Tried to install yosimete software and now my MAC Pro won't work

Yosimete software won't install

Yes I was upgrading from 10.6 to 10.10.
Says OS X could not be installed on your computer.
File system verify or repair failed.
Quit the installer to restart your computer and try again.
I did all that a couple of times and still won't work.

Similar Messages

Installed itunes 6 and now CD/DVD drive won't work at all

I just bought a new ipod and installed the software and now my CD/DVD drive won't work at all. Here is my info: Could someone please help!!!
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Inspiron 5160
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: ASAPIW2K (6.0.2.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce FX Go5200 \GeForce FX Go5200
IDE\DiskFUJITSUMHT2080AH_______________________006C___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYDVD+-RW_DW-D56A____________________PDS7___, Bus Type ATA, Bus Address [0,0]
SCSI\CdRomROXIO__DVD-ROM_EMULATOR___, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY DVD+-RW DW-D56A, Rev PDS7
Drive is empty.
E: ROXIO DVD-ROM EMULATOR, Rev
Drive is empty.
If anyone has a solution for this stupid problem that would be great.
Thanks

Yes, I suspect that it's the virtual drive emulator software you have there. I know nothing about that software and it doesn't look like the Roxio support page even mentions it, so it's probably software old enough that they're not supporting it anymore.
To uninstall any software, I would start with the "Add and Remove Programs" Control Panel. Uninstall it there, and then use the Microsoft Installer Cleanup Utility —
http://support.microsoft.com/default.aspx?kbid=290301
Download and install that. Run it and find the drive emulator software on the list and remove it there. And reboot and see if that has successfully removed it.
There is a work around that if we just remove the iTunes CD driver, you'll probably get your drive back, but you'll only be able to rip CDs, you won't be able to burn them without the iTunes CD driver installed. You do have some Pinnacle CD burning software installed. Are you currently using that or is that leftover cruft as well?

Installed Logic Express 8, now my Mac Pro won't start

I got a brand new Mac Pro about a week ago. It appeared to work fine until last night. I powered it on, installed a brand new copy of Logic Express 8 on it, shut it down, and now the Mac Pro can't finish starting up (stays forever on the gray screen with the apple and the progress indicator).
Has anyone experienced a similar problem caused by Logic, or is it just a coincidence?
(The complicating factor is that the very first thing I did when I got the Mac Pro was to install M-Audio's driver for the ProjectMix I/O. This is the only driver I've added. It's not officially supported on Leopard. But it didn't affect the Mac's ability to boot for the first week, so that would seem to put it in the clear.)

I got a brand new Mac Pro about a week ago. It appeared to work fine until last night. I powered it on, installed a brand new copy of Logic Express 8 on it, shut it down, and now the Mac Pro can't finish starting up (stays forever on the gray screen with the apple and the progress indicator).
Has anyone experienced a similar problem caused by Logic, or is it just a coincidence?
(The complicating factor is that the very first thing I did when I got the Mac Pro was to install M-Audio's driver for the ProjectMix I/O. This is the only driver I've added. It's not officially supported on Leopard. But it didn't affect the Mac's ability to boot for the first week, so that would seem to put it in the clear.)

I was installing mountain lion and now my macbook pro won't start up

I was installing Mountain Lion and i restarted my computer and now it won't boot up.

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?

So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reloading software and reset to original factory settings.

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reseting to original settings and reset the operating software. Any ideas?

Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

IPhone 4 - tried updating with new software and now it's asking me to plug it to iTunes. The problem is that my laptop is dead. Is there anything I can do now? Thank you for help!

iPhone 4 - tried updating with new software and now it's asking me to plug it to iTunes. The problem is that my laptop is dead. Is there anything I can do now?
I Don't know if I can turn it of or do I just leave it and take it to service?
I'd appreciate some advice!

Same thing happened here ~ tech guy at a local authorized Apple repair store said it had something to do with improper backup from which the restore would be made. Still have a phone that asks to be connected to Itunes but won't do anything else . . . frustrated.

I have been trying to update my software and since I changed my password, nothing works. I am now updating again and don't know what to do.

I have been trying to update my software and since I changed my password, nothing works. I am now updating again and don't know what to do. I am prompted to contact the Itune store and get this song and dance to get here and still the software such as purchased apps hang but don't update or mount.

What password?
What update?
Step by step, specifically what are you attempting to do?

I just updated to the new software and now my app Store is not working It is just a white blank page

I just updated the new software and now my app store will not work I have shut it down and opened up again and nothing just a blank white page ?

I'm having a similar problem.
New iPad with iOS6 just downloaded.
I cannot purchase any new items from the new Apple Store now!
It keeps asking me to fill in CC details, asking for security number, but stays red when i fill in the 3 numerals and when I click done I get a Time Out message.
This is not good Apple!!
Looks as if I will have to use my iPad One to purchase from the Apple Store.

I installed iTunes 10.5.3.3 and now my DVD player won't work.

I installed iTunes 10.5.3.3 and now my DVD player won't work and has this error:
This device cannot start. (Code 10)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
Any ideas why iTunes renders my DVD drive unusable? I have uninstalled and reinstalled iTunes and when reinstalling I had my device manager open and saw during the installation how my DVD player went from accessible to not being able to start.
Why is this happening?
Here is my computer information:
Dell
Latitude D630
Intel Core Duo CPU T770 @2.40 Hz
4.00 GB RAM
32-bit Operating System
Thank you,
Kelly

There's a few different possibilities with a code 10, Kelly. To narrow in on the likeliest culprits it would help to have a closer look at your system.
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

I installed mountain lion and now my kodak printer is not working. Any sugestion please

i installed mountain lion and now my kodak printer is not working. Any ideas? please help

What errors do you see? The /var/log/cups/error_log file might have some more information.

I just installed CS 6 and now my Acrobat Pro is crashing. I marked several spots to redact and when I applied the redaction, it crashed and produced a report. How do I get it to stop crashing.

I just installed CS 6 and now my Acrobat Pro is crashing. I marked several spots to redact and when I applied the redaction, it crashed and produced a report. How do I get it to stop crashing? I am on OS 10.9.4

Report the problem to Adobe Acrobat Support along with sample PDFs and detailed description of the steps you perform.

I was messing around with .kext files in the MacintoshHD and now my MacBook Pro won't start up.

I was messing around with .kext files in the MacintoshHD and moved the system.kext and two others to my desktop and deleted the originals and now the MacBook Pro won't start up. All I get at start up is the apple icon then a bunch of text shows up part of which says Mac OS version: not yet set. then the apple icon turns into the power icon and tells me to turn off the computer. I've tried reinstalling from the install DVD by holding down option when powering on and selecting the install DVD and it just goes to a white screen with the apple icon and stays like that. I didn't have the disk utility on my Mac before this happened because I deleted it to make room on my computer a while ago so I'm not sure if that's why it won't load the install DVD but anyone who knows the solution to this with out going to get it repaired would be greatly appreciated. Thank you!

Never mind my dad just found the original install DVD and that worked. Before I was using an install disc that Apple sent me for another issue I was having, but thanks for replying so quickly and trying to help on this Thanksgiving day!!!

Had to purchase two OS X system upgrades, new iPhoto etc. just to connect new iPhone 5 and now half my apps won't work. No rosetta and missing lost dogs pics from iCloud...HELP!

I had to purchase two OS X system upgrades, snow leopard and mountain lion, just to connect my new iPhone 5 and somewhere between uploading iPhone 4S pics to iCloud some important pics disappeared then installed new iTunes and purchased new iPhoto all just to connect new iPhone 5 and now half my apps won't work. No Rosetta to make apps work but its not as simple as upgrading apps and missing lost dogs pics from iCloud...HELP!

File a complaint with Apple for not giving adequate warning before upgrading OS X that it would render PPC programs dead.
That someone at Apple said requiring the iPhone 5 to have 10.8 (10.6.8 is the minimum actually) and in order to remain a loyal Apple customer they need to fix this mess and revert your machine and software back to 10.6.8
You see, 10.6.8 would have ran your iPhone 5 and ran your PPC based software, so whoever told you to upgrade to 10.8 was wrong and they need to fix your machine.
It can be reverted to 10.6.8 yourself.
How to revert your Mac to Snow Leopard
Most commonly used backup methods

Installed Yosemite...now my MacBook pro won't start up. Keep showing "Kernel Panic!" HELP!

installed Yosemite and now my MacBook pro won't start up. Keeps showing "kernel panic"
PLEASE HELP ME!

If you can't start up and log in in the usual way, try in safe mode.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Log in as an administrator to carry out these instructions. If you have only one account, you are the administrator.
☞ If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
If you're able to log in, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.

Tried to install yosimete software and now my MAC Pro won't work

Similar Messages

Maybe you are looking for