instructions regarding this folder).</b>
    I did not find the file <b>sap.comtcdtr~dbschema.sda</b> in the folder. I maintained the rest clearly.
    Still, the SAP-JEE component status is "Import Running". The status for other components is "Import Failed". I have maintained the heap size as mentioned (512 MB) also.
    Please help me to get rid of this error for sneak preview.
    Siribabu G.

  • Transport Studio import takes a lot of time...Please help

    Hello All,
    Using the Tranport Studio when I import the 3 .sca files into Development, it takes a lot of time from the 'Import Running' status to change to 'Import Finished' status
    This period varies between 20 mins or 30 mins or 2 hrs as well.....
    1. What is the ideal or acepted time for such an execution?
    2. What can I do to make this process a little faster?
    3. At times when I check the details one import process failes....Why is this?
    Awaiting Reply.
    Thanks & Warm Regards,

    Hi Ritu,
    1. That heavily depends on what you do, i.e. what is contained in the SCAs and what already exists in your track.
    As you can see from the details importing an SCA means you import sources into DTR (if the SCA contains sources), then everything is built and finally deployed (if there is a runtime system).
    Import into DTR can involve some heavy database operations. This step alone may take a few hours (e.g. SAP_ESS). Building depends on how much is changed and what was imported. If you import SAP_BUILDT usually everything is rebuild. If you import an SCA from another development track maybe only a few DCs are built. And then some DC builds only take a few seconds while others require several minutes (e.g. those tra/tre/tr* components in ESS.)
    2. Optimize DTR & CBS performance. Check database for performance bottlenecks, put CBS temporary build space on a fast harddisk, make sure the threadPoolSize fits your hardware, etc.
    3. You mean the import fails because you check details? I somehow doubt that, but I've seen in the past that the CMS request "fails" because of a timeout while CBS is still busy building things. I consider that a bug in CMS, but you have to restart the import to get deployment...
    Can you elaborate what you mean?

  • Importing "Run and Build Application"

    I've been trying to duplicate my Oracle workspace applications on my local machine. It worked fine for one of my apps, but the second one failed. I exported the file several times in DOS format with Unicode UTF-8, Build Status Override "Run and Build Application", and other fields blank. I imported successfully on my machine, and got to the "Application Install" screen. But the routine then failed with the message:
    ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 6, column 7: PLS-00103: Encountered the symbol "¿¿¿¿¿¿¿¿4¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿¿" when expecting one of the following: ( - + case mod new null avg count current max min prior sql stddev sum variance execute forall merge time timestamp interval date
    When I tried to importing the same file back to the Oracle workspace (to create a backup copy so I could further develop without risk) it also failed at the same point with this message:
    ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 6, column 7: PLS-00103: Encountered the symbol "&#17498;&#8259;&#25932;&#30305;&#14949;&#21280;&#27749;&#25445;&#8308;&#28257;&#25888;&#28781;&#28524;&#25977;&#8293;&#28257;&#8292;&#27747;&#25449;&#8299;&#16930;&#26784;when expecting one of the following: ( - + case mod new null avg count current max min prior sql stddev sum variance execute forall merge time timestamp interval date
    Any ideas?

    Here is the output from the NLS query:
    Here is the output from the procedure in the other thread:
    nls_language = {AMERICAN}
    nls_territory = {AMERICA}
    nls_characterset = {WE8MSWIN1252}
    add this line to your DAD config:
    How (or where) do I add this line to my DAD?

Maybe you are looking for