Tried to install iOS 7 and it said I needed to connect my phone to iTunes, so I did and then it said my phone wasn't updated to the software now my phone isn't working!
Tried to install iOS 7 and it said I needed to connect my phone to iTunes, so I did and then it said my phone wasn't updated to the software now my phone isn't working! all it's doing is showing a iTunes logo with a charger thing under it and won't let me cancel or anything
After connecting your iPhone to the computer did you restore using the iTunes on your computer?
Similar Messages
-
Iv been trying to sync new apps I downloaded on my ipad2 and it isnt syncing. when I connect my ipad to itunes on my PC and click on the APPS tab I can see the apps on the PC but they are greyed out
Do you have restrictions enabled on your iPad? Go to Settings>General>Restrictions and see if you have it turned on. If so - see if you have installing apps turned off. If you do, turn restrictions off on your iPad and that may do it for you.
-
phone will not work after automatic download of ios7.6
You mead iOS 7.0.6, right?
See this:
iOS: Unable to update or restore -
I tried to install iOS 7 and now my phone won't turn on?
Well, around 3 hours ago I tried to install iOS 7. It said I didn't have enough space so I deleted mostly all of my apps, all my music, all my photos and all my videos. It then said I had enough space so I went to install it. It kept saying error over and over again so I tried restarting my phone (which is an iPhone 4) and then it went all wrong. It just stayed on the Apple logo and never went off it. I asked around and I was told to do a hard reboot (I hold down the off and home button for 10 seconds, then lift my finger off the off button until the logo comes on again and links with my iTunes). I did this and it linked with my iTunes but it won't download iOS 7 from it (it says it has "40 hours remaining" or something ridiculous but doesn't budge - it wants to download iOS7 from iTunes when I am trying to recover my iPhone) because after waiting for a while, an error pops up. It's just a vicious cycle with nothing at all changing and it's really annoying me now. Can anyone help? It's getting late and I *REALLY* need this phone for tomorrow.
Please help me.The phone is in recovery mode. See this support document for instructions on what to do. http://support.apple.com/kb/HT1808
-
i am trying to watch a movie using my appve TV, but i am asked to verify 'payment' info on itunes store. i have updated everything using the 'edit' button, it still isn't working and i am frustrated, 6465107522
perhaps this will help?
h t t p://w w w.aone-soft.com/mobile_3gp_video_converter.htm
or do a google search on "mobile_3gp_video_converter"
Message Edited by JSanders on 11-18-2008 09:43 AM
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Having a problem with my ipad... I tried to install ios and the ipad has frozen
I am having a problem with my Ipad air. tried to install ios and my ipad has frozen
Click here and follow the instructions.
(124611) -
The sound on my iPhone isn't working I don't understand why it was working fine an hour ago I haven't dropped it or anything simply just out it on silent... The music I was trying to listen to didn't want to make a sound when I turned it in , I put a pair of headphones in and and it worked as soon as I took it off it completely stopped the music was playing still I could see it in the top column that the play button was on ... Then I made a call an the same thing happened I turned it on speaker and then I could hear them... The sound is completely off even tho i looked at the seettings and put the volume on high noting is sounding on its own not even when i tap the buttons... I took it off the silent before I tried this stuff I don't understand please help !!!
make sure that your head phones are not attached to the phone then use the volume buttons on the side, if when using them you see a pic of headphones on the screen, then you have some lint in the headphone jack, use some compressed air and blow it out.
If you dont see that then try to reset the phone, hold down the home and power buttons for 20 seconds or untill you see the silver apple.
If you are still having a problem restore the phone and set up as new to see if that clears it up.
http://support.apple.com/kb/ht1414 -
Trying to turn the background black and white in lightroom 5. Using the adjustment brush. It isn't working.
Set Flow and Density of the brush to 100
Reduce it where you want the effect to blend.
Bruce -
....desperating trying to install itunes 10.7, but it asked me to install Mac OS X 10.6.8. I did, but then it said that I needed to install Java for Mac OS x 10.6. I did that and now it keeps saying 'this update requires Mac OS X version 10.6??
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply.
Actually, you cannot download Snow Leopard. You downloaded a Snow Leopard updater. -
i tried to install ios 7 in macbook pro and the error 3 persist. phone is in the recovery mode
Try on a different computer. If you get this error again, go to an Apple store or call AppleCare. I've only seen this error once, & I was unable to solve it. Took the phone to the genius bar & they replaced the phone.
-
I am trying to install iOs 5.1 on myiPad but when I go to 'General' to 'Settings' the link 'Software update' is not visible. Any advice would be welcome.
This feature is only available on iOS 5 or later. You must still be running iOS 4. Connect your iPad to the computer you usually sync with and run iTunes software update.
-
I am trying to install iOS 6 on my IPAD2 but none of the screens that are displayed are what is on my IPAD.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
i tried updating my iphone 4s to the ios 7 but it said error with the firmware now my phone is stuck in recovery mode and i have no idea how to fix it any suggestions??
Try Restoring it 3 times in a row and see if that works.
If not that error can indicate one of two things: Your iPhone was at one time jailbroken, had the iOS version rolled back, or ran an unauthorized beta and if none of those things are true it is a hardware error. -
I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?
Hi there KrisonCastillo,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
I tried to install IOS 5.0. It crashed and now my Ipad is dead !
I tried to install IOS 5.0. It crashed and now my Ipad only shows an Apple icon being busy. iTunes could not connect to it due to unknown device(OxE8000065) and it has been like this for a long time now ...
Do I leave it as is, or kill it off, and if the latter, how do I do it?Unable to Update or Restore
http://support.apple.com/kb/ht4097
Maybe you are looking for
-
Disk Problems, OSX partition will not repair is Windows CHKDSK the culprit?
Hi, I have both Snow Leopard (fully updated) and Windows 7 on Bootcamp partition on my MacBook Pro. Repairing Permissions on my Mac OS 10.6.4 partition had become a very regular with 'Java' permission problems always seeming to be a very regular and
-
No application registered for the message - when using Proxy !
I am using ABAP Proxy to sent my messages from legacy to SAP R3. All my settings seem to be okie. But I get this message and the error log says 'The application that implements the inbound interface could not be called. The error is not specific to t
-
My itunes is not working correctly. can i delete and reinstall without losing my music
My itunes is not working correctly. can i delete and reinstall without losing music?
-
PHP/MySQL DW8 login not working in IE6
I built an backend admin for my site and for some reason it will not login using IE6. It works fine with the following MAC (safari. firefox, IE0 PC (Firefox, Netscape) I was wandering is this is a know issue with IE or IE6? If anyone needs to see my
-
Problem in dropping primary key
Hi, I have table EMP which has a primary key on EMPNO column. I want to drop the primary key with the below statement: "alter table emp drop primary key" It's showing error as "ORA-06502: PL/SQL: numeric or value error: character string buffer too sm