Trex Setup in E-Recruiting
Hi Community
We have set up E-Recruiting 600 and have followed the img path for setting up the Search Engine e.g. T-Rex connection and so on. Technically, everything is running fine. All the necessesary RFC Connections work, we are able to create an index with the respective HR_KW documents and a queue is being created in T-Rex which is being parsed/indexed all 30 minutes. So far so good.
Unfortunately, there cannot be found any document in the index. Clicking the button "Indexed documents" in Transaction SKPR07 shows that there are two index classes containing up to 82 documents. If we test the search by clicking "Test Search" using a wild card (*) for document class HR_DOC, no document is being found although there should be at least 80 of them.
What could be a possible reason for that symptoms?
Points will be rewarded!
Hi Alexander,
On of the possible reason could be check, whether you have anonymous user is created.
The setting of the note 685521 is maintained in your system or not
i.e. transaction SICF -> select "External aliases" and "default_host" ->
there should be external alias: /sap/bc/contentserver.
Also please check the index category is created properly.
Best Regards,
Deepak...
Similar Messages
-
TREX Conig for E-Recruitment System ?
Do you have any useful info fo TREX Configuration in a E-Recruitment System ?
RgdsSiddesh......T h a n k s ........M a n......for your replies....
Really what i want to say thru that message number is - i followed the same - but i was not succeed to use TREX in e-Recruitment system.
The error is - The indexed docuemnts are not poping up / traced up in a general search of e-Rec scenario.
For the same i am requesting you all experts - end to end config step by step - in TREX Server and e-Recruitment Server.
Rgds -
Hello all,
I have a question regarding a service in an abap engine:
I have configured a trex engine for e-recruitment and I am getting an error code 8002.
if it happens in a java engine I now that you have to configure a java service called URL Generator service, in that service you have to put the hostname. is there a similar thing in abap?
did anyone encounter the problem?
Thanks
AsherThe problem could be that the pre-processor loads the documents and performs preliminary parsing/analysis on the document before the index server can get to work on it. The URL generated will be used to load the documents and must have sufficient information else the pre-processor fails.
You might need to have a look at the following links for possible soultions depending on your situation:
/thread/346637 [original link is broken]
http://help.sap.com/saphelp_nw04/helpdata/en/7d/236cfa17034a37a439dc392ec59eb0/frameset.htm -
Hi,
I have got the TREX setup done by my basis team. I have also configured the Talent group in ECC portal.
I also have some of the applicants assigned to the talent groups.
But still i could'nt get the search options working in E-rec Ex:- Job search for vacant positions from the Applicants login.
Can someone provide information on what could be the other missing steps to make the T-Rex functionality work in E-rec
Thanks
V T GopalrajWell,
what Deepak means is the field "published" in that table.
Each posting is marked in T77RCF_EXT_PUB or T77RCF_INT_PUB for indexing. If indexing was successful, that published flag is set to X.
If it is not set to X (start_date and end_date need to be current), then you probably forgot to run report RCF_PERIODICAL_SERVICES periodically.
First check if Report is running periodically. The check the notes I sent you.
Regards -
Issue in TREX 7.1_62 installation on Linux
Hello,
I am trying to install TREX 7.1_62 on Linux server.
I put /sapmnt as my installation location in sapinst.
While installing TREX instance the installer is terminating with below log:
_install.log
Traceback (most recent call last):
File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/setuplib.py", line 5013, in createLinked
os.symlink(link[1], link[0])
OSError: [Errno 17] File exists
Action: Creating directory structure for SAPSID D82, Instance 00 -- failed.
Exception description:
Traceback (most recent call last):
File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/_install.py", line 1340, in installInstance
self.memberInstallStatus.doItOrNot(self.memberSarTrek.createdirs)
File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/setuplib.py", line 5857, in doItOrNot
step(*args, **keyArgs)
File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/setuplib.py", line 2542, in createdirs
self.ds.createLinked()
File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/setuplib.py", line 5016, in createLinked
raise SetupException("failed to check/create link %s -> %s!" % (link[0], link[1]))
SetupException: >>>ERROR:failed to check/create link /usr/sap/D82 -> /sapmnt/D82!
############ >>>ERROR:failed to check/create link /usr/sap/D82 -> /sapmnt/D82! - TREX setup cannot proceed.
Exception description:
Traceback (most recent call last):
File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/_install.py", line 3562, in main
Installer().mainTrexAction()
File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/_install.py", line 703, in mainTrexAction
self.installInstance(step)
File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/_install.py", line 1379, in installInstance
framework.error(str(e) + " - TREX setup cannot proceed.")
File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/_install.py", line 3472, in error
raise ErrorException(self.errorMarker + text,result=1)
ErrorException: <__main__.ErrorException instance at 0x7f4cfda6bd88>
* === Script execution resumee === *
* Step 1: Preparation and checks before TREX system installation : SUCCESS
* Step 2: TREX system installation : FAILED
* Script execution terminated at 2015-04-03_08.33.35 with error 1
I tried to use other locations like /usr/sap/D82 as installation location, inthat case it tries to create link like
/usr/sap/D82/D82 --> /usr/sap/D82
My server has /sapnt/D82 and /usr/sap/D82 as separate mount points.
/dev/mapper/vg_dd82-lvusapd82_3
47G 1.1G 46G 3% /usr/sap/D82
/dev/mapper/vg_dd82-lvusapd82_4
4.7G 139M 4.6G 3% /usr/sap/SMD/SMDA90
itsusravmdd05.jnj.com:/vol/itsusravmdd05_btb/btb_fsrf_sapmnt_d82
25G 0 25G 0% /sapmnt/D82
I dont understand why installer is trying to create a softlink between
/sapmnt/D82 and /usr/sap/D82
Please share any information you guys are having.
Thanks & Regards,
TejasHey Tejas,
All my installations (>= 7.10.57.00) are running fine in /usr/sap/>SID> for years now.
http://help.sap.com/saphelp_nwes72/helpdata/en/45/6ddd60fe7b40bfe10000000a1553f7/content.htm
I seem to recall on TREX 7.0 that it installed into /sapmnt and /usr/sap/<SID>
Cheers,
Amerjit -
TREX not working in CV04N but works in SKPR07
Hi there
I don't normally get too involved in TREX setup (I normally hand it over to basis) but this time I've been dragged into it. We have a problem where the TREX is configured and is working. If we go to SKPR07 and index, it works and we can do searches from SKPR07 and it returns the results from the content of the file, however, when we attempt to do a search in CV04N in text search, it doesn't return any results at all.
Any ideas?Hi Athol,
Initially you don't find the text search field atall,
Please check the steps:
1. Go to SKPR07 in tools tab select "DMS_PCD1" in document class field & docarea field with DMS
2. go to edit in the same Tcode and select Administration, you get popup screen fill Management table field with "DMS1DISTA"
3.Tick "Create indexing readiness" and "indexability of the class" options.
4.Click on "Index able Attributes" you get the sub-screen select all or required once.
5.There are two ways of scheduling indexing jobs, ABAP Program is "RSTIRIDX" Tcode SM36
6.after selecting in the TCode SM36 click on "job wizard" icon.
After doing this above steps,
You can check the CV04N you can find the field "SerchTxt"
Hope this will solve your problem
Regards
Rehman
Reward Points if useful -
E-Recruitment Search Not working. INDEX Error
Dear experts
We found E-Recruitment Search is not working.
Later we found in TREX Server, Under Index
we see the index crteated by E-Rec System in Red Color Radio Button.
What is mean?
How it would have happened?
How to correct this ??
Please Help
RgdsThe useful note to check the all was
1082004 - TREX 6.1/7.00: TREX configuration for E-recruiting
Infact, After making the complete reboot, it started working amazingly,
Rgds -
Hi SDN,
need help to installation & configure TREX search functionality in E recruitment .
Does anyone have any documentation or steps to configure it.
It would be great if you could pas me on the steps to configure TREX in E recruitment.
if anyone have a step by step installation of Trex installation for E-recutment pl. send .
what is the process if i want use this server via internat, how i can acess the our search engine.
Any help would be greatly appreciated.
Regards,
RaviSiddesh......T h a n k s ........M a n......for your replies....
Really what i want to say thru that message number is - i followed the same - but i was not succeed to use TREX in e-Recruitment system.
The error is - The indexed docuemnts are not poping up / traced up in a general search of e-Rec scenario.
For the same i am requesting you all experts - end to end config step by step - in TREX Server and e-Recruitment Server.
Rgds -
Error during trex installation
hello experts,
while doing trex 7.1 revision 38 installation in windows x64 server, following error is coming :
Deploying binaries (sapcpe)
>>>ERROR:execution of sapcpe FAILED with rc=1 - TREX setup cannot proceed.
======================================================
END: 2010-04-20_13.05.38
installation ->FAILED
see also logfile: C:\Program Files\sapinst_instdir\TREX\install\trex_install_2010-04-20_13.03.37\install.log
From
C:\Program Files\sapinst_instdir\TREX\install\trex_install_2010-04-20_13.03.37\install.log :-
Deploying binaries (sapcpe)
E:\usr\sap\TR1\SYS\exe\nuc\ntamd64\sapcpe pf=E:\usr\sap\TR1\SYS\profile\TR1_TRX02_inblrjaldbm list:E:\usr\sap\TR1\SYS\exe\nuc\ntamd64\trexbin.lst stdoutput >"C:\Program Files\sapinst_instdir\TREX\install\trex_install_2010-04-20_13.03.37\sapcpe_out.log" 2>&1
>>>ERROR:execution of sapcpe FAILED with rc=1 - TREX setup cannot proceed.
Exception description:
Traceback (most recent call last):
File "E:\SAPDumps\tx_trex_content\TX_WINDOWS_X86_64
support\_install.py", line 399, in install
installation.doItOrNot(installation.runsapcpe, description="Deploying binaries (sapcpe)")
File "E:\SAPDumps\tx_trex_content\TX_WINDOWS_X86_64\support\setuplib.py", line 1360, in doItOrNot
step(*args, **keyArgs)
File "E:\SAPDumps\tx_trex_content\TX_WINDOWS_X86_64\support\setuplib.py", line 2392, in runsapcpe
raise SetupException("execution of sapcpe FAILED with rc=%d" % (int(rc)))
SetupException: >>>ERROR:execution of sapcpe FAILED with rc=1
======================================================
END: 2010-04-20_13.05.38
installation ->FAILED
see also logfile: C:\Program Files\sapinst_instdir\TREX\install\trex_install_2010-04-20_13.03.37\install.log
This is the latest revision of trex that we are installing. Please suggest what should be done.
Thanks,
AnkitHi,
I ahve renamed the folder inblrjaldbmbackup to inblrjaldbmbackup_old.. After continuing the installation, it created another inblrjaldbm~backup folder. Then i renamed the folder to inblrjaldbm and i got this new error.:-
From install.log :-
_install.py
Action: install
SID: TR3
Instance: 10
Host: inblrjaldbm
Target: e:\usr\sap
Domain: inblrjaldbm
Persistence layer: fileSystem
======================================================
Logdir is C:\Program Files\sapinst_instdir\TREX\install\trex_install_2010-04-22_13.01.33\trex_install_2010-04-22_13.10.23
======================================================
TREX [7.10.38.218026] for [ntamd64]
======================================================
BEGIN: 2010-04-22_13.10.23
checking local administrators
SAP Instance D7S 01 DVEBMGS01
DVEBMGS D7S 01 E:\usr\sap\D7S E:\usr\sap\D7S\DVEBMGS01 other None None None None None
SAP Instance DM2 00 DVEBMGS00
DVEBMGS DM2 00 E:\usr\sap\DM2 E:\usr\sap\DM2\DVEBMGS00 other None None None None None
profile path could not be resolved for system TR2 02
trex TR2 02 E:\usr\sap\TR2 E:\usr\sap\TR2\TRX02 DI None None None None None
trex TR3 10 E:\usr\sap\TR3 E:\usr\sap\TR3\TRX10 CI None None None None DEFAULT
Cocktail is: TREX_ALONE
Installing Version: 7.10.38.218026
SystemType is UNDEFINED
IntegratedSystem: False
saploc points to E:\usr\sap
overwriting invalid system location with E:\usr\sap
host : inblrjaldbm
platform : ntamd64
sid : TR3
systemloc :E:\usr\sap
globalSystemLoc :E:\usr\sap\TR3\SYS
instance : 10
instanceloc:E:\usr\sap
getSysDir : E:\usr\sap\TR3\SYS
getSystemDir : E:\usr\sap\TR3\SYS
getSysExeDirAbs : E:\usr\sap\TR3\SYS\exe\nuc\ntamd64
getGlobalDir : E:\usr\sap\TR3\SYS\global
getProfileDir : E:\usr\sap\TR3\SYS\profile
getGlobalInstallDir : E:\usr\sap\TR3\SYS\global\trex\install
getGlobalSupportDir : E:\usr\sap\TR3\SYS\global\trex\install\support
getGlobalSystemDir : E:\usr\sap\TR3\SYS
getCfgdirName : inblrjaldbm
======================================================
CONTINUE installation
from here: C:
Program Files
sapinst_instdir
TREX
install
trex_install_2010-04-22_13.01.33
======================================================
======================================================
SarTrek.registerstarter -
Registering Service sapstartsrv and starting TREX
E:\usr\sap\TR3\TRX10\exe\sapstartsrv.exe -r -q -p E:\usr\sap\TR3\SYS\profile\TR3_TRX10_inblrjaldbm -s TR3 -n 10 -U inblrjaldbm\SAPServiceTR3 -P ********* -e inblrjaldbm\tr3adm >"C:\Program Files\sapinst_instdir\TREX\install\trex_install_2010-04-22_13.10.23\sapstartsrv_reg.log" 2>&1
>>>ERROR:registration of sapstartsrv FAILED with rc=1 - TREX setup cannot proceed.
Exception description:
Traceback (most recent call last):
File "E:\SAPDumps\tx_trex_content\TX_WINDOWS_X86_64
support\_install.py", line 429, in install
installation.doItOrNot(installation.registerstarter, args=[options.password], description="Registering Service sapstartsrv and starting TREX")
File "E:\SAPDumps\tx_trex_content\TX_WINDOWS_X86_64\support\setuplib.py", line 1360, in doItOrNot
step(*args, **keyArgs)
File "E:\SAPDumps\tx_trex_content\TX_WINDOWS_X86_64\support\setuplib.py", line 2330, in registerstarter
raise SetupException("registration of sapstartsrv FAILED with rc=%d" % (int(rc)))
SetupException: >>>ERROR:registration of sapstartsrv FAILED with rc=1
======================================================
END: 2010-04-22_13.10.23
installation ->FAILED
Please suggest what to do .
Rgds,
ankit -
Using TREX in SAP Solution Manager
Dear all,
I want to setup TREX for document search purpose in my SAP Solution manager system.
There is already TREX installed on another system, & I have setup the connection between solution manager & TREX.
My question is , in order to use TREX for document search , I need to connect solution manager to Knowledge warehouse?
is this true?
why can't we use TREX to search document in SAP Solution manager, BUT to use functions of SAP Knowledge Warehouse 6.0 or SAP Knowledge Provider, to store documents?
and anyone can show me more detail documentation about the configuration?
thank you very much to share!
kellyHi Kelly,
You can have a look into the SAP Solution Manager system and there you can call transaction SPRO. You find information for TREX installation with the path:
Solution Manager Implementation Guide ->SAP Solution Manager -> Configuration -> Cross Scenario Settings -> TREX Setup
Best regards,
Veit. -
Issue with search criteriya in E-Recruiting
Hello, Experts! I used ERECRUIT - 603(EHP3) and Trex Version -
7.10.12.00.
Issue with search publications in WebDynPro interface and
BSP interface for candidate, when i use criteria for search
(like Country, or Function Area or other...). When i use a full-
text search or with out criteria is everything good -
publications are find. In the TRM is every think good, with
search criteriya or full-text search or with out criteriya. This
problem only with publications search.Hello,
Ensure you have scheduled the periodical services job RCF_PERIODICAL_SERVICES and check the tables T77RCF_EXT_PUB & T77RCF_INT_PUB in which your publications need to have a valid indicator (an "X" indication).
If even after running the periodical services job, you are not able to view the postings, possibly there is some problem in your TREX setup and you can know where u went wrong by checking the log in SLG1 T-code.
Best Regards
G Raj -
Hi SDN,
Below are the Trex Scenarion for E-recuriting.
Our prodution server and Trex servers are differents.
We want connectivity from Internet for search from external environment ( From web).
1.kindly suggest, where i have to made the changes ?
2.Which port is used to connect from web ?
3.I want the connectivity configration details. ?
4.Whether the http works for external connectivity for accessing the Trex server ?
where i want to change this settings on trex server or prodution server.
Please suggest.
Thanks.
RaviSiddesh......T h a n k s ........M a n......for your replies....
Really what i want to say thru that message number is - i followed the same - but i was not succeed to use TREX in e-Recruitment system.
The error is - The indexed docuemnts are not poping up / traced up in a general search of e-Rec scenario.
For the same i am requesting you all experts - end to end config step by step - in TREX Server and e-Recruitment Server.
Rgds -
Hi Experts,
Please help me out on TREX Setup.
System Set up- EHP 7 with Data Base HANA.
Scope is TMS, E-Rec.
In TMS i came across information on TREX for Talent Search which is effectively handled by TREX..
1/ Now to have TREX do we need to have a deifferent Server & connect it to SAP Server?
2/ Can we built it on the same Server?
3/ We are planning to make Partition in SAP Server for E-Rec & shall we built TREX on that.
Please provide some insight into the same.Hi,
I tried to explain it before.
For all TMS scenarios you need TREX!!. I try it in other words again: If you logon as a TMS to the Enterprise Portal and navigate to the Talent Information which is the most common used entry point for the TMS, you first have to execute a search. If there is to TREX installed you will get an error message. There is no chance to go deep into talent data of a special amployee.
TREX is installed on a different server, because it is an other technology. On TREX instance can be connected to different ABAP Instances.
TREX is not ony holding indexes to the HR data. All HR data is transferred to TREX.
Enterprise search/Embedded Search is part of your Netweaver application server. This is some kind of middelware between TMS frontend and TREX. It is responsible indexing the data (to TREX) and executing the queries.
Hope that helps..
br
Martin Hastik -
Hello gurus,
I am going to be working on monitoring TREX (used primarily with e-recruiting). There is a TREX server installed up and running and I want to work on monitoring it and troubleshoot any issues that may arise. I wanted to ask you all to help me out with this. Do you have any recommendations on how to keep the TREX performance high and monitor it for any problems and troubleshoot the issues that may arise...
Is there any guide for this and if there is one, please point me to the guide and also please let me know your suggestions and recommendations for monitoring the performance of the TREX. I basically am looking in the point of how to monitor the indexes.
I am also getting an error "Index is temporarily not available. Index = ses: xx_xxxx_xx_xxx_ne error 2972 index state idle. I am seeing this error in index admin. In Index landscape, I am seeing a lot of corrupt indexes.
Could anybody please help me fix this issue for the client?
Any suggestions/recommendations?
Thanks much for all your help in advance,Hello,
Our TREX is with E-recruiting and not the portal. I would like to know where is the place to monitor indexes if the trex is connected to the e-recruiting? If it is portal, we go to the system admin -> system config etc.... I do not know where is the trex index monitoriing if it is erec... Could you please let me know?
Also, is there a way to turn on the master index server and turn off the slave index server?
Thanks gurus,
MK -
ERMS: Issue with setting up charset
Hi Experts,
We are using CRM 6.0 ERMS to send out emails to customers. Based on the Setting in transaction SCOT all the out going emails are sent with UTF-8 charset (Code Page: 4110). Today Japanu2019s internet mail standard is ISO-2022-JP, and most of mail applications have an option to encode outgoing message to JIS. However, all outgoing message from ERMS are UTF-8 (Unicode) without capability to encode other character code. This will result in Japanese mail message broken in most of webmail clients in Japan such as MSN Hotmail.
Has anyone faced this issue before. Can we achieve the funtionality wherein Japanese Code page gets selected based on the customers BP language?
Regards,
NamitaThe language for the outgoing ERMS email is determined first by content analysis by TREX (some customers may choose not to set up TREX). If this determination fails the language of the BP is taken into account . If the BP determination fails, the system language of the WF-BATCH user is taken .
From the logic above if the Content Analysis succeeds the Japanese language is set for the email.
We can check the Clasification/Trex setup to make sure that for an email received in Japanese for example the language is recognized.
As an example you can test/debug by following the steps below
1 Send an email in Japanese that will trigger auto acknowledge (need to create a mailform with Japanese text to use in auto acknowledge) .
2 In swi1 look for the background task id corresponding to the ERMS mail
3 Set a breakpoint in class CL_CRM_ERMS_ADD2FB_CA method
IF_CRM_ERMS_SERVICE~EXECUTE line 77
IF error_code <> 0.
CONCATENATE 'TREX error:'(001) error_text '[' 'error code = ' msg
']' INTO msg.
RAISE EXCEPTION TYPE cx_crm_erms_service_failed
If error returned is not 0 means that either there is a problem with TREX or it just could not decide based on the content. However normally it should recognize the language. (Watch variable xml_chunk - at the end
of the XML there is a language tag that should have some value 'DE'
'EN' etc)
4 Run program CRM_ERMS_LOGGING. For workitem id enter the id of the
background task from step 2
5. The program stops at the breakpoint mentioned above.
6. Also note that if the language is detected correctly you need also the mail form that is used to be translated in that language ( Japanese ).
The language of the email overwrites the SXCPSEND entry (language to codepage mapping)
To sumarize:
1. Check if clasification/bp detects the language
2. Mailform is translated in Japanese
3. Mapping for codepage is maintained in SapConnect (SXCPSEND language to codepage mapping)
I hope these steps will help the investigation.
Maybe you are looking for
-
Though i cleared GL by F.13, still in fbl3n report items are showing in red
Hi Experts, Though i cleared the gl line items up to the date through f.13,but when i run the fbl3n report up to the date, items are showing in red.& balance is zero.please advice
-
Moving file from Target to Archive Directory
Hi All, My Scenario is that we have a .txt file in Target directory in SAP PI (AL11) and when an arching Script is run this file is moved from Target folder to Archive Folder and also uploaded in R3. Now the requirement is that the file is transffere
-
I upgraded to Mavericks and can't get my Epson Perfection 4990 scanner to work. I had gotten it to work with a driver I downloaded from EPSON with Mountain Lion
-
Quick Reply Please?!?
Hey ok so i got my UM-2ex to work in Garageband.. with my electronic drums and my keyboard bnoth work.. BUT in logic express 7.. it kinda of works.. i think it is.. so im recording o nmy keyboard... it shows the ntoed coming up and it shiows what not
-
The win7 media player has suddenly dumped all of the albums and song lists I count on. It appears that the music is still in the My Music folder but totally without organization and there are a lot of unknown and empty albums. 80% of the content i