Tried to upgrade to osx 10.9 from 10.7 and I didn't notice that it downloads in the launcher. I turned my mac off and ever since then it has glitched out and will not download no matter what I do. I have had it for 3 years which is out of warranty.
Tried to upgrade to osx 10.9 from 10.7 and I didn't notice that it downloads in the launcher. I turned my mac off and ever since then it has glitched out and will not download no matter what I do. I have had it for 3 years which is out of warranty. It now has a blank bar under the launch pad and no matter how many times I try re-downloading it or restarting my computer it does not work. I use too play starcraft and other games on this computer although new patched/updates have made it that I can no longer do that now. Really frustrating having to deal with this especially after buying this computer upfront and now out of warranty.
Go to your Applications folder and find a file called "Install OS X Mavericks". Send it to the trash and delete it. Then try the download again.
Similar Messages
-
After a year of owning my iPod touch 4g it suddenly stopped charging on my computer and outlet addapter. It still shows the two pronged plug icon that recognizes the iPod is connected to something but even as the battery level goes below twenty percent it will not charge. Still functions well and even connects to iTunes.
If it is still under warrenty which you can find out from here or if you know it's under one year old bring it to the Apple Store.
https://selfsolve.apple.com/agreementWarrantyDynamic.do -
IPad was working fine & fully charged. Screen is now black & non-responsive. Is there something I can try or should I take to service center?
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
just got an Ipad and am working on setting it up. the one issue I am having with it is my screen will not rotate no matter what I do to the settings, I can't figure out if I have a setting wrong or if there really is something wrong with my Ipad. any help would be greatly appreciated.
Double click the home button (square) and all the things you did are there.keep sliding the bar that will come up on the bottom to the left till it cant go anymore there should be a icon looking like this.press that and it should work
Good luck hope it works. -
My ipod touch will not hare no matter what and I've tried many different cables and different ways to charge it. What should I do? If I complain to the Apple store co. will they replace my ipod for free?
- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar -
The update to iOS 7 is frozen at the Terms and Conditions page and will not move, no matter what I click on. I cannot access my iPad as it is frozen on this screen. How do I remedy this nightmare?
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
Then try updating the software again.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.
Same advice helped this user for the same issue > HT1414 tried to update to latest iOS...: Apple Support Communities -
I have a macbook pro 10.8.5 and the Application Safari will not open no matter what i do, I try to open the menu of Safari but it won't let me either, the mouse will just be loading. Each time i open it, it says "Application Not Responding" and I try opening it in my Finder and it'll say "The Application 'Safari' cannot be opened." and below that it'll say "-1712" Please help? I would really like to open it again.
The application Safari can't be opened -1712
What to do about "The application 'Safari' can't be opened" -1712 ? -
have an apple TV 1st generation - it froze downloading a trailer and had to be unplugged. Since then I cannot access the apple tv menu. When I run diagnostics it says it is operating properly but will not factory restore. What can I try?
Apologies, I was looking at the wrong schematic for the Apple TV 1. There isn't a button. So lets try this instead...
Remove the power cord and wait 20 seconds.
Plug it back in and let it boot (Give it 10 minutes, it's being tempremental)
Try and navigate to the the advanced menu and do a factory restore
If that doesn't work then if you are using the white remote hold down the menu button for six seconds and release this should bring up a hidden menu which will allow you to access the advanced configuration settings.
Again, if this fails there isn't much to do than tap it with a hammer to see if that fixes it (hard to believe how many times that actually works. (No responsibility taken if it breaks!, but at least you'd have a good reason to buy Apple TV 3) -
i have had itunes for years when i try to open it, it says i have missing files so i repaired it, then it said the same thing. so i went to download it again to fix the problem and it wants me to pay for a membership. is itunes no longer free?
iTunes is free... there is no membership fee.
Try providing some specifics about what is going on and others might be able to provide a resolution. -
I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?
I know what your'e going through, Gary. OSX 10.6.7 is an absolute disaster. Since I upgraded, I've had problems in FCP, Logic, Garageband, even issue dealing with peripheral hardware like external monitors.
Before 10.6.7 my system was running fine.
I've brought this up with Apple repeatedly. They smile and shrug. They've been helpful resolving the issues, but none of them has been easy to solve. I have spent days, dealing back and forth with tech support, sending logs, etc., before solutions have been found.
I wish I could give you an answer to your question. My only guess is that Apple has totally dropped the ball on this one. In the future they should provide a disclaimer when they offer an upgrade. Something like: "Caution: all of your software may not function after this upgrade. But go ahead, you'll feel cool that your OS is the latest thing."
As someone who has been with Apple for close to 25 years, I'm disturbed by what appears to be an increasing sloppiness in their work. This is especially disturbing when you depend upon their system to make your living.
Good luck.
david -
I have had Firefox for years and in the last 2 weeks, I am getting all of these stupid Pop ups about credit reports and some Epic Play thing. How can I make sure I do not get them and why all of a sudden?
Identify and remove adware/malware
http://www.thesafemac.com/arg/ -
I've been using my email to my IPad for months since I've bought it the I got a notice, In order to use Yahoo Mail, please turn Private Browsing off. Please go to Settings » Safari » Private Browsing, and turn it off....why now after all these months is someone trying to hack in?
You turn private browsing off on the Safari page. Tap the + sign in the upper right corner, then tap private in the lower left corner. You know you're in private when the top of the screen is dark.
-
i incidentally click ok and i didn't notice that i click ok to trash mi i photos now i cant opened ...this is what i get ---cantYour photo library is either in use by another application or has become unreadable.....i try to rebild library date base and nothing happen cant open iphoto any more
What did you trash? The iPhoto application, the iPhoto Library or just the photos in your iPhoto Library?
Also what version of iPhoto are you using?
OT -
I am trying to create an icloud account and have used itunes for years . Therefore have been using my apple id to sign in. Unfortunatly it keeps coming back saying this is my apple id but not my icloud id is this different?
Ive looked at help and it states its the same i have changed my passord several times as i thought it was this. Can anyone please help.??I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish -
Ipad has wifi connection but will not download
Hi, I'm having an issue with my Ipad 2 iOS 7.1.2, it only started happening last night. IPad can see and is joined to wifi but will not download or send anything. Always times out after spinning wheel.
Have tried connecting to and joined, various wifi routers in other houses. So know it's not the router. Still no Download or send.
Have done a hard reset.
Have reset the network settings.
Any other suggestions. I'm at a bit of a loss.
Oh and the iPad is away from my mac so can not reinstall or restore.Howdy PJRS,
It sounds like you are unable to access the internet on your iPad, but you are indeed connected to a Wi-Fi network. I would use the troubleshooting from the following article to help you get that resolved:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Unable to access the Internet while connected to Wi-Fi
If you're using a public or commercial network, you may need to log in or subscribe.
Check to see if you have a self-assigned IP address:
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected and tap .
If your IP address is 169.254.xxx.xxx, you may not be able to access the Internet.
If you do not have a self-assigned IP address, see if other Wi-Fi devices on your network have Internet access.
If they do not, consult with your network administrator or ISP for further assistance.
If they do, reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thank you for using Apple Support Communities.
All the best,
Sterling
Maybe you are looking for
-
How to find out the number of threads created under java vm at runtime
our application seems to have hit the max number of threads that can be created under vm and the vm will just hang after that. that behavior seems to be consistent from an article that I read earlier. I wonder any way that java app can find out the n
-
Changing my lumia 920 ringtone
When I try to change my ringtone nothing changes, I go to settings,select ringtone + sounds,press the ringtone box, select nostalgia it turns blue,check the ringtone box it says nostalgia,ringer on vibrate on,but when I ring my phone the ringtone th
-
Can't delete icons or drag icons off to the Recycle Bin.
We have one user who logs in to her laptop on our network - Server 2012 domain. She has domain user permissions but when she drags icons to the recycle bin for deleting she gets prompted for a user name & password. Does the user need permissions to
-
Authorization for limited vendor for user in FBL1n
Hi, I have certain user in my company, to whom, i want to give t-code FBL1N access. But for some vendors only. Please let me know, how it can be done.
-
Mild challenge -pivoting *multiple* columns per row using only SQL
Hello All, I'm in the process of learning the various pivoting techniques available in SQL, and I am becoming more familiar with the decode,function,group-by technique seen in many examples on these forums. However, I've got a case where I need to pi