TREND ANALYSIS IN OBIEE

hi all,
i have a single week column and single rank column in my db , i am trying to analyze a rank pattern over 2 weeks , for that i make two copies of same week as week1 and week2 and similarly two copies of rank as rank1 and rank2 , and i created dashboard prompt filters for week1 and week2  with different formula but having same mathematically same meaning, but when i am getting some error when  iam selecting different values for week1 and week2
SOME ONE PLZ HELP !!
thanks ,
aditya

Thnx for reply.
We have already tried these two options and found both solution did not work in our case.
1. AGO : A time series aggregation function that calculates the aggregated value from the current time back to a specified time period.
In our case we need the comparison of this year with last year.
2.Use Filter year >= @{pv}-1 and year <= @{pv}
We do try this option. But the problem is to make the filter to '@{pv}-1'. Filter always fetching the value of presentation varaible 'pv'.
If we put 'pv-1' in the filter section it is converting as '@{pv-1}' not as '@{pv}-1'
Edited by: user938840 on Nov 22, 2011 2:14 AM

Similar Messages

  • MIC / VENDOR Trend analysis in Graphical mode

    Dear Freinds,
    please explain me how top perform trend analysis in graphical mode for a material procured from a vendor over a period of time.
    Report should display the charecterstics recorded for Material / Vendor combination.
    I am not using SPC charecteristics.
    regards
    jeevan

    Dear Jeevan
    There are two ways in which you can do the graphical analysis for material vendor combination
    1) You can do it in MCVD. Here you can get all the relevant mics in the desired combination
    2) But a better graphical analysis can be done in QS28. But here you will have to specify the MIC.
    Go to QS28. Input the plant and the mic and execute. You will get MIC details. Choose the MIC and click on Result history. A pop will appear Result history Limit Selection. Here you can mention the vendor . Execute you will get the entire list of lots with all values and charts. You can run chart, histogram, cp , CPk values. Run chart for mean, runchart for single values etc
    You can do this through the inspection lot also. Go to QA33 > result> Select the Mic> go to Result history >enter the vendor. Execute you will get the entire list of lots with all values and charts
    Hope this helps
    Regards
    Gajesh

  • Can multiple tabs be opened in one analysis in OBIEE 11g

    Hyy All, I am not able to open mltiple tabs in one analysis in obiee, Before It, I was using SAP BO, It was possible in there, Please help me out. .

    Hii ChristianBerg,  Thanks for replying..
    First Point by you (- Multiple views inside a view selector within any given analysis), I am adding some more to it that I need "- Multiple views inside a view selector within any given analysis in tabs" :: How can I achieve It? Can you tell provide me any sample report which have multiple sub reports or views? please.. Thanks a lot In Advance.

  • Steps to Enable Trend in KPI ( Use Trend Analysis)

    Hi All,
    I am trying to use trend analysis on KPI but I am unable to do the same. I have month as the Chronological Key. Can anyone guide me regarding the steps that I need to take for this to work on Database or Repository level or if I need to do something specific when I create the KPIs.
    Thanks

    Hi Helena,
    Below are the values from the registry key we are passing to the weblogic service.
    We do not use any of the "Start(WLS)(Weblogic).cmd" scripts to start the Weblogic service, only the WSM (Windows Service Manager).
    Please let me know if you have any further questions.
    Thanks for the assitance.
    Regards,
    -Nader
    -server -mx1024m -verbose:gc -XX:MaxPermSize=128m -Xmanagement -classpath d:\bea\JROCKI~1\lib\tools.jar;d:\bea\WEBLOG~1\server\lib\weblogic_sp.jar;d:\bea\WEBLOG~1\server\lib\weblogic.jar;d:\bea\jdk142_04\jre\lib\rt.jar;d:\bea\WEBLOG~1\server\lib\webservices.jar -Dweblogic.RootDirectory=d:\bea\j2ee\domains\PERFD-RD2 -Dweblogic.Name=perfd-rpd2a -Dbea.home=d:\bea -Dweblogic.management.username=system -Dweblogic.management.password=weblogic -Dweblogic.management.server=http://10.198.39.237:7001 -Djava.security.policy=d:\bea\WEBLOG~1\server\lib\weblogic.policy -Dsun.net.inetaddr.ttl=0 weblogic.Server

  • Cross subject area analysis in OBIEE 11 RPD

    Hi,
    Can anybody tell how to implement Cross subject area analysis in OBIEE 11g in RPD. What are the changes in OBIEE 11g wit respect to Cross subject area analysis when compared to OBIEE 10g.
    Thanks,
    Anilesh

    Hi,
    Its same as 10g, but when applying filters, you can hide or unhide the filters.
    http://prasadmadhasi.com/2012/01/30/working-with-multiple-subject-areas-in-obiee-11-1-1-5-0/
    http://oraclebiee11g.blogspot.in/2011/01/querying-across-multiple-subject-areas.html
    Using answers-
    http://gerardnico.com/wiki/dat/obiee/multiple_subject_area
    Please let me know further and hope this helped/ answered.
    Regards
    MuRam

  • Regular snapshots of project information for trend analysis

    Hi folks,
    I am working with a client who wants to take regular (monthly) snapshots of Project Server data, specifically project status, estimated, actuals, resource allocations etc. I note that 2007 and 2010 doesn't have anything OOTB besides BL functionality, does
    Project Server 2013 offer anything new in this area?
    Example: we want to match SAP actuals with Project Server current/estimates and record monthly snapshots of this information so we can do trend analysis. Is it possible in Project Server 2013 OOTB to take monthly snapshots beyond BL 10+1 ?
    Thanks,
    Gavin.

    Hi Gavin,
    As Guillaume and Sachin have correctly stated, there is no monthly snapshotting functionality OOTB. The easiest solution is to do this via SQL. I blogged about a simple example a few years back, see below:
    http://pwmather.wordpress.com/2012/04/27/projectserver-data-snapshot-for-reporting-ps2010-msproject-sp2010-excel-ssrs-sql/
    That should give you an idea.
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS

  • BPMon alert reporting not showing any data for Trend Analysis

    Hi,
    I have setup BPMon and performed the initial setup for BW reporting. There are alerts being generated by the BPMon setup and the data has been transferred to the 0SM_BPM cube.
    But when I start the Trend Analysis report I dont get any Solution for selection to generate the trend analysis chart.
    I have followed all the steps mentioned in the setup guide. Please suggest any remedy.
    Regards,
    Vishal

    Hi ,
    If your query is on multiprovider , then makesure to check there are no restrictions/filters on cubes.
    Also inlcude any keyfigure from the cube,where other characteristics are being assigned from or where u r seeing data, in the query.
    If you dont want to see the Keyfigure, u can hide it using keyfigure display properties in the query designer.
    Hope this helps,
    Aparna Duvvuri

  • Service Level Reporting - Trend Analysis data missing in the report

    Hi Experts,
    I'm working with sap solution manager and Business Process Monitoring.
    I can't get to know how to configure the system in order to get Service Level Reporting collecting data for "Trend analysis" related to business processes.
    In fact, in my reports each trend analysis graph (last week/month six months) is empty, no matter which aggregation type (AVG, MAX or SUM) I use.
    It seems like the BI within the Solution Manager doesn't collect the data, or doesn't provide them to SL reporting.
    How can I check whether something is missing in my configuration?
    Thanks in advance for your help!
    Regards,
    Paolo

    Hi Paolo,
    Did you check the followings notes:
    1068944     EarlyWatch Alert: Various Smaller Corrections
    1470008     EarlyWatch Alert - Issues in ST-SER 701_2010_1
    If they do not help, what is your solution manager version?? (ST 400 and ST-SER component versions)
    Regards,
    Daniel.

  • BW Report requirement (Trend Analysis Report (Project Systems))

    Hello, BW experts……
    I need some help….
    This requirement is for Trend Analysis Report (Project Systems)
    I am loading data from ODS to Cube as a Delta Upload
    ODS is getting data from R/3 data source as a full upload (no delta in the Datasource)
    I added one custom field in the cube (0PS_C04) and that custom field (Date field) is going to pick current date (Sys date) through formula in the update rules.
    When I am loading data from ODS to Cube, if the value is coming to the amount field, then the current date field is going to get the current date to the cube
    If there is no record is updated in R/3, then delta is not going to update any record to the Cube.
    If no record is updated to the cube to the particular project number, then Date field is not going to get any data from update rules.
    But I need to see all dates in the cube even though there is no update in the R/3 for that project.
    Example:
    Proj---day1        2       3      4     5      6
    -XYZ---     10        5      --      3     --     2
    In the report now I am able to see some thing like this
    Project   day1        2      4     6
    XYZ        10        5     3     2
    But I am expecting some thing like this…
    Project   day1        2       3      4     5      6
    XYZ        10        15       15     18     18     20
    Can anyone please help me in this…..
    Any input is strongly appreciated
    Thanks,
    Rajesh

    Rajesh,
    Exception aggregation with last value and reference characteristic as calday should solve the problem.
    Cheers
    Aneesh

  • Trend Analysis in Line Chart

    Hi Experts,
    I would like to display a trend line of a key figure in the line chart just like you can do it in WAD for example based on an existing data series.
    As I could not find any option in the properties of the line chart, I was wondering whether there is any workaround which you might know in order to implement such a trend analysis chart?!
    Thanks in advance for any reply!
    Cheers
    Tobias

    Hi,
    if possible try to add trend Line value in another keyfigure ( Trend_Line ) in BEx Query .
    And then Display it in Line Chart .
    Or
    if your Trend Line value is fix then add Text set top border & arrange it behind line chart .

  • Trend Analysis creating problems

    Hi All,
    I have a time hierarchy in place and I have made Day, Month and Year as Chronological Keys but when I am trying to use the trend analysis in KPI definition I am unable to see any results. I define Day as my Trend Analysis parameter in the KPI Definition but nothing shows up in the Trend Analysis Column. Also my Time Graph shows no result when I create the same.
    Warm Regards
    Abhishek

    Hi Nirav,
    Suppose user is entering fiscal year period as x in a variable. Then what I told is
    1.Rt. Click on the Fiscal Year/Period Characteristic and select restrict
    2. Select the Value Ranges option and select between.
    3. Put the user entering variable x in the two text boxes
    4. click on the dragging to rt arrow
    5. rt click on the dragged variable range and select set offset for variable
    6. then for the first popup put to -3 or 4 as required and then 0 for the next and press ok..
    This will give result as (customer entered fiscl period - 4) to Customer entered fiscal period). And if you are giving fiscal year restriction in addition, it wont consider previous year.

  • Trend analysis chat for purchase

    Hi,
      i have material purchased from multiple suppliers, i want to compare the delivery dates of all suppliers for the same material, price etc in Trend analysis format.
    regards
    satish.

    Hi,
    Did you check the business content. If you take a look at the purchasing cubes there you can find the queries that you need. Please check the following link.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
    Regards,
    ®

  • Seeing the detailed sql  with db table names for an analysis in OBIEE 11g?

    Hello All,
    I am trying to see the detailed sql for an analysis to see which tables my analysis is hitting back in the database. Currently all i see is the subject area name with bunch of s_0, S_1,S_2.... but i want to see the actual table names which the Analysis is pulling the data from, I am new to OBIEE. Any help or advise with the steps in order to accomplish my goal is greatly appreciated.
    Thanks,
    Ravi.
    Edited by: user1146711 on Aug 23, 2011 3:24 PM
    Edited by: user1146711 on Aug 23, 2011 3:30 PM

    Hi ravi,
    You can check in the presentation services by going to Administration/manage session/view log for the specific report that you are running.
    You can even check the SQL in log file NqQuery.log in your installation folder C:OracleBI\server\log\NqQuery.log
    Check this Courtesy by gerard http://gerardnico.com/wiki/dat/obiee/manage_session_log
    hope answered.
    Cheers,
    KK

  • Trend Analysis with SQL

    Hi,
    I have created a table with customer nos and the monthly summaries of their basket values, no of items purchased and no of visits for a period of two years.
    So I have now a summary table that looks like:
    Cust_no,purch_month1,..,purch_month24, items_month1,..,items_month24, Visits_month1,..,visits_month24
    Total_purch, total_items, total_visits.
    From this table I want to analyse the purchase and visits trends and then categorise them to, for example, loyal customers, loyalty-loosing customers etc.
    This means I need a function that analyses values from a single row and then group the behaviour to get the counts.
    Do you know of any function that can do this sort of activity?
    Thanks
    Sathyan

    Not sure what you mean by RFM analysis ?
    How would you define those terms - "Bell Shaped" - "Positive/Negative Slope" - what if it has 2 bell shapes in the curve - does that count or not ? or 3 or 4 bells ? what if it has a positive and a negative slope or 2 positives and 1 negative ?
    If you can define specific rules for your terms then you can implement them in code, e.g. if there are more than 2 consecutive points where the values go up then there exists a "Postive Slope" to the curve.
    Jeff

  • Trend Analysis

    Hi experts,
                      I have 2 inspection parameters during raw material receipt- pH and viscocity and one parameter for finished good inspection- purity. How can I get a period-wise statistical trend of parameters during good receipt (vendor-wise upper/lower limit/target value vs. mean vs. standard deviation) and final inspection (customer/ Finished good batch wise upper/lower/target value vs. mean vs. standard deviation). Please suggest....
    Regards,
    Sunit

    Hi Sunit,
    You can use LIS for this requirement and it's quite easy also.
    In SAP Menu path go to Logistics - Logistics Controlling - QM information system - Standard Analysis - you can select wether you want to see it for material, Vendor Customer etc.
    If you want further details you can use flexible analysis also.
    If you use either method, when you go to the analysis (ex: for Results  tcode :MCXB) then inside the analysis you can see a time series button ( or click on Ctrl + Shift + F4)
    after selecting a relevant column.
    Hope this will help you to solve the requirement
    Best Regards
    Charith

Maybe you are looking for