Tried to upgrade and after uninstalling and reinstalling several times, keep getting "procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" Error 7.....Help, please??
Tried to upgrade as instructed and after uninstalling and reinstalling (even back to the former iTunes which I was happy with)several times, keep getting message "Procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" "Error 7". Help, please??
Entry point errors can usually be fixed by deleting the offending dll, then repairing the component it is part of from the programs and features control panel. Unfortunately you neglected to include the detail of which dll is mentioned.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2
Similar Messages
-
Tried to update iTunes. After downloading I get this message: Procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQLite3.dll ?? What does that mean?!
Found this several months ago when I updated ITunes. I don't know why they still haven't fixed this, but I had to do this again yesterday 10/13/2011 when I updated.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear. -
I downloaded Firefox 4 yesterday. I used it and had no problems. I started my computer today and clicked the Firefox icon and got the message "The procedure entry point NS_Set DLL Directory could not be located in dynamic link library Xul.dll" .I tried to shutdown and restart and got the same message.I use Norton Security. Could it not recognize Firefox 4 and done this?
'''Edit: '''That was a lot of questions. You might want to just re-run the Firefox 5.0.1 installer to see whether that corrects what appears to be a mismatch of files. I suggest saving the installer to the desktop, restarting Windows to ensure that all file locks are released, and then running the installer. As always, you can download from here: http://www.mozilla.com/firefox/all.html
In your other post, you wrote "I just downloaded FireFox 5.0 today, and none of the icons on my desktop will open. This is the message that I receive. The procedure entry point NS_Set DLL Directory could not be located in dynamic link library Xul.dll."
Can you describe what happens in these different scenarios:
(1) Start Firefox with its own program icon. Error dialog, but Firefox runs normally after you dismiss it? Or no error? Or Firefox won't start?
(2) Firefox not running, double-click shortcut to web site on desktop. Error dialog but Firefox loads the page after you dismiss it? Or Firefox doesn't load the page? Or Firefox never loads??
(3) Firefox running, double-click shortcut to web site on desktop. Error dialog but Firefox loads the page after you dismiss it? Or Firefox doesn't load the page? Or Firefox dies??
(4) Double-click unrelated desktop shortcut. Does this give an error as well?
If you've noticed effects with links in documents or emails outside of Firefox, that could be a clue as well. -
I get the following message:the ordinal 459 could not be located in the dynamic link library. urlmon.dll. I get this when requesting list links within a genealogy program (not on the internet) Haven't noticed it on anything else yet because I have been obsessing over just that one program. At the same time I notice that my windows sidebar is not visible. Have not changed any settings. Java was disabled due to the recent exploitation. Would that have something to do with it. Or perhaps Firefox18 installed and then it went bad? Thanks in advance for any help. Running Vista.
If this issue is caused after you have applied MS13-008 which is a security update then I would think that this is a Firefox issue and that something changed and they have to find a new way to do what they where doing before the update.
However since the error message states it can't find the file urlmon.dll has anyone checked on why this file is missing or why it is not registered? Since URLMON.DLL is not updated by MS13-008 I would suspect this could be a coincidence.
Here is a related Microsoft KB article about that dll causing similar issues with IE and how to address it.
http://support.microsoft.com/kb/281679
I mean a quick google of that exact error message "The ordinal 459 could not be located in the dynamic link library urlmon.dll" has results of this problem going back to at least 2011 long before MS13-008 was released. There are a number of solutions as well for different situations posted.
It may be worth checking some of those is the Microsoft KB above doesn't help.
And yet I am left thinking that Tyler's statement from January 16 about it being reported by other uses and apparently being caused by malware is the most likely reason for this issue. He does know Firefox rather well, and he is an employee of Mozilla. So I really would start with his suggestions of checking out their KB's he listed:
https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware
https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems -
i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
When trying to update flash..getting "procedure entry point setdiidirectoryw could not be located in the dynamic link library kernel32.dll"
this is a mere adobe bug - they changed the installer & it wont support installation on windows 2000 system any longer. adobe doesn't seem as it is going to fix this bug, see [https://bugbase.adobe.com/index.cfm?event=bug&id=3120661].
you might want to try this installation method provided by a 3rd-party-site: [http://www.ortwinpinke.de/en/2012/03/13/install-adobe-flash-player-11110262-and-later-under-windows-2000/]
please note that mozilla firefox won't support the windows 2000 platform any longer after the release of version 12 of the browser & the system is no longer supported or kept up to date with security fixes by microsoft too. in order to keep your computer & personal information on it safe you may consider upgrading to a newer system. -
I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.
Hi 49balf,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy -
Folks
I run an iMac. Today for some reason when I run the cursor across the screen applications and files are highlighted and then opened without me doing anything (no clicking etc) In fact print at times opens. As far as I can tell I have not changed any settings except to open firewall.
I run MacKeeper and when I run a scan only a few cleaning items open. Safe and fast are as they should be. I run fix. If I again run the scan I get a few more but different claeing items to fix.
I have rung MacKeeper several times without getting through. The occasion I did get through the bloke said he could not help and passed me to a higher authority. Needless to say the line dropped out after 30 minutes waiting.
As it is the weekend and I do not live near an Apple store I am quite keen to get the problem identified and fixed so I can continue working.
Your assistance please.Remove the "MacKeeper" scam product as follows. First, back up all data.
"MacKeeper" has only one useful feature: it deletes itself.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.
☞ Quit MacKeeper before dragging it to the Trash.
☞ Don't empty the Trash. Let MacKeeper delete itself.
☞ Don't try to drag the MacKeeper Dock icon to the Trash. -
When opening Windows 7 I'm receiving the following message The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.......I have never rec'd this before............I have a iPhone and iPad...............How can this be corrected without interferring with the information on my computer? Thanks
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
I am gettting the error message:
itunes the procedure entry point ?videotracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0a@VCrashonoverf low@2@@***@@xz could not be located in the dynamic link Library C:\Program files (86x)\Common Files\Apple\Apple Application Support\Webkit.dll.
After I get this error iTunes will not open, and does not respond
I have't been able to find any info on this can anyone help?Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99827) -
Problems before and after Uninstall and re-install CS4
I went ahead and uninstalled and re-installed CS4 because of freeze ups and other difficulties. Program After Effects is now crashing - see attachment. There is also a problem with an importer plugin (I think) may be related. I can't tell. I have not tried any other projects. I did however, disconnect the Matrox MX02 Mini, but still had problems. The MX02 is now re-connected.
I wonder if installing CS4 on top of CS3 is an issue? I remember having a similar problem goiing from CS2 to CS3. I had to downloader a cleaning utility from Adobe (I think) to remove every bit of CS2 and then run CCleaner.
It's my own fault - trying to upgrade software and hardware at the same time. It's hard to isolate. For now, I'l just have to do with Premiere since it is working. But, I'd sure like to know what's going on.Did you re-install all other Adobe products as well? If not, then that may be the problem. Uninstalling/ reinstalling only one of them messes with MediaCore and certain otehr functions. The quick fix is to download the manuala (!) update packages for After Effects, Premiere Pro/Encore and Adobe Media Encoder from the support pages and run them. This usually bends things in place. If not, then you will probably have to uninstall again, this time including every Adobe app, use the CS4 Clean Script and reinstall.
Mylenium -
Ituneshelper was not installed properly error 7, help!
i have uninstalled and installed many times, gone through how apple says to do the process, both manually and using the revo program, have done every step possible on the revo program more than once, and every time i install itunes it says ituneshelper was not properly installed, reinstalling may solve this problem, which it doesnt because i have tried that and tried rebooting my computer in between. ive been trying for like a week now to get itunes working and cant figure out how, HELP!
i have uninstalled and installed many times, gone through how apple says to do the process, both manually and using the revo program, have done every step possible on the revo program more than once, and every time i install itunes it says ituneshelper was not properly installed, reinstalling may solve this problem, which it doesnt because i have tried that and tried rebooting my computer in between. ive been trying for like a week now to get itunes working and cant figure out how, HELP!
-
Firefox quit working, reinstalled several times, only get spinning "connecting" word on tab.
Today Firefox quit working. I've cleared cache, flushed DNS, reinstalled about 3 times and each time after installing I keep getting the spinning wheel with "connecting".......but nothing happens. Is there any way I can get some help with this?
Thx,
Brett M1.Open Norton 360.
2.Click '''Task & Settings''' in the main menu.
3.Click '''Advanced Settings.'''
4.Click''' Firewall Protection Settings.'''
5.Click '''Firewall Program Rules''' tab.
6.Select Logic Server in the list.
7.Select '''Allow''' (not Auto or Custom) in the '''Access''' column beside Logic Server.
8.Click '''Apply.''' -
I had to go to Internet Explorer to print an invoice copy from Amazon.com. I've never had to NOT use Firefox before to do this. I lost some of the icons, apparently, and one was the one for print.
Please check for the issue in a new profile: [[managing profiles]].
-
I've been having massive issues copying mp4 video files onto my iPhone 4 from my windows 7 (64 bit) pc.
I converted a large number of avi files into mp4 using aiseesoft movie converter and most of them work just fine.
However about a quarter of the files with no Obvious difference in size and converted the same way will not sync.
Instead a message appears saying these cannot be played on the iPhone.
Also when then trying to use the iTunes convert for iPhone function It fails for unknown error 2002.
Any help on why this is happening and how to stop it would be greatly appreciated.
ThanksWhen the videos are in the Movie library, try using the Create IPod and iPhone Version in the Afvanced tab of iTunes.
Maybe you are looking for
-
Deposit on sales order can't include tax??
I recently posted a thread on prepaid invoices and thought I had my problem resolved. However after a little more testing I realized that B1 is not allowing me to enter a deposit amount for the full invoice amount (Total Before Discount and Tax amou
-
Cannot show PDF contain at Acrobat X standard
I have a PDF send from external parties, I open it from Acrobat X Standard, it shows a blank page on the screen. But it can normally print out the content from Acrobat X Standard and preview at Windows Explorer. I did repair and check update. Everyt
-
Using LIKE in a conditional statement
I'm trying to color code a column if another column is LIKE "1-%" but there isn't a like option. How is this accomplished?
-
Capturing the frieght from service PO to Create cost shipping document
Dear friends, We have got the service agreement with the transporters for transporting materials to our company. I created a Service contract. Then i release the Purchase order against the Contarct for the distance he transported. And i do service en
-
Supplier Quote fails creating PO when the Price is in different Currency
Hi Experts, We are working with SRM 7.0 in Classic Scenario. When the Bidders are allowed to BID in different Currency and the winning Supplier Quote with this new Currency fails to transfer to Backend and getting error as SE 134 XXXXXXXX (Item Descr