Trouble printing multiple pages, not multiple images per page

I have just upgraded to PS Elements 10 and am having a challenging time printing multiple pages of the same document (image). These are labels that will be run, so we do 300 of the same image at a time, one per page (label). From the open Elements .psd file I choose print and set the printer settings, and then choose the amount of labels to print. No matter what number I put in for the Print X copies of each page, it still only prints one. When I convert it over to the organizer it seems to work with printing multiple copies. Having to move each file over especially if we are just wanting a quick test run is very time consuming and troublesome. It seems like there should be a simple fix that I am missing in the Elements program.

Hi,
Try following the steps below and check if that may help:
- Open the HP software by clicking the HP ENVY 5530 icon within the Desktop or the Start Menu, then click the Printer Home Page (EWS) link.
- Click the Network tab.
- Depending on your printer model click on Networking and then on Network Address (IP) or click on IPv4 within the active network connection type.
- Click on Manual IP , and then click Suggest a Manual IP Address . A manual IP address, Subnet Mask, and Default Gateway displays.
*Be sure to take a note of the IP address and Confirm the changes, then close the EWS page.
- Click the HP ENVY 5530 icon within the Desktop or the Start Menu and click the Utilities tab, then click on Update IP Address.
- Type the manually configured IP address, click on Save and confirm.
- Open the control panel and go to Devices and Printers.
- Right click the HP ENVY 5530 icon and select Printer Properties.
- Open the Ports tab.
- Click the Add Port button, select Standard TCP/IP and click on New Port.
- Follow the steps by typing the manually configured IP address and confirm the changes.
Now try printing and check if the issue been resolved.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Multiple frames in report - Need output on 1 page (not one frame per page)

Hi
I have a report with multiple frames and in the output they are printing one frame per page. How can i have one below the other and not have this page break?
Thx.

Check the following in frame properties:
Maximum Records per Page: should be 0
Page Break Before: should be No
Page Break After: should be No

Multiple images per page printing

I am trying to print 2 images per page..I've selected "multiple" and "pages per sheet:2"

I have a screenshot

Printing same photo multiple images per page

Using the new version how do you print the same picture 4x on one page?

Do the following:
1 - duplicate the photo so you have the number of photos that you want on a single page.
2 - select all of the duplicates and start the Print process.
3 - select the paper size.
4 - select the Custom layout
5 - select the aspect ratio ratio you want to have or a custom aspect ratio.
6 - adjust the width and height until you get the number of images per page that you want.
OT

Create a PDF with multiple images per page

So this seems really simple, but i cannot figure it out... i am creating a PDF from 30 JPGs and rather than having an image on each page in the PDF I would like to set it up so that there are 6 images per page... any thoughts .. thanks in advance
cheers
matt

Once you have the PDF with a single image per page, print it out to a new PDF with 6 pages per page.
Either that, or use an authoring application like Word or InDesign.

How can I create a one image per page caption sheet that includes the description in Bridge?

I am trying to find a way to create a one-image-per-page caption sheet for my workflow. I currently place each image into Word and copy the description onto the document, then repeat for each image. I am hoping that there is a way to automate this process using Bridge. I know that it can be done using Lightroom, however, that is not currently an option for me. Is this something that can be done or am I bound, like Sisyphus to Microsoft Word? I have a very limited grasp of scripting, but I feel like this is possible.
Thanks for any help.

To create a NetBoot image, you could just put the cluster node in target mode and attach it to your PowerBook. Then use SIU to create the NetBoot image.
If you're trying to create a backup image of the disk, use hdiutil, or put in in target mode and create the image with Disk Utility.

How can i print all the tab pages not just the first page (tab)

how can i print all the tab pages not just the first page (tab)

You would need to do this programmatically. Here's one way:
Attachments:
Example_VI_BD6.png ‏3 KB

Is it possible to datamerge more than one image per page?

I am building a product catalogue using datamerge. Is it possible to data merge more than one image per page? (ie I have a logo, product image and dimensioned drawing to go with each product page)
What would the coding be for the Data Field Name?
Would it be
@Logo
@Product Image
@Dimension Drawing
Add image fields in the data source file
By adding image fields to the data source file, you can allow a different image to appear on each merged record. For example, when you merge documents that include information from various companies, you may want to include an image of each company’s logo as part of the merge.
Open the data source file.
At the beginning of the data field name, type an “at” symbol (@) to insert text or paths that refer to image files.The @ symbol is required only in the first line; subsequent lines should include the image paths. Paths, which are case-sensitive, must follow the naming conventions of the operating system in which they’re stored.
If you get an error message when you type the @ symbol at the beginning of the field, type an apostrophe (') before the @ symbol (such as '@Photos) to validate the function. Some applications, such as Microsoft Excel, reserve the @ symbol for functions.
(Windows) Example of image references in data source file
Bill Tucker
36
C:\Photos\BillTucker.jpg
Dat Nguyen
53
C:\MyDocuments\dat.gif
Maria Ruiz
26
C:\Photos\Ruiz.psd
(Mac OS) Example of image references in data source file
Bill Tucker
36
Mac HD:Photos:BillTucker.jpg
Dat Nguyen
53
Desktop:Family:dat.gif
Maria Ruiz
26
Mac HD:Photos:Ruiz.psd
You can use InDesign to view the path of an image on your operating system. Insert an image in an InDesign document, and then use the Links panel to view the image’s location. With the image selected, choose Copy Info > Copy Full Path from the Links panel menu. You may need to edit the path after you paste it in your data source. This technique is especially useful for images on a server.

anna-rees wrote:
I am building a product catalogue using datamerge. Is it possible to data merge more than one image per page? (ie I have a logo, product image and dimensioned drawing to go with each product page)
What would the coding be for the Data Field Name?
Would it be
@Logo
@Product Image
@Dimension Drawing
Yes, pretty much exactly as you describe. You would then just add those fields to the boxes in your page. I tend to add an apostrophe before the @ symbol in Excel so it doesn't think it's a function - as per text you quoted above.
If you get an error message when you type the @ symbol at the beginning of the field, type an apostrophe (') before the @ symbol (such as '@Photos) to validate the function. Some applications, such as Microsoft Excel, reserve the @ symbol for functions.

34 pages at 13 topics per page

As stated 34 pages at 13 topics per page of my ipod does not play sound out headphone jack or other accesories. Dear mac I have the same exact problem. No sound out jack nor accesories and my ipod is now 4 months out of warranty. I am extremly gentle with my ipod which sits in a rubber case and never leaves that case. With this many people having the same exact problem why dont you do a recall and find a solution? I am a very loyal customer, I own two ipods and a imac. I also converted my girlfriend and her family over to mac users. With many people out there who have bought way more mac products than I, why would you not take care of us and recall this issue with the ipod? I got the same answer from both the store and your customer care, "sorry nothing we can do but service it, which cost as much as the ipod itself." Please offer some insight on this issue.
Sincerly
Ipod 30 gig video Mac OS X (10.4.9) no sound

"is now 4 months out of warranty"
You waited until it was out of warranty before you tried to plug in headphones?
I strongly recommend you buy from either a store that has a two or three year guarantee on electronics they sell (Best Buy) which you can buy for about $54, or, get Apple's extended warranty. Either way, you get more time to explore your iPod and make sure it is solid and okay.
I've learned this the hard way also.
- Ken

Printing multiple images per page

I'm sorry for this potentially stupid question, but how do I print multiple 4x6 images per 8.5x11 sheets - or in general, mulitple - defined size prints per page of whatever dimension. I have Aperture 1.1, iMac dual core, Epson 2200... I'll be back with many more stupid questions... bear with me!! T

Actually that's not a dumb question at all. Right now there's no way to say directly what size images you want on a page - you can only specify number of images on a page, and border sizes.
So what you do is figure out how many 4x6s can fit on your paper (2 on an 8.5x11.5 sheet of paper) and then figure out what border you need to get your images to be about the right size. In the case of 8.5x11.5, it's a border of about 0.75 in (perhaps a little more or less depending on the native border your printer has for a sheet of paper).
I think different orientations might screw that system up, so be aware of that and perhaps only print like orientations together.
If you are doing individual borderless prints of any size, do not overlook the handy "calibrate" button which prints out a test target to fine-tune exactly where the edges are in borderless prints!

Printing multiple copies per page, not multiple pages per sheet

How can I print multiple copies of page per sheet of paper?
I've got an image or PDF that I'd like to print 4 or more of per sheet of paper. But it can easily fit on one sheet. When I choose to print 4 copies and in the Layout section choose 4 copies per page what I get is for pages printed out with the image scaled down to a quarter of a page.
What I'd like is the one image scaled down and printed 4 times on a single piece of paper.

I don't completely believe that this is completely
due to the drivers from the printer manufacturer.
Nor did I say that it is. The software from which the doc is being printed is
even more important re page layout options.
Your statement of "It is a function of the printer driver..." is what led to that misunderstanding.
I completely agree that the idea of 'print to PDF' is misleading and that I was mislead that all the print dialog options (like the quartz filters that do work in outputting to PDF and the # of copies that do not) should apply to creating PDF files using the print dialogue. It now says 'save to PDF' in 10.4 instead of 'output' or 'print'. I think some of my confusion is carrying over from UI decisions in 10.3.
Obviously it wasn't designed to work this exact way
or it would work this exact way.
I have no idea what this statement means.
It's stating the obvious in reply to your statement of the obvious ("the feature you are trying to use isn't designed to work that way."). If it were designed to work in the manner that I was wanting it perform I would have never posted a question about it.
You can say it's not commonly done and that would
apply to anything other than printing off one full
sized copy of any single page. Using Quartz filters
isn't "commonly done" but it's available.
Not true... mailing labels, multipage spreads, thumbnails, reductions/
enlargements, ad infinitum are far more frequently done than printing
the same content on the same sheet multiple times. As I said, however,
there are provisions for doing so when the need arises.
You missed the point. Functionality is presented that is far less utilized than what I was desiring to do on this platform/set of applications as compared to other platforms/sets of applications. This is why I specifically mentioned the quartz filtering. I have personally met only one other person who uses quartz filtering yet I know over a dozen that want to print in the manner I originally posted about.
I'm sure you have seen such results & I have done
the exact same type of output hundreds of times on
both Windows & Mac platforms as well as others...
but not in the manner you are attempting to get it
done. As you've found out, that just doesn't work.
And I've seen it performed in the manner I was attempting, furthering the frustration.
In any program you typically do specify page layout
before number of copies... in fact, that is the cruxt of the
issue. But getting the same content to repeat on a single
page is not a matter of page layout and is not a function
of the print operation unless you're dealing with commercial
devices.
I guess I've just been spoiled by those big office Xerox machines. I never thought of that functionality being at all special in any way.
Thank you for the assistance.
PowerMac G4 Digital Audio, iBook G3 500, iPod, radioShark Mac OS X (10.4.3)

Can see only one photo per page. How to revert to multiple images per page?

First noticed on my iMac and now on my Macbook (10.4.9)--I'm no longer seeing a month's worth of photos on a single page. Only one photo per page, sometimes with miniature ones in the top border. I thought it was simply an inadvertent click on by part and easily corrected. But all attempts on both computers and reading of Help index haven't led to restoration of an entire page of photos and elimination of the annoyance. I'm wondering now if something I downloaded might have altered iPhoto program itself, making it impossible to view large numbers of photos at the same time. Any suggestions appreciated.
Cap

Cap,
This view, with the one photo big and the thumbnail strip across the top, is what happens when you double-click a photo with "Edit in: Main Window" set in the Preferences. There should be a button visible that says either Done or Return, to exit edit mode and return you to the library. If you still see only one photo, use the size slider in the lower right corner to reduce the photo size and get more thumbnails on the page.
If, for some reason, you can't exit the edit mode, you may have a corrupt preference file. Quit iPhoto. Use the Finder to navigate to Macintosh HD/ Users/ (your user name)/ Library/ Preferences/ com.apple.iPhoto.plist and move that file to the Trash. Launch iPhoto, and you should be returned to the main viewing mode. You'll have to go in the Preferences and reset them to your liking.
Regards.

Printing document as a "book" with two images per page

I am a new user and am struggling to take a 100 page text document with imbedded photos and print it like a "book." What I'd like to do is print using 2 images to a page (the same image) and duplexing, so that I essentially print two "books" that are duplexed (I will then cut the document in half) and then bind. I have not been able to figure out how to print 2 page 1's, then two page two's, etc., as a single print job. Can anyone help me?

Hi,
Not sure if I fully understand what you are trying to achieve, but this may help.
When you are in the book layout page over to the left you will see thumb nail images of your book layout. Starting with the cover and then inside cover and pages etc etc. Below this to the left are a row of icons, choose the plus "+" then scroll down to the bottom where you get a choice of "Duplicate page." Hope that helps?

I want a new tab to open as my home page not multiple pages

I want any new tab to open with my home page google and not multiple pages which are of no interest to me. It seems if you switch the option off you only get a blank page. If you use the add on feature it does not now work. this 'upgrade' is a nuisance.

'''Home page in New Tab'''<br />
There have been several ways suggested to do that, but the easiest for many users has been this add-on --> https://addons.mozilla.org/en-US/firefox/addon/custom-new-tab
'''Additional question/comment'''<br />
Paddy71 said: ''"If you use the add on feature it does not now work."''
If you are referring to the search in the Add-ons Manager (''Firefox button > Add-ons'' or ''Tools > Add-ons'') that problem seems to have been corrected late yesterday afternoon. If you are referring to something else, you will need to give more details about what you are trying to do, the steps your are taking, what are the results of your action(s), and what you expect as a results.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

ID CS3: Bulk importing one image per page then creating a new page

Hello,
I have a project where I have 8.5x11 sized jpgs I would like to bulk import into indesign one per page, and have indesign create a new page for each image automatically. Is there some kind of simple import function that can do this? I have so far not found an easy way to do this.
Thank you.

Actually there is a script by Olav Kvern for doing exactly this that comes with IDCS3. It's called "image catalog.jsx". You can access it from your scripts pallet.
The documentation with it is nil. See my post complaining about it and the author's answer in the scripting forum:
http://www.adobeforums.com/webx/.59b6d931/2
It actually works quite well, after you learn to work with it's limitations
Al

Trouble printing multiple pages, not multiple images per page

Similar Messages

Maybe you are looking for