Trouble Building New Workspace For Day 1 Projects
I am viewing the first day's lesson and am finding this course to be remarkably good for something that's free. I really like it! Thanks for providing it.
One confusing thing I encountered> Being an overachiever, I tried to follow along with the instructor when she created a new workspace and unzipped Day 1's files with all of Day 1's projects in it. In the version she is using in the video, there is no Day1.zip file, and so trying to follow her, I thought I was making some mistake and not building my workspace correctly or not unzipping my file correctly.
I finally figured out that it was different than what she was using and found instructions in the readme file that helped me set it up. Later, I found that the actual exercize at the end of the lesson was using the correct version of the zip file.
I'm not really sure what you could do, but possibly some sort of pop message on the video warning people not to try this yet might prevent others from trying to do it while watching the video and getting frustrated.
Again, GREAT COURSE! Thanks, mucho.
Keith Lavender
Helena, MT
Message was edited by: KeithTheKing - I changed the title to better reflect the issue.
Welcome to Arch Linux
That looks like it is a 2.6 kernel module
http://sourceforge.net/p/omnibook/bugs/58/
Did you try either of these AUR offerings?
ewaller$@$odin ~ 1001 %packer -Ss omnibook
aur/omnibook-git 20110911-9 (7)
Kernel module for HP OmniBook,Pavilion,Toshiba and Compal ACL00 laptops
aur/omnibook-svn-zen 268-1 (1)
Kernel module for HP OmniBook, Pavilion, Toshiba and Compal ACL00 laptops
ewaller$@$odin ~ 1002 %
Last edited by ewaller (2014-08-23 23:33:53)
Similar Messages
-
New Discussions: for day time use only? (-: A darker blue, please!
Thanks a lot Mods for your efforts.
I spend some time on these boards every day, so I can see things are going better and better.
I like the new Discussions better than the previous, especially everything that comes with this new ability to put much more on one page (like being able to see A LOT (not only five) of "Recent topics in this category", or that the topic's titles can be longuer than before, or being able to read the whole thread without jumping to "the next 15 posts" like before. I set "My Posts" to "50", this too was not possible before. Etc.)
Now my request:
At first I thought, like many others, that the "blue dot" and the "blue half-dot" were too small, and that we couldn't see the small grey "New!" because it was not red.
Now after all this time since Nov14, I finally understood what was wrong, because
(1) the new kind of eye fatigue I didn't experienced before, and
(2) a change in my computer's room lighting configuration.
The real problem is not the blue dot size (altough I'm sure if it was a square it would work better), it is its environment.
We have a white line after a light blue line, and this is a great feature to differenciate between topics. Works great within a thread too, to differenciate posts.
But one side effect of this is that the whole page "feels" slightly blue.
I'm not sure, but a human eye physicist could perhaps explain another kind of (more insidious?) side effect caused by the alternance of lines. Perhaps depending on which color are chosen for them?
Anyway, there is no problem with a page that "feels" blue, when the text is black.
The problem starts when the text ALSO is blue. Especially light blue...
I find the text blue color too light. Even the "visited link" purple is too light.
Given that the background is blueish, I mean. Otherwise it'd be fine.
This was not easy to understand, because the [defect/effect] is not obvious: the overall picture is nice.
But it became obvious to me when I saw that I have no problem IF I set my screen's brightess to "very bright".
New Discussions: for day time use only?
==> Please, would it be a problem (or too difficult to set perhaps?), to try a darker blue text for two or three weeks, see if we like it better? (along with a slightly darker purple for the visited links).
Thanks again for all the great work!
AxlHi Axl,
Some one had posted this about color,I do not remember who,sorry.
I thought it was interesting.Hopeful this color issue can be alter but deepening the colors as you & many have requested.
http://www.grc.nasa.gov/WWW/usability/colorcss.html
Good luck, Eme -
Revision: 14412
Revision: 14412
Author: [email protected]
Date: 2010-02-24 17:48:22 -0800 (Wed, 24 Feb 2010)
Log Message:
Added the Syndication.swc to the command line build config file for the AkamaiPluginSample project.
Modified Paths:
osmf/trunk/apps/samples/plugins/AkamaiPluginSample/AkamaiPluginSample-build-config.xmlI think it is not supported through ant script and you may have to contact Oracle Support. Please go through below thread (hisaak's reply) -
Re: Export OSB configuration jar file using Ant
Regards,
Anuj -
[svn:osmf:] 10556: Changed location of regions sprite to new package for media player project .
Revision: 10556
Author: [email protected]
Date: 2009-09-23 16:49:37 -0700 (Wed, 23 Sep 2009)
Log Message:
Changed location of regions sprite to new package for media player project.
Modified Paths:
osmf/trunk/apps/samples/framework/MediaPlayer/src/com/adobe/strobe/players/MediaPlayerWra pper.asPS: For the avoidance of doubt;
var ur:URLResource = new URLResource("URL_TO_MEDIA_PACKAGED_IN_PROJECT_TO_ELIMINATE_CONCERNS_OF_WRONG_URL");
Should be:
var ur:URLResource = new URLResource(URL_TO_MEDIA_PACKAGED_IN_PROJECT_TO_ELIMINATE_CONCERNS_OF_WRONG_URL);
But it still doesn't work! -
Trouble building kernel module for sensor support
Hi, I'm new here but have been using Arch for a while. Recently, I decided to install Arch on an old laptop (Toshiba A70) and have managed to work out most of the kinks to where it runs nicely. Unfortunately, ACPI support is spotty and the /sys/class/thermal directory gives me only cooling_device0. I installed the lm-sensors package and ran sensors-detect, which yielded no results. Although the laptop runs smoothly otherwise, I would like to know the CPU's temp so that I would be able to set up a fan control scheme and CPU scaling (so far it's stuck at the lowest frequency, and that's kind of a big deal for me since the laptop runs on an archaic mobile P4 chip).
Sorry for the story but I felt some context was necessary. I did manage to find a kernel module that would connect those sensors to ACPI for me (http://sourceforge.net/projects/omnibook/), however I'm having trouble building it on the latest kernel. Here is the output from running make:
make -C /lib/modules/3.16.1-1-ARCH/build SUBDIRS=/root/omnibook-2.20070211 modules
make[1]: Entering directory '/usr/lib/modules/3.16.1-1-ARCH/build'
CC [M] /root/omnibook-2.20070211/init.o
In file included from /root/omnibook-2.20070211/init.c:26:0:
/root/omnibook-2.20070211/laptop.h:25:3: warning: initialization from incompatible pointer type
.callback = dmi_matched,
^
/root/omnibook-2.20070211/laptop.h:25:3: warning: (near initialization for ‘omnibook_ids[0].callback’)
/root/omnibook-2.20070211/laptop.h:34:3: warning: initialization from incompatible pointer type
.callback = dmi_matched,
^
/root/omnibook-2.20070211/laptop.h:34:3: warning: (near initialization for ‘omnibook_ids[1].callback’)
/root/omnibook-2.20070211/laptop.h:43:3: warning: initialization from incompatible pointer type
.callback = dmi_matched,
^
// I left out most of the 'incompatible pointer type' warnings since they repeat for a while.
^
/root/omnibook-2.20070211/laptop.h:1001:3: warning: (near initialization for ‘omnibook_ids[108].callback’)
/root/omnibook-2.20070211/init.c: In function ‘dmi_matched’:
/root/omnibook-2.20070211/init.c:141:16: warning: assignment discards ‘const’ qualifier from pointer target type
laptop_model = dmi_get_system_info(DMI_PRODUCT_VERSION);
^
/root/omnibook-2.20070211/init.c: In function ‘omnibook_init’:
/root/omnibook-2.20070211/init.c:281:3: error: implicit declaration of function ‘create_proc_entry’ [-Werror=implicit-function-declaration]
proc_entry = create_proc_entry(feature->name, pmode, omnibook_proc_root);
^
/root/omnibook-2.20070211/init.c:281:14: warning: assignment makes pointer from integer without a cast
proc_entry = create_proc_entry(feature->name, pmode, omnibook_proc_root);
^
/root/omnibook-2.20070211/init.c:290:13: error: dereferencing pointer to incomplete type
proc_entry->data = feature;
^
/root/omnibook-2.20070211/init.c:291:13: error: dereferencing pointer to incomplete type
proc_entry->read_proc = &procfile_read_dispatch;
^
/root/omnibook-2.20070211/init.c:293:14: error: dereferencing pointer to incomplete type
proc_entry->write_proc = &procfile_write_dispatch;
^
/root/omnibook-2.20070211/init.c:294:13: error: dereferencing pointer to incomplete type
proc_entry->owner = THIS_MODULE;
^
cc1: some warnings being treated as errors
scripts/Makefile.build:257: recipe for target '/root/omnibook-2.20070211/init.o' failed
make[2]: *** [/root/omnibook-2.20070211/init.o] Error 1
Makefile:1333: recipe for target '_module_/root/omnibook-2.20070211' failed
make[1]: *** [_module_/root/omnibook-2.20070211] Error 2
make[1]: Leaving directory '/usr/lib/modules/3.16.1-1-ARCH/build'
Makefile:88: recipe for target 'omnibook.ko' failed
make: *** [omnibook.ko] Error 2
I have honestly no idea what to make of any of this and would really appreciate any help towards a solution. Thanks for readingWelcome to Arch Linux
That looks like it is a 2.6 kernel module
http://sourceforge.net/p/omnibook/bugs/58/
Did you try either of these AUR offerings?
ewaller$@$odin ~ 1001 %packer -Ss omnibook
aur/omnibook-git 20110911-9 (7)
Kernel module for HP OmniBook,Pavilion,Toshiba and Compal ACL00 laptops
aur/omnibook-svn-zen 268-1 (1)
Kernel module for HP OmniBook, Pavilion, Toshiba and Compal ACL00 laptops
ewaller$@$odin ~ 1002 %
Last edited by ewaller (2014-08-23 23:33:53) -
Need some help building a game for a school project
I have to build a game called quads.
My java knowledge is not the best there is, so i'm looking for some existing code i could use for my game.
Here are some game details.
- The game is played by 2 players (on the same computer).
- both players have 18 square stones.
- the stones are divided in 4 sides,
- each side can be shaped, with horizontal- or vertical lines, gray, or black
- http://213.73.158.54/plaatjes/stones.htm for some preview images
- player1 has only gray stones, player2 only black.
- both players have 1 white stone, wich they have to use first.
- the game is over when one of the players can no longer place one of his stones on the board.
What i'm looking for,
I'm looking for a source of a similar game, with:
- a mouse listener, with te option te rotate the selected stone (0, 90, 180, 270), and to move the selected stone.
- enable/disable stone collections. (take turns)
PS. if you don't know where i can find a source similar to this game, sites with game souces are also welcome.
Thanks alot :DOk, here's what i already have.
import java.awt.*;
import java.applet.*;
import java.awt.event.*;
public class quadsapplet extends Applet
//declaraties voor stenen
private Steen Steen1;
private Steen[] steentjesSpeler1;
private Steen[] steentjesSpeler2;
private Steen[] speelBord;
private static Image achtergrond;
private String plaatje;
private int vak1, vak2, vak3, vak4, x, y, xBord, yBord;
public TextField tekstvak1;
public TextField tekstvak2;
public TextField tekstvak3;
public Button knop;
public Button knop1;
//declaraties voor bord
private Bord bord;
public void init()
tekstvak1 = new TextField();
tekstvak1.setBounds(10, 550, 70,30);
add (tekstvak1);
tekstvak2 = new TextField();
tekstvak2.setBounds(300, 550, 70,30);
add (tekstvak2);
tekstvak3 = new TextField();
tekstvak3.setBounds(700, 550, 70,30);
add (tekstvak3);
knop = new Button("Verplaats grijs");
knop.setBounds(150, 550, 100,30);
knop.addActionListener(new KnopHandler() );
add (knop);
knop1 = new Button("Verplaats zwart");
knop1.setBounds(450, 550, 100,30);
knop1.addActionListener(new Knop1Handler() );
add (knop1);
setBackground(new Color(150, 156, 223 ));
steentjesSpeler1 = new Steen[18];
steentjesSpeler2 = new Steen[18];
speelBord = new Steen[36];
vak1 = 1;
vak2 = 1;
vak3 = 1;
vak4 = 1;
xBord = 200;
yBord =10;
x = 20;
// bord
//stenen speler 1
for(int i=0 ; i<18 ; i++)
steentjesSpeler1[i] = new Steen(Color.black, x, y, vak1, vak2, vak3, vak4, false, "3");
steentjesSpeler1.setArrX(i);
add(steentjesSpeler1[i]);
System.out.println("Steen "+(i+1)+" created!" );
plaatje = "./images/g"+(i+1)+".jpg";
achtergrond = getImage( getDocumentBase(), plaatje );
System.out.println(plaatje );
steentjesSpeler1[i].setafbeelding( achtergrond );
x += 70;
if(x>99)
x = 20;
y += 60;
//stenen speler 2
for(int i=0 ; i<18 ; i++)
steentjesSpeler2[i] = new Steen(Color.black, x + 630 , y - 540, vak1, vak2, vak3, vak4, false, "3");
add(steentjesSpeler2[i]);
System.out.println("Steen "+(i+1)+" created!" );
plaatje = "./images/z"+(i+1)+".jpg";
achtergrond = getImage( getDocumentBase(), plaatje );
System.out.println(plaatje );
steentjesSpeler2[i].setafbeelding( achtergrond );
x += 70;
if(x>99)
x = 20;
y += 60;
for(int i=0 ; i<36 ; i++)
speelBord[i] = new Steen(Color.black, xBord, yBord, vak1, vak2, vak3, vak4, false, "3");
speelBord[i].setArrX(i);
//speelBord[1] = new Steen(Color.black, xBord, yBord, 1,1,1,1, false, "3");
add(speelBord[i]);
System.out.println("Steen "+(i+1)+" created!" );
plaatje = "./images/"+(i+1)+".jpg";
achtergrond = getImage( getDocumentBase(), plaatje );
System.out.println(plaatje );
speelBord[i].setafbeelding( achtergrond );
xBord += 70;
if(xBord>550)
xBord = 200;
yBord += 70;
setLayout( null );
} // eind init()
class KnopHandler implements ActionListener
public void actionPerformed ( ActionEvent e)
String invoer1 = tekstvak1.getText();
int getal1 = -1;
getal1 = Integer.parseInt( invoer1 );
String invoerstring2 = tekstvak2.getText();
int getal2 = -1;
getal2 = Integer.parseInt( invoerstring2 ) ;
speelBord[getal2].afbeelding = steentjesSpeler1[getal1].afbeelding;
tekstvak2.setText("");
tekstvak1.setText("");
for (int teller = 0; teller<36; teller++){
speelBord[teller].repaint();
getal1 = -1;
getal2 = -1;
class Knop1Handler implements ActionListener
public void actionPerformed ( ActionEvent e)
String invoer3 = tekstvak3.getText();
int getal11 = -1;
getal11 = Integer.parseInt( invoer3 );
String invoerstring22 = tekstvak2.getText();
int getal22 = -1;
getal22 = Integer.parseInt( invoerstring22 ) ;
speelBord[getal11].afbeelding = steentjesSpeler2[getal22].afbeelding;
tekstvak2.setText("");
tekstvak3.setText("");
for (int teller = 0; teller<36; teller++){
speelBord[teller].repaint();
getal11 = -1;
getal22 = -1;
//tekenen van het bord
/*public void paint( Graphics g )
//bord.tekenBord( g, 172, 20);
//g.drawString(Bord.bord[0][0]);
My problems right now are,
- i can't select more than 1 stone
- i can't rotate 1 stone (i did rotate them all, but that's a bit useless)
- i can't make players to take turns.
- i can't move stones, i can only copy them...
So if i can't use source codes, does anyone know a tutorial for all this?
PS. sorry about the dutch code. -
SSHR : Build New Report For Submitted SITs in Process 'Pendning Approval'
Dear All ,
Good day ,
I am using Oracle HRMS 11.5.10.2 ,, I want to generate new report that get the data of the submitted SITs which not approved till now 'Pending Approval'
Could any one help what the tables save this data ??
Best RegardsAny Luck?
-
Trouble with new flash for mac os
I cannot get latest update of flash to work on mac os 10.6.8 (32bit) safari.
ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround
-
Oracle BPM for Network Management Projects
Has anybody used Oracle BPM for network management projects with millions of events?
Can Oracle BPM handle it?Please follow this step may this solve your problem.
please modify any thing in process "ExpenseReporting" for example any transition or any activity to place some where else or any other modification and then save that process. Then clean the project and build and deploy it.
if this also not solve the problem then export that project to and import it again in your workspace (Create new workspace or change the project name in same workspace ) and then again clean, build and deploy the application then test in work space.
Thanks,
Brijesh Kumar Singh -
Hi, am new to APEX and I got a new workspace for 10 MB and am working in SQL, PLSQL in my workspace in Apex. Also for my apex workspace I got a message that it will expire in 10 days, is that so?
Can i work in Java, as i wanted to practice Java and do a sample project. I hope Apex will be of great help in this regard. Can someone suggest me how to get a workspace for Java start my sample projects.
Thanks
Ambikaperhaps you want to google:
http://www.google.com/search?hl=en&q=jgrasp&btnG=Search
perhaps you want to read the getting started:
http://www.cs.unc.edu/~wardk/Comp14/jgrasp.html -
Hi All,
I created the workspace with this "c:\..\SAPIdE.exe"-data"newworkspacedir" format only. When i create the new workspace and import the alredy working project in the new workspace, all the old projects are sharing the old workspace not the new one.
I want to know the reason for this and also the way i created the workspace is correct or not. If any one of you know let me know please.
Thanks in advancekrishnaveni,
I guess you are not talking about the location of the newly created projects. Importing the already existing projects into a new workspace does NOT copy the project to the new workspace. It just creates a new project from an eclipse project in the file system.
If you are interested in having the location of the projects (newly imported) changed, then simply copy your projects from the old workspace directory and paste it to the new one.
~ Bala -
Advice on new PC for video editing
Hi!
I'm building new PC for video editing (Adobe CS6). System is based on Videoguys DIY9 recomendations (http://www.videoguys.com/Guide/E/Videoguys+DIY9+Its+Time+for+Sandy+Bridge+E/0xe9b142f408a2 b03ab88144a434e88de7.aspx) with few changes:
CPU: Intel Core i7-3930K 3.2GHz
MB: ASUS P9X79 PRO
RAM: Corsair Vengeance Red 16GB (4x4GB) DDR3-2133
Video: ASUS GTX 570 DCII 1280MB GDDR5 DP
HDD: Corsair Force 3 90GB SATA3 550/500MBs (system disk)
Seagate Barracuda 1TB SATA3 7200RPM 64MB (scratch disk)
PSU: CORSAIR AX850 80+ GOLD
DVD: ASUS 12D1S BD-R
Case: ANTEC P280
OS: Win7 Pro OEM
RAID: G-SPEED eS (RAID 5)
Any thoughts & suggestions on such configuration?
Thank you in advance!I made last updates to PC configuration (updates - bold) and soon going to buy. So... maybe final check:
CPU: Intel Core i7-3930K 3.2GHz
Cooler: Corsair Hydro H70
MB: Asus P9X79 PRO
RAM: Corsair Vengeance Black 16GB (4x4GB) DDR3-1600 CL9 1.35V XMP1.3
Video: Asus GTX670-DC2-2GD5
HDD: Samsung 830 Series 128GB SATA3 520/320MBs (system disk)
2 x Seagate Barracuda 2TB SATA3 7200RPM 64MB (scratch/cache/render disk) *
PSU: CORSAIR AX850 80+ GOLD
DVD: LiteOn BD-RE iHBS212-32
Case: ANTEC P280
OS: Win7 Pro OEM
RAID: G-SPEED eS (RAID 5, projects/media)
* Due to a limited budget, at the beginning I'll use HDD's in non-RAID configuration or will build RAID0 based on MB RAID controller -
OWB 11g try to create a new workspace
Hi,
I have the following problem:
I try to create a new workspace for a new user using Windows XP Repository Assistant
After setting name of the repos owner an the name of the workspace and add a name of 1 existsting schema as workspace user I got the error:
java.sql SQLException ORA-00942 Table or View does not exist.
Is there a patch or something else so that this error does not exist?
Please help me
Kind regards
SiegwinThank you for your hint, but ...
In Metalink there are no results for me.
This is my metalink address:
https://metalink.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(from=BOOKMARK&bmDocType=PROBLEM&bmDocDsrc=KB&bmDocTitle=Repository%20Assistant%20Fails%20With%20%22ORA-00942:%20table%20or%20view%20does%20not%20exist%22%20In%20Workspace%20Creation&viewingMode=1143&bmDocID=557067.1))
Do you have another address?
Thank you
Regards
Siegwin -
E17 SVN Builder, a new script for pacman to keep your E17 up to date!
I created a script called E17 SVN Builder because of what it does: create packages of E17 direct from SVN using the same PKGBUILDs as the Arch snapshots do. It came around because I was bitten by the Settings panel bug, which was fixed in upstream a few days after the SVN snapshot was taken. I wanted an up to date E17 install, so I created this script. Do NOT use it if you want your E17 install to be stable(r?)!
I just thought I would share this script since it works for me. Perhaps people could help me improve it?
Anyway, the dependancies right now are:
yaourt-git (I need it to fetch the PKGBUILDs for the images from CVS)
svn (to fetch the E17 code)
TODO:
- I need to get rid of the dependancy on yaourt-git by extracting the code for fetching the PKGBUILDs with it.
- I want to be able to use flags with this.
License: GPLv3
Version: 0.2
#!/bin/sh
# * E17-svn-builder *
# * A script to build E17 directly from SVN *
# * By smartboyathome *
VERSION=0.2
usage(){
echo 'E17 SVN Builder'
echo 'This is version '$VERSION
echo 'For now, this is a very simple script. It will fetch and build the PKGBUILDs for you. It is recommend you create a new directory to run this in, as it will pollute a directory with tons of files and folders.'
echo '-h, --help; Show this message.'
while [ "$#" -ne "0" ]; do
case $1 in
--help)
usage
exit 0
-h)
usage
exit 0
esac
done
buildpkg(){
echo 'Building '$_E17PKG'...'
# Check if the package directory exists, and if not, create it.
if [ -d $_E17PKG ]; then
cd $_E17PKG
else
mkdir $_E17PKG
cd $_E17PKG
fi
# Check if the PKGBUILD exists, and if not, get it.
if [ -d PKGBUILD ]; then
yaourt -G $_E17PKG
else
mv PKGBUILD PKGBUILD.old
yaourt -G $_E17PKG
mv PKGBUILD PKGBUILD.new | mv PKGBUILD.old PKGBUILD
cmp -s PKGBUILD PKGBUILD.new || mv PKGBUILD.new PKGBUILD
fi
makepkg PKGBUILD
mv *.pkg.tar.gz ../
cd ../
# Make sure there aren't any left over environment variables from a previous run or program. This keeps things clean. :)
unset _EXTRA
unset _E17PKG
echo 'Would you like to build the e17-extra-svn packages as well? (y/n)'
read _EXTRA
# Remove all packages
rm *.pkg.tar.gz
echo 'Beginning to build e17-svn packages...'
#--- Begin building eina-svn ---
_E17PKG=eina-svn
buildpkg
#--- Begin building eet-svn ---
_E17PKG=eet-svn
buildpkg
#--- Begin building evas-svn ---
_E17PKG=evas-svn
buildpkg
#--- Begin building ecore-svn ---
_E17PKG=ecore-svn
buildpkg
#--- Begin building embryo-svn ---
_E17PKG=embryo-svn
buildpkg
#--- Begin building edje-svn ---
_E17PKG=edje-svn
buildpkg
#--- Begin building e_dbus-svn ---
_E17PKG=e_dbus-svn
buildpkg
#--- Begin building efreet-svn ---
_E17PKG=efreet-svn
buildpkg
#--- Begin building e-svn ---
_E17PKG=e-svn
buildpkg
echo 'Finished building e17-svn packages!'
if [ $EXTRA="y" ]; then
echo 'Beginning to build e17-extra-svn packages...'
#--- Begin building exml-svn ---
_E17PKG=exml-svn
buildpkg
#--- Begin building emprint-svn ---
_E17PKG=emprint-svn
buildpkg
#--- Begin building engrave-svn ---
_E17PKG=engrave-svn
buildpkg
#--- Begin building epsilon-svn ---
_E17PKG=epsilon-svn
buildpkg
#--- Begin building esmart-svn ---
_E17PKG=esmart-svn
buildpkg
#--- Begin building etk-svn ---
_E17PKG=etk-svn
buildpkg
#--- Begin building ewl-svn ---
_E17PKG=ewl-svn
buildpkg
#--- Begin building e-modules-extra-svn ---
_E17PKG=e-modules-extra-svn
buildpkg
#--- Begin building elitaire-svn ---
_E17PKG=elitaire-svn
buildpkg
#--- Begin building entrance-svn ---
_E17PKG=entrance-svn
buildpkg
#--- Begin building exhibit-svn ---
_E17PKG=exhibit-svn
buildpkg
echo 'Finished building e17-extra-svn packages!'
fi
echo ''
echo 'All package building is complete!'
echo 'It is recommended you restart E17 after installing these packages.'
echo 'To do this, go to menu > Enlightenment > Restart;'
echo 'If you cant, then issue this command to restart it:'
echo 'enlightenment_remote -restart'
echo ''
echo 'Have a nice day!'
# Unsetting our variables so that we aren't messing with anything else. Also keeps things clean. :)
unset _E17PKG
unset _EXTRA
exit 0
Last edited by smartboyathome (2008-12-21 21:10:47)UPDATE! This package has had a couple changes:
- Repetitive stuff was condensed into one piece of code. Now, its much easier to read.
- I implemented extra differently. Instead of using a flag (which for some reason always sent me into a loop, I need more practice with scripting ), I just ask the person running the script whether they want to build extra as well as the core e17-svn stuff. Now it doesn't build them all automatically. -
LLDB: A new debugger for developers ... part of the LLVM project
I recently submitted https://aur.archlinux.org/packages/lldb-svn/ to the AUR.
The main website for the LLDB project is here: http://lldb.llvm.org/.
LLDB aims to be modular and easy to use and maintains much of the familiarity of GDB. This allows GDB users to quickly ramp up to start using LLDB.
LLDB is also able to disassemble machine code using LLVM libraries so as soon as new instructions are added to LLVM, they are automatically available in LLDB.
LLDB also has a large and active developer base and a larger customer base will get more bugs filed and hence better support for non-traditional distros like Archlinux. I myself am a long-term Arch user and even mentioning it at my workplace sparked quite some interest in the distribution.
The main motivation to submit this package was to get a larger customer base for the LLDB project that one of the teams were developing during my Winter internship at Intel Corporation, one of the main contributors to the LLVM project.
It does however take some time to build as it needs to build the LLVM libraries, the Clang libraries and then LLDB libraries/executables. If someone is interested enough to give it a try, please do and upvote the AUR submission and/or report any build/install problems and I will try to fix them.
Also, AFAIK, LLDB does not support multi-threaded executables yet. I am not sure since my internship ended a while ago.
Thanks!
Last edited by mtahmed (2013-05-01 04:05:36)B. I have only been given a QT file of the pilot, as to cut a rough idea of the trailer, which I will then have to redo with the original HD files, when I return to them tomorrow.
Well, this will make cutting more difficult. Because a low res version of the trailer will not have any timecode...nothing that references the main movie. So you will do the cut with the QT movie and then have to go back and eyematch-cut the trailer with the high res footage. Not fun and very time consuming. Not to mention that you will be cutting with the mixed audio of the trailer, including music and that will not sound right when you cut the trailer with the new music.
You need a QT version of the movie that contains the timecode of the original master (using media Manager to recompress to DV or other offline codec will do this), and you REALLY need to get split track audio. If they are record producers, they'll know what that is.
Shane
Maybe you are looking for
-
DOWNLOADED SOUND CLIPS FROM MY LG PHONE, THEY WON'T PLAY
I DOWNLOADED SOUND CLIPS FROM MY LG PHONE. THEY HAVE A .qcp AT THE END. WHAT APPLICATION DO I USE TO PLAY THEM ? DO THEY NEED TO BE CONVERTED TO SOMETHING ELSE?
-
Is there a way to package a file for print? Also help on die cut settings?
Hello! I've gotten myself in a bit over my head, I work at a very small company. I am the only one with design experience, and being somewhat fresh out of college, until this job I've had no print experience. So everytime I send something to them, I
-
Macbook Pro beeps on close lid -Bootcamp XP
Recently my Macbook Pro began beeping (like a system beep) a solid tone whenever i close the lid in windows xp, running under bootcamp. I have no clue how to fix it or why its doing it. The computer is of course trying to go to sleep when the lid is
-
I have a 2014 macbook pro, 2.5 GHz i7 processor, 16 GB RAM, running Mavericks (10.9.5). Since I've had it, kernel_task has always run less than 100MB with no programs running, and always less than 200MB even with several running at the same time. T
-
When I print coupons or e-mail from my hp psc 2210 all-in-one the font has changed to 6 where before it was size 10 or 12. I have made no changes in my printer settings nor any other changes that I am aware of. This happened after the latest update o