Trash not displaying any images

I saw the same issue elsewhere on this forum but I can't find the thread now. But I have deleted 221 images in A3 which are now sitting in my Aperture Trash. When I click on the trash it doesn't show any images. I can right click and empty the trash but say i want to restore an image I can't as I can't see them. In the filter at the top right i have Show All so there is nothing filtered.
Does anyone have any suggestions as to what the issue may be. I'm guessing it is a setting of sorts that maybe I have overlooked as opposed to a bug but any thoughts would be appreciated.
Regards

Just a question on this. Does anyone know if when you delete an image in A3 whether it actually moves the image or whether it just tags it as deleted and the Trash is effectively a smart folder looking for any images that are tagged trash. Then when you empty the trash Aperture actually then takes these marked images and trashes them? (Does Aperture at this point permanently delete the image or send it to the computers trash where it can in theory be recovered?).
The reason I ask is because if the former is correct it might make sense with regard to some other activity I have seen with A3. As my understanding is that with the smart albums they should update automatically and instantly? So if I have a smart album looking for the keyword landscape say and I tag a new photo as landscape it should instantly appear in the smart album? As at times I have had to go in to the smart album untick the keyword look up 'landscape' and then re tick it again to get A3 to show the newly tagged photos.
So it could be that I am somehow having an issue related to this. Additionally I have an album that aperture shows as having say 23 images in but when clicking in to the album there are in fact only 22 images (with all stacks expanded).
It doesn't seem that anyone else is seeing these issues so I wonder if it is an Aperture database issue or an Aperture software issue and whether reinstalling A3 may resolve whatever issues I have? However this will lose all my settings I suspect?
If anyone has any knowledge or ideas then please let me know. Thanks.

Similar Messages

Aperture 3 project does not display any images in one Project

This is a strange situation. The bullets below outline the situation:
The project does not display any images
When I place the pointer over the project it shows there are 500+ images
I have located the RAW images stored in my aperture library
I can pull up the images using a smart folder and searching for photos taken on the event day
This is happening only to one of my projects that I know of (weird!!)
I have tried to 're-add' the image by both importing and dragging and dropping into the project, neither works
I tried the following basics:
Fixed permissions
Rebuilt the database
Tried to re-import the data, but when I have the 'don't import duplicates' these are not an option
Found the images in my Aperture library
I created another project and drug all of the images into that project
Any idea how I can fix this?
My fear is that if I delete the original project, the original master images will be deleted.

The most common cause of this is some sort of stuff in the search box at the top of the browser that you don't expect to be there. Just clear it and all your images should show up.
RB
One note - if you drug your images from one project to another it moves them vs copies them unless you hold down the option key.

My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error.

My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error. I'm not sure why neither is working, it just suddenly happened. I have done nothing different.

Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands.

Dreamweaver does not link any images or styling to my webpage

Hi,
I have been creating a webpage and have moved images from one folder to another and now the website will not display any images or styling. I have moved all the content back and it still doesn't show. I have created a completely new website with new images and styling and even now it still doesn't link the images to the "live view" (or when I open it in a browser). What have I messed up?
Thanks in advance.
Tom.

Thanks for you quick response - Please note that even if I use a template it doesn't show any image I put in. Can you see a problem with this template code? I have put the HTML and then the CSS after
PLEASE ALSO NOTE: I have completely re-done site management and moved images to where they should be. This has not worked.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<title>Untitled Document</title>



<link href="file:///C|/Users/admin/Desktop/tomstinhouse/twoColElsRtHdr.css" rel="stylesheet" type="text/css" />
</head>
<body class="twoColElsRtHdr">
<div id="container">
<div id="header">
    <h1>Header</h1>
</div>
<div id="sidebar1">
    <h3>sidebar1 Content</h3>
    <p>The background color on this div will only show for the length of the content. If you'd like a dividing line instead, place a border on the right side of the #mainContent div if the #mainContent div will always contain more content than the #sidebar1 div. </p>
    <p>Donec eu mi sed turpis feugiat feugiat. Integer turpis arcu, pellentesque eget, cursus et, fermentum ut, sapien. </p>
</div>
<div id="mainContent">
    <h1> Main Content </h1>
    <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Praesent aliquam, justo convallis luctus rutrum, erat nulla fermentum diam, at nonummy quam ante ac quam. Maecenas urna purus, fermentum id, molestie in, commodo porttitor, felis. Nam blandit quam ut lacus. </p>
    <p>Quisque ornare risus quis ligula. Phasellus tristique purus a augue condimentum adipiscing. Aenean sagittis. Etiam leo pede, rhoncus venenatis, tristique in, vulputate at, odio. Donec et ipsum et sapien vehicula nonummy. Suspendisse potenti. Fusce varius urna id quam. Sed neque mi, varius eget, tincidunt nec, suscipit id, libero. In eget purus. Vestibulum ut nisl. Donec eu mi sed turpis feugiat feugiat. Integer turpis arcu, pellentesque eget, cursus et, fermentum ut, sapien. Fusce metus mi, eleifend sollicitudin, molestie id, varius et, nibh. Donec nec libero.</p>
    <h2>H2 level heading </h2>
    <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Praesent aliquam, justo convallis luctus rutrum, erat nulla fermentum diam, at nonummy quam ante ac quam. Maecenas urna purus, fermentum id, molestie in, commodo porttitor, felis. Nam blandit quam ut lacus. Quisque ornare risus quis ligula. Phasellus tristique purus a augue condimentum adipiscing. Aenean sagittis. Etiam leo pede, rhoncus venenatis, tristique in, vulputate at, odio.</p>
</div>
<br class="clearfloat" />
   <div id="footer">
    <p>Footer</p>
</div>
</div>
</body>
</html>
@charset "utf-8";
body {
font: 100% Verdana, Arial, Helvetica, sans-serif;
background: #666666;
margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
padding: 0;
text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
color: #000000;
/* Tips for Elastic layouts
1. Since the elastic layouts overall sizing is based on the user's default fonts size, they are more unpredictable. Used correctly, they are also more accessible for those that need larger fonts size since the line length remains proportionate.
2. Sizing of divs in this layout are based on the 100% font size in the body element. If you decrease the text size overall by using a font-size: 80% on the body element or the #container, remember that the entire layout will downsize proportionately. You may want to increase the widths of the various divs to compensate for this.
3. If font sizing is changed in differing amounts on each div instead of on the overall design (ie: #sidebar1 is given a 70% font size and #mainContent is given an 85% font size), this will proportionately change each of the divs overall size. You may want to adjust based on your final font sizing.
.twoColElsRtHdr #container {
width: 46em; /* this width will create a container that will fit in an 800px browser window if text is left at browser default font sizes */
background: #FFFFFF;
margin: 0 auto; /* the auto margins (in conjunction with a width) center the page */
border: 1px solid #000000;
text-align: left; /* this overrides the text-align: center on the body element. */
.twoColElsRtHdr #header {
background: #DDDDDD;
padding: 0 10px; /* this padding matches the left alignment of the elements in the divs that appear beneath it. If an image is used in the #header instead of text, you may want to remove the padding. */
.twoColElsRtHdr #header h1 {
margin: 0; /* zeroing the margin of the last element in the #header div will avoid margin collapse - an unexplainable space between divs. If the div has a border around it, this is not necessary as that also avoids the margin collapse */
padding: 10px 0; /* using padding instead of margin will allow you to keep the element away from the edges of the div */
/* Tips for sidebar1:
1. Be aware that if you set a font-size value on this div, the overall width of the div will be adjusted accordingly.
2. Since we are working in ems, it's best not to use padding on the sidebar itself. It will be added to the width for standards compliant browsers creating an unknown actual width.
3. Space between the side of the div and the elements within it can be created by placing a left and right margin on those elements as seen in the ".twoColElsRtHdr #sidebar1 p" rule.
.twoColElsRtHdr #sidebar1 {
float: right;
width: 12em; /* since this element is floated, a width must be given */
background: #EBEBEB; /* the background color will be displayed for the length of the content in the column, but no further */
padding: 15px 0; /* top and bottom padding create visual space within this div */
.twoColElsRtHdr #sidebar1 h3, .twoColElsRtHdr #sidebar1 p {
margin-left: 10px; /* the left and right margin should be given to every element that will be placed in the side columns */
margin-right: 10px;
/* Tips for mainContent:
1. If you give this #mainContent div a font-size value different than the #sidebar1 div, the margins of the #mainContent div will be based on its font-size and the width of the #sidebar1 div will be based on its font-size. You may wish to adjust the values of these divs.
2. The space between the mainContent and sidebar1 is created with the left margin on the mainContent div. No matter how much content the sidebar1 div contains, the column space will remain. You can remove this left margin if you want the #mainContent div's text to fill the #sidebar1 space when the content in #sidebar1 ends.
3. To avoid float drop, you may need to test to determine the approximate maximum image/element size since this layout is based on the user's font sizing combined with the values you set. However, if the user has their browser font size set lower than normal, less space will be available in the #mainContent div than you may see on testing.
4. In the Internet Explorer Conditional Comment below, the zoom property is used to give the mainContent "hasLayout." This avoids several IE-specific bugs that may occur.
.twoColElsRtHdr #mainContent {
   margin: 0 13em 0 10px; /* the left margin will look best if you match the padding amount to the header and footer. */
.twoColElsRtHdr #footer {
padding: 0 10px; /* this padding matches the left alignment of the elements in the divs that appear above it. */
background:#DDDDDD;
.twoColElsRtHdr #footer p {
margin: 0; /* zeroing the margins of the first element in the footer will avoid the possibility of margin collapse - a space between divs */
padding: 10px 0; /* padding on this element will create space, just as the the margin would have, without the margin collapse issue */
/* Miscellaneous classes for reuse */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
float: right;
margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page */
float: left;
margin-right: 8px;
.clearfloat { /* this class should be placed on a div or break element and should be the final element before the close of a container that should fully contain a float */
clear:both;
    height:0;
    font-size: 1px;
    line-height: 0px;

Mavericks Maps App not showing any images?

My Maps App on the new Mavericks OS is not showing any images.
Can anybody help me ?

Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

Nokia X3 not displaying any Pictures!!!

My Nokia X3 is not displaying any pictures in the viewer, it only displays a message that "No Photos To Display", can any one tell me what should I do, I even tried *#7780# and reinstalled the firmware but still the problem persists?
Help Me Please!!!!

Hi everybody Im having the same problem... I just brought my phone yesterday...
Now when I click on the camera button.. It takes hours to display the preview...
so I remoove the preview from settings... and found that actually Image does no save in the
Memory card or any where... Problem came after updating the firmware...
Any help will be much appreciated....
Tried the memry card thing.. does not work ...
JeremyPham wrote:
My phone update with a memory card inside and after that it load image very slow . May be it create cache or something . but after that it became normal. Try to format your memory and install image again

Launchpad not displaying any apps

Launchpad does not display any apps. Continues to say that it is loading applications. Sent application db file to trash and did refresh with no luck.

Could try Deleting all of them them drag the ones you want back in.
https://discussions.apple.com/message/15699049#15699049

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

I installed adobe reader but it will not display any pdf

I installed adobe reader but it will not display any pdf

What version of Reader in what OS? Does the program open? What happens when you use File->Open to open a pdf file on your computer? Any error messages?

MAX will not display any installed modules mounted to cRIO-9074 chassis WinXP SP3 LV2010 developer

MAX will not display any installed modules mounted to cRIO-9074 chassis WinXP SP3 LV2010 Developer Suite.
I can see the backplane in MAX and Project explorer but none of the modules show up for configuration in the drop down lists. The LV was just installed on the PC with RT/FPGA/Sound and Vibration. I have Admin and am accessing through a PCMCIA Ethernet card. I have to disable normal wireless Ethernet just to see the cRIO unit at all.

Well, you actually won't be able to see the C-series modules for a cRIO in MAX. Take a look at this KnowledgeBase article for a little more information.
As far as not being able to see them in the Project explorer, are you trying to run in FPGA or Scan Interface? If you're using the FPGA Interface, you'll have to make sure to expand the FPGA Target tree in the Project explorer to see these modules.
Regards,
Austin S.
National Instruments
Academic Field Engineer

When I try to bookmark a page, the choose option dies not display any of the folders in my bookmark menu

Question
When I try to bookmark a page, the choose option dies not display any of the folders in my bookmark menu
I have a new computer and download of Mozilla Firefox, but imported bookmarks from older computer. Could that be the problem?

I'm not familiar with Windows 7, but... is it possible there is a permissions problem with your profile folder, or read-only set on any database files?

Updated my computer and will not show any images or documents unless they are on desktop only HELP!

Since I have updated my computer I can not find any images that I have saved in the past unless I have saved them directly in a folder on the desktop. I have tried searching all files and it only shows what I have on my desk top. Any help would be great!

You've tried charging from a wall outlet?
My Ipod Will not charge on any usb or devices and wont connect to anyones computer
It may need a new battery > Apple - Support - Service Answer Center
edited by: cs

SuperFrench is found but this font can not display any text

"SuperFrench" font comes from Autodesk. this fonts's real file name is supef__.ttf
If it is placed in C:\Windows\Fonts folder then it is available for Windows native apps such as MS Excel.
Java GraphicsEnvironment finds "SuperFrench" font
but this font can not display any text.
This happens in both Java6(1.6.0_34) and Java7(1.7.0_06)
try this
import javax.swing.*;
import java.awt.*;
import java.util.*;
public class FontTest01 {
public static void main( String[] args ){
    FontTest01 app = new FontTest01();
    app.run();
void run() {
    String fontName = "SuperFrench"; //** SuperFrench font
    GraphicsEnvironment ge = GraphicsEnvironment.getLocalGraphicsEnvironment();
    String[] existFontNames = ge.getAvailableFontFamilyNames(Locale.ENGLISH);
    boolean fontExists = false;
    for( int i=0 ; i<existFontNames.length ; i++ ){
      if( existFontNames.equals( fontName ) ){
fontExists = true; break;
if( fontExists==false ){
System.out.println( fontName +" does not exist" );
System.exit(-1);
JLabel label = new JLabel( "ABCDEFG" );
Font font = new Font( fontName, Font.PLAIN, 20 );
System.out.println( font.getFontName() );
label.setFont( font );
JFrame f = new JFrame();
f.add( label );
f.setSize( 180, 120 );
f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
f.setVisible(true);
Edited by: TadashiOhmura on 2012/06/17 23:04
Edited by: TadashiOhmura on 2012/06/18 7:50

Thank you for your replay.
I face the same trouble with JavaFX
I report this problem into Jira and filed as RT-22641
Some members of Oracle developer team write comments for this issue.
http://javafx-jira.kenai.com/browse/RT-22641
This font has some irreguler structure.
I hope Java font system will deal with it.

Outlook does not display linked images after installin 7525 printer

Installed 7525HP photosmart printer earlier today. Since installation, Outlook does not display linked images when I open emails. p6620f HP desktop computer.

You're probably not going to like the answer: Welcome to HTML-based email, and web (browser- or mail-based) rendering incompatibilities and quirks.
Newer Microsoft Internet Explorer is (much) better than older releases, so see if a newer Windows client or a newer version of Outlook does better.
If you really want to see what's going on here, view the raw HTML that's getting generated, and see what Microsoft wants or uses or expects within Outlook, and send that.

Oracle Apps adapter not displaying any Business Events

Hello
We have configured a Business Event in Oracle ebs R12 instance. Now we are trying to configure Oracle Apps Adapter in Oracle Jdeveloper. The version is 11.1.1.3.
The apps adapter wizard; after connecting to the ebs instance; does not display any tables/Business events.
The connection to the ebs instance is done by a normal user i.e. 'apps' user credentials are not used. We are not provided with 'apps' user credentials due to security reasons. We need help in figuring out the privileges that shld be granted to the 'normal' user so that we can browse and select the Business event in Jdeveloper and also the apps adapter can create the subscriptions and queues successfully in ebs.
Any pointers will be greatly appreciated...
Thanks
Edited by: Ruplim on Jun 7, 2012 10:15 AM

Hi Ruplim,
I am new to this topic and dont really know how to go about this. So can i assume from your post that the oracle apps adapter can subscribe to an event in EBS. If yes, can you tell me how i can do this?
Thanks

Trash not displaying any images

Similar Messages

Maybe you are looking for