Trouble burning DVD in Final Cut Pro X (stops at 66%)

I have been trying to burn a DVD on Final Cut Pro 10.1.4, but I find that it always stops the burning process at 66%.  An error does not pop up; it just simply stops at the same place every time.  I have tried burning different projects of different lengths, I have tried updating Final Cut, I've restarted the computer, and multiple other things that I've seen others have said worked for them, but every time it always stops at 66%.  I have been able to burn about 6 or 7 DVDs successfully before this problem started happening, but now I can't get a single one to work. 
I seen where some said that this was a common problem in Final Cut when FCP X will hand the job to Create Disc to actually start the burn process, but I don't know how to fix it.
I've tried so many different processes to make it work; could someone please help!

Thank you for the reply!  I've been trying to burn each disk without an image for the menu, but I actually even seen where someone had said just to go into it and add a small picture for the background and then delete it and then hit share and that might get it to work. I've tried doing that multiple times, and it hasn't made a difference.  It still stops at 66%.   I didn't know if there was anything else I could try that might fix it.

Similar Messages

  • Trouble burning dvd in final cut pro x

    am having trouble burning my projects onto dvd's (even when I try to burn them onto the hard drive) and error message pops up saying, "The operation couldn’t be completed. (DSPPublishing error -29.)"
    I was told the type of dvd can play into it from DVD-r to DVD+R but why isn't it working even when i try and do it onto my hard drive.
    Anythoughts are greatly appreciated.
    This is happeneing for all my projects.

    version of final cut pro x is 10.0.7
    i believe i am burning directly to the disk...how do i make a disk image/ whats the difference

  • Burning a DVD with Final Cut Pro 10 stops at 95%, why ?

    Burning a DVD with Final Cut Pro X stops at 95%, why ?

    Stops completely? Mine stopped at 95% for quite a few minutes then finished.  This is usually the time in the process where the lead out is being burned and it will not show progress for some time.  If it is taking more than 10 to 15 minutes from that point you may have another problem.
    stephen

  • I am having an issue burning DVDs on Final Cut Pro X. After 15 minutes, I get a QuickTime Error:0. Anybody have a solution to this?

    I am having an issue burning DVDs on Final Cut Pro X. After 15 minutes, I get a QuickTime Error:0. Anybody have a solution to this?

    I'm sure the pros will be along to ask what your settings are.  Although this may not be exactly helpful, I did find compressor to be much more robust for burning DVDs.  This could partially be because it includes a template to convert you movie into correct DVD format.  I was quite pleased with the outcome after multiple failed attempts using FCPX alone.

  • URGENT HELP Burning DVD from Final Cut Pro

    I have a video due to buyers bye wednesday. If anyone knows how to take the movie I made and burn it to a DVD, please let me know as soon as you can. It wont let me export it to iDVD and when I try to "print to video" my camcorder only picks up the sound and not the video. I need help PLEASE!!!!!!!!! Thanks everyone. Zack

    For exporting to iDVD, chose FILE>EXPORT>QUICKTIME MOVIE (not quicktime conversion). Select SELF CONTAINED and USE TIMELINE SETTINGS. Then import this file into iDVD and when you click BURN, it will compress it to the DVD format for you.
    As for the Print to Video issue, look at the following list to see if it is one of these:
    Shane's Stock Answer #8:
    A simple path is mac > firewire > camera or deck > rca cables > tv
    Then start up your camera and tv, then open fcp.
    Then go View > External video > all frames
    Video playback should be Apple firewire NTSC (If you are using an NTSC set)
    Audio playback should be Audio follows Video
    Techinially, this should send synched video to your TV
    If for some reason you can't view your timeline on your external monitor, there are a few things to try:
    1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
    2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
    3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
    4) Click in the % box above the image and select FIT TO WINDOW.
    5) Go to VIEW->refresh A/V devices
    6) Make sure the Log & Capture window is closed
    If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
    For all the stock answers, click on this link:
    Shane Ross, "Stock Answers", 03:58pm Jan 13, 2005 CDT

  • Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

    Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

    As far as I know, motion templates can only be used with DVD Studio Pro. FCP X only lets you add a background image to the DVD menu.

  • How do i burn a dvd using final cut pro x

    how do i burn a dvd using final cut pro x?

    Use the Share button at the far right end of the Toolbar or File>Share>DVD.

  • When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

    When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

    There have been a lot of recent reports of difficulties sharing to DVD, but haven't been hearing about unreadable disks. Posibly there was an encoding error. Or it could have been bad media (blank disk).
    Does it play in your Mac?
    What brand of disks are you using?
    Russ

  • Final Cut Pro has stopped loading!!!

    Final Cut Pro has stopped loading!!! - I'm sure this is an easy thing to fix but every time I click on Final Cut Pro, the program begins to load, and at the final hurdle, it stops and returns to the dock as if I had never asked it to load in the first place. I tried to log in under a different account and final cut worked, but only for a while. I tried a previous 'help' tip by deleting the .plist to see if that helped but alas no.
    Thanking you in advance
    A

    Does it crash while the splash screen is up? If so, see what's loading when the crash occurs. There could be something corrupt in your project if it's past the splash screen and you have your preferences set to load the last project on setup. If this is the problem, do some searching here on corruption for some clues.

  • I can't burn a normal dvd from final cut pro.Help would be much appreciated!

    Hi.I am having great difficulty burning my final cut pro project to dvd.It is shot in HD and I have compressed it but when I burn a dvd it will not play in a normal/standalone dvd player.Could someone please tell me how to burn my project to dvd.Can HD film be burned to a normal dvd?The final cut pro file is only 1.3 GB.Any help/advice is much appreciated.Thank you.

    >Could you please tell me what the best settings to use when compressing to quicktime or if infact it has to be done at all?
    Matt has already told you twice; his first response (above) gave you step-by-step instruction.
    I'll spell it out for you again but with slightly more detail:
    1. In FCP, render the Sequence fully, then go to File->Export->QuickTime Movie.  (do NOT use "Using QuickTime Conversion).  In the export window, do NOT Recompress All Frames.  You can chose to make the movie self-contained or not.
    2. Use the resulting file in Compressor, where you will chose a DVD preset appropriate for your video's duration.  If needed, you can duplicate then modify any preset to better suit your needs.  Compressor will create two files; an MPEG-2 video file (.m2v) and a Dolby Digital audio file (.ac3).
    3.  Use the two files created by Compressor in DVD Studio Pro to author and burn a DVD.  Do NOT author an HD DVD as these will not play in DVD players.
    -DH

  • Burning a DVD from Final Cut Pro X via Compressor - No audio?

    I have attempted to burn a DVD from a Final Cut Pro X project using Compressor, however the result was silent. 
    I used compressor because my FCPx project is in NTSC and my DVD is for air on Australian TV (PAL).
    Image seemed to burn OK however there is no audio.  Can anyone advise what I may have overlooked?
    This is the first time I have used Compressor, and I am fairly new to FCP X.
    thanks,
    Geoff

    Thanks Russ.  OK, I am now rendering again via Compressor 4, this time I have 2 files in one tab - 1) a MPEG-2 and 2) an AC3 file.  Seems to make sense.
    To burn the DVD immediately after, I added a 'Job Action' to 'Create DVD' after the render, and the dialog confuses me.  No problems with the 'Job Action' tab, but the "A/V Attributes" tab indicates the follwing:
    Type:  Final Cut Pro.app  (shouldn't this be a reference to the rendered file/s?)
    Video - showing the same dimensions of my FCPx Project file (NTSC  ..640 x 480)  instead of the MPEG-2 (Pal ...720 x 576).
    Audio - Properties show Linear PCM... 6 channels, etc... not the AC3 file.
    My question is, how do I create a DVD from the newly rendered files output from Compressor - is the Job Action the way to do it, and if so, how do I get it to reference the new files?
    Thanks,
    Geoff

  • Burning a DVD from Final Cut Pro X for DVD player

    I created my video in Final Cut Pro X 10.1. I then exported it by "Share" to "DVD" and burned it to a Sony VDV+R disc. I needed 6 copies. Some worked when I put it in the DVD player to show on our TV and others said "Can't read disc" even though I followed the same process. What am I doing wrong and how can I export a video to a DVD to show on TV via a projector or DVD player. I am on a MAC OS X (10.9.2)

    Ditto to Gary's comment.
    Al

  • Can i burn a dvd with final cut pro trial

    is it possible to burn a dvd or share a project in final cut pro trial or does it need to be purchased first?

    Yes, you can encode and burn the disk with the trial version.
    Russ
    PS: There is no difference in functionality between the trial and paid versions.

  • Sync problem w/ DVD from Final Cut Pro X

    My project is a 2-hour play.  I improved the audio in ProTools then dragged it back into FCP.  I was able to get the improved audio to sync perfectly with the video (both are 48K), then mute the original audio.  I checked the whole 2-hour play for sync.  I burned a DVD, played it on my DVD player, and the audio gets ahead of the video around the 30 minute mark and keeps drifting.  Several DVD burns yield the same problem.  Any advice?

    Thanks Russ.  OK, I am now rendering again via Compressor 4, this time I have 2 files in one tab - 1) a MPEG-2 and 2) an AC3 file.  Seems to make sense.
    To burn the DVD immediately after, I added a 'Job Action' to 'Create DVD' after the render, and the dialog confuses me.  No problems with the 'Job Action' tab, but the "A/V Attributes" tab indicates the follwing:
    Type:  Final Cut Pro.app  (shouldn't this be a reference to the rendered file/s?)
    Video - showing the same dimensions of my FCPx Project file (NTSC  ..640 x 480)  instead of the MPEG-2 (Pal ...720 x 576).
    Audio - Properties show Linear PCM... 6 channels, etc... not the AC3 file.
    My question is, how do I create a DVD from the newly rendered files output from Compressor - is the Job Action the way to do it, and if so, how do I get it to reference the new files?
    Thanks,
    Geoff

  • DVB-C recorded DVDs to Final Cut Pro to DVD Studio Pro and Flash - how?

    As a TV journalist I am recording my works with my DVB-C Receiver and a DVD-Harddisc-Recorder from LG. The movies are stored on the harddisc and I burn them to DVDs in order to work with the files on my computer. What progrograms do I have to use in order to get file out of the DVD-vobs, that Final Cut Pro can read an work with. DVB-C is MPEG-encoded, right? But I don’t want to loose quality and don’t want to encode the material several times? In Final Cut I want to get rid of commerials and cut severel movies together that were broadcasted on several days. After that I want to get two differt files: 1. A flash movie form my website and 2. A file form my archive. With those files I want to complile DVDs with DVD Studio Pro for my customers later. Can anyone please give me a good and professional workflow to solve this common problem? Thanks a lot.

    What progrograms do I have to use in order to get file out of the DVD-vobs, that Final Cut Pro can read an work with
    MPEG Streamclip http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    -DH

Maybe you are looking for

  • Free Goods in Third Party

    Hi.. Please send me configuration steps of Free Goods in Third Party.. Thanks in Advance Shriniwas

  • 2011 MBP 15", how to install Windows 8 via USB?

    I successfully got my Windows 8 installation files on a USB. I just upgraded to Mountain Lion and no longer have the option to install Windows from another source. How can I install Windows 8 off my USB? BootCamp Assistant only offers the CD option.

  • Execute query. Not all records retrieved.

    Hi everyone. I have made a screen with the data block and layout wizzards. When I click on the default toolbar "Execute query" it brings only 68 records and there are about 25,000!. I have a botton which displays a LOV of the same table and the LOV i

  • IS_LOGICAL_HOSTNAME optag

    I saw in Sun Cluster Reference Manual for Solaris OS that there is an optags[b] IS_LOGICAL_HOSTNAME for command scha_resource_get(1HA). I wonder whether this optag IS_LOGICAL_HOSTNAME also works for Sun Cluster 3.0 or not. Thanks for any help.

  • Problems with the help menu.

    Hi. I'm a new iMac user and have had problems using the help menu on my computer. Every time I click on help and search a topic I get a blank untitled window. Nothing ever opens up in the window and then the spinning beach ball comes up. It is only i