Trex installation

Hi All,
I am Planning to install Trex and i am new to this. We are running with JAVA + ABAP stack standalone box.
We need to the installation in the same box, is it possible or not ?
While starting the installation i am getting three types of options
1. Global File system with a Trex instance
2. Installing a TREX Instance Only
3. Installing a TREX Global File System
In my case which option i have to choose ?
While doing the installation it is asking for SAP SID here i have to give new one or already existing one ?
Suggest me how to proceed furhter.
Kind Regards,
Phanikumar.

Hi PhaniKumar,
Check the following TREX Installation guide:
[https://websmp102.sap-ag.de/~sapidb/011000358700004245702005E.PDF]
Hope this helps.
Regards,
Adren

Similar Messages

TREX installation and configuration in Portal 7.0 SP9 evolution version

I have got install the 7.0 SP9 evolution version . In the specification , it has given clearly that, TREX is not available. How can i install TREX in the portal system.
where is the Trex installable avilable ?
which version is suitable for the 7.0
What are the configuration steps ?

Hi Vijay,
you should use either TREX 7.0 or TREX 7.1 with the EP 7.0 . Please see the TREX installation Guide for detailed information how to install and configure the TREX for using with the Portal.
Best regards,
Mikhail

Help with TRex Installation

Hi, I am trying to install TRex (6.1.09.00) on my local portal (Netweaver 04 (640) - Stack 12) and during the 2nd last step of the installation I get the following message:
"error starting web server" and then the installation fails. When I checked the log, I got the following error message:
"The system cannot find the file specified.)in execution of a 'CreateProcess' function, line (278), with parameter (C:\usr\sap\Python
python.exe C:\usr\sap\trex_02/CCMS/install_config.py)".
I tried installing a couple of times and I always got the same error messages. Can anyone please help me? Thanks a lot for your valuable time.
Sincerely,
Sri

Hi,
When once Trex installation is failed, subsequent tries will also get the same error. My advice woudl be to uninstall the trex, delete all the sap_inst dir contents and delete the trex website after uninstallation. Go ahead with fresh installation. But the specify the new trex instance suppose previously you have specified 00, now specify 02 or 03 etc.
Never install Trex on same server on which portal is installed. It slow down your portal performance.
As well you need to satisfy the pre-requisites specified in installation directory.
https://websmp102.sap-ag.de/~sapidb/011000358700000082762005E.PDF
Hope this helps.
thanks,
Praveen
PS. Dont forget to reward points

Trex installation error

hello friends,
iam doing trex installtion in my local system, it's in installwebserver and trex webpages. i got bellow error:
TRACE [synxcaccmg.cpp:648]
 CSyADsPath::fromString(SAP_ALL\IIS_WPG)
Account SAP_ALL/IIS_WPG has ADS path 'WinNT://SAP_ALL/IIS_WPG'
TRACE [synxcaccnt.cpp:571]
 bool CSyAccountImpl::do_isMember(IUnknown* pAccount, iastring sName) const
INLD50044610A\rajadm is not member of group "SAP_ALL\IIS_WPG"
TRACE [synxcaccmg.cpp:648]
 CSyADsPath::fromString(INLD50044610A\rajadm)
Account INLD50044610A/rajadm has ADS path 'WinNT://INLD50044610A/rajadm'
TRACE [synxcgroup.cpp:425]
 void CSyGroupImpl::addMember(PSyAccount pAccount)
IADsGroup::Add: HRESULT = 0x8007056b
ERROR 2008-02-15 17:06:41 [synxcgroup.cpp:426]
 void CSyGroupImpl::addMember(PSyAccount pAccount)
FSL-01006 Unable to add account <#0> to group <#1>. <#2>
TRACE [iaxxejsbas.hpp:270]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown std::ESyException: ESAPinstException: error text undefined
TRACE [iaxxcwalker.cpp:301]
 CDomWalker::processStep()
<html><head></head><body>An error occurred while processing service SAP NetWeaver '04 SR1> SAP System Installation> Search and Classification (TREX)> TREX Instance Upgrade / Installation. You may now<ul> <li>press Retry to repeat the current step.</li> <li>press the View Log button to get more information about the error.</li> <li>stop the task and continue with it later.</li> <li>reset your input for the current task. In this case, SAPinst will permanently remove all installation files from the installation directory. This gives you the opportunity to restart from scratch.</li></ul>Log files are written to C:\Program Files\sapinst_instdir\NW04\PATCOL640\WEBAS630\IND\TREX\MAIN.</body></html>
pls help me out in this issue.
points guaranteed..
regards,
venkat

Hi Rich,
Thanks for the reply. I tried whatever you have said. After executing the command "G:\usr\sap\trex_02\TREXDaemon.exe -f G:\usr\sap\trex_02\TREXDaemon.ini", instead of MSVCP60.DLL missing, I got
"An instance of this service is already running.
You should consider checking if the process with the id 2548 is running and of type TREXDaemon. If you are sure that there is no instance alive remove the file G:\usr\sap\trex_02\lock\[email protected] and restart." and also I have the MSVCP60.DLL file under C:\WINDOWS\system32. My EP is on Windows Server 2003 Enterprise Edition.
I removed [email protected] and restarted. I am still getting the same error "Index could not be created; creating index failed: HTTP server error: 502 (Errorcode 7266)". I am still not able to create an index. While TREX installation i have a first_test_index created succesfully. But No index Server is Displayed in TREX Monitor. While performing Serach I get No Search Index could be found.
Rich could you help me out.
Thannks and Regards,
Piyush

TREX installation problems

I have EP 6.0.2.4.7 on MSS 8.0, J2EE pl 22
The Portal is up. I tried to install TREX on the same server. However I had not installed the IIS before I started. I got an error during the TREX install about creating a site in IIS. So I decided to uninstall TREX cleanly and re-install after I got my ISS up. That way I hoped it would create the site this time.
However I guess the Control panel - Add remove programs does not uninstall TREX cleanly. Because I tried to un-install / re-install and this time it was not showing the TREX services as originally. One more pass at the same, and now I have errors during installation.
My question is, how can I remove all traces of TREX from this box ( while not touching the portal, J2EE, MSSQL etc.), so that I can start again just as if it was the first time......
Regards, Sanket

Clear out all of your temp folders. TREX installation stores some information in the temp folders to be re-used. I've ran into the same problem and noticed that when i reinstalled with the same user my previous settings were remembered, but when I installed with a other user I could select the options again......

ERecruitment TREX Installation Index category

Hi All,
SDN is really very helpfull. Thanks to one and everyone for sharing their knowledge. I am having a problem with TREX installation.
We installed TREX with SES. First i created Search service relation with TEST_SSR. with this ssr a index category is created. I got some errors in this index category. So i deleted this index category and tried to create another Search service relation with different name. Here New index category is not created but the old category is exisiting and when i am trying to use it, it is giving an error that "TEST_SSR" does not exist. So could u pls suggest me to create a new index category for new SSR.
Thanks

Hi,
Now for the step activate index category enter the search server id TREX_SSR as you have created. keep it as it is.
Then check for the rfc destinations if its fine and the link is made.
Now after that you will create the index category so only refer to the last step(split in multiple to create the index category as in the document).
Regards,
Divya

TREX Installation, Error in phase - Install TREX web resources and finalize

Hello,
Platforms:
SO - Win 2008 (R2) X64
During the last phase "Install TREX web resources and finalize instance" in installation process of TREX 7.1, it show me a weird error...
It seems that was some problem during the creation of sap start service of this new instance... but that is weird because I checked at services.msc and that service SAPTSM_02 and nothing seems wrong with it, it seems that was well created and it is in Started mode!... I checked firewall settings (all of them are in OFF status), I also checked CUA settings (is stopped)...
I searched for this error and I found the following SDN forum:
SAPNW EHP1 SR1
I already press the retry button but it always show me the same error.
During this phase the SAPInst window show some information and in there I see this two:
creating sap start service of instance TSM/TRX02...
service not correcttly installed.
It is very weird thing!
I will post some log files such as sapstartsrv.exe and sapinst.log.
sapstartsrv.exe:
Test call to Service failed: 80080005
CO_E_SERVER_EXEC_FAILURE: Server execution failed
Service not correctly installed
sapinst.log:
INFO 2012-01-20 16:29:24.446
Creating file C:Program Filessapinst_instdirNW702STANDALONETREXCIsapstartsrv.exe.log.
INFO 2012-01-20 16:29:24.457
Output of F:usrsapTSMTRX02exesapstartsrv.exe -stdin is written to the logfile sapstartsrv.exe.log.
WARNING 2012-01-20 16:31:41.182
Execution of the command "F:usrsapTSMTRX02exesapstartsrv.exe -stdin" finished with return code -1. Output:
Test call to Service failed: 80080005
CO_E_SERVER_EXEC_FAILURE: Server execution failed
Service not correctly installed.
ERROR 2012-01-20 16:31:41.380
MOS-01011 'F:/usr/sap/TSM/TRX02/exe/sapstartsrv.exe' returned with '-1'.
ERROR 2012-01-20 16:31:41.381
MOS-01011 'F:/usr/sap/TSM/TRX02/exe/sapstartsrv.exe' returned with '-1'.
ERROR 2012-01-20 16:31:41.470
FCO-00011 The step createService with step key |TREX_NW_CI_MAIN|ind|ind|TREX|ind|0|0|TREX_MAIN|ind|ind|TREX|ind|0|0|createService was executed with status ERROR ( Last error reported by the step :'F:/usr/sap/TSM/TRX02/exe/sapstartsrv.exe' returned with '-1'.).
Can you help me please, how can I solve this?
Kind regards,
JDimas

Hello Arjun Venkateswarlu,
1).Is your Windows Firwall is enabled ? Disable the windows Firewall and also restart SAPinst
- As I said the windows firewall is disable (OFF)
2). Make sure that <sid>adm belongs to the local admins or Better provide the domain admin rights to the id which you are using for installation if it is domain installation.
- All the created users during this installation belongs to local admins. This isn´t a domain installation!
3). Try Restarting the installation by stopping and starting Windows and restart SAPINST and coninue Old Installation again.
- I already did that... but it continues to show me the same error!
Any other tip?
Kind regards,
JDimas

Trex installation error FSL-00001 System call failed. Error 3

I am installing trex on multiple hosts for a Production setup. Trex is version 7.0 patch level 40. All hosts are Windows servers running on "Windows Server 2003 R2 Enterprise x64 Edition, Service Pack 2" Distribution of trex instances are as follows,
Index Server =1
Slave Server =1
Backup Server =1
File Server =1
I started of with installing Trex global filesystem which resulted in following error,
ERROR 2008-10-23 15:19:27
FSL-00001 System call failed. Error 3 (The system cannot find the path specified.
) in execution of system call 'FindFirstVolumeMountPoint' with parameter (
?\Volume{51f489f8-8ef6-11dd-886f-001e0beae60e}\), line (91) in file (synxcfsmit.cpp).
ERROR 2008-10-23 15:19:27
MUT-03025 Caught ESyException in Modulecall: The system cannot find the path specified.
ERROR 2008-10-23 15:19:27
FCO-00011 The step getMounts with step key |NW_TREX_Prepare|ind|ind|ind|ind|0|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|NW_getMounts|ind|ind|ind|ind|0|0|getMounts was executed with status ERROR .
Installation is performed by administrator user and so has full access rights. Has anyone encountered such an error before.
Regards,
Sandeep

I uninstalled the Python application via the Windows "Add/Remove" programs utility and that seems to have resolved the issue.
TREX has been installed successfully.

TREX Installation Errors

Hello I need help, I´m installing TREX in a separate host from portal, the installation does not finish and I recive the following error messages when the installation wizard is starting TREX_02 instance:
==============
Error 1
FSL-06002 Error 1053 (The service did not respond to the start or control request in a timely fashion.) in execution of a 'StartService' function, line (273), with parameter (TREX_02_ Service).
Error 2
FSL-06002 Error 1057 (The account name is invalid or does not exist, or the password is invalid for the account name specified.) in execution of a 'StartService' funcition, line (1310), with parameter (TREX_02_service).
Error 3
MOS-01199 Could not start the 'TREX_02_Service' service on host 'Local'
==============
The user account was created as it says "TREX Official Installation Guide", page 24 "Creating a user" AND "Installation Preparations" were made. I´m installing TREX ver. 6.40
regards

Hi Ruben,
here:
http://service.sap.com/message
but only, if you have an S-User...
Karsten

Error during trex installation

hello experts,
while doing trex 7.1 revision 38 installation in windows x64 server, following error is coming :
Deploying binaries (sapcpe)
>>>ERROR:execution of sapcpe FAILED with rc=1 - TREX setup cannot proceed.
======================================================
END: 2010-04-20_13.05.38
installation ->FAILED
see also logfile: C:\Program Files\sapinst_instdir\TREX\install\trex_install_2010-04-20_13.03.37\install.log
From
C:\Program Files\sapinst_instdir\TREX\install\trex_install_2010-04-20_13.03.37\install.log :-
Deploying binaries (sapcpe)
E:\usr\sap\TR1\SYS\exe\nuc\ntamd64\sapcpe pf=E:\usr\sap\TR1\SYS\profile\TR1_TRX02_inblrjaldbm list:E:\usr\sap\TR1\SYS\exe\nuc\ntamd64\trexbin.lst stdoutput >"C:\Program Files\sapinst_instdir\TREX\install\trex_install_2010-04-20_13.03.37\sapcpe_out.log" 2>&1
>>>ERROR:execution of sapcpe FAILED with rc=1 - TREX setup cannot proceed.
Exception description:
Traceback (most recent call last):
File "E:\SAPDumps\tx_trex_content\TX_WINDOWS_X86_64
support\_install.py", line 399, in install
    installation.doItOrNot(installation.runsapcpe, description="Deploying binaries (sapcpe)")
File "E:\SAPDumps\tx_trex_content\TX_WINDOWS_X86_64\support\setuplib.py", line 1360, in doItOrNot
    step(*args, **keyArgs)
File "E:\SAPDumps\tx_trex_content\TX_WINDOWS_X86_64\support\setuplib.py", line 2392, in runsapcpe
    raise SetupException("execution of sapcpe FAILED with rc=%d" % (int(rc)))
SetupException: >>>ERROR:execution of sapcpe FAILED with rc=1
======================================================
END: 2010-04-20_13.05.38
installation ->FAILED
see also logfile: C:\Program Files\sapinst_instdir\TREX\install\trex_install_2010-04-20_13.03.37\install.log
This is the latest revision of trex that we are installing. Please suggest what should be done.
Thanks,
Ankit

Hi,
I ahve renamed the folder inblrjaldbmbackup to inblrjaldbmbackup_old.. After continuing the installation, it created another inblrjaldbm~backup folder. Then i renamed the folder to inblrjaldbm and i got this new error.:-
From install.log :-
_install.py
Action:    install
SID:       TR3
Instance: 10
Host:      inblrjaldbm
Target:    e:\usr\sap
Domain:    inblrjaldbm
Persistence layer: fileSystem
======================================================
Logdir is C:\Program Files\sapinst_instdir\TREX\install\trex_install_2010-04-22_13.01.33\trex_install_2010-04-22_13.10.23
======================================================
TREX [7.10.38.218026] for [ntamd64]
======================================================
BEGIN: 2010-04-22_13.10.23
checking local administrators
SAP Instance D7S 01 DVEBMGS01
DVEBMGS D7S 01 E:\usr\sap\D7S E:\usr\sap\D7S\DVEBMGS01 other None None None None None
SAP Instance DM2 00 DVEBMGS00
DVEBMGS DM2 00 E:\usr\sap\DM2 E:\usr\sap\DM2\DVEBMGS00 other None None None None None
profile path could not be resolved for system TR2 02
trex TR2 02 E:\usr\sap\TR2 E:\usr\sap\TR2\TRX02 DI None None None None None
trex TR3 10 E:\usr\sap\TR3 E:\usr\sap\TR3\TRX10 CI None None None None DEFAULT
Cocktail is: TREX_ALONE
Installing Version: 7.10.38.218026
SystemType is UNDEFINED
IntegratedSystem: False
saploc points to E:\usr\sap
overwriting invalid system location with E:\usr\sap
host       : inblrjaldbm
platform   : ntamd64
sid        : TR3
systemloc :E:\usr\sap
globalSystemLoc :E:\usr\sap\TR3\SYS
instance   : 10
instanceloc:E:\usr\sap
getSysDir       : E:\usr\sap\TR3\SYS
getSystemDir    : E:\usr\sap\TR3\SYS
getSysExeDirAbs : E:\usr\sap\TR3\SYS\exe\nuc\ntamd64
getGlobalDir    : E:\usr\sap\TR3\SYS\global
getProfileDir   : E:\usr\sap\TR3\SYS\profile
getGlobalInstallDir    : E:\usr\sap\TR3\SYS\global\trex\install
getGlobalSupportDir    : E:\usr\sap\TR3\SYS\global\trex\install\support
getGlobalSystemDir     : E:\usr\sap\TR3\SYS
getCfgdirName          : inblrjaldbm
======================================================
CONTINUE installation
from here: C:
Program Files
sapinst_instdir
TREX
install
trex_install_2010-04-22_13.01.33
======================================================
======================================================
SarTrek.registerstarter -
Registering Service sapstartsrv and starting TREX
E:\usr\sap\TR3\TRX10\exe\sapstartsrv.exe -r -q -p E:\usr\sap\TR3\SYS\profile\TR3_TRX10_inblrjaldbm -s TR3 -n 10 -U inblrjaldbm\SAPServiceTR3 -P ********* -e inblrjaldbm\tr3adm >"C:\Program Files\sapinst_instdir\TREX\install\trex_install_2010-04-22_13.10.23\sapstartsrv_reg.log" 2>&1
>>>ERROR:registration of sapstartsrv FAILED with rc=1 - TREX setup cannot proceed.
Exception description:
Traceback (most recent call last):
File "E:\SAPDumps\tx_trex_content\TX_WINDOWS_X86_64
support\_install.py", line 429, in install
    installation.doItOrNot(installation.registerstarter, args=[options.password], description="Registering Service sapstartsrv and starting TREX")
File "E:\SAPDumps\tx_trex_content\TX_WINDOWS_X86_64\support\setuplib.py", line 1360, in doItOrNot
    step(*args, **keyArgs)
File "E:\SAPDumps\tx_trex_content\TX_WINDOWS_X86_64\support\setuplib.py", line 2330, in registerstarter
    raise SetupException("registration of sapstartsrv FAILED with rc=%d" % (int(rc)))
SetupException: >>>ERROR:registration of sapstartsrv FAILED with rc=1
======================================================
END: 2010-04-22_13.10.23
installation ->FAILED
Please suggest what to do .
Rgds,
ankit

Diskspace Requirement for Trex Installation

Hi guys,
I just installed Trex server to one of our systems. It will be used for indexing and searching for our portal system which is running on another server.
While checking Trex 7.0 Installation guide, hard disk capacity took my attention.
On the server we installed Trex server, there is a free space of 30 GB. (Index, Trex and queue directory are on the same partition)
Our KM contains pdf and doc documents total size; 25 gb. In the guide it says; index directory needs approximately half as much disk space as the documents plus the same amount of disk space needed temporarily for the optimization and queue directory needs space approximately three quarters of the disk space required by indexes.
Calculation of disk space required;
For index directory; Permanent size = 25 / 2 = 12.5 GB
Temporary size = 12.5 GB
Total = 25 GB
For queue directory; 3 * 25 / 4 = 18,75 GB
Total space (index + queue) = 43,75 GB
So 30 gb space is not enough for this amount of document.
Is this true?
Any suggestions?
Tolga
Edited by: Tolga Akinci on Nov 25, 2008 9:14 AM

We were facing stability issues. Mapbox is a consultant solution and there's not that much documentation about the "internals", it runs as a Java application inside a J2EE engine and thus has all the implication that comes with that.
The behaviour of that version was indeterministic, mails didn't get through and there were so many places to check, why a certain mail was stuck.
You can run the Mapbox as part of J2EE on i5/OS but I can't state here anything about stability or issues, you'd better ask on the i5/OS forum here
Markus

TREX installation test error

Experts,
I've finished installing TREX on Unix and an attempting to run the Python installation check script:
runInstallationTest.py
I'm getting this error:
Traceback (most recent call last):
File "/usr/sap/TRX/TRX00/runInstallationTest.py", line 4, in ?
 from testbase import TestBase, TestError
File "/usr/sap/TRX/TRX00/testbase.py", line 6, in ?
 import fuzzypy
File "/usr/sap/TRX/TRX00/fuzzypy.py", line 897, in ?
 from _fuzzypy import *
ImportError: No module named _fuzzypy
1. I run TREXSetting.sh to set the environment.
2. I ensured my permissions and ownership are correct as sidadm.
3. I moved runInstallationTest.py, testbase.py, fuzzypy (directory with contents) and all other fuzzy* files I could find into my <trex_home> directory.
Here's the current directory listing:
-rwxr-xr-x 1 trxadm sapsys 11764 Sep 11 2006 build_ssl.sh
-rwxr-xr-x 1 trxadm sapsys 460 Sep 11 2006 TREXAdmin.sh
-rwxr-xr-x 1 trxadm sapsys 76 Sep 11 2006 scripts.lst
drwxr-xr-x 2 trxadm sapsys 256 Mar 12 14:12 sec
drwxr-xr-x 2 trxadm sapsys 256 Mar 12 14:12 log
drwxr-xr-x 3 trxadm sapsys 256 Mar 12 14:12 data
drwxr-x--- 2 trxadm sapsys 256 Mar 12 14:13 doc
-rwxr-x--x 1 trxadm sapsys 5630 Mar 12 14:14 TREX
-rwxr-x--x 1 trxadm sapsys 1350 Mar 12 14:14 TREXSettings.sh
-rwxr-x--x 1 trxadm sapsys 1091 Mar 12 14:14 TREXSettings.csh
drwxr-x--- 3 trxadm sapsys 256 Mar 12 14:15 cloneInst
drwxr-xr-x 12 trxadm sapsys 4096 Mar 13 08:43 exe
-rw-rr 1 trxadm sapsys 2617 Mar 13 10:38 dev_rfc.trc
-rw-rr 1 trxadm sapsys 160402 Mar 13 10:44 rfc835720_00001.trc
drwxr-xr-x 2 trxadm sapsys 4096 Mar 13 13:42 fuzzypy
-rwxr-xr-x 1 trxadm sapsys 60839 Mar 13 13:43 testbase.py
-rwxr-xr-x 1 trxadm sapsys 102748 Mar 13 13:45 runInstallationTest.py
-rw-rr 1 trxadm sapsys 51951 Mar 13 13:46 testbase.pyc
-rwxr-xr-x 1 trxadm sapsys 40666 Mar 13 14:02 fuzzypy.py
-rwxr-xr-x 1 trxadm sapsys 12758 Mar 13 14:02 fuzzyconst.py
-rw-rr 1 trxadm sapsys 38592 Mar 13 14:04 fuzzypy.pyc
drwxr-xr-x 6 trxadm sapsys 4096 Mar 13 14:20 nwkwcs
What am I missing?
Thanks for your help!
Jeff

Hello Experts.
SAP Global Support suggested the following for AIX ver 5.2:
hdodev01:trxadm 13> source TREXSettings.cshhdodev01:trxadm 14> /usr/sap/TRX/TRX05/exe/Python/bin/python /usr/sap/TRX/TRX05/exe/python_support/runInstallationTest.py
[1, 0.001] >> starting runInstallationTest (at Thu Jun 12 07:49:35 2008)
[1, 0.001] args: ()
[1, 0.001] keys: {}
 <--- INSTALLATION TEST SUMMARY --->
--> Check 01: Show Installation History
+-----------------+----
NR ││ TYPE ││ INSTALL DATE ││ SID ││ VERSION ││ BUILD
+-----------------+----
+-----------------+----
0 ││ install ││ 2008-06-08 13:48:07 ││ TRX ││ 7.0.06.00 ││ 7006000420
+-----------------+----
1 ││ update ││ 2008-06-10 13:22:31 ││ TRX ││ 7.0.41 ││ 7041000503
+-----------------+----
--> Check 02: Ping TREX Services
+--------+----
STEP ││ ACTION ││ SPECIFICATION ││ RESULT
+--------+----
+--------+----
01/04 ││ ping indexserver1 ││ host=hdodev01 port=30503 ││ OK
+--------+----
02/04 ││ ping nameserver ││ host=hdodev01 port=30501 ││ OK
+--------+----
03/04 ││ ping preprocessor1 ││ host=hdodev01 port=30502 ││ OK
+--------+----
04/04 ││ ping queueserver ││ host=hdodev01 port=30504 ││ OK
+--------+----
--> Check 03: Check TREX Web Site
+--------+----
STEP ││ ACTION ││ SPECIFICATION ││ RESULT
+--------+----
+--------+----
01/01 ││ check web site ││ post xml request ││ skipped
+--------+----
--> Check 04: Check Process size
+--------+----
STEP ││ ACTION ││ SPECIFICATION ││ RESULT
+--------+----
+--------+----
01/01 ││ Process size ││ cur = 2047MB > min = 1900MB ││ OK
+--------+----
--> Check 05: TREX Services and Third Parties Version
+--------+----
COMPONENT ││ COMPONENT_VERSION ││ COMPONENT_BUILD ││ CHANGE_LIST
+--------+----
+--------+----
indexserver1 ││ 7.00.41.00 ││ 700.41.144682 ││ 144682 (700_REL)
+--------+----
nameserver ││ 7.00.41.00 ││ 700.41.144682 ││ 144682 (700_REL)
+--------+----
preprocessor1 ││ 7.00.41.00 ││ 700.41.144682 ││ 144682 (700_REL)
+--------+----
queueserver ││ 7.00.41.00 ││ 700.41.144682 ││ 144682 (700_REL)
+--------+----
PYTHON ││ 2.4 ││ 216 ││ ---
+--------+----
FILTER ││ 8.2.0 ││ --- ││ ---
+--------+----
LEXICON ││ 3.7.3 ││ --- ││ ---
+--------+----
--> Check 06: Check TREX Healthiness
+--------+----
STEP ││ ACTION ││ SPECIFICATION ││ RESULT
+--------+----
+--------+----
01/20 ││ clean up index ││ clean up indexId = abc ││ OK
+--------+----
02/20 ││ create index ││ create indexId=abc ││ OK
+--------+----
03/20 ││ processing file ││ content of www.python.org ││ OK
+--------+----
04/20 ││ processing file ││ content of www.pythonware.com ││ OK
+--------+----
05/20 ││ processing file ││ content of python.oreilly.org ││ OK
+--------+----
06/20 ││ processing file ││ content of www.jython.org ││ OK
+--------+----
07/20 ││ exact search ││ query = ['jython'] ││ OK
+--------+----
08/20 ││ fuzzy search ││ query = ['jyto'] ││ OK
+--------+----
09/20 ││ linguistic search ││ query = ['questions'] ││ OK
+--------+----
10/20 ││ clean up index ││ clean up indexId = abc ││ OK
+--------+----
11/20 ││ create index ││ create indexId=queueId=abc ││ OK
+--------+----
12/20 ││ set queue parameter ││ bulkIndex=bulkOptimize=4 ││ OK
+--------+----
13/20 ││ processing file ││ content of www.python.org ││ OK
+--------+----
14/20 ││ processing file ││ content of www.pythonware.com ││ OK
+--------+----
15/20 ││ processing file ││ content of python.oreilly.org ││ OK
+--------+----
16/20 ││ processing file ││ content of www.jython.org ││ OK
+--------+----
17/20 ││ wait processing ││ elapsed time: 14.021 sec ││ OK
+--------+----
18/20 ││ exact search ││ query = ['jython'] ││ OK
+--------+----
19/20 ││ fuzzy search ││ query = ['jyto'] ││ OK
+--------+----
20/20 ││ linguistic search ││ query = ['questions'] ││ OK
+--------+----
-> Test Script Error Count: 000
hdodev01:trxadm 15>

Does Job scheduling functionality in EP 6.0 SP11 needs TREX installation??

Hi Friends
We're on EP 6.0 - SP11, we're implementing ESS on our portal environment, initially we planned for portal installation without the KM & TREX, now there is a requirement for our project due to which we need the job scheduler within EP 6.0 to schedule jobs, understand for that we need to install KM. Going through the "Installation of SAP EP on WAS 6.40" guide it looks like we need to install TREX as well if we want to install KM, can somebody confirm?, TREX will definitely consume much hardware resources & actually we don't need the search capabilities, all we need is the job scheduler. So appreciate if somebody can confirm if we need to install just the "Content Management & Colloboration" or we need to install TREX as well.
Thanks & Rgds,
Abhishek

Yes, the Scheduler service is part of CM and no TREX isn't required by the Scheduler service. TREX is mainly used as Search & Classification in KM.

Post-Steps TREX-Installation: Problem adding HttpServer

Hi, well i opend everything like said in Link
http://help.sap.com/saphelp_nw70/helpdata/EN/46/bab1d48b0a1514e10000000a114a6b/frameset.htm
The Problem is that i have no Landscape Connectivity in the TREX-ADMIN Tool.
I have Landscape/Services and there all service are listed like indexserver, queueserver and also httpserver but this is with red flag.
So how to add user and password to this httpserver-service OR where do i have to configure this!
br

Hi
Did anyone answer this question about finding the ume.r3.connection.master.client? We are in the same situation. Cannot find it and only see the ones listed below when we go to the config tool.
I have checked Configtool (Instance>Server>Services-->com.sap.security.core.ume.service
I couldnt find the parameter(ume.r3.connection.master.client)
I can see the following parameters that start with (um.r3.connection.................)
ume.r3.connection.master.PartnerLDAPActive
ume.r3.connection.master.PartnerLDAPAdminPassword
ume.r3.connection.master.PartnerLDAPLogonAttribute
ume.r3.connection.master.PartnerLDAPServerID
ume.r3.connection.master.RFCDestination
ume.r3.connection.master.RFCDestinationForChanges
Thanks for your help
Debbie

TREX installation on IIS5.1 on Windows XP

HI All
I have installed TREX on window XP having IIS5.1 but in SAP MMC sapccmsr is not running, I search on internet that there must be Application Pools with IIS server which only come in IIS6.x , It comes with Windows 2003 server while my machine is having on Windows XP.
Can anyone help me in configuring the TREX on windows XP with Apache?
Thanks for your help...
With regards
Manu Sharma

Hi,
TREX is not supported on window XP. Check PAM on service market place.
Thanks
Sunny

Trex installation

Similar Messages

Maybe you are looking for