Tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery
tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery for two ouers. After the internet recovery the same problem with reinstalling OSX message
Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev
Similar Messages
-
This mini is operating OSX 10.6.8 and trying to update to Mountain Lion but upgrade stops and a black overscreen displays saying to power off and power on. The upgrade fails. What's the problem?
Hi Fred,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
I'm trying to reinstall my mountain lion, but it won't install on my regular disk
so, i have a problem.
When i tried to restart my Mac earlier today, I got the gray screen. Now i'm trying to reinstall my mountain lion, but when the install guide tells me to choose a disk to reinstall on, it says that my disk is locked.
please help, urgent!
thanks.No, you'll lose your data. Do you have a backup? If you don't use Time Machine, here are some cloning programs you can use to make a backup. Two backups are better than one.
Clone - Carbon Copy Cloner
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone Software – 6 Applications Tested -
Trying to download OSX Mountain Lion, but just says waiting all the time? Anyone know what this could be?
You are not specific with your problem or errors but one thing that always throws people off is as follows:
When entering you're login name you must use the entire login with carrier name such as [email protected] The field defults to just your name but not the carrier name. -
I shut down my macbook pro and now I started up and it started in the safe mode
I shut down my MacBook Pro yesterday and when I started up today, it keeps starting up in safe mode, what do I need to do?
Welcome to the Apple Support Communities
Does your Mac start properly in safe mode? If so, try resetting the PRAM > http://support.apple.com/kb/HT1379 This will reset the "boot args", so OS X should start into safe mode. Also, you should verify that the storage of the computer is OK, so open Disk Utility, select "Macintosh HD" on the sidebar and verify the drive. If there's a problem, start in OS X Recovery (holding Command and R keys while your Mac is starting) and repair it -
I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
Please can anybody help.
Cheers,
Dan_nz.There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
Mountain Lion can't install but won't let me quit the installer!
Mountain Lion can't install but won't let me quit the installer! How can I get back to the desktop?
I was having the same problem with my iMac. Couldn't left click with the wireless mouse, i tried all the steps above to no avail. I then tried to use another mouse, this time bluetooth and still had the same problems. I decided to see if my trackpad, which sits in the corner of my desk and never gets used, and then i realize that my cat is lying on top of the trackpad which was causing my problem the whole time.
I hope your fix was as simple as mine. -
On start up, says had problem shutting down mac book pro mavericks
on start up, said had problem shutting down, mac book pro mavericks 10.9.4
recently loaded dragon dictateWelcome to Apple Discussions!
I am wondering if your hard drive is failing? You might try downloading and running SMART Utility on it:
http://www.apple.com/downloads/macosx/systemdiskutilities/smartutility.html
You can download the demo and run it several times for free. It is somewhat more critical than Disk Utility, and may give you earlier warning of impending drive failure.
You might also want to run the extended version of the Apple Hardware test and see if you get any error codes.
From the way your hard drive is behaving, it sounds to me like there is something wrong with it. Since reinstalling the OS doesn't solve anything, you are likely dealing with some sort of a hardware issue.
Good luck! -
I downloaded the new iphoto to my macbook pro. Now when I open it, there is a message telling me that "your photo library is damaged or unreadable and cannot be opened. Please restore from a backup." What do I do I had 16,000 pictures.....PLEASE HELP!!!!!
Try download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. -
I have a Macbook Pro that I have just renewed and transferred over my old hard drive (also from a Macbook Pro). Now when I turn on the computer and ITunes opens I get error (-50) and then error 5002 when I try to sign in to ITunes Store - Help!
My dealer has tried and failed (twice) to correct this and I have tried deleting the two items in the Itunes folder but no luck!were you able to get help on this? I need help on error 5002 as well. thank you
-
AirDrop used to work between my iMac and MacBook Pro. Now, when I try to transfer a file (either direction) I get a message that my certificate is invalid or that the file has not been accepted. What do I dot correct this?
Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186 -
10-27-13 I downloaded the new OS to my MacBook Pro. Now, when I address an email, it puts the address in there twice. How do I stop that, please? Thank you
Thank ypu for your thought.
Yes, I do have it turned.
When I type the first few letters of the address, it shows the correct address. When I hit <enter>, the name appears in the address section twice. Only began to happen after the downloaded update.
Cheers,
Joe -
I am having problems shutting down my MacBook Pro. I go to the apple and click shutdown or restart, it appears the shutdown process starts, the screen goes blue and the little circle keeps going round and round, but nothing happens even after 30 minutes.
Make sure you quit all your applications before shutting down.
And try resetting the SMC.
Intel-based Macs: Resetting the System Management Controller (SMC) -
I just brought a brand new Macbook pro retina display, when i connect it to my apple tv through airplay its too slow and when it try to play a movie apply tv is always a minute or 2 behind. How can i fix this?
Hello HanaAmer1,
We've an article which provides troubleshooting steps that can help get AirPlay workign correctly.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Cheers,
Allen -
Does anyone know of a way to force quit Mail. It is preventing me from restarting or shutting down my MacBook Pro running Maverick iOS 10.9.
Thanks.itsKeef,
You're having the same problem? Do you ALWAYS have to Force Quit Mail or will it sometimes just Quite when you select Quit? Which model MacBook Pro do you have (e.g., "15-inch Late 2011"), which version of OS X are you running and which version of Mail do you have?
Clinton
Maybe you are looking for
-
Things I cannot make work in FCPX - Hoping somebody can tell me I just missed it
Ok reading this after typing I think this is mostly a feature wishlist for the next version - outside of things already discussed like XML export. 1. Importing footage that is on a different disk duplicates the original media. I have the same problem
-
Workflow Inbox in Portal (UWL)
Hi, I am a workflow guy and was asked by my client to configure the workflow inbox to portal via UWL. I assume that this is a portal admin or basis admin work to be done. Pls confirm.. I have a document on this subject .. https://www.sdn.sap.com/irj/
-
No procedure/function decomposition in packages in Rel 2
I noticed that one of the changes since the last release was: "View Package Spec and Body - now decompose to display procedures and functions " I tried doing this in Rel 2 but there is still no decomposition of procedures/functions.Maybe I have misun
-
Word 2007: Error when saving file that contains equations
Using Microsoft Word 2007, version 12.0.6425.1000 with Service Pack 2 I am a High School Math teacher, and when working on a document that contains a number of math equations. When I try to save the document, Word refuses to save. It displays the fol
-
Listener refused the connection with the following error: ORA-12500
Hi, We had had some difficulties with our portal lately. All of a sudden portlets failed and started givin error messages all over our webpages. I tried to login to EM Console to try and restart Portal OC4J and got this error An error was encountered