Trouble exporting from FCPX

I have been trying to export a movie and keep getting this error: QuickTime Error: -50
Any ideas?
I tried uploading to Vimeo and also exporting to the desktop.
Both failed.

I tried deleting my preferences and the render files (as suggested in an earlier post) and exporting in Apple ProRes 422. Nothing has worked yet!

Similar Messages

Problems exporting from FCPX

I can not export from FCPX. Get stuck on 95% and I give up after 45 min. It´s about 15 min fotage that I tried to export in Apple TV3 format.

I've had this issue weekly with a show I produce. It bugs me for hours. In my case, I have to wait until the entire timeline is rendered, and then I have to export it to ProRes 422. Any other codec requires a re-render, which provokes the problem again. The problem starts when I take a few clips from my P2 and use the stability function along with any color correction topping them off with titles. It seems as though part of the rendering process involves re-analyzing the entire clip during rendering, and if I don't allow it to completely render the clips, I get missing video with graphics on top. I have a 12-core machine with 16GB RAM, and yet it still takes about two hours to render my 30 minute show after I'm done. This doesn't include the hours it takes to analyze the P2 clips as I import them, which also hinders me during editing and causes continual crashes. I'm hoping this new update I'm about to run addresses some of those issues.

Movies have stopped exporting from FCPX?? Urgent

I have recently done the update to Mavericks and since then my movies wont export from FCPX?
When I click export nothing happens and when try uploading striaght to youtube it come up with this.
The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
Anyone have any solutions got some deadlines to meet need help asap!!!
Cheers

http://www.apple.com/finalcutpro/specs/
This is the page that's probably relevant to you.
http://support.apple.com/kb/HT4664?viewlocale=en_US&locale=en_US
The requirements have changed a bit since the first version two and half years ago. It's also possible the software was simply copied onto the machine without being downloaded from the App Store.

Export from FCPX to Compressor 4 Failed - Quick time Error:-50

Hi all,
Having some trouble exporting a large video (1080p, about 5 gb) after using the Share>send to compressor option. Footage was shot with a Canon Ti3, and exported fine by itself to an .mov, but when sent to compressor I get the above error.
I have so far done the following:
trashed FCPX and Compressor 4 prefs
checked for updates
deleted the projects render files and rerendered
Any ideas? Screen shot below.
Jimmy

There have been many reports of QT- 50 errors on export at FCPX forum.
This may sound as though I'm changing the subject, but why not bring your exported movie into Compressor? It's always been a more reliable workflow than Send-to Compressor going back to the FCS days.
If you are committed to the Send workflow, try creating a new project and copy and paste from the old project to the new.
Russ

MPEG IMX 625/50 export from FCPX

Hi,
is there a way to export to IMX 50 (MPEG IMX 625/50) from FCPX directly or by sending it to Compressor 4 ?
FCPX manual says that it can work with IMX files but I cannot find a way to export to it. I have also looked through Compressor 4 manual and can't see this export option either. Please help.

Hi Tom,
maybe I am missing something here but I cannot see an 'export' menu in FCPX.
I've looked through the entire interface with no luck. I only see that share timeline range button:
which has really limited options to choose from.
In the File menu I only have the Export XML... Please don't mind if this is something obvious but I am still learning the whole new interface, which by the way is simply awesome!

Trouble exporting from Lightroom 4

While trying to export from Lightroom 4, I was getting the error message "An internal error has occurred:WIN32 API error 2, etc. Others have asked about this and the solution offered was to check "Do Nothing" in the post processing box, which I have done. Now I can export, but the image is severely downsized from being a full sized jpeg. How do I get it to export at full size? All was working fine with exporting until today

Thanks...the quality slider was at 60 - moved to 100 and it solved the problem. Simple - Thank you for suggesting - I was getting a headache trying to solve my issues today!

Trouble Exporting from Motion

I've been having problems exporting my Motion Projects out of Motion. I've been working on a 30sec spot 100% animated (no 3D), the project is set for DVDCPRO HD 1080i60 and I just cant get it out properly.
Fades that worked in the project are missing in the exported file, pictures somehow become corrupted/distorted in the exported file, and I have also noticed the top bar in leopard often turns partially or completely black after export, and motion crashes soon afterwards.
When exporting from motion I notice my processors aren't being used much. I have tired dropping the motion project directly into compressor but I get even more errors and strange green distortion on the exported file.
It takes about an hour and a half to export the 30 sec spot under maximum settings, (motion blur, frame blending, and all that) and I have an ATI RadeonX1900 with 512 VRAM.
Is my computer to underpowered, or my graphics card, or both? Suggestions please?

Hope you get some better advice soon. Meantime, try to copy and then paste some layers into independent projects, render them out as self-contained movies. See what happens to them. What you want to try to do is separate out pieces you can pre-render and then bring back in as movies. This eliminates tons of layers processing and might clear up some issues. Also helps you isolate issues with possibly corrupt media.
Can't help you on the Leopard stuff. We've had dozens of Motion/leopard conflicts posted over the last several months.
bogiesan

Why is QT not playing my movies which have been exported from FCPX?

Nov 11, 2012 1:07 AM Hello there. I have posted this post in Mac intel forums but have been redirected to post this post in FCPX forums and hence I am posting this thread here. Hope I will be given the proper answer to my problem/s which seem to be growing day after day.
I hope this is the right forum to place this post.
I have been facing this problem for the past 2 days only and I remember it all started after I had exported my latest project in FCPX. The exported file would not open up in quicktime player, and I started getting this notice even with other movies which were exported earlier and were being played by QT with no problem.
The screenshot given above came with with a movie I had exported about 2 months ago. At that time QT had no problem in playing it. But now, Why is it not able to play the same?
FYI, the latest project I had exported was started in fcpx 10-0-5 version and I had upgraded to the latest 10-0-6 version while the project was yet unfinished.
Apart from this problem, a number of other problems also have simulataneously raised their heads: FCPX is not opening up: stating that there is a corrupt data base which has to either restored or moved. And, when I try to move or delete the corrupt files via finder, I am not being allowed to delete them...error code -50 being the 'culprit'.
I am growing faint with all these malfunctioning and am in a perplexity of what to do next!
Any helps or guidance will be deeply appreciated.
Thanks. Take care.
iMac, Mac OS X (10.7.5), garage band, FCPX:10.0.6 version

Hello, hello, hello to one and all! Both the goose and Karsten's horse have been resurrected. HO HO HO am I on the top of the world. I feel that in asingle moment I have been transferred from the depths of the Dead sea to the top of Mount Everest!
What seemed to have worked is this:
I selected one QT movie which was not being opened and subjected it to PMan which did a rebuild and created an new repaired movie. I played it on QT and to my pleasant surprise it opened and I could watch the movie. There was one movie which was not being played in QT. I attempted to repair the same with Pman, but received a notice that it could'nt. It was not an important one and so I deleted the same. I tried playing other movies and found out that QT was playing the other exported movies which it was not opening earlier. Next, before opening FCPX I first opened the final cut events and deleted, or rather, was able to delete one particular event which I had been suspecting to be the cause of all these malfunctions: it was a still image captured on my daughter's Galaxy and she had sent the same to me via email a few days ago. I had imported the pic. into an event. When FCPX began its refusal to start misbehavior, it blamed this pic as one of the corrupt files which had to be restored or moved. Deleting this pic resulted in the resurrection of my works and I am taking no more chances in this matter. Right now I am in the process of duplicating completed projects on my scratch drive and archiving them in a different drive. I am duplicating them only with the used clips. Guess if any further clips are needed while rediting the work later, I could always import fresh clips into the event.
Thanks to all of you who have been helping me out in this thread. Any guidance as to how to avoit getting into this unpleasant situation will be received with attentive ears.

Strange glitch in my audio when exporting from FCPX.

I just finished my short film in FCPX today, and exported it. I used Apple's ProRes 422(HQ) format to export it using the "Export Using Compressor Settings" options. I was content with the video quality, however the audio was I believe to have been corrupted. I played my video in QuickTime X and on both my iMac and my MacBook Pro I can hear really annoying and distracting glitches that keep cutting up my audio and making the bass sound extremely weird. In the end, I put my video in iMovie, silenced out the audio and put on a track of the same song I was using in the original video. And just like I expected, the audio of the file that came out of iMovie did not have any of these weird glitches. Does anyone know what I might be doing wrong in FCPX that is casuing this problem or it might be something to do with the software itself? Perhaps bugs?

No, they are AAC audio files, 256kbps that I got from my iTuens library. So they need to be AIFF at 48k? Does the convert option to AIFF in iTunes satisfy this criteria? I am relatively new to audio formatting and related issues.

Trouble exporting from Premiere Pro 2.0 to FLV

Just installed Premiere Pro 2.0. I imported a sample clip (24p HDV from Canon HV20) and am trying to export as FLV. I did not have Quicktime installed when I installed Premiere, but have since installed QT 7.0 and upgraded to Pro (Probably a waste of money, but who knows).
I get the error "Cannot fine Flash Video export module for QuickTime. Please install and try again".
OS is XP 64 bit. I do not have Flash installed on this machine.
Ideas? This functionality is the only reason I went with Premiere over Vegas, so I really, really hope I can get it working.
Thanks in advance.

What are your export settings?

Trouble Exporting From FCP 5 to Motion

Hi, I'm new to this forum and have a question. I'm trying to export a sequence of clips from FCP to a motion project. The manual says File>Export>Export to Motion Project as a path but that option does not seem to exist. I've gone the "Send to Motion Project" route but there is no option to embed content that way. How do I send my work from FCP to Motion with embedding so the changes are refelcted in FCP? Thanks.

Thanks! I actually discovered it myself by accident just a minute ago. I was selecting the sequence in the browser before and that apparently doesn't work. Got it now though. Thanks for the reply!

Trouble exporting from CS4

I'm helping a friend on his Premiere Pro CS4 to put together a basic video. The capture format when we started it was HDV and I think (because I hadn't done it before and I really don't remember) I did it in DV NTSC 24p (which is silly since I'm in the UK, not North America). Any export attempt I make seems to squish the image horizontally, quite apart from having black margins around it no matter what I try.
Then I tried starting a new project, this time set to DV PAL and then copied and pasted my sequence from the other finished video into that, and exported it. So the image looked fine, but there was absolutely no sound.
Do I have to do this whole thing from scratch or can I salvage the work I've put into it already?
Help welcomed please.
Cheers

Again, I apologise for my ignorance on this.
I used "interpret footage" in AfterEffects but unfortunately that cause a further problem (the video sequence I created in PrPro includes a still image at the end, and when the footage is interpreted it splits that off so the size of the image no longer matches the footage as I created it).
Although I can't control the players other people use, I want to ensure the video I upload to youtube/vimeo and my website will be the right shape. Should I just import the sequence from PrPro to AE rather than exporting into a .mov format and then dumping that into AE?

Trouble Exporting from iPhoto

I'm trying to export my photos from iphoto. I'm exporting as original.
After about 400 pics it fail's saying unable to create... and then gives the path to the folder that I'm trying to export to.
Can anyone shed any light?
I do have some .avi's in iphoto.. about 20 of them.. could that be the reason?
Thanks,
Steve.

Export in batches of 100 and then you can start to narrow it down.
Or, alternatively, Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Can't export from FCPX!! (error -1)

Hi, I'm running FCPX 10.0.8 on a late 2012 iMac and I've got to get an edit out urgently for the client but I keep getting an error every time I try to export. I can't do anything with this video if I can't export it!!! I need help urgently.
I get the following message as attached:
The share operation Master File has failed.
The operation could not be completed because an error occurred when creating frame 1328 (error -1).
It's 1440X1080 ProRes 422 original footage AVCHD.
Any help on this?! It's urgent!
Btw I've already located frame 1328 and removed the clip that starts there. Still fails. Also tried copy/pasting it into new project and rendering it all again. Still fails.
Many thaks

Hi saddact,
I, along with many others are having the same problem. I am days behind on delivery of of a master disk for a client and thanks to FCPX 10.0.8, I have not been able to. I am currently "sharing" a masterfile and as of now it is working, I am at 73% . . .
First duplicated file, then the below . . .
Here is what seems to be working for me (fingers crossed):
Settings in Preferences set to under Playback / background render unchecked, under Destinations / Masterfile codec ProRes 422, . . .
Well forget that, just failed!!! "encoding frame error" one of many I have seen over the last few days!!!
I was able to export a codec set to H.264 last night, maybe I try that again.
Well I did not try deleting preferences this last time . . . try that along with the above.
Come on, lets get the updates right BEFORE releasing them.

Multi channel audio not exporting from fcpx xml as mono to logic always comes in a mixed surround

I have a long edit cut with 24 bit multi channel wav files (i.e 6 microphones on separate tracks but in a single wav file.)
This is very a very common production practice.
when i import into fcpx it defaults to seeing the files as surround. I change this to mono so i can mix and spit the audio between each mic.
The last step in the edit is to hand the mix off to the sound designer in logic.
however no matter how i export the xml file for logic. it always comes in as a surround file again instead of mixed mono files.
it shows up in logic as 6 tracks but all but generally only the top track has a mono mix of all 6 and the rest are blank.
it shows that all 6 are seen as 5.1 surround indicated by the icon.
interestingly if i just import the file directly into logic it comes in as 6 mono files. (the icon for mono showing and all are separate microphones)
Any ideas on how to get fcpx not to export the audio xml as surround? (it seems that it is locked to that on import no matter how i modify after)

Ok so i order to help anyone who is interested.
The only ironic solution to this problem i found was to use a plugin called xto7 to convert the xml to the old fcp7 format.
i then imported this into premiere pro.
this was then able to export an OMF that when imported into logic 10 that was using the correct 6ch mono setting as separate tracks.
Insane but it works until Apple fixes the incorrect meta data import in FCPX that sets the xml export to the default import that is always surround.
this is the only way i was able to send stems with all the edit points and fades for the sound editor.
If you don't have premiere lying around you maybe able to do it with fcp7 too we just didn't have it in this studio.
Fingers crossed Apple fixes the fcpx xml export.

Trouble exporting from FCPX

Similar Messages

Maybe you are looking for